Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Rotational velocity for oblique structures (Boltaña anticline, Southern Pyrenees)

  • Mochales López, Tania
  • Casas-Sainz, Antonio M.
  • Pueyo Morer, Emilio Luis
  • Barnolas Cortina, Antonio
Review article, [EN] Despite the large amount of paleomagnetic and structural studies on fold and thrust belts, many key questions about rotational kinematics remain unsolved (pace of rotation, subsequent accommodation of the hanging wall, etc.). Excellent exposure conditions and syntectonic sedimentation related to the growth of oblique structures in the Southern Pyrenees allow an accurate investigation that sheds light on the rotational kinematics of thrust systems. Fifty-nine paleomagnetic sites (819 specimens) are homogeneously distributed in both limbs along the marine and continental sedimentary sequences contemporary with the uplift of the Boltaña anticline and its post-folding evolution. They indicate a clockwise rotation of about 52 during Ypresian to Priabonian times. Primary, stable (350 -580 C), pre-folding magnetization in the Eocene rocks is attested by a positive fold test and the antipodality proof, with magnetite and iron sulphide traces as magnetic carriers. Rotation velocity fits a logarithmic model and shows a low rate during the Ilerdian-Middle Lutetian interval (ca. 1 /m.y.) and much higher (up to 10 /m.y.) in the Late Lutetian-Priabonian interval. Most of the clockwise rotation of the Boltaña anticline can therefore be constrained within the 42e35 M.a. interval (partially post-folding), indicating a period of strong differential displacement in the southern Pyrenean Zone, probably related to the emplacement of the underlying External Sierras thrust sheets (Tozal-Alcanadre)., This work was sponsored by a fellowship from the Geological Survey of Spain (IGME). Research financial support comes from the projects Pmag3Drest (CGL-2006-2289-BTE MEC, CGL2009-14214 and CGL2008-00809/BTE MICINN), ChronoPyr (IGME-346) and 3DR3 (PI165/09 Gob. Aragón). Bases Europa (CAI-DGA) funded Tübingen and Rome stays., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chronostratigraphy of the Boltaña anticline and the Ainsa Basin (southern Pyrenees)

  • Mochales López, Tania
  • Barnolas Cortina, Antonio
  • Pueyo Morer, Emilio Luis
  • Serra Kiel, J.
  • Casas-Sainz, Antonio M.
  • Samsó, Josep Maria
  • Ramajo, Javier
  • Sanjuan, Josep
[EN] The Ainsa Basin (south-central Pyrenees) is an exceptional example of a syntectonic foreland basin where structures oblique to the Pyrenean trend are well preserved. The absence of a complete chronostratigraphic frame motivated us to perform a detailed magnetostratigraphic study in the Ainsa Basin, including the shallow-marine–continental transition. Three sections covering almost the entire Eocene sedimentary fi ll were sampled (Ara, Coscollar, and Mondot ), covering 2450 m of the sedimentary pile, with more than 1000 demagnetized specimens (sample spacing of 2.7 m). Data from previous magnetostratigraphic studies (Eripol section) allow us to complete the Eocene rec ord with an 840-m-long profi le within the Bartonian–Priabonian interval overlying the sampled sequence. Characteristic remanent magnetization (ChRM) directions were effectively isolated between 300 and 500 °C. Magnetite is the main magnetic carrier, with variable iron sulfi de content and occasional hematite. Fold tests indicate a prefolding magnetization. Biostratigraphy based on shallow benthic foraminifera (15 localities) and a locality with abundant charophyte gyrogonites help to constrain the local magnetostratigraphic record (20 reversals) between the early Ilerdian and the middle Priabonian. A global correlation based on a magnetostratigraphic composite section derived from this work allows us to propose a complete chronostratigraphic frame for the Ainsa Basin infi ll between 55 and 45 Ma. Accumulation rates range from 2 to 53 cm/k.y., responding to retrogradational to progradational features during the early Lutetian, and a progressive increase from the middle Lutetian onward related to overall continentalization of the basin. Westward migration of subsidence is associated with progressively younger synsedimentary structures nucleating westward of the older ones in the South Pyrenean Basin., This work was sponsored by a fellowship from the Geological Survey of Spain (IGME). Financial support for research comes from projects Pmag3Drest (CGL-2006-2289-BTE MEC, CGL2009-14214, and CGL2008-00809/BTE MICINN), ChronoPyr (IGME-346), and 3DR3 (PI165/09 Gob. Aragón)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Kinematic approach by means of AMS study in the Boltaña anticline (southern Pyrenees

  • Mochales López, Tania
  • Pueyo Morer, Emilio Luis
  • Casas-Sainz, Antonio M.
  • Barnolas Cortina, Antonio
[EN] In this work we present AMS results obtained from several profiles in the Lutetian, carbon-ate-slope sequence located in the eastern limb of the Boltaña anticline. The AMS analyses allow us todefine the deformational events related to the formation of the Boltaña anticline and its progressiverotation during Eocene (Late Lutetian) times, acting as a passive marker of the deformation, after a veryearly record of LPS during diagenesis., Research financial support comes from the projects Pmag3Drest (CGL-2006-2289-BTE MEC and CGL2009-14214 MICINN), 3DR3 & GeoPyrDatabases (PI165/09 and CTPP01/07 Gob, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetic fabrics in the Western Central-Pyrenees: An overview

  • Pocoví Juan, Andrés
  • Pueto Abchuela, Óscar
  • Pueyo Morer, Emilio Luis
  • Casas-Sainz, Antonio M.
  • Román-Berdiel, T.
  • Gil Imaz, Andrés
  • Ramajo, Javier
  • Mochales López, Tania
  • García-Lasanta, C.
  • Izquierdo Llavall, Esther
  • Parés, Josep María
  • Sánchez Moreno, E.M.
  • Soto, Ruth
  • Oliván Pociello, Carlota
  • Rodríguez Pintó, Adriana
  • Oliva-Urcia, Belén
  • Villalaín, Juan J.
[EN] In the Western Central-Pyrenees numerous investigations during the past years have yielded an exceptional high density of localities (more than 700 sites) where the AMS and rock magnetic properties have been determined. This unique AMS dataset helps in understanding the orogenic evolution of the Pyrenees and its foreland basins. Processes related to AMS development in different structural units permit to identify: (i) an early recording of strain related to the transtensional or transpressional stages during the Early Triassic and Early Cretaceous, (ii) a moderate shortening related to the fold-and-thrust belt and foreland basin evolution during the Cretaceous–Tertiary orogenic stage, and (iii) a relatively strong deformation that produced cleavage related to the emplacement of basement thrusts in the Axial Zone during the Middle–Late Eocene. The main achievement of this contribution is the integration in cross-section and map-view of magnetic fabrics (orientation and parameters) in the western Central-Pyrenees, which allow constraining the processes affecting magnetic fabrics at the orogen scale. AMS results indicate: (i) a dominant bedding-controlled foliation, very sensitive to subtle layer parallel shortening (LPS) processes, especially in the foreland basins; (ii) magnetic lineations parallel to fold axes or strike of thrusts outside the cleavage front that can be deflected by vertical-axis rotations in particular areas; and (iii) an overall decrease of the definition of AMS fabrics (magnetic lineation or the anisotropy of the ellipsoid) associated with incipient cleavage and intersection lineation fabrics in the internal zones of the orogen. Therefore, AMS is a sensitive indicator to delineate the strain patterns at the orogen-scale, in particular, in those areas undergoing a modest degree of deformation., This study has been financed by the research projects CGL2006-05817 (PIRIMAG), CGL2009-08969 (BASINMAG), BTE2002-04168-C03-01, CGL2009-14214 and CGL2006-02289 (Pmag3Drest), CGL2006-02514 (Spanish Ministry of Science and Innovation and FEDER funds), UZ2012-CIE-11 (University of Zaragoza) and the financial support from the E27 Geotransfer and E72 Aquifer research groups (Government of Aragon)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

La geología de las Sierras de Santo Domingo y Salinas como recurso de desarrollo rural: identificación de Puntos de Interés Geológico y Propuesta de Plan de Gestión y Conservación

  • Sánchez Moreno, E.M.
  • Pueyo Morer, Emilio Luis
  • Longares Aladrén, Luis Alberto
  • Compaired, F.
[ES] Efin último de este trabajo es la integración de los valores geológicos de las Sierras de Santo Domingo y Salinas dentro de un posible Plan de Ordenación de los Recursos Naturales (PORN), como vector que fomente el desarrollo rural a través del aprovechamiento de los recursos naturales, concretamente el patrimonio geológico, como incentivo turístico., Este trabajo se ha financiado en el marco de varios proyectos de investigación del Plan Nacional de Investigación (Secretaría de Estado de Investigación) llevados a cabo los últimos años desde la Unidad de Zaragoza del IGME y por el Área de Geodinámica Interna de la Universidad de Zaragoza: Detachment folds and diapirs; recognition, reconstruction, restoration advanced methodologies (DR3AM). CGL2014-54118-C2-2-R. (2015-2018), Consistent 3D restoration in complex structures by using structural and paleomagnetic 3D references (Pmag3DRest) CGL2009-14214-BTE. (2010-2013). Así como por proyectos de la Dirección General de Investigación y Universidad del Gobierno de Aragón: 3D Restoration of complex deformed surfaces: Validation of methods for subsurface reconstruction from CT simulations and natural examples of South Pyrenean front (3DR3) PI165/09 (2009-2011) y por Pyrenean Geoscientífic databases: Concept, compilation and preliminar divulgation. INTERREG IIIb – Comunidad de Trabajo de los Pirineos CTPP01/2007 (2008-2009)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A computed tomography approach for understanding 3D deformation patterns in complex folds

  • Ramón, M.
  • Pueyo, E. L.
  • Rodríguez-Pintó, A.
  • Ros, L. H.
  • Pocoví, A.
  • Briz, J. L.
  • Ciria, J. C.
Analog models are an important tool for understanding complexly folded and faulted geological structures. In this paper, we propose the use of X-ray computed tomography to accurately reconstruct the geometry of analog models using an orthogonal reference system and to completely characterize deformation patterns within the modeled structure in 3D. The rheology and radiological contrast of various different materials have been studied showing that EVA sheets are a good choice to model buckling layers. After considering various possibilities to define the reference system, we opted to screen-print two orthogonal sets of parallel lines on the surfaces using minium (lead tetroxide). The model was then built with gOcad using a series of CT slices that can be closely spaced. This kind of model allows us to reconstruct the volume distribution of strain ellipsoids and can be very accurate and useful to ascertain the orientation of folded lineations in complex structures as well as to characterize the expected deformation on the surfaces. We have built a simple analog model inspired in the Balzes Anticline (located in the External Sierras, Southern Pyrenees) to illustrate the potential of the technique and to analyze the deformation patterns of this complex curved fold that has accommodated significant magnitudes of vertical axis rotation during its formation.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Rotational kinematics of a curved fold: The Balzes anticline (Southern Pyrenees)

  • Rodríguez-Pintó, A.
  • Pueyo, E. L.
  • Calvín, P.
  • Sánchez, E.
  • Ramajo, J.
  • Casas, A. M.
  • Ramón, M. J.
  • Pocoví,A.
  • Barnolas, A.
  • Román, T.
This study deals with how vertical-axis rotations are accommodated in thrust fronts. Studies on the rotational kinematics of fold and thrust belts are limited owing to the scarcity of the record of syntectonic rocks and other data required for 4D reconstruction approaches. We studied the Balzes anticline, a 17-km long, thrust-related, arc-shaped anticline with dense paleomagnetic sampling (75 sites) to unravel the origin of its curvature (about 50° of arc in map view). The availability of both synfolding and synrotational indicators enables us to decipher the complete kinematic history of the fold. Reliable paleomagnetic data (more than 500 specimens and about 1000 measurements) were obtained from Ypresian to Priabonian rocks, typically with six demagnetization steps. The ChRM is unblocked between 420 and 575 °C in most samples (85%), and at 675 °C in the others. The primary direction displays two polarities and passes the fold test. Vertical axis rotation values for the structure range from non-significant up to >. 80° clockwise. A strike vs. rotation diagram clearly relates this variability to the fold curvature (VAR = -. 46° + 0.5 * TREND R = 0.97]) and reveals the addition of primary and secondary curvatures. The original (primary) curvature is related to the emplacement of the thrust sheet underlying the Balzes anticline, it shows an obliquity of approximately 15° with respect to the expected Pyrenean trend. Progressive unconformity in the field (Santa Marina site) provides a record of a Middle. -Late Lutetian major folding event. The detailed analysis of the synrotational sedimentary record together with accurate temporal calibration based on previous magnetostratigraphic data allows us to date the rotation stage as Lutetian-Bartonian and to estimate the rotation velocity of the Balzes anticline to have been about 5.2°/Ma, both in agreement with previously published observations for the South Pyrenean front.