Pasar al contenido principal

ANALISIS DE PROCESOS Y FACTORES EROSIVOS EN ZONAS AGRARIAS DE NAVARRA MEDIANTE EXPERIMENTACION, MODELADO Y TELEDETECCION

CGL2011-24336

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2011
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSIDAD PUBLICA DE NAVARRA
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Assessment of soil factors controlling ephemeral gully erosion on agricultural fields

  • Ollobarren del Barrio, Paul
  • Campo-Bescós, Miguel
  • Giménez Díaz, Rafael
  • Casalí Sarasíbar, Javier
The soil factor is crucial in controlling and properly modeling the initiation and development of ephemeral gullies (EGs). Usually, EG initiation has been related to various soil properties (i.e. sealing, critical shear stress, moisture, texture, etc.); meanwhile, the total growth of each EG (erosion rate) has been linked with proper soil erodibility. But, despite the studies to determine the influence of soil erodibility on (ephemeral) gully erosion, a universal approach is still lacking. This is due to the complex relationship and interactions between soil properties and the erosive process. A feasible soil characterization of EG erosion prediction on a large scale should be based on simple, quick and inexpensive tests to perform. The objective of this study was to identify and assess the soil properties – easily and quickly to determine – which best reflect soil erodibility on EG erosion. Forty‐nine different physical–chemical soil properties that may participate in establishing soil erodibility were determined on agricultural soils affected by the formation of EGs in Spain and Italy. Experiments were conducted in the laboratory and in the field (in the vicinity of the erosion paths). Because of its importance in controlling EG erosion, five variables related to antecedent moisture prior to the event that generated the gullies and two properties related to landscape topography were obtained for each situation. The most relevant variables were detected using multivariate analysis. The results defined 13 key variables: water content before the initiation of EGs, organic matter content, cation exchange capacity, relative sealing index, two granulometric and organic matter indices, seal permeability, aggregates stability (three index), crust penetration resistance, shear strength and an erodibility index obtained from the Jet Test erosion apparatus. The latter is proposed as a useful technique to evaluate and predict soil loss caused by EG erosion., This study was partly financed by the Spanish Government’s National Plan for Research, Development and Technological Innovation (projects CGL2011-24336 (MICIN/FEDER) and CGL2015-64284-C2-1-R (MINECO/FEDER)). The authors thank the Public University of Navarre (UPNA) for funding this work with a grant awarded to the principal author.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Influence of surface roughness sample size for C-band SAR backscatter applications on agricultural soils

  • Martínez de Aguirre Escobar, Alejandro
  • Álvarez-Mozos, Jesús
  • Lievens, Hans
  • Verhoest, Niko E. C.
  • Giménez Díaz, Rafael
Soil surface roughness determines the backscatter coefficient observed by radar sensors. The objective of this letter was to determine the surface roughness sample size required in synthetic aperture radar applications and to provide some guidelines on roughness characterization in agricultural soils for these applications. With this aim, a data set consisting of ten ENVISAT/ASAR observations acquired coinciding with soil moisture and surface roughness surveys has been processed. The analysis consisted of: 1) assessing the accuracies of roughness parameters s and l depending on the number of 1-m-long profiles measured per field; 2) computing the correlation of field average roughness parameters with backscatter observations; and 3) evaluating the goodness of fit of three widely used backscatter models, i.e., integral equation model (IEM), geometrical optics model (GOM), and Oh model. The results obtained illustrate a different behavior of the two roughness parameters. A minimum of 10-15 profiles can be considered sufficient for an accurate determination of s, while 20 profiles might still be not enough for accurately estimating l. The correlation analysis revealed a clear sensitivity of backscatter to surface roughness. For sample sizes >15 profiles, R values were as high as 0.6 for s and ~0.35 for l, while for smaller sample sizes R values dropped significantly. Similar results were obtained when applying the backscatter models, with enhanced model precision for larger sample sizes. However, IEM and GOM results were poorer than those obtained with the Oh model and more affected by lower sample sizes, probably due to larger uncertainly of l., This work was supported by the Spanish Ministry of Economy and Competitiveness through scholarship under Grant BES-2012-054521 and through MINECO/FEDER, EU, under Project CGL2011-24336, Project CGL2015-64284-C2-1-R, and Project CGL2016-75217-R.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Influence of surface roughness measurement scale on radar backscattering in different agricultural soils

  • Martínez de Aguirre Escobar, Alejandro
  • Álvarez-Mozos, Jesús
  • Lievens, Hans
  • Verhoest, Niko E. C.
Soil surface roughness strongly affects the scattering of microwaves on the soil surface and determines the backscattering coefficient (σ 0 ) observed by radar sensors. Previous studies have shown important scale issues that compromise the measurement and parameterization of roughness especially in agricultural soils. The objective of this paper was to determine the roughness scales involved in the backscattering process over agricultural soils. With this aim, a database of 132 5-m profiles taken on agricultural soils with different tillage conditions was used. These measurements were acquired coinciding with a series of ENVISAT/ASAR observations. Roughness profiles were processed considering three different scaling issues: 1) influence of measurement range; 2) influence of low-frequency roughness components; and 3) influence of high-frequency roughness components. For each of these issues, eight different roughness parameters were computed and the following aspects were evaluated: 1) roughness parameters values; 2) correlation with σ 0 ; and 3) goodness-of-fit of the Oh model. Most parameters had a significant correlation with σ 0 especially the fractal dimension, the peak frequency, and the initial slope of the autocorrelation function. These parameters had higher correlations than classical parameters such as the standard deviation of surface heights or the correlation length. Very small differences were observed when longer than 1-m profiles were used as well as when small-scale roughness components (<;5 cm) or large-scale roughness components (>100 cm) were disregarded. In conclusion, the medium-frequency roughness components (scale of 5-100 cm) seem to be the most influential scales in the radar backscattering process on agricultural soils., This work was supported in part by the Spanish Ministry of Economy and Competitiveness under Grant BES-2012-054521, Project CGL2011-24336, Project CGL2015-64284-C2-1-R, and Project CGL2016-75217-R (MINECO/FEDER, EU).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Evaluation of surface roughness parameters in agricultural soils with different tillage conditions using a laser profile meter

  • Martínez de Aguirre Escobar, Alejandro
  • Álvarez-Mozos, Jesús
  • Giménez Díaz, Rafael
Surface roughness crucially affects the hydrological and erosive behaviours of soils. In agricultural areas surface roughness is directly related to tillage, whose action strongly affects the key physical properties of soils and determines the occurrence and fate of several processes (e.g., surface storage, infiltration, etc.). The characterisation of surface roughness as a result of tillage operations is not straightforward, and numerous parameters and indices have been proposed for quantifying it. In this article, a database of 164 profiles (each 5 m long), measured in 5 different roughness classes, was analysed. Four roughness classes corresponded to typical tillage operations (i.e., mouldboard, harrow, seedbed, etc.), and the fifth represented a seedbed soil that was subject to rainfall. The aim of the research was to evaluate and select the surface roughness parameters that best characterised and quantified the surface roughness caused by typical tillage operations. In total, 21 roughness parameters (divided into 4 categories) were assessed. The parameters that best separated and characterised the different roughness classes were the limiting elevation difference (LD) and the Mean Upslope Depression index (MUD); however, the parameters most sensitive to rainfall action on seedbed soils were limiting slope (LS) and the crossover lengths measured with the semivariogram method (lSMV) and the root mean square method (lRMS). Many parameters had high degrees of correlation with each other, and therefore gave almost identical information. The results of this study may contribute to the understanding of the surface roughness phenomenon and its parameterisation in agricultural soils., The authors are grateful to the Spanish Ministry of Economy and Competitiveness for partly funding this research through scholarship BES-2012-054521 and project CGL2011-24336.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Gully geometry: what are we measuring?

  • Casalí Sarasíbar, Javier
  • Giménez Díaz, Rafael
  • Campo-Bescós, Miguel
Much of the research on (ephemeral) gully erosion comprises the determination of the geometry of these eroded channels, especially their width and depth. This is not a simple task due to uncertainty generated by the wide range of variability in gully cross section shapes found in the field. However, in the literature, this uncertainty is not recognized so that no criteria for their measurement are indicated. The aim of this work is to make researchers aware of the ambiguity that arises when characterizing the geometry of an ephemeral gully and similar eroded channels. In addition, a measurement protocol is proposed with the ultimate goal of pooling criteria in future works. It is suggested that the geometry of a gully could be characterized through its mean equivalent width and mean equivalent depth, which, together with its length, define an “equivalent prismatic gully” (EPG). The latter would facilitate the comparison between different gullies., This study was partly funded by the Spanish Ministry of Science and Innovation (project CGL2011-24336).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Evaluación de la producción de sedimentos y calidad de las aguas en cuencas agrarias de Navarra, Evaluation of sediment yield and water quality in agricultural catchments of Navarre (Spain)

  • Giménez Díaz, Rafael
  • Casalí Sarasíbar, Javier
  • Díez Beregaña, Javier
The Government of Navarre (Spain) established a series of experimental watersheds on different sites of its territory in order to assess the impact of the agricultural activities on the environment. Hydrological/meteorological and water quality data are continuously monitored. In this paper, data recorded –precipitation, runoff, sediment, nitrate and phosphate– in two grain-sown watersheds (La Tejería and Latxaga) and in a third one (Oskotz) covered with forest and pasture (cattle-breeding) with a sub-watershed almost entirely under forest, are analyzed; the information covers a period of ca. 15 years. The inter/intra annual variability of the involved processes are studied as well as their impact on the water quality and on the ecosystem. The majority of the sediments yielded in the watersheds are registered during winter, though most of the erosive rainfalls occurred in summer. This is because of the easy-prone runoff that prevailed during winter due to the (much) higher water content of the soils in this period. The grain-sown watersheds –roughly similar at first view– present however important differences regarding sediment yield: 1800 kg/ha year at La Tejería and only 450 kg/ha year at Latxaga. This could be mainly due to differences in morphology, topography, and amount of stream channel vegetation between both sites. At Oskotz this figures are as a whole lower than those registered in the cultivated watersheds but eventually larger than those at Latxaga; this depending on the forest management (logging). Water quality is seriously affected at La Tejería with nitrate concentration constantly over critical threshold. By contrast, nitrate values are much lower in Latxaga watershed. However, phosphate concentrations were similar in both grain-sown watersheds corresponding to water with a significant risk of eutrophication. The cattle-breeding activity at Oskotz generated unexpected levels of phosphate much higher than those registered in the cultivated wathersheds., Estos estudios fueron financiados a través de los proyectos I+D CGL2007-63453 y CGL2011-24336 pertenecientes al Ministerio de Ciencia e Innovación del Gobierno de España. Los autores agradecen, además, la generosa contribución del Departamento de Desarrollo Rural y Medio Ambiente del Gobierno de Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Evaluation of 2D models for the prediction of surface depression storage using realistic reference values

  • Giménez Díaz, Rafael
  • Mezkiritz Barberena, Irantzu
  • Campo-Bescós, Miguel
  • Álvarez-Mozos, Jesús
  • González de Audícana Amenábar, María
  • Martínez de Aguirre Escobar, Alejandro
  • Casalí Sarasíbar, Javier
Depression storage (DS) is the maximum storage of precipitation and runoff in the soil surface at a given slope. The DS is determined by soil roughness that in agricultural soils is largely affected by tillage. The direct measurement of DS is not straightforward because of the natural permeability of the soil. Therefore, DS has generally been estimated from 2D/3D empirical relationships and numerical algorithms based on roughness indexes and height measurements of the soil surface, respectively. The objective of this work was to evaluate the performance of some 2D models for DS, using direct and reliable measurements of DS in an agricultural soil as reference values. The study was carried out in experimental microplots where DS was measured in six situations resulting from the combination of three types of tillage carried out parallel and perpendicular to the main slope. Those data were used as reference to evaluate four empirical models and a numerical method. Longitudinal altitudinal profiles of the relief were obtained by a laser profilometer. Infiltration measurements were carried out before and after tillage. The DS was largely affected by tillage and its direction. Highest values of DS are found on rougher surfaces mainly when macroforms cut off the dominant slope. The empirical models had a limited performance while the numerical method was the most effective, even so, with an important variability. In addition, a correct hydrological management should take into account that each type of soil tillage affects infiltration rate differently., This study was partly funded by the Spanish Government’s National Scientific Research, Development and Technological Innovation Plan, project code CGL2011-24336.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

On the assimilation set-up of ASCAT soil moisture data for improving streamflow catchment simulation

  • Loizu Maeztu, Javier
  • Massari, Christian
  • Álvarez-Mozos, Jesús
  • Tarpanelli, Angelica
  • Brocca, Luca
  • Casalí Sarasíbar, Javier
Assimilation of remotely sensed surface soil moisture (SSM) data into hydrological catchment models has been identified as a means to improve stream flow simulations, but reported results vary markedly depending on the particular model, catchment and assimilation procedure used. In this study, the in fluence of key aspects, such as the type of model, re-scaling technique and SSM observation error considered, were evaluated. For this aim, Advanced SCATterometer ASCAT-SSM observations were assimilated through the ensemble Kalman filter into two hydrological models of different complexity namely MISDc and TOPLATS) run on two Mediterranean catchments of similar size (750 km2). Three different re-scaling techniques were evaluated (linear re-scaling, variance matching and cumulative distribution function matching), and SSM observation error values ranging from 0.01% to 20% were considered. Four different efficiency measures were used for evaluating the results. Increases in Nash-Sutcliffe efficiency (0.03–0.15) and efficiency indices (10–45%) were obtained, especially when linear re-scaling and observation errors within 4-6% were considered. This study found out that there is a potential to improve stream flow prediction through data assimilation of remotely sensed SSM in catchments of different characteristics and with hydrological models of different conceptualizations schemes, but for that, a careful evaluation of the observation error and re-scaling technique set-up utilized is required., This study was partially funded by the Spanish Ministry of Science and Innovation (Project CGL2011-24336), the Spanish Ministry of Innovation and Competitiveness (Project CGL2015-64284-C2-1-R MINECO/FEDER) and by the Public University of Navarre through a pre-doctorate research scholarship to the first author.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Evaluation of TOPLATS on three Mediterranean catchments

  • Loizu Maeztu, Javier
  • Álvarez-Mozos, Jesús
  • Casalí Sarasíbar, Javier
  • Goñi Garatea, Mikel
Physically based hydrological models are complex tools that provide a complete description of the different processes occurring on a catchment. The TOPMODEL-based Land-Atmosphere Transfer Scheme (TOPLATS) simulates water and energy balances at different time steps, in both lumped and distributed modes. In order to gain insight on the behavior of TOPLATS and its applicability in different conditions a detailed evaluation needs to be carried out. This study aimed to develop a complete evaluation of TOPLATS including: 1) a detailed review of previous research works using this model; 2) a sensitivity analysis (SA) of the model with two contrasted methods (Morris and Sobol) of different complexity; 3) a 4-step calibration strategy based on a multi-start Powell optimization algorithm; and 4) an analysis of the influence of simulation time step (hourly vs. daily). The model was applied on three catchments of varying size (La Tejeria, Cidacos and Arga), located in Navarre (Northern Spain), and characterized by different levels of Mediterranean climate influence. Both Morris and Sobol methods showed very similar results that identified Brooks-Corey Pore Size distribution Index (B), Bubbling pressure (ψc) and Hydraulic conductivity decay (f) as the three overall most influential parameters in TOPLATS. After calibration and validation, adequate streamflow simulations were obtained in the two wettest catchments, but the driest (Cidacos) gave poor results in validation, due to the large climatic variability between calibration and validation periods. To overcome this issue, an alternative random and discontinuous method of cal/val period selection was implemented, improving model results., This study was partially funded by the Spanish Ministry of Science and Innovation (project CGL2011-24336) and by the Public University of Navarre through a pre-doctorate research scholarships to the first author.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Evaluation of terrestrial laser scanner and structure from motion photogrammetry techniques for quantifying soil surface roughness parameters over agricultural soils

  • Martínez de Aguirre Escobar, Alejandro
  • Álvarez-Mozos, Jesús
  • Milenković, Milutin
  • Pfeifer, Norbert
  • Giménez Díaz, Rafael
The surface roughness of agricultural soils is mainly related to the type of tillage performed, typically consisting of oriented and random components. Traditionally, soil surface roughness (SSR) characterization has been difficult due to its high spatial variability and the sensitivity of roughness parameters to the characteristics of the instruments, including its measurement scale. Recent advances in surveying have greatly improved the spatial resolution, extent, and availability of surface elevation datasets. However, it is still unknown how new roughness measurements relates with the conventional roughness measurements such as 2D profiles acquired by laser profilometers. The objective of this study was to evaluate the suitability of Terrestrial Laser Scanner (TLS) and Structure from Motion (SfM) photogrammetry techniques for quantifying SSR over different agricultural soils. With this aim, an experiment was carried out in three plots (5 × 5 m) representing different roughness conditions, where TLS and SfM photogrammetry measurements were co‐registered with 2D profiles obtained using a laser profilometer. Differences between new and conventional roughness measurement techniques were evaluated visually and quantitatively using regression analysis and comparing the values of six different roughness parameters. TLS and SfM photogrammetry measurements were further compared by evaluating multi‐directional roughness parameters and analyzing corresponding Digital Elevation Models. The results obtained demonstrate the ability of both TLS and SfM photogrammetry techniques to measure 3D SSR over agricultural soils. However, profiles obtained with both techniques (especially SfM photogrammetry) showed a loss of high‐frequency elevation information that affected the values of some parameters (e.g. initial slope of the autocorrelation function, peak frequency and tortuosity). Nevertheless, both TLS and SfM photogrammetry provide a massive amount of 3D information that enables a detailed analysis of surface roughness, which is relevant for multiple applications, such as those focused in hydrological and soil erosion processes and microwave scattering., This work was supported in part by the Spanish Ministry of Economy and Competitiveness under Grant BES‐2012‐054521, Project CGL2011‐24336, Project CGL2015‐64284‐C2‐1‐R, and Project CGL2016‐75217‐R (MINECO/FEDER, EU).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Assessing soil properties controlling interrill erosion: an empirical approach under Mediterranean conditions

  • Ollobarren del Barrio, Paul
  • Giménez Díaz, Rafael
  • Campo-Bescós, Miguel
Soil erodibility is a complex phenomenon that comprises a number of different soil properties. However, most current (empirical) erodibility indices are based on only a few soil properties. A feasible soil characterization of interrill erosion (IE) prediction at large scale should be based on simple, quick and inexpensive tests to perform. The objective of this work was to identify and assess those soil properties that best reflect soil vulnerability to IE. Twenty‐three agricultural soil samples located in Spain and Italy were studied. Forty‐nine different physical and chemical soil properties that presumably underpin IE were defined. Experiments were carried out in the field (in microplots using simulated rainfall) and in the lab. The most relevant variables were detected using multivariate analysis. Six key variables were finally identified: RUSLE K factor, a granulometric/organic matter content index, exchangeable sodium percentage, shear strength, penetration resistance and permeability of soil seal. The latter is proposed as a useful technique to evaluate soil susceptibility to crusting even when the crust is not present at the time of the field survey. The selected variables represented a wide range of soil properties, and they could also be successfully applied to different soils with different characteristics than those evaluated in our experiments., This study was partly financed by the Spanish Government’s National Plan for Research, Development and Technological Innovation [projects CGL2011-24336 (MICIN/FEDER) and CGL2015-64284-C2-1-R (MINECO/FEDER)]. The authors thank the Public University of Navarre (UPNA) for funding this work with a grant awarded to the principal author.