Pasar al contenido principal

TRATAMIENTO DE SUELOS CONTAMINADOS POR METALES MEDIANTE COMBINACION DE TECNICAS DE FITORREMEDIACION CON ADICION DE BIOCHAR

CGL2014-58322-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2014
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario UNIVERSIDAD POLITECNICA DE MADRID
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

Docta Complutense
Publicación Artículo científico (JournalArticle)

Cutting Parameter Selection for Efficient and Sustainable Repair of Holes Made in Hybrid Mg–Ti–Mg Component Stacks by Dry Drilling Operations

  • Rubio, Eva
  • Villeta López, María Del Carmen
  • Valencia Delfa, José
  • Sáenz de Pipaón, José
Drilling is one of the most common machining operations in the aeronautic and aerospace industries. For assembling parts, a large number of holes are usually drilled into the parts so that they can be joined later by rivets. As these holes are subjected to fatigue cycles, they have to be checked regularly for maintenance or repair, since small cracks or damage in its contour can quickly cause breakage of the part, which can have dangerous consequences. This paper focuses on finding the best combinations of cutting parameters to perform repair and maintenance operations of holes in stacked hybrid magnesium–titanium–magnesium components in an efficient, timely, and sustainable (without lubricants or coolants) manner, under dry drilling conditions. For the machining trials, experiments were designed and completed. A product of a full factorial 23 and a block of two factors (3 × 2) was used with surface roughness as the response variable measured as the mean roughness average. Analysis of variance (ANOVA) was used to examine the results. A set of optimized tool and cutting conditions is presented for performing dry drilling repair operations.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Improving Mining Soil Phytoremediation with Sinapis alba by Addition of Hydrochars and Biochar from Manure Wastes

  • Cárdenas-Aguiar, E.
  • Ruiz Bobes, Begoña
  • Fuente Alonso, Enrique
  • Gascó, Gabriel
  • Méndez, A.
The use of phytoremediation to remove metals of contaminated soils is an interesting technique that is usually limited by adverse physical and chemical properties of this type of soils. The addition of biochar produced from manure waste could improve soil properties due to its nutrient content, high cation exchange capacity or water holding capacity. However, the high water content of manure wastes precludes its pyrolysis treatment use for biochar production, without a previous drying step. Indeed, hydrothermal carbonization (HTC) of manure wastes could be an adequate treatment method as it takes place in water solution. The product obtained after HTC of biomass, named hydrochar, exhibits different physiochemical properties than biochar that could affect their potential application. The objective of the present work is to study the effect of chars obtained by pyrolysis or HTC of manure wastes in mining soil phytoremediation with Sinapis alba. Two selected mining soils (PORT and GAM) were treated with two manure biochars prepared at 450 °C (BMW450) and 600 °C (BMW600), two hydrochars prepared by HTC of manure at 190 °C (HWM190) and 240 °C (HMW240) and raw manure waste (MW) at a rate of 10% in mass. Later, different soil samples were incubated with or without Sinapis alba growth. Experimental results shown that properties of chars have a great influence on the efficiency of the use of Sinapis alba in the phytoremediation of mining soils. The addition of BMW600 and raw material (MW) increased the production of aerial and root biomass for GAM soil. For PORT soil, HMW190, two biochars and MW increases root and aerial biomass whereas HMW240 only produces an increment on aerial biomass. Addition of two hydrochars and MW had a positive effect on the biochemical soil activities and the highest microbial biomass carbon of GAM and PORT soil samples was observed after addition of HMW190. Finally, the addition of biochars and hydrochars could improve the phytoremediation of mining soils by Sinapis alba. However, the heavy metal uptake greatly depends on the type of soil, the amendment and the target metal. The accumulation of As, Pb and Zn in the aerial part of Sinapis alba was very low. However, Sinapis alba acts as accumulator for As in the presence of BMW600 and HMW190, for Zn after amendment with HM190 and for Pb after BMW600 addition to PORT soil. For GAM soil, only the addition of BMW450 and BM600 improves the capacity of accumulation of As in roots., Authors want to thank to Spanish Ministerio de Economía y Competitividad “Retos Investigación 2014” for the economic support (CGL2014-58322-R)., Peer reviewed
Docta Complutense
Publicación Artículo científico (JournalArticle)

Experimental Study for Improving the Repair of Magnesium–Aluminium Hybrid Parts by Turning Processes

  • Rubio, Eva
  • Villeta López, María Del Carmen
  • Valencia Delfa, José Luis
  • Sáenz de Pipaón, José
One of the lightest metallic materials used in the aeronautics, aerospace, and automotive industries, among others, is magnesium, due to its excellent weight/strength ratio. Most parts used in these industries need to be made of materials that are rigid, strong, and lightweight, but sometimes the materials do not simultaneously satisfy all of the properties required. An alternative is to combine two or more materials, giving rise to a hybrid component that can satisfy a wider range of properties. The pieces machined in these industrial fields must satisfy stringent surface roughness requirements that conform to the design specifications. This work shows an experimental study to analyse the surface roughness reached in hybrid components made up of a base of magnesium alloy (UNS M11917) and two inserts of aluminium alloy (UNS A92024) obtained by turning. Its purpose is to determine the influence of the factors and their possible interactions on the response variable, the surface roughness Ra. The study is carried out using a design of experiments (DOE). A product of a full factorial 23 and a block of two factors 3 × 2 was selected. The factors identified as possible sources of variation of the surface roughness are: depth of cut, feed rate, spindle speed, type of tool, location with respect to the specimen (LRS), and location with respect to the insert (LRI). Data were analysed by means of the analysis of variance (ANOVA) method. The main conclusion is the possibility to carry out the repair and maintenance of parts of magnesium–aluminum hybrid components by dry turning; that is, without cutting fluids and, therefore, in the most sustainable way that the process can be carried out. In addition, different combinations of cutting parameters have been identified that allow these operations to be carried out in an efficient manner, reducing mechanization times and, therefore, also the direct and indirect costs associated with them.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Spatial Modeling of Rainfall Patterns over the Ebro River Basin Using Multifractality and Non-Parametric Statistical Techniques

  • Valencia Delfa, José Luis
  • Tarquis, Ana
  • Saa, Antonio
  • Villeta López, María Del Carmen
  • Gascó, José
Rainfall, one of the most important climate variables, is commonly studied due to its great heterogeneity, which occasionally causes negative economic, social, and environmental consequences. Modeling the spatial distributions of rainfall patterns over watersheds has become a major challenge for water resources management. Multifractal analysis can be used to reproduce the scale invariance and intermittency of rainfall processes. To identify which factors are the most influential on the variability of multifractal parameters and, consequently, on the spatial distribution of rainfall patterns for different time scales in this study, universal multifractal (UM) analysis—C1, α, and γs UM parameters—was combined with non-parametric statistical techniques that allow spatial-temporal comparisons of distributions by gradients. The proposed combined approach was applied to a daily rainfall dataset of 132 time-series from 1931 to 2009, homogeneously spatially-distributed across a 25 km × 25 km grid covering the Ebro River Basin. A homogeneous increase in C1 over the watershed and a decrease in α mainly in the western regions, were detected, suggesting an increase in the frequency of dry periods at different scales and an increase in the occurrence of rainfall process variability over the last decades.