Pasar al contenido principal

ANALISIS DE LOS PROCESOS DE ACUMULACION, EROSION Y TRANSPORTE DE SEDIMENTOS COHESIVOS EN SISTEMAS DE SANEAMIENTO UNITARIO

CGL2015-69094-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2015
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Dirección General de Investigación Científica y Técnica
Centro beneficiario UNIVERSIDADE DA CORUÑA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Sedunit project: Study of the accumulation, erosion and sediment transport of cohesive solids in combined sewer systems

  • Anta, Jose
  • Suárez-López, Joaquín
  • Jácome-Burgos, Juan-Alfredo
  • Regueiro-Picallo, Manuel
  • Puertas, Jerónimo
  • Naves, Juan
  • Recarey, Montserrat
[Abstract:] The SEDUNIT Project is a Spanish National Research focused on the study of the sediment transport in combined sewer systems. The main objective of this study is to advance in the understanding of the sediment accumulation and erosion processes in combined sewer systems and the optimization of the operation and maintenance practices in sewer networks. The research is divided into three tasks corresponding to different scales in order to approach the objectives of the Project: laboratory tests, field work and numerical modelling. A flume test facility is utilized for the laboratory scale. In this facility, a series of experiments are performed in order to study the accumulation and erosion processes. For the second task, a real combined sewer is being monitored in order to validate laboratory results. The sediment properties and the volume of the accumulated solids in the sewer are the main analysed parameters. The last task consists in a review of the existing sediment transport models and their applicability to assess how parameters such as the cohesion of solids affect the resuspension processes and how they should be included in the existing models., The SEDUNIT Project was supported by the MINECO and FEDER funding (Ref. CGL2015- 69094-R). The construction of the flume test facility and part of the assistance in the experimental campaign was funded by the Projects OvalPipe I (Ref. ITC-20133052) and OvalPipe II (Ref. RTC-2016-4987-5) powered by the company ABN Pipe Systems S.L.U. and with the support of EMALCSA and EDAR Bens S.A. (MINECO/FEDER, EU). The research work of Mr. Juan Naves was financed by the Spanish Government grant (FPU14/01778).
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Characterisation of sediments during transport of solids in circular sewer pipes

  • Regueiro-Picallo, Manuel
  • Anta, Jose
  • Suárez-López, Joaquín
  • Puertas, Jerónimo
  • Jácome-Burgos, Juan-Alfredo
  • Naves, Juan
[Abstract:] This research is focused in the monitoring of sediments in circular sewer pipes with different diameters at a flume facility fed with urban wastewater. For this purpose, sediment physical and chemical characteristics, and sediment mobility were recorded. The Structure from Motion photogrammetric technique was used for the measurement of sediment bed evolution. In addition, sediment properties were determined in order to study the cohesiveness of the bed deposits. In particular, the chemical oxygen demand and the oxygen uptake rate of the sediment samples were analysed after different accumulation periods on the pipe inverts, resulting in a relation between these parameters and the mobility processes of solids., This research was funded by the projects ‘SEDUNIT’ Ref. CGL2015-69094-R and ‘OVALPIPE II’ Ref. RTC-2016-4987-5 (MINECO/FEDER, EU). The authors would like to thank Ms Montse Recarey and the companies EDAR Bens SA, EMALCSA and ABN Pipe Systems S.L.U. for their assistance with the experimental work. The research work of Mr Juan Naves was financed by the Spanish Government grant (FPU14/01778).
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Using a 2D Shallow Water Model to Assess Large-Scale Particle Image Velocimetry (Lspiv) and Structure From Motion (Sfm) Techniques in a Street-Scale Urban Drainage Physical Model

  • Naves, Juan
  • Anta, Jose
  • Puertas, Jerónimo
  • Regueiro-Picallo, Manuel
  • Suárez-López, Joaquín
Versión aceptada de https://doi.org/10.1016/j.jhydrol.2019.05.003, [Abstract:] Physically-based numerical modelling of surface processes in urban drainage, such as pollutant wash-off or the assessment of flood risks, requires appropriate calibration and terrain elevation data to properly simulate the overland flows and thus to achieve useful results. Accordingly, this study aims to obtain an accurate representation of the runoff generated by three different rain intensities, 30, 50 and 80 mm/h, in a full-scale urban drainage physical model of 36 m2. The study focuses firstly on applying the Structure from Motion (SfM) photogrammetric technique to carry out a high-resolution and accurate topographic survey. This topography was implemented in a 2D shallow water model and the results were compared with those obtained using traditional data point measured topography. Negligible differences were found when comparing the two models with measured discharges at the physical model gully pots. However, significant differences were obtained in the velocity distributions, especially in the shallowest flow areas where drainage channels of a few millimeters’ depth appeared in the high resolution topographic survey. Results from the numerical model were compared with overland flow velocities, determined by applying a modified Large Scale Particle Image Velocimetry (LSPIV) methodology using fluorescent particles. With the SfM topography, the 2D model was able to obtain a better representation of the experimental data, since small scale irregularities of the pavement surface could be represented in the model domain. At the same time, LSPIV was presented as a very suitable tool for the accurate measurement of runoff velocities in urban drainage models, avoiding the interference of raindrop features in the recorded images and with overland water depths in the order of few millimeters., This work was partially supported by the Spanish Ministry of Science, Innovation and Universities [grants number RTI2018-094217-B-C33, UNLC15-DE-2862 and CGL2015-69094-R MINECO/FEDER, UE]. The first author was in receipt of a Spanish Ministry of Science, Innovation and Universities predoctoral grant [FPU14/01778]. The authors would also like to acknowledge the support of Esteban Sañudo in the development of experiments, and the fruitful discussions with Luis Cea, Beatriz Náscher and Paco Vallés.
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

New insights to study the accumulation and erosion processes of fine-grained organic sediments in combined sewer systems from a laboratory scale model

  • Regueiro-Picallo, Manuel
  • Suárez-López, Joaquín
  • Sañudo, Esteban
  • Puertas, Jerónimo
  • Anta, Jose
Versión aceptada de https://doi.org/10.1016/j.scitotenv.2020.136923, [Abstract:] The deposition and resuspension of sediments are issues of considerable concern in combined sewer systems management. Sediments can produce the loss of hydraulic capacity and odour generation in sewers, and are also considered the main source of pollution due to their occasional uncontrolled discharges into the environment via Combined Sewer Overflows (CSO). Sewer sediments contain granular and cohesive organic fractions that can have a significant influence on bed resistance. In order to address the relationship between sewer sediment composition and its erodibility, accumulation and erosion experiments were performed in a flume test facility fed with wastewater. The flume was placed in a Wastewater Treatment Plant (WWTP), in which different circular pipe geometries were set. Wastewater flow inlet conditions and bed structures were monitored during the experiments. The photogrammetric technique Structure from Motion (SfM) was applied to record the bed deposit structures, providing accurate measurements of the accumulation rates. The SfM was also used to assess sediment transport and the characteristics of the bed forms after the erosion tests. In addition, velocity distributions and shear stress profiles were measured during the erosion tests to characterize flow resistance and sediment erosion. During both accumulation and erosion tests, sediments were sampled in order to analyse their physicochemical properties, thus highlighting the study of the biodegradability of the organic matter. Different deposition periods showed biological transformations in the bed deposit structure, which were seen to affect its cohesion, and in consequence, its erosion threshold. Tests with significant erosion rates agreed in broad terms with dimensionless sediment transport models derived from previous experimental studies performed with partly cohesive and organic materials in sewer pipes., This research was financed by the projects ‘SEDUNIT’ Ref. CGL2015-69094-R and ‘OVALPIPE II’ Ref. RTC-2016-4987-5 (MINECO/FEDER, EU). The authors would like to thank the companies EDAR Bens SA, EMALCSA and ABN Pipe Systems S.L.U. for their assistance with the experimental work.