Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Análisis integral del lavado y arrastre de sólidos en suspensión en cuencas urbanas utilizando un simulador de lluvia a escala real, Comprehensive analysis of sediment wash-off and suspended solids transport in urban catchments using a full-scale rainfall simulator

  • Naves, Juan
  • Puertas, Jerónimo
  • Suárez, Joaquín
  • Anta, Jose
[EN] Due the lack of accurate experimental data to develop and validate surface urban wash-off and sediment transport models, this study presents an extensive experimental campaign in which the variables involved in wash-off and sediment transport processes are precisely measured in a 1:1 scale urban drainage physical model of 36 m2. In these experiments, different sediment granulometries and rain intensities were tested measuring surface and in-pipe water depths; surface velocities using imaging techniques; flow discharges, total suspended solids concentrations and particle size distributions at the entrance of the gully pots and at the pipe system outlet; and performing mass balances with the sediment that remains deposited at the end of the experiments in the different parts of the model. Raw and processed data obtained is openly available in Zenodo repository (https://zenodo.org/communities/washtreet)., [ES] Ante la falta de datos experimentales precisos para el desarrollo y validación de modelos de lavado y transporte de sedimentos en la superficie de cuencas urbanas, en este estudio se presenta una serie de ensayos en los que los procesos involucrados son medidos con detalle en un modelo físico de drenaje urbano dual de 36 m2 a escala real. Durante los experimentos, se han analizado tres intensidades de lluvia y cinco clases de sedimento y se han medido calados y velocidades en superficie; calados en colectores; caudales, concentraciones de SST y distribuciones de tamaños de partícula en el flujo de entrada a las arquetas y en el punto de vertido de la red de colectores; y se han realizado balances de masas a partir del sedimento que queda depositado en las distintas partes del modelo. Todos los datos brutos y procesados obtenidos se encuentran disponibles en el repositorio de acceso abierto Zenodo (https://zenodo.org/communities/washtreet)., El primer autor ha sido financiado por la beca de doctorado FPU14/01778. Este trabajo ha sido financiado parcialmente a través de los proyectos RTI2018-094217-B-C33 (MINECO/FEDER-UE), UNLC15-DE-2862 (MINECO/FEDER-UE y ED431C 2018/56 (Xunta de Galicia).
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Análisis integral del lavado y arrastre de sólidos en suspensión en cuencas urbanas utilizando un simulador de lluvia a escala real, Comprehensive analysis of sediment wash-off and suspended solids transport in urban catchments using a full-scale rainfall simulator

  • Naves, Juan
  • Puertas, Jerónimo
  • Suárez-López, Joaquín
  • Anta, Jose
[Resumen:] Ante la falta de datos experimentales precisos para el desarrollo y validación de modelos de lavado y transporte de sedimentos en la superficie de cuencas urbanas, en este estudio se presenta una serie de ensayos en los que los procesos involucrados son medidos con detalle en un modelo físico de drenaje urbano dual de 36 m2 a escala real. Durante los experimentos, se han analizado tres intensidades de lluvia y cinco clases de sedimento y se han medido calados y velocidades en superficie mediante técnicas de visualización; calados en colectores; caudales, concentraciones de SST y distribuciones de tamaños de partícula en el flujo de entrada a las arquetas y en el punto de vertido de la red de colectores; y se han realizado balances de masas a partir del sedimento que queda depositado en las distintas partes del modelo. Todos los datos brutos y procesados obtenidos se encuentran disponibles en el repositorio de acceso abierto Zenodo (https://zenodo.org/communities/washtreet)., [Abstract:] Due to the lack of accurate experimental data to develop and validate surface urban wash-off and sediment transport models, this study presents an extensive experimental campaign in which the variables involved in wash-off and sediment transport processes are precisely measured in a 1:1 scale urban drainage physical model of 36 m2. In these experiments, different sediment granulometries and rain intensities were tested measuring surface and in-pipe water depths; surface velocities using imaging techniques; flow discharges, total suspended solids concentrations and particle size distributions at the entrance of the gully pots and at the pipe system outlet; and performing mass balances collecting the sediment that remains deposited at the end of the experiments in the different parts of the model. Raw and processed data obtained is openly available in Zenodo repository (https://zenodo.org/communities/washtreet)., El primer autor ha sido financiado por la beca de doctorado FPU14/01778. Este trabajo ha sido financiado parcialmente a través de los proyectos RTI2018-094217-B-C33 (MINECO/FEDER-UE), UNLC15-DE-2862 (MINECO/FEDER-UE y ED431C 2018/56 (Xunta de Galicia)., Xunta de Galicia; ED431C 2018/56
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Using a 2D Shallow Water Model to Assess Large-Scale Particle Image Velocimetry (Lspiv) and Structure From Motion (Sfm) Techniques in a Street-Scale Urban Drainage Physical Model

  • Naves, Juan
  • Anta, Jose
  • Puertas, Jerónimo
  • Regueiro-Picallo, Manuel
  • Suárez-López, Joaquín
Versión aceptada de https://doi.org/10.1016/j.jhydrol.2019.05.003, [Abstract:] Physically-based numerical modelling of surface processes in urban drainage, such as pollutant wash-off or the assessment of flood risks, requires appropriate calibration and terrain elevation data to properly simulate the overland flows and thus to achieve useful results. Accordingly, this study aims to obtain an accurate representation of the runoff generated by three different rain intensities, 30, 50 and 80 mm/h, in a full-scale urban drainage physical model of 36 m2. The study focuses firstly on applying the Structure from Motion (SfM) photogrammetric technique to carry out a high-resolution and accurate topographic survey. This topography was implemented in a 2D shallow water model and the results were compared with those obtained using traditional data point measured topography. Negligible differences were found when comparing the two models with measured discharges at the physical model gully pots. However, significant differences were obtained in the velocity distributions, especially in the shallowest flow areas where drainage channels of a few millimeters’ depth appeared in the high resolution topographic survey. Results from the numerical model were compared with overland flow velocities, determined by applying a modified Large Scale Particle Image Velocimetry (LSPIV) methodology using fluorescent particles. With the SfM topography, the 2D model was able to obtain a better representation of the experimental data, since small scale irregularities of the pavement surface could be represented in the model domain. At the same time, LSPIV was presented as a very suitable tool for the accurate measurement of runoff velocities in urban drainage models, avoiding the interference of raindrop features in the recorded images and with overland water depths in the order of few millimeters., This work was partially supported by the Spanish Ministry of Science, Innovation and Universities [grants number RTI2018-094217-B-C33, UNLC15-DE-2862 and CGL2015-69094-R MINECO/FEDER, UE]. The first author was in receipt of a Spanish Ministry of Science, Innovation and Universities predoctoral grant [FPU14/01778]. The authors would also like to acknowledge the support of Esteban Sañudo in the development of experiments, and the fruitful discussions with Luis Cea, Beatriz Náscher and Paco Vallés.