Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Risk-targeted hazard maps for Spain

  • Kharazian, Alireza
  • Molina-Palacios, Sergio
  • Galiana-Merino, Juan José
  • Agea-Medina, Noelia
  • Galiana-Merino, Juan José|||/items/2aeffb6f-7a89-465b-a756-a9ca8b74bb42
  • Molina-Palacios, Sergio|||/items/3840fc9f-5100-466f-8908-a5ae04cf798d
Many studies have demonstrated that the design of structures in a region through the uniform hazard principle does not guarantee a uniform collapse risk. Even in regions with similar Peak Ground Accelerations (PGAs) corresponding to the same mean return period, the seismic risk in terms of collapse probability will be significantly different mainly due to the shape of the hazard curves as well as uncertainties in structural capacities. In this paper, risk-targeted hazard mapping is being explored in peninsular Spain using a recently updated seismic hazard map. Since risk targeting involves multiple input parameters such as the model parameters of fragility curves, their variability was considered through their probability distribution as observed in reinforced concrete (RC) moment frame buildings, representing the most common building typology in Spain. The influence of the variation of these parameters on the risk results were investigated, and different assumptions for estimating the model parameters of fragility curves are illustrated. These assumptions were included in a fixed (generic) fragility curve or building-site-specific fragility curves. Different acceptable damage states (i.e., collapse and yielding) were considered concerning Spain’s seismicity level. Finally, the maps for risk-targeted design ground motions and risk coefficients are presented. It is outlined that the employment of risk-targeted analysis leads to the modifications for existing design ground motions due to the different shape of the hazard curves across Spain and considering the uncertainty of structural capacity. Moreover, it is found that using the building- and site-specific fragility curves could result in a more uniform seismic risk across the country.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

A Next-Generation Open-Source Tool for Earthquake Loss Estimation

  • Molina-Palacios, Sergio
  • Lang, Dominik H.
  • Meslem, Abdelghani
  • Lindholm, Conrad D.
  • Agea-Medina, Noelia
  • Molina-Palacios, Sergio|||/items/3840fc9f-5100-466f-8908-a5ae04cf798d
Earthquake loss estimation (ELE), generally also referred to as earthquake risk assessment, is a comparably young research discipline which, at first, relied on empirical observations based on a macroseismic intensity scale. Later, with the advent of methodologies and procedures that are based on theoretical simulation in estimating physical damage under earthquake loading, the analytical approach for ELE was formulated. The open-source software SELENA, which is a joint development of NORSAR (Norway) and the University of Alicante (Spain), is undergoing a constant development. One of the more recent features being included is the possibility to address topographic amplification of seismic ground motion. Additionally, SELENA has been adapted by including various methods for the analytical computation of structural damage and loss. SELENA now offers complete flexibility in the use of different types of fragility curves based on various ground motion intensity parameters (e.g. PGA, Sa, Sd), which has been suggested by many recently released guidelines (e.g. FEMA P-58, GEM-ASV, SYNER-G, HAZUS- MH). Besides, under the framework of the ongoing Horizon 2020 LIQUEFACT project, SELENA is extended in order to allow the consideration of liquefaction-induced ground displacements and respective structural damage. In general, software tools for ELE are particularly useful in two different settings, i.e., for disaster management and (re)insurance purposes. Both sectors pose very different demands on ELE studies: while the (re)insurance sector is foremost interested in the direct and indirect economic losses caused by an earthquake to its insured physical assets, those institutions (often governmental and non- governmental organizations) in charge of disaster emergency management and response are more interested in reliable estimates on human losses and the potential short- and long-term social consequences. Being aware about these peculiar differences between software tools for disaster management and insurance applications, NORSAR/UA thereby offers two in its core similar software tools, i.e., the open-source software SELENA and the proprietary software PML (Probable Maximum Loss) which is actively used by the insurance association in Chile (South America) since 2011.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Analysis of Radon Measurements in Relation to Daily Seismic Activity Rates in the Vrancea Region, Romania

  • Galiana-Merino, Juan José
  • Molina-Palacios, Sergio
  • Kharazian, Alireza
  • Toader, Victorin-Emilian
  • Moldovan, Iren-Adelina
  • Gómez, Igor
  • Galiana-Merino, Juan José|||/items/2aeffb6f-7a89-465b-a756-a9ca8b74bb42
  • Gómez, Igor|||/items/0a4def63-1644-41da-a031-5d47de253f7f
  • Molina-Palacios, Sergio|||/items/3840fc9f-5100-466f-8908-a5ae04cf798d
Many previous research studies have shown how local and even regional earthquakes can significantly affect the release of radon in the soil. The aim of this work is to investigate the relationship between radon measurements and the daily seismic activity rate and develop a methodology that allows estimating the seismic activity rate using only radon measurements. To carry out this study, the earthquake catalogue of the Vrancea region (Romania) has been used to estimate the daily seismic activity rate during a given time period, in which radon measurements were also recorded, from January 2016 to September 2020. The Vrancea zone represents the most active seismic zone in Europe and is located on the eastern edge of the strongly bent Carpathian arc. In the case of the radon measurements, seasonal behaviours and linear trends due to non-seismic factors have been identified and subsequently removed. The discrete wavelet transform has been used to analyse the radon signal at two different scales: long and short periods. From the analysis carried out on a long-period scale, an approximate linear relationship has been obtained between the radon series and the daily seismic activity rate, which provides insights into the behaviour of the seismic activity in the study region with only the radon information. In addition, the study reveals certain characteristics that could be used as precursors of earthquakes at different scales: weeks in the case of the estimated daily seismic activity rate, and days in the case of the short-period signal obtained by the wavelet analysis. The results obtained for this region allow us to hope that the analysis of the radon time series can become an effective complement to the conventional seismic analysis used in operational earthquake forecasting.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Seismic emergency planning in the municipalities of Elche and Alicante, Spain: first step for disaster management

  • Huesca Tortosa, José Antonio
  • Agea-Medina, Noelia
  • Molina-Palacios, Sergio
  • Galiana-Merino, Juan José
  • Rosa-Herranz, Julio
  • Soler Llorens, Juan Luis
  • Galiana-Merino, Juan José|||/items/2aeffb6f-7a89-465b-a756-a9ca8b74bb42
  • Huesca Tortosa, José Antonio|||/items/220bbf08-3e9e-4bc9-a2f4-caba10df730b
  • Molina-Palacios, Sergio|||/items/3840fc9f-5100-466f-8908-a5ae04cf798d
The south and south-east of Spain are the regions with a higher seismic hazard in Spain. However, although a regional normative focused on the importance of developing seismic emergency planning in many of the municipalities of the Valencian Community was established in 2011, only Elche and Alicante have started to compute the seismic risk and it is planned that their emergency plans will be finished before the end of 2019. The seismic hazard update in the region has shown that the main earthquake scenarios, which will hit both cities, correspond to the Crevillente and the Bajo Segura faults (also responsible of damaging historical earthquakes). The main goal of the developed emergency planning (PAM) is to provide a fast, effective and coordinate response from the public and private stakeholders when a damaging earthquake happen. Assuring, therefore, the maximum protection to the inhabitants and infrastructures in the urban area. The basic functions of the PAM are: a) To establish clearly the organizational and functional structure for intervention in emergencies due to earthquakes that affect the territory; b) To assure the coordination between the emergency agencies at the national, regional and urban level; c) To map a seismic risk zonation that can be used to plan the intervention and locate non-damage infrastructures to be used in the emergency; d) To Increase the population resilience through emergency procedure and education.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Sensitivity of structural damage to earthquake ground motion scenarios. The Torrevieja earthquake case study

  • Agea-Medina, Noelia
  • Molina-Palacios, Sergio
  • Lang, Dominik H.
  • Ferreiro Prieto, Juan Ignacio
  • Huesca Tortosa, José Antonio
  • Galiana-Merino, Juan José
  • Soler Llorens, Juan Luis
  • Galiana-Merino, Juan José|||/items/2aeffb6f-7a89-465b-a756-a9ca8b74bb42
  • Huesca Tortosa, José Antonio|||/items/220bbf08-3e9e-4bc9-a2f4-caba10df730b
  • Molina-Palacios, Sergio|||/items/3840fc9f-5100-466f-8908-a5ae04cf798d
Structural damage computation using analytical methods requires the knowledge of the ground motion distribution in the urban area caused by a given earthquake. In this manuscript, the ground motion estimates (i.e. PGA and spectral acceleration values) are obtained through simulation of the 1829 Torrevieja earthquake using the NGA ground motion prediction equations (GMPE). The building stock under consideration has been classified according to the methodology presented in RISK-UE. The computations have been done using the last version of the software SELENA. The epistemic uncertainties of the analysis are accounted for by means of a logic tree computation scheme. The logic tree has two branches for the uncertainty in the earthquake scenario, two branches for the GMPEs and three branches to consider the uncertainties in average shear wave velocity Vs30 (soil conditions). Results indicate large differences derived for the different earthquake loss scenarios (ELE) obtained following each branch of the logic tree. The greatest structural damages and losses are obtained when the earthquake is located in the Bajo Segura fault zone, using Campbell and Bozorgnia GMPE and for soft soil conditions. This article has allowed us to see how the different possible input parameters for ELE should be carefully analyzed for each case study and the importance of providing ELE results in terms of mean values with corresponding uncertainty ranges.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Risk-targeted maps for Alicante province (Spain)

  • Kharazian, Alireza
  • Molina-Palacios, Sergio
  • Galiana-Merino, Juan José
  • Agea-Medina, Noelia
  • Galiana-Merino, Juan José|||/items/2aeffb6f-7a89-465b-a756-a9ca8b74bb42
  • Molina-Palacios, Sergio|||/items/3840fc9f-5100-466f-8908-a5ae04cf798d
The areas with higher seismic risks in Spain are located in the South and South-East of Spain. For instance, the recent seismic hazard analysis performed in the Alicante and Elche have obtained a PGA of 200 cm/sec2 approximately in the region and indicated that the highest contribution to the seismic hazard comes from the seismicity due to the Crevillente and the Bajo Segura faults. Many studies have demonstrated that the design of structures in the region through the use of “uniform hazard” principle, does not guarantee that the collapse risk in the region is uniform as well, i.e., even in those regions with similar PGAs corresponding to the same mean return period, the seismic risk in terms of failure probability will be significantly different. A new approach called “risk targeting” has already been adopted by new generations of seismic codes and associated research, where the parameters are specified to ensure a tool for the design of buildings with a probability of collapse alike or at least harmonized throughout the area concerned. Consequently, in this study, we will focus on the evaluation of the collapse probability of the buildings and then developing the risk-targeted maps of the Alicante. Finally, the preliminary obtained results will be discussed.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

A period-dependent topographic amplification model for earthquake loss estimation

  • Molina-Palacios, Sergio
  • Lang, Dominik H.
  • Singh, Yogendra
  • Meslem, Abdelghani
  • Molina-Palacios, Sergio|||/items/3840fc9f-5100-466f-8908-a5ae04cf798d
A review study is presented targeting the question how topographic amplification of strong earthquake ground motions is currently handled in literature and how this effect can be incorporated within earthquake loss estimation (ELE). An improved understanding of the phenomenon would also facilitate its inclusion in future building design code provisions in a more rigorous manner than present levels. Even though it is widely accepted that, in addition to soil conditions, surface topography can have considerable influence on the frequency and amplitude characteristics of earthquake ground motion, this effect has been neglected in all of the existing ELE software tools, and neither do ELE studies in general consider this effect. Therefore, after a detailed review of the existing literature, we have synthesized the results from some of the studies into a period-dependent topographic amplification relationship (including PGA) for sites at the top of a hill, which may be used in ELE studies. The relationship for an amplification factor, Ah, was obtained by fitting a database containing 333 data points, in which Ah ranges from 0.31 to 3.04, and the shape relief (H/L) ranges from 0.25 to 0.8. Out of these, seven data points correspond to topographic amplification of PGA while the remaining data points correspond to amplification of the spectral acceleration at periods ranging between 0.065 and 3.91 s. All the data stems from analytical/numerical studies and we have only considered the possibility of topographic amplification due to SV/SH waves with an incidence angle perpendicular to the base of the hill. The results show a reasonable correlation between the theoretical and the fitted data. We also have compared the amplification factors provided by our period-dependent relationships with the most recent experimental and numerical data for the Narni ridge (Italy) and found close similarities with these results. The proposed relationship can be used not only in ELE studies but also in simplified seismic microzonation studies.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Geophysical Study of a Large Landslide Affecting the Urban Area of Albuñuelas (S Spain)

  • Mita, Mara
  • Galiana-Merino, Juan José
  • Garrido Manrique, Jesús
  • Lenti, Luca
  • Martino, Salvatore
  • Pappadopoulo, Jacopo
  • Peláez Montilla, José Antonio
  • Benabdeloued, Boualem Youcef Nassim
  • Delgado, Jose
  • Benabdeloued, Boualem Youcef Nassim|||/items/ffb8f87e-01d7-4a88-8296-c3e750ca8c93
  • Delgado, Jose|||/items/23421faf-57a5-44ec-a169-eadbf91c5ae5
  • Galiana-Merino, Juan José|||/items/2aeffb6f-7a89-465b-a756-a9ca8b74bb42
The urban area of Albuñuelas, a small town located to the south of Granada (S Spain), has been developed in terrain affected by a large-scale rotational landslide with very slow rate of movement. Despite this situation, the internal structure of the landslide and how it has evolved to its present state has not been analyzed in depth up to now. In this paper, we present the first study performed on this landslide to define its configuration and characteristics. For this purpose, ambient noise single-station and array measurements were carried out along several cross-sections of the landslide. The inversion of the measurements has allowed for the estimation of the soil stratigraphy at each site of measurement. These geophysical results have been constrained by data from a borehole drilled in the zone and from field observations of the local geology, allowing for the reduction in uncertainties in the results. A geological–geophysical model of the landslide has been built from these data, showing that the landslide thicknesses is greater than 50 m in its central parts and above 60 m in the upper ones. This model reveals that the evolution of the landslide was complex, with several dislodged elements (blocks) that moved in sequence (retrogression) and were partially eroded in order to explain present morphology. The future evolution of this landslide will be controlled by the composition of the materials surveyed along the foot of the valley, being the western part where there are more erodible materials according to the obtained results.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Design and Implementation of a Wireless Sensor Network for Seismic Monitoring of Buildings

  • Jornet Monteverde, Julio Antonio
  • Galiana-Merino, Juan José
  • Soler Llorens, Juan Luis
  • Galiana-Merino, Juan José|||/items/2aeffb6f-7a89-465b-a756-a9ca8b74bb42
  • Jornet Monteverde, Julio Antonio|||/items/1e29090c-8b13-4ea4-9123-55619a881fdf
This article presents a new wireless seismic sensor network system, especially design for building monitoring. The designed prototype allows remote control, and remote and real-time monitoring of the recorded signals by any internet browser. The system is formed by several Nodes (based on the CC3200 microcontroller of Texas Instruments), which are in charge of digitizing the ambient vibrations registered by three-component seismic sensors and transmitting them to a central server. This server records all the received signals, but also allows their real-time visualization in several remote client browsers thanks to the JavaScript’s Node.js technology. The data transmission uses not only Wi-Fi technology, but also the existing network resources that nowadays can be found usually in any official or residential building (lowering deployment costs). A data synchronization scheme was also implemented to correct the time differences between the Nodes, but also the long-term drifts found in the internal clock of the microcontrollers (improving the quality of records). The completed system is a low-cost, open-hardware and open-software design. The prototype was tested in a real building, recording ambient vibrations in several floors and observing the differences due to the building structure.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Seismic damage scenarios in the municipalities of Elche and Alicante (Spain). A first step to the emergency planning

  • Molina-Palacios, Sergio
  • Agea-Medina, Noelia
  • Galiana-Merino, Juan José
  • Navarro Bernal, Manuel
  • Huesca Tortosa, José Antonio
  • García-Jerez, Antonio
  • Seivane, Helena
  • Soler Llorens, Juan Luis
  • Benabdeloued, Boualem Youcef Nassim
  • Benabdeloued, Boualem Youcef Nassim|||/items/ffb8f87e-01d7-4a88-8296-c3e750ca8c93
  • Galiana-Merino, Juan José|||/items/2aeffb6f-7a89-465b-a756-a9ca8b74bb42
  • Huesca Tortosa, José Antonio|||/items/220bbf08-3e9e-4bc9-a2f4-caba10df730b
  • Molina-Palacios, Sergio|||/items/3840fc9f-5100-466f-8908-a5ae04cf798d
South and South-East of Spain are the regions with a higher seismic hazard in Spain. Therefore, a regional normative, focused on the importance of developing seismic emergency planning in many of the municipalities of the Valencian community, was established in 2011. consequently, all the municipalities in Alicante province have to develop a seismic emergency planning. however, only Elche and Alicante have completed the seismic risk analysis and they have started to prepare their emergency plans which will be finished before the end of 2019. This paper shows the main results of the seismic risk analysis carried out in both municipalities. The seismic hazard update in the region has shown that the main earthquake scenarios, which may hit both cities, correspond to the crevillente and the Bajo Segura faults (also responsible for damaging historical earthquakes). In both cases, the urban areas are on a sedimentary deposit, which can reach hundreds of meters so site effects and possible site-building resonance can be important. Additionally, most of the building stock belongs to periods without seis- mic normative, increasing, therefore, their vulnerability and the obtained damage. The mean damage ratio for a magnitude of 5.5 increases from a 0.8% to a 10.3% at Alicante and Elche, respectively. Besides, if the magnitude increases to a 6.5 then the mean damage ratio increases from a 16.6% to a 60.3%. In conclusion, we recommend that the emergency planning developed for both municipalities has to take into consideration that even the occurrence of a probable earthquake (475 yrs return period) corresponding to a mw 5.5 will affect both cities so the procedures and protocols should be written in close cooperation.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

A new tool to simulate ground shaking and earthquake losses

  • Lopez Hidalgo, Fernando
  • Navarro Bernal, Manuel
  • Molina-Palacios, Sergio
  • Molina-Palacios, Sergio|||/items/3840fc9f-5100-466f-8908-a5ae04cf798d
The main purpose of this suite is Planning and Management of Seismic Emergencies before and after future damaging earthquake. This tool is written in ArcGIS software executing a fast and efficient determination of the estimated shakemaps and damage scenarios. The tool allows to select the earthquake source parameters through a defined database; moreover ground motion prediction equations can be chosen and they can be combined according to the study area features. The local site effects are characterized from Vs30 values, which have been achieved by topographic slope as a proxy (even with local correlations) obtained from digital elevation model. The elements exposed to risk are incorporated from the cadastral database after inputs has been refined through an automated analysis. Vulnerability and estimated losses can be determined either empirically (EMS-98 scale and Vulnerability Index, Iv) or analytically (Capacity spectrum). Additionally, a vulnerability modifier is implemented to account soil-structure resonance. Epistemic uncertainties are quantified in the input parameters using a logic tree. This tool has been validated through a representative seismic scenario: the 1910 Adra earthquake (southern Spain) with moment magnitude (Mw) 6.3 and macroseismic intensity VIII (EMS-98 scale) proving the reliability of this program.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Fundamental period relationship of RC-buildings in Alicante province (Spain). A first step to soil-structure resonance maps

  • Agea-Medina, Noelia
  • Kharazian, Alireza
  • Molina-Palacios, Sergio
  • Galiana-Merino, Juan José
  • Soler Llorens, Juan Luis
  • Galiana-Merino, Juan José|||/items/2aeffb6f-7a89-465b-a756-a9ca8b74bb42
  • Molina-Palacios, Sergio|||/items/3840fc9f-5100-466f-8908-a5ae04cf798d
South and South-East of Spain are the regions with a higher seismic hazard in Spain Consequently, all the municipalities in Alicante province has to develop seismic emergency planning. Besides, the south of Alicante province and, in particular, the cities of Elche and Alicante are located in a sedimentary deposit, which can reach hundreds of meters, so site effects can be important. Additionally, most of the building stock belongs to periods without seismic normative, increasing, therefore, their vulnerability. Furthermore, following the damage caused by earthquakes in Spain, it has been observed that there are significant differences in the spatial distribution of damage from site to site in buildings with similar seismic behavior, located in a similar site. Hence, many authors have stated that the main factor responsible for the different damage distribution could be the building height. The seismic response of a building depends on its dynamic characteristics (fundamental period, T, damping ratio, ξ, and modal shape) and on the input ground motion. Among the existing methods to determine the T and ξ parameters, the best ones probably are to record weak earthquakes (or near explosions) or induced vibrations inside the building. However, both techniques need a very expensive and time-consuming effort when it is applied to a large number of buildings. A possible alternative is the measurement of ambient vibrations. In this work, ambient vibration measurements were performed at the geometrical center of the plan on the top floor of buildings with different height and year of construction in the municipality of Alicante and Elche (both in the Alicante province), assuming that this point coincides with the mass center of the floor. The preliminary results follow a linear relationship between the number of stories and the fundamental period. Finally, the results have been used to estimate the probability of resonance in several districts of both municipalities.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ambient noise measurements to constrain the geological structure of the güevéjar landslide (S Spain)

  • Delgado, José
  • Galiana-Merino, Juan Jose
  • García-Tortosa, Francisco Juan
  • Garrido, Jesús
  • Lenti, Luca
  • Martino, Salvatore
  • Peláez Montilla, José A.
  • Rodríguez Peces, Martín
  • Sanz de Galdeano, Carlos
  • Soler-Llorens, Juan L.
The reactivation of very large landslides may cause severe damage to society. Its prevention and management requires detailed information on the geometry and structure of these landslides, but the use of standard techniques (boreholes) may be prohibitive from an economic point of view. To overcome these difficulties, geophysical techniques are of special interest because they allow for studying very large areas at a reasonable cost. In this paper, we present a case study wherein the analysis of ambient noise allowed us to produce a model of a large landslide near Granada (southern Spain). The geometry and location of the failure zone, as well as the assessment of the state of involved materials, were estimated by combining two available boreholes and different geophysical techniques (downhole tests and the spectral analysis of ambient noise, horizontal to vertical spectral ratios (HVSR) and the frequency-wavenumber (f-k) methods). The results have allowed us to differentiate between values within the landslide mass with respect to those of stable materials, and to perform for the first time a comprehensive geological model of this unstable mass. Differences were also observed within the landslide mass (earth flow vs. slide zones), which are attributed to differences in the degree of alteration and the disturbance of the internal structure of materials constituting the landslide mass. These results show that techniques based on the measurement of ambient noise are of special interest for studying very large, highly remolded landslide masses, This study was funded by the EU (FEDER), by the Secretaría de Estado de Investigación, Desarrollo e Innovación of the Spanish government (projects CGL2015-65602-R and CGL2016-77688- R), by the Junta de Andalucía (project GGI3002IDIN), the Programa Operativo FEDER Andalucía 2014-2020-call made by the University of Jaén 2018, and by Research Groups VIGROB-184 and VIGROB-116 (University of Alicante)