Pasar al contenido principal

CUANTIFICACION Y MODELIZACION DEL TRANSPORTE DE RADON EN SUELOS. VALORACION DE SU RIESGO POTENCIAL Y USO COMO TRAZADOR GEOQUIMICO NATURAL

RTI2018-099052-B-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE ALICANTE

Resultados relacionados

Resultados totales (Incluyendo duplicados): 31
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Temperature-Induced Explosive Behaviour and Thermo-Chemical Damage on Pyrite-Bearing Limestones: Causes and Mechanisms

  • Martínez Ibáñez, Víctor|||0000-0003-4445-2896
  • Hidalgo Signes, Carlos|||0000-0001-6354-4994
  • Garrido De La Torre, Mª Elvira|||0000-0001-7804-3922
  • Benavente, D.
  • Tomás, R.
[EN] In this investigation, two different varieties of 'Prada' limestones were studied: a dark grey texture, bearing quartz, clay minerals, organic matter and pyrites, and a light grey texture with little or no presence of such components. We have observed two effects of different intensity when heating the dark texture from 400 degrees C: (1) the explosion of certain samples and (2) greater thermal damage than in the light grey texture. Chemical and mineralogical composition, texture, microstructure, and physical properties (i.e. colour, open porosity, P and S-wave velocity) have been evaluated at temperatures of 105, 300, 400, and 500 degrees C in order to identify differences between textures. The violence of the explosive events was clear and cannot be confounded with ordinary splitting and cracking on thermally treated rocks: exploded samples underwent a total loss of integrity, displacing and overturning the surrounding samples, and embedding fragments in the walls of the furnace, whose impacts were clearly heard in the laboratory. Thermogravimetric results allowed the identification of a process of oxidation of pyrites releasing SO2 from 400 degrees C. This process jointly with the presence of microfissures in the dark texture, would cause a dramatic increase in pore pressure, leading to a rapid growth and coalescence of microcracks that leads to a process of catastrophic decay in rock integrity. In addition to the explosive events, average ultrasound velocities and open porosity showed a greater variation in the dark grey texture from 400 degrees C. That result also points towards a significant contribution of oxidation of pyrites on the thermo-chemical damage of the rock, among other factors such as the pre-existence of microfissures and the thermal expansion coefficient mismatch between minerals. Implications in underground infrastructure and mining engineering works are critical, as the explosive potential of pyrite-bearing limestones bears risk for mass fracturing and dramatic strength decay from 400 degrees C. Moreover, SO2 released has harmful effects on health of people and the potential to form acid compounds that corrode materials, shortening their durability and increasing maintenance costs., The authors wish to acknowledge Dr Julio Company Rodriguez from the Universitat Politecnica de Valencia and Professor Juan Carlos Canaveras from the University of Alicante, for their valuable help on mineralogical and petrographic description of the rock, respectively, in addition, Mr. Manuel Angel Morilla Rubio from the Universitat Politecnica de Valencia for his support on laboratory tests. Also Kreum SA, Ayesa SA, Infraestructures de la Generalitat de Catalunya, S.A.U., and the Lleida regional roads authority (Servei Territorial de Carreteres de Lleida, Generalitat de Catalunya) for providing rock samples. This work was supported by the Spanish Government [Grant number RTI2018-099052-B-I00] and by the Department of Geological and Geotechnical Engineering, Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Effects of high temperatures in the physical, mechanical, and drilling features of Prada limestone.

  • Martínez Ibáñez, Víctor|||0000-0003-4445-2896
[ES] Esta investigación se centra en la caliza de Prada, una formación del Cretácico inferior ubicada en la zona sur pirenaica de Cataluña (España). Se tomaron muestras de roca de sondeos perforados durante la etapa de diseño del túnel de Tres Ponts. El trabajo aquí presentado explora diferentes aspectos relacionados con el comportamiento térmi-co de la caliza de Prada y las consecuencias derivadas en el túnel de Tres Ponts. En primer lugar, este trabajo describe la variación en las propiedades texturales, físicas y mecánicas de la caliza de Prada después de ser sometida a temperaturas de entre 105 y 600 ºC, y luego enfriada a un ritmo lento o mediante templado, y determina las tem-peraturas clave y los métodos de enfriamiento que afectan más la estabilidad en caso de incendio en el túnel de Tres Ponts. En segundo lugar, esta investigación se centra en las causas y mecanismos implicados en el comportamiento explosivo y la liberación de gas sulfuroso observado en una fracción gris oscuro de muestras de caliza de Prada. Las implicaciones de tales muestras de color gris oscuro son críticas en infraestructuras subterráneas y en minería, ya que el potencial explosivo de esas muestras conlleva el riesgo de fracturación masiva y de disminución brusca en la resistencia. Además, el gas sulfuroso liberado tiene efectos nocivos sobre la salud de las personas y el poten-cial de formar compuestos ácidos que corroen los materiales, acortando su durabilidad y aumentando los costes de mantenimiento. Posteriormente, este trabajo determina si el tratamiento térmico sobre la caliza de Prada tiene un efecto significativo en facilitar su perforabilidad. Comprender la variación en el rendimiento de perforación de la caliza de Prada tratada térmicamente ayudaría a mejorar la eficiencia de los medios mecánicos de excavación. Finalmente, se proponen algunas correlaciones para deter-minar indirectamente las características de resistencia, deformación y perforabilidad de la caliza de Prada tras ser tratada térmicamente, a partir de pruebas simples, rápidas y no destructivas., [CA] Aquesta investigació es centra en la calcària de Prada, una formació del Cretaci inferior situada a la zona sud pirinenca de Catalunya (Espanya). Es van prendre mostres de roca de sondejos perforats durant l'etapa de disseny del túnel de Tres Ponts. El treball aquí presentat explora diferents aspectes relacionats amb el comportament tèrmic de la calcària de Prada i les conseqüències derivades al túnel de Tres Ponts. En primer lloc, aquest treball descriu la variació en les propietats texturals, físiques i mecàniques de la calcària de Prada després de ser tractada a temperatures d'entre 105 i 600 ºC, i després refredada a un ritme lent o ràpid, i determina les temperatures clau i els mètodes de refredament que afecten més l'estabilitat en cas d'incendi al túnel de Tres Ponts. En segon lloc, aquesta investigació es centra en les causes i mecanismes implicats en el comportament explosiu i l'alliberament de gas sulfurós observat en una fracció gris fosc de mostres de calcària de Prada. Les implicacions de tals mostres de color gris fosc són crítiques en infraestructures subterrànies i en mineria, ja que el potencial explosiu d'aquestes mostres comporta el risc de fracturació massiva i de disminució brusca en la resistència. A més, el gas sulfurós alliberat té efectes nocius sobre la salut de les persones i el potencial de formar compostos àcids que corroeixen els materials, retallant la seua durabilitat i augmentant els costos de manteniment. Posteriorment, aquest treball determina si el tractament tèrmic sobre la calcària de Prada té un efecte significatiu en facilitar la seua perforabilitat. Comprendre la variació en el rendiment de perforació de la calcària de Prada tractada tèrmicament ajudaria a millorar l'eficièn-cia dels mitjans mecànics d'excavació. Finalment, es proposen algunes correlacions per determinar indirectament les característiques de resistència, deformació i perforabilitat de la calcària de Prada després de ser tractada tèrmicament, a partir de proves simples, ràpides i no destructives., [EN] This research is focused on Prada limestone, a lower Cretaceous formation located in the Catalan south Pyrenean zone (Spain). Rock samples were taken from boreholes drilled during the design stage of the Tres Ponts Tunnel. The work presented here explores different aspects related to the thermal behaviour of Prada limestone and the derived consequences on the Tres Ponts Tunnel. Firstly, this work reports the variation in the textural, physical, and mechanical properties of Prada limestone after being heated at temperatures of between 105 and 600 ºC and then cooled at a slow rate or by quenching and determines key temperatures and cooling methods that would most affect stability in case of a fire in the Tres Ponts Tunnel. Secondly, this research fo-cuses on the causes and mechanisms involved in the explosive behaviour and release of sulphurous gas observed on a dark grey fraction of samples from Prada limestone. Implications of such dark grey samples are critical in underground infrastructure and mining engineering works, as the explosive potential of that sample represents risk of mass fracturing and dramatic strength decay. Moreover, the sulphurous gas released has harmful health effects and may form acid compounds that corrode materials, shorten their durability, and increase maintenance costs. Later, this work determines if thermal treatment on Prada limestone has a significant effect on improving its drilla-bility. Understanding the variation in the drilling performance of the thermally treated Prada limestone would help improve the efficiency of mechanical excavation means. Finally, some correlations are proposed to indirectly determine the strength, deformational, and drillability features of Prada limestone after being thermally treated from simple, quick and non-destructive tests., This research was partially supported by the Spanish Government [grant number RTI2018-099052-B-I00], also the Vice-Rectorate of Research and Knowledge Transfer at the University of Alicante through projects UAUSTI19-25 and UAUSTI20-20, and by the Departamento de Ingeniería del Terreno at the Universitat Politècnica de València.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Temperature-Induced Explosive Behaviour and Thermo-Chemical Damage on Pyrite-Bearing Limestones: Causes and Mechanisms

  • Martínez-Ibáñez, Víctor
  • Benavente, David
  • Hidalgo Signes, Carlos
  • Tomás, Roberto
  • Garrido, M. Elvira
  • Benavente, David|||/items/93054314-55c1-4e9f-a84d-f461370acc10
  • Tomás, Roberto|||/items/09b36b99-47d8-4689-b68f-9311f1574d96
In this investigation, two different varieties of ‘Prada’ limestones were studied: a dark grey texture, bearing quartz, clay minerals, organic matter and pyrites, and a light grey texture with little or no presence of such components. We have observed two effects of different intensity when heating the dark texture from 400 °C: (1) the explosion of certain samples and (2) greater thermal damage than in the light grey texture. Chemical and mineralogical composition, texture, microstructure, and physical properties (i.e. colour, open porosity, P and S-wave velocity) have been evaluated at temperatures of 105, 300, 400, and 500 °C in order to identify differences between textures. The violence of the explosive events was clear and cannot be confounded with ordinary splitting and cracking on thermally treated rocks: exploded samples underwent a total loss of integrity, displacing and overturning the surrounding samples, and embedding fragments in the walls of the furnace, whose impacts were clearly heard in the laboratory. Thermogravimetric results allowed the identification of a process of oxidation of pyrites releasing SO2 from 400 °C. This process jointly with the presence of microfissures in the dark texture, would cause a dramatic increase in pore pressure, leading to a rapid growth and coalescence of microcracks that leads to a process of catastrophic decay in rock integrity. In addition to the explosive events, average ultrasound velocities and open porosity showed a greater variation in the dark grey texture from 400 °C. That result also points towards a significant contribution of oxidation of pyrites on the thermo-chemical damage of the rock, among other factors such as the pre-existence of microfissures and the thermal expansion coefficient mismatch between minerals. Implications in underground infrastructure and mining engineering works are critical, as the explosive potential of pyrite-bearing limestones bears risk for mass fracturing and dramatic strength decay from 400 °C. Moreover, SO2 released has harmful effects on health of people and the potential to form acid compounds that corrode materials, shortening their durability and increasing maintenance costs.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Air Quality Monitoring for Preventive Conservation of the Built Heritage Deteriorated by Salt Crystallization

  • Benavente, David
  • Pla, Concepción
  • Gil-Oncina, Sara
  • Ruiz, Maria Candela
  • Blanco-Quintero, Idael Francisco
  • Huesca Tortosa, José Antonio
  • Spairani-Berrio, Yolanda
  • Sánchez Moral, Sergio
  • Benavente, David|||/items/93054314-55c1-4e9f-a84d-f461370acc10
  • Blanco-Quintero, Idael Francisco|||/items/7fa3db0a-c737-4d07-92cc-9acf0634db50
  • Huesca Tortosa, José Antonio|||/items/220bbf08-3e9e-4bc9-a2f4-caba10df730b
  • Pla, Concepción|||/items/f9ff3ff5-c55e-4c85-83c1-f71fff810219
  • Spairani-Berrio, Yolanda|||/items/0a501213-b13c-4787-977a-22f81ee30d84
The Santo Domingo Diocesan School (Orihuela, SE Spain) is a singular case study that relates air quality monitoring and stone conservation. The monument suffers severe damage due to salt crystallization by rising damp, which is related to the indoor environment dynamics, high groundwater salt content, and microstructure, the building’s porous stone (biocalcarenite). Results revealed that 222Rn concentration in indoor air is low due to the building’s high ventilation rate, despite the medium-low geogenic radon potential in the area. Wavelets analysis showed that ventilation is caused by outdoor and indoor temperature variations and directly affects the 222Rn and CO2 dynamics inside the church. CO2, as well as relative humidity (RH), presented periodicities with intermediate frequencies (5–8 days) related to visits. These RH and temperature (T) variations intensified the salt damage by increasing the frequency of dissolution-crystallization cycles. The mineralogical characterization and geochemical calculations concluded that chlorides (halite and sylvite), sulfates (thenardite, epsomite, hexahydrite and aphthitalite) and nitrates (niter) present from dissolution forms to whiskers and hopper-type morphologies. This indicates high saturation values and, therefore, higher crystallization pressure values within the porous media of the biocalcarenite. On the contrary, the near-equilibrium crystal shape and incongruent precipitation reaction for humberstonite suggest a lower alteration for this salt on the building stone.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Estimation of uniaxial compressive strength and intrinsic permeability from ultrasounds in sedimentary stones used as heritage building materials

  • Benavente, David
  • Martínez Martínez, Javier
  • Galiana-Merino, Juan José
  • Pla, Concepción
  • Jongh, Marli de
  • García-Martínez, Noé
  • Benavente, David|||/items/93054314-55c1-4e9f-a84d-f461370acc10
  • Galiana-Merino, Juan José|||/items/2aeffb6f-7a89-465b-a756-a9ca8b74bb42
  • García-Martínez, Noé|||/items/35ea3f49-d77a-4740-8ca5-5bb024c9170c
  • Pla, Concepción|||/items/f9ff3ff5-c55e-4c85-83c1-f71fff810219
This paper combines ultrasonic parameters recorded from P- and S- waves and effective porosity to estimate uniaxial compressive strength, σC, and intrinsic permeability, k - two of the most crucial physical parameters used in stone conservation studies. The ultrasonic parameters have been chosen because they are sensitive to the microstructural properties of stones which influence both σC and k differently. Velocities of compressional or primary, Vp, and shear or secondary, Vs, elastic waves are related to porosity and the mineralogical composition; the waveform attenuation is related to the presence of vuggy macropores and pore and particle size; and the wavelength is related to the pore and particle size. Fifteen types of stones used in the Spanish built heritage were measured including calcarenites, sandstones, dolostones and travertines. Several simple and multiple predictive expressions for σC and k are fitted, which are quantified through the Pearson correlation coefficient, R. Curve fitting improves as the number of petrophysical parameters taken into account in the multiple linear regressions increases. The obtained Pearson's correlations values for σC are slightly higher than for k. The best correlation for σC (R = 0.921) and k (R = 0.903) is found when the predictive equation incorporates all of the elastic wave parameters obtained non-destructively, and the connected porosity. In general, effective porosity is statistically the most significant variable of the fitted regressions. The σC and k estimation from all the ultrasonic parameters, without considering connected porosity, shows a good correlation (R = 0.852 and 0.864, respectively). The addition of Vs to multiple regressions does not significantly improve the goodness of the fit. Consequently, the measurement of Vs is unnecessary as it is difficult and time-consuming. Finally, results also show that vuggy porosity (present in travertines) influences waveform attenuation and σC and k differently, relative to other microstructural properties; limiting the techniques use for stones with this type of porosity. Estimating σC and k using ultrasonic parameters exclusively is advantageous as the estimations can be obtained non-destructively using portable equipment, while also providing an acceptable goodness of fit.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Radon in dead-end caves in Europe

  • Briestenský, Miloš
  • Ambrosino, Fabrizio
  • Smetanová, Iveta
  • Thinová, Lenka
  • Šebela, Stanka
  • Stemberk, Josef
  • Pristašová, Lucia
  • Pla, Concepción
  • Benavente, David
  • Benavente, David|||/items/93054314-55c1-4e9f-a84d-f461370acc10
  • Pla, Concepción|||/items/f9ff3ff5-c55e-4c85-83c1-f71fff810219
We report the results of 3-years of Radon-222 monitoring in six show caves across Europe, selected with the feature of having only one, or no natural entrance, defined as dead-end caves. The caves are located in Spain, Slovakia, Slovenia, and Czechia. The consecutive monitoring was performed between January 2017 and January 2020. Continuous measurements of the radon activity concentration using spectrometry detection and analysis of the α-particles of 222Rn progeny were performed. Meteorological parameters influencing gas flow were recorded inside and outside of the caves. Although the radon activity concentrations differed from one cave to another, all six of the studied caves revealed very similar trends, showing evident seasonal variability with higher values in summer and lower values in winter. The measured values of radon activity concentrations ranged between 633 and 26,785 Bq/m3. The temperature differences between the inside and outside of the caves is the main radon movements driving force. The results of this study have significant practical implications, making it possible to provide cave administrators with recommendations regarding employee or visitor time-limited access to the investigated caves. Ours is the first comparative study encompassing the most interesting dead-end caves in Europe.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Analysis of Radon Measurements in Relation to Daily Seismic Activity Rates in the Vrancea Region, Romania

  • Galiana-Merino, Juan José
  • Molina-Palacios, Sergio
  • Kharazian, Alireza
  • Toader, Victorin-Emilian
  • Moldovan, Iren-Adelina
  • Gómez, Igor
  • Galiana-Merino, Juan José|||/items/2aeffb6f-7a89-465b-a756-a9ca8b74bb42
  • Gómez, Igor|||/items/0a4def63-1644-41da-a031-5d47de253f7f
  • Molina-Palacios, Sergio|||/items/3840fc9f-5100-466f-8908-a5ae04cf798d
Many previous research studies have shown how local and even regional earthquakes can significantly affect the release of radon in the soil. The aim of this work is to investigate the relationship between radon measurements and the daily seismic activity rate and develop a methodology that allows estimating the seismic activity rate using only radon measurements. To carry out this study, the earthquake catalogue of the Vrancea region (Romania) has been used to estimate the daily seismic activity rate during a given time period, in which radon measurements were also recorded, from January 2016 to September 2020. The Vrancea zone represents the most active seismic zone in Europe and is located on the eastern edge of the strongly bent Carpathian arc. In the case of the radon measurements, seasonal behaviours and linear trends due to non-seismic factors have been identified and subsequently removed. The discrete wavelet transform has been used to analyse the radon signal at two different scales: long and short periods. From the analysis carried out on a long-period scale, an approximate linear relationship has been obtained between the radon series and the daily seismic activity rate, which provides insights into the behaviour of the seismic activity in the study region with only the radon information. In addition, the study reveals certain characteristics that could be used as precursors of earthquakes at different scales: weeks in the case of the estimated daily seismic activity rate, and days in the case of the short-period signal obtained by the wavelet analysis. The results obtained for this region allow us to hope that the analysis of the radon time series can become an effective complement to the conventional seismic analysis used in operational earthquake forecasting.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Global models for 222Rn and CO2 concentrations in the Cave of Altamira

  • Sáez, Marina
  • Mangiarotti, Sylvain
  • Cuezva Robleño, Soledad
  • Fernández Cortés, Ángel
  • Molero, Beatriz
  • Sánchez Moral, Sergio
  • Benavente, David
  • Benavente, David|||/items/93054314-55c1-4e9f-a84d-f461370acc10
The purpose of this paper is to model numerically the dynamics of CO2 and 222Rn in cave atmospheres, particularly in the noteworthy Cave of Altamira (Spain). We aim to get a better understanding of the nature of these dynamics and their couplings with climatic controls, more specifically the soil water content, which role in the said dynamics poses some questions. For the first time, we apply the global modeling technique in the field of cave microclimate and atmospheric composition. The global modeling technique is a methodology based on the theory of nonlinear systems and designed to extract mathematical models directly from observational time series. We were able to extract four global models from our data. These models represent a step forward from the existent conceptual ones. They also show that CO2 and 222Rn dynamics can be approximated by low-dimensional, deterministic systems, which can be chaotic or, at least, close to chaos; this has decisive methodological consequences for future research. Moreover, the global modeling technique was used for the first time in a non-autonomous formulation; this enabled the possibility of studying the influence of the external forcing (soil water content) on the gas concentration in different scenarios.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Estimating the universal scaling of gas diffusion in coarse-textured soils

  • Valdes-Abellan, Javier
  • Benavente, David
  • Ghanbarian, Behzad
  • Moldrup, Per
  • Arthur, Emmanuel
  • Norgaard, Trine
  • Wollesen de Jonge, Lis
  • Benavente, David|||/items/93054314-55c1-4e9f-a84d-f461370acc10
  • Valdes-Abellan, Javier|||/items/910d2d4d-dcf5-4a2c-abb7-c13442d739e4
Gas diffusion, D, in partially saturated soils, constitutes a critical topic in soil sciences. However, it is a complex process and this limits its characterization and estimation. In this study, we analyzed and parameterized the soil gas diffusion using a combination of percolation theory (PT) and the effective-medium approximation (EMA). Here, we selected 126 coarse-textured soils with measurements including sand, silt, and clay content, bulk density, organic matter, porosity, soil water content measured at different pressure heads and saturation-dependent gas diffusion. First, we adopted the van Genuchten model, fit it to the soil water retention curve (SWRC), optimized its parameters, and determined the water content at the inflection point. Second, the parameters of the universal scaling law from PT and EMA were optimized by directly fitting the model to the saturation-dependent gas diffusion data. Those parameters are (1) the critical air-filled porosity, εc, (2) the crossover air-filled porosity, εx, at which the gas movement behavior changes from the percolation theory domain to the EMA domain; and (3) the average pore coordination number, z. Next, a multiple linear regression analysis (MLRA) was applied to link εc, εx and z to other soil parameters, such as soil textural and/or hydraulic properties. Uncertainties in our results were evaluated using a jack-knife resampling technique, which involved applying the MLRA more than 7000 times. Results revealed that the most accurate estimations were obtained when both soil textural and hydraulic properties were used simultaneously. However, the use of only soil textural parameters presents practical advantages, as it provides excellent estimations for εx and z, although not for εc. The latter is a critical parameter in the application of the PT and EMA to gas diffusion that requires both the soil basic properties and water saturation curve properties to be correctly estimated.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Factores ambientales condicionantes de la dinámica del radón: estudio de su potencial geogénico en suelos

  • Gil-Oncina, Sara
El radón es un gas radioactivo que supone un riesgo para la salud. Para evaluar este riesgo en la presente tesis se utiliza el potencial de radón geogénico, que da información sobre su actividad y la facilidad que tiene de moverse en el suelo (permeabilidad) mediante la calificación de tres índices (bajo, medio, alto). Estos parámetros se obtienen tanto de mediciones en campo como de estimaciones (agua, textura, temperatura, radio y emanación). El objetivo principal de esta tesis consiste en estudiar y cuantificar los procesos y las variables condicionantes de la producción (emanación) y transporte del radón en suelos, así como en mejorar la estimación del potencial de radón para perfeccionar la prevención y actuación frente al riesgo a su exposición. La investigación se dividió en tres partes: i) un experimental en columnas artificiales de suelos expuestas a un clima semiárido, para estudiar el comportamiento del radón frente a las variables ambientales, especialmente frente al agua; ii) simulaciones de diferentes climas y texturas de suelo para estudiar su implicación en el potencial de radón, y iii) la modelización del potencial de radón en diferentes contextos suelo-clima, la creación de una metodología de evaluación del potencial de radón y su implementación y validación en la aplicación web RadonPotential. En la primera parte, se han obtenido series de datos del radón que muestran un patrón estacional vinculado a las precipitaciones y al contenido de agua del suelo asociado, con una actividad mayor en los periodos más húmedos. Los análisis estadísticos y de wavelet parametrizan dicho patrón, siendo los resultados más robustos en el suelo más arenoso. También demuestran que presión, temperatura y viento afectan al radón en ambos suelos, pero de forma menos significativa. Los resultados de variación de contenido de agua de ambos suelos, junto con los análisis de escenarios teóricos, revelan que los climas con lluvias más abundantes tendrían suelos con mayores cantidades de radón, para valores similares de contenido de radio. Esto se debe a que se potencia la emanación y se reduce su movilidad, incrementando su actividad. Aun así, para los suelos estudiados, el potencial de radón se clasificó con un índice bajo, lo que se atribuye principalmente al bajo contenido en radio. La parametrización de suelo-clima muestra que tanto un cambio de clima como las variaciones estacionales interanuales pueden modificar la permeabilidad del gas en los suelos de texturas más finas, en un orden de entre 100 y 1000 veces, lo que conlleva a cruzar el límite entre dos índices de potencial de radón. Además, se ha desarrollado una metodología para la evaluación del potencial de radón que combina la estimación del radón y la permeabilidad del gas a partir de varias ecuaciones, al mismo tiempo que se ha implantado y validado en el desarrollo de la aplicación web RadonPotential. Los resultados de esta tesis doctoral permiten ampliar el conocimiento sobre la dinámica del radón en el suelo con especial enfoque en el clima y la textura del suelo como condicionantes del potencial de radón. La variación en el régimen de precipitación deriva en el contenido de agua del suelo y, por tanto, en la permeabilidad del gas. Se ha demostrado que la monitorización continua es crucial para entender los cambios estacionales del radón. Los resultados presentados proporcionan nuevos avances que deberían considerarse para actualizar las estrategias en el desarrollo de mapas más precisos y fiables de potencial de radón y en normativas que lo regulen. Las medidas para reducir el riesgo de radón no deberían ser las mismas para contextos distintos solo porque compartan similitudes en geología o pedología.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Comparative analysis of water condensate porosity using mercury intrusion porosimetry and nitrogen and water adsorption techniques in porous building stones

  • Benavente, David
  • Such-Basañez, Ion
  • Fernández Cortés, Ángel
  • Pla, Concepción
  • Cazorla-Amorós, Diego
  • Cañaveras, Juan C.
  • Sánchez Moral, Sergio
  • Benavente, David|||/items/93054314-55c1-4e9f-a84d-f461370acc10
  • Cañaveras, Juan C.|||/items/a5988686-5d8d-4ce2-8f43-a9c27df34477
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Pla, Concepción|||/items/f9ff3ff5-c55e-4c85-83c1-f71fff810219
Condensate porosity in porous materials has a significant influence on comfort, energy consumption, and material’s strength and durability. The variation of the moisture content of the material for a given variation of relative humidity describes the moisture storage capacity and has to be determined experimentally through the water sorption isotherm. However, the characterisation of sorption isotherm is very time-consuming, mostly for high relative humidity conditions, which may cause experimental errors and reproducibility problems. This paper aims to estimate experimental water condensate porosity using mercury intrusion porosimetry and nitrogen adsorption technique considering pores smaller than 0.1 μm for a wide range of porous sedimentary rock types with different petrographic characteristics. Particularly for nitrogen adsorption characterisation, we interpolated the pore volume using BJH method applied to the desorption branch. In the water adsorption test, condensate porosity is obtained with the maximum adsorbed water at RH = 100%. The ratio between water condensate porosity and total porosity in the studied porous stones is important and varies from 2 to 38%. Nitrogen adsorption technique provides the best estimation of condensate porosity (R2 = 0.979) and an effective estimation of water condensate porosity. The correlation between condensate porosity using MIP is moderate (R2 = 0.892) and presents a wider dispersion for all the range of condensate porosity. A mathematical expression that fits the shape and curvature of the water isotherm was also analysed in terms of pore structure. These studies are scarce for porous stones and our results provide valuable information for these widely used construction and building material.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Responses of underground air and drip water geochemistry to meteorological factors: A multi-parameter approach in the Rull Cave (Spain)

  • Ruiz, Maria Candela
  • Pla, Concepción
  • Fernández Cortés, Ángel
  • Benavente, David
  • Benavente, David|||/items/93054314-55c1-4e9f-a84d-f461370acc10
  • Pla, Concepción|||/items/f9ff3ff5-c55e-4c85-83c1-f71fff810219
Our research aims to assess the complex interactions between the elements that constitute and influence a cave system through the analysis of an extensive dataset of climatic and environmental parameters (222Rn, CO2, drip rates, chemical composition, and environmental isotopes) measured in air, water, and solid in the Rull Cave (southeastern Spain). Of particular importance is understanding the effect of rainfall and temperature on water and gas transport through the epikarst and the involved processes. Our results show that the cave gaseous concentration patterns do not only depend on the temperature-caused movement of air masses, but they can also be affected by abundant rainfall. The δ18O and δD composition of cave water also relies on such precipitations for the effective transfer of the rainfall signal into the cave, which can take between 3 and 7 days. The elemental ratios (Sr/Ca and Mg/Ca) show high responsiveness to the water drip rate, hinting that enhanced prior calcite precipitation (PCP) occurs at slower drip rates. Despite this, and regardless of drip rates, calcite saturation indices follow a seasonal variation pattern inversely proportional to the cave air CO2 concentration, while δ13C-DIC is proportional. Our results show how the interlinkage between these multiple components defines the dynamics of the atmosphere-soil-cave system. Cave monitoring is then essential to understand the karstic vadose zone, which is highly sensitive to climatic influence and its changes.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Thermal effect of high temperatures on the physical and mechanical properties of a granite used in the UNESCO World Heritage of the north of Portugal

  • Tomás, Roberto
  • Cano, Miguel
  • Pulgarín Canaval, Luis Fernando
  • Brotons, Vicente
  • Benavente, David
  • Miranda, Tiago
  • Vasconcelos, Graça
  • Benavente, David|||/items/93054314-55c1-4e9f-a84d-f461370acc10
  • Cano, Miguel|||/items/38b494d6-7a64-43b5-a4ee-6fd963130f19
  • Tomás, Roberto|||/items/09b36b99-47d8-4689-b68f-9311f1574d96
This work discusses the results from a set of physical and mechanical test conducted on 46 cubic samples of a granite from the north of Portugal widely used in local granite-built UNESCO World Heritage, heated in a furnace at temperatures ranging from 105 to 700º C and cooled under different conditions. Then, the obtained results are compared with an extensive database of published case studies, showing that porosity, unit weight, ultrasonic waves velocities, elastic modulus and uniaxial compressive stress variations are mostly related to the induced thermal-stress caused by the anisotropic thermal expansion of the mineral grains. Only mineralogy and specific gravity do not exhibit changes for the studied range of temperatures. For specimens heated to above 500ºC, degradation processes predominate due to alpha-beta phase transition in quartz grains, considerably increasing the linear crack density, length and width and reducing the rock properties. Regarding the influence of the cooling method, thermal effects are amplified when cooling is performed by water immersion because of the inhomogeneous shrinkage and the subsequent tension stress between adjacent particles due to temperature decrease that develop at different pace within the samples. Scanning electron microscopy confirms the increase of damage and the negative effect on the granite properties caused by thermal treatment from 500ºC and by water cooling. For temperatures lower than 500ºC a hardening effect slightly improving elastic modulus and uniaxial compressive strength is observed in slowly and quickly cooled samples. The derived conclusions considerably improve the knowledge about the behaviour against temperature of this type of granite, with the purpose of evaluating the integrity level of granite-built UNESCO cultural heritage of the north of Portugal.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

KarsTS: an R package for microclimate time series analysis

  • Sáez, Marina
  • Pla, Concepción
  • Cuezva Robleño, Soledad
  • Benavente, David
  • Benavente, David|||/items/93054314-55c1-4e9f-a84d-f461370acc10
  • Pla, Concepción|||/items/f9ff3ff5-c55e-4c85-83c1-f71fff810219
KarsTS 2.2 is free, open-source, R-based software for microclimate time series, especially suited to the study of underground or highly insulated environments. The time series of interest include air temperature, humidity, and CO2 and 222Rn content, amongst others. These time series usually pose problems such as gaps, outliers, noise or relative shortness. KarsTS was born as a package for gap filling and thus, it offers multiple univariate and multivariate gap-filling tools well suited to these variables. However, as KarsTS was intended to be a self-sufficient program, it soon grew to encompass several tools for linear and nonlinear time series analysis, preprocessing and plotting. Indeed, many of these variables show a nonlinear behavior that is often disregarded; for this reason, we aim to spread and facilitate the use of some methodologically appropriate analysis tools, even amongst researcher that do not feel comfortable using a console. In this paper, we introduce an overview of KarsTS functionality and we show its potential through some practical application examples on four-year time series of temperature from the Rull cave (Spain).
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Recovery of Polluted Urban Stormwater Containing Heavy Metals: Laboratory-Based Experiments with Arlita and Filtralite

  • Pla, Concepción
  • Benavente, David
  • Valdes-Abellan, Javier
  • Jódar-Abellán, Antonio
  • Benavente, David|||/items/93054314-55c1-4e9f-a84d-f461370acc10
  • Pla, Concepción|||/items/f9ff3ff5-c55e-4c85-83c1-f71fff810219
  • Valdes-Abellan, Javier|||/items/910d2d4d-dcf5-4a2c-abb7-c13442d739e4
  • Jódar-Abellán, Antonio|||/items/63df868f-a912-42b0-a0a0-223937d79083
Heavy-metal sources in urban environments include automobile exhaust, fuel combustion, tires, road asphalt, weathering of building materials, and/or industrial activities. The presence of heavy metals in urban stormwaters constitutes a potential risk for water resources and aquatic life. Results from the present study demonstrated the effectiveness of two different lightweight aggregates (LWAs), Arlita and Filtralite, to remove heavy metals (Ni, Cu, Zn, Cd, and Pb) present in aqueous solutions. These materials were selected because they previously showed great results for water treatment and because of their physicochemical properties. The removal efficiency of the studied materials was evaluated with batch tests containing solutions contaminated with heavy metals (with individual and multiple contaminants) at different concentrations mixed with the LWA particles. Filtralite showed a better performance in heavy metal removal than Arlita: higher adsorption capacity for all metals, and lower release of metals from contaminated particles into washing water. The average removal capacities in tests developed with solutions containing individual contaminants for Arlita and Filtralite were 76% and 90%, respectively, although the values varied across the different contaminants. Metal elimination by LWAs was more effective with individual contaminated solutions than with multielemental ones. The analysis of the adsorption curves, the mineral precipitation on the LWA surface, and the geochemical modeling confirmed that two different mechanisms are responsible for the heavy-metal removal. First, the rough surface of the LWA presents sorbing surface sites of the forming minerals, resulting in the ion-exchange reactions of metal ions. Second, the LWA–water interaction causes an increase in solution pH, which triggers the precipitation and coprecipitation of the metals in the form of oxide and hydroxides. The study confirms that the use of Arlita and especially Filtralite present promising potential to remove heavy metals from urban stormwaters.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Improving uniaxial compressive strength estimation of carbonate sedimentary rocks by combining minimally invasive and non-destructive techniques

  • Benavente, David
  • Fort González, Rafael
  • Gómez Heras, Miguel
  • Benavente, David|||/items/93054314-55c1-4e9f-a84d-f461370acc10
Uniaxial compressive strength (UCS) is the most used parameter to measure rock strength. However, restrictions in sampling large volume of material, the need of very large set of results and onsite characterisation of UCS non-destructively are requirements in many scientific and engineering investigations. The estimation of UCS from a single non-destructive or minimally invasive technique (NDT) may result incomplete because each NDT is sensitive to different compositional and textural factors. This paper combines open porosity, P-wave velocity, Leeb hardness and micro-drilling resistance force to estimate USC for a wide range of carbonate sedimentary rock types with different petrographic characteristics. Results reveal that mineralogical composition significatively affects micro-drilling resistance force profiles and P-wave velocity values, especially for quartz-bearing rocks. In addition, texture controls substantially the reproducibility of tests sensible to rock surface properties, such as Leeb hardness and micro-drilling resistance force. Fifteen simple and multiple expressions for UCS are fitted. Linear expressions have shown better coefficients of determination (R2) than non-linear equations because of the linearity shown by individual parameters. Curve fitting improves as the number of petrophysical parameters increase in the multiple linear regression analysis. The best correlation is found when the equation incorporates all the mechanical parameters obtained non-destructively as well as open porosity (R2 = 0.910). Leeb hardness is always the most significant variable of the fitted regressions and its addition into multiple linear equations causes an increase of R2. Open porosity also improves R2 whereas drilling force and P-wave velocity have a lower statistical weight in the expressions. The UCS estimation from all NDT, without considering open porosity, shows a good correlation (R2 = 0.899), which presents the advantage that they can be obtained non-destructively with portable equipment and can provide a numerous set of results at relatively low cost.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

RadonPotential: An interactive web application for radon potential prediction under different climates and soil textures

  • Galiana-Merino, Juan José
  • Gil-Oncina, Sara
  • Valdes-Abellan, Javier
  • Soler Llorens, Juan Luis
  • Benavente, David
  • Benavente, David|||/items/93054314-55c1-4e9f-a84d-f461370acc10
  • Galiana-Merino, Juan José|||/items/2aeffb6f-7a89-465b-a756-a9ca8b74bb42
  • Valdes-Abellan, Javier|||/items/910d2d4d-dcf5-4a2c-abb7-c13442d739e4
The presence of radon in soil poses a significant health risk when it enters and concentrates indoors. The primary health problem associated with radon exposure is lung cancer, but it can also contribute to other respiratory issues. Estimating radon potential is a challenging task caused by the interaction of various environmental, geological, and variability factors. Although efforts are ongoing to improve radon potential assessment methodologies, there is a lack of software tools that estimate and model radon potential in different scenarios. The paper aims to develop a novel web-based software tool, RadonPotential, that predicts Geogenic Radon Potential by considering variations in climate and soil textures. The program runs using a constant radon concentration or estimates its concentration from the radium activity. RadonPotential calculates the transport of radon through a soil profile based on water content and soil texture. It also determines the dynamics of soil water content in different climates, incorporating long-term weather data under various climatic scenarios and local weather time series. The web-based format of the program increases its dissemination, usage, and manageability among a larger user base compared to an installable computer program. The program aims to provide a simplified and effective characterization of radon potential levels accessible to a wide range of scientists, technical experts and policymakers in developing strategies not only for radon measurement and mitigation buildings but also for developing more reliable large-scale radon potential maps.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Radon Dynamics in Granite and Calcareous Soils: Long-Term Experiments in a Semi-Arid Context

  • Gil-Oncina, Sara
  • Pla, Concepción
  • Valdes-Abellan, Javier
  • Fernández Cortés, Ángel
  • Benavente, David
  • Benavente, David|||/items/93054314-55c1-4e9f-a84d-f461370acc10
  • Pla, Concepción|||/items/f9ff3ff5-c55e-4c85-83c1-f71fff810219
  • Valdes-Abellan, Javier|||/items/910d2d4d-dcf5-4a2c-abb7-c13442d739e4
Radon in soil poses a significant health risk when it accumulates inside dwellings. The estimation of radon potential is a difficult task due to the complex dynamics of radon within soil and its relations with the weather. This research focuses on the variability of radon activity, driven by environmental changes, assessed in two loam soils (loamy sand–granite soil and silty clay loam-calcareous soil) with different radium contents. We conducted an experiment with teow soil columns in a semi-controlled outdoor laboratory, in a warm semi-arid climate. We also examined the consequences of abundant rainfall on radon activity through artificial soil water content (SWC) experiment conditions. Statistical analyses reveal that SWC is the most significant parameter influencing radon activity in these experiments. Radon is proportional to SWC and inversely proportional to temperature, evapotranspiration, and pressure in both soils, while wind is negatively related only in the loamy sand soil. Based on our findings, we modelled radon potential considering different soils and climatic contexts. SWC influences radon potential by changing radon emanation, activity, and permeability, depending on the local soil texture and radium concentration.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Estimation of the Radon Risk Under Different European Climates and Soil Textures

  • Gil-Oncina, Sara
  • Valdes-Abellan, Javier
  • Pla, Concepción
  • Benavente, David
  • Benavente, David|||/items/93054314-55c1-4e9f-a84d-f461370acc10
  • Pla, Concepción|||/items/f9ff3ff5-c55e-4c85-83c1-f71fff810219
  • Valdes-Abellan, Javier|||/items/910d2d4d-dcf5-4a2c-abb7-c13442d739e4
Radon is a radioactive gas produced from the natural radioactive decay of uranium and is found in almost all rocks and soils. In confined places (e.g., dwellings, workplaces, caves, and underground mines), radon may accumulate and become a substantial health risk since it is considered the second most important cause of lung cancer in many developed countries. Radon risk assessment commonly considers either field or estimate values of the radon concentration and the gas permeability of soils. However, radon risk assessment from single measurement surveys to radon potential largescale mapping is strongly sensitive to the soil texture variability and climate changes, and particularly, to the soil water content dynamic and its effect on soil gas permeability. In this paper, the gas permeability of soils, and thus, the estimation of radon risk, is studied considering the effect of three different climates following the Köppen classification and four soil textures on soil water content dynamics. This investigation considers the CLIGEN weather simulator to elaborate 100-year length climatic series; Rosseta 3 pedotransfer function to calculate soil hydraulics parameters, and the HYDRUS-1D software to model the dynamics of water content in the soil. Results reveal that climate strongly affects gas permeability of soils and they must be considered as an additional factor during the evaluation of radon exposure risk. The impact of climate and texture defines the soil water content dynamic. Coarse soils show smaller gas permeability variations and then radon risk, in this case, is less affected by the climate type. However, in clay soils, the effect of climate and the differences in soil water content derive in gas permeability variations between 100 and 1,000 times through an annual cycle. As a result, it may cross the boundary between two radon risk categories. Results deeply confirm that both climate and texture should be compulsory considered when calculating the radon exposure risk and in the definition of new strategies for the elaboration of more reliable geogenic radon potential largescale maps.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Automatic detection and characterisation of the first P- and S-wave pulse in rocks using ultrasonic transmission method

  • Benavente, David
  • Galiana-Merino, Juan José
  • Pla, Concepción
  • Martínez Martínez, Javier
  • Crespo Jiménez, David
  • Benavente, David|||/items/93054314-55c1-4e9f-a84d-f461370acc10
  • Galiana-Merino, Juan José|||/items/2aeffb6f-7a89-465b-a756-a9ca8b74bb42
  • Pla, Concepción|||/items/f9ff3ff5-c55e-4c85-83c1-f71fff810219
In this paper, we propose a new methodology for the automatic picking of P- and S- wave arrivals. The measurement of elastic wave velocities is crucial for characterisation of the elastic properties of rocks, as well as their physico-mechanical properties and durability. P-waves are easy to generate and acquire, whereas the acquisition and subsequent analysis of the S-waves present major difficulties in most investigations of rocks. In our proposed method the recorded signal is first pre-processed in the wavelet domain, removing low-frequency disturbances and filtering noise. The signal is then analysed in the time-domain to detect and characterise the first pulse and, subsequently, estimate the corresponding onset time. The automatic approach analyses all pulses detected in the output signal and selects the first pulse of the P or S wave relative to symmetry, amplitude and duration criteria. This triple check provides greater confidence in the obtained results. We record P- and S- waveforms through the transmission method for a broad range of sedimentary, igneous and metamorphic rocks used in buildings. Results are compared to manual picking, which is considered as a true or reference value. The recorded signals show that microstructural components of rocks have a strong influence on the output signal. Mineralogical composition, porosity and particle size affect the wave velocity, attenuation, wavelength and waveform, which in turn influences the manual picking of the onset time. The proposed methodology provides precise values of the onset time of P- and S- waves. The discrepancies between automatic and manual P- and S- wave picking are 0.7 and 4.4%, respectively. P-wave signals have a high signal-to-noise ratio and their arrival times are clear and easy to determine. However, the arrival time of S-waves presents significant problems, mainly for medium to coarse-grained rocks. In this case, the output signal is contaminated by P-waves and has a lower signal-to-noise ratio. Besides, propagation of the S-wave through the rock affects the frequency and waveform of the first pulse, which complicates manual picking of the onset time. The developed methodology distinguishes between the S-wave and the remaining P-waves contained in the transversal signal, independently of the skill and subjectivity of a human analyst.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

222Rn and CO2 monitoring in soil and indoor atmosphere to understand changes in the gaseous dynamics of Rull cave (Spain)

  • Pla, Concepción
  • Ruiz, Maria Candela
  • Gil-Oncina, Sara
  • García-Martínez, Noé
  • Cañaveras, Juan C.
  • Cuezva Robleño, Soledad
  • Fernández Cortés, Ángel
  • Sánchez Moral, Sergio
  • Benavente, David
  • Benavente, David|||/items/93054314-55c1-4e9f-a84d-f461370acc10
  • Cañaveras, Juan C.|||/items/a5988686-5d8d-4ce2-8f43-a9c27df34477
  • García-Martínez, Noé|||/items/35ea3f49-d77a-4740-8ca5-5bb024c9170c
  • Pla, Concepción|||/items/f9ff3ff5-c55e-4c85-83c1-f71fff810219
Rull cave is a karstic cave located in Vall d’Ebo (Alicante, Southeast of Spain) developed in massive Miocene conglomerates and Cretaceous limestones. Processes in soil above Rull cave and outdoor atmosphere directly influence the underground environment of the cave. Continuous and discrete monitoring of cave atmosphere and soil (from 2012 to 2022) allows to characterise the spatial distribution and temporal variations of the gaseous concentration (222Rn and CO2) and understand the relationship between the processes which occurred in the 3-component system (soil-cave-atmosphere). Besides the presence of visitors, Rull cave maintains stable values of mean temperature (16.2 °C) and relative humidity (97.6%). In an annual cycle the cave presents two different gaseous stages (stagnation and ventilation). Maximum average values of CO2 and 222Rn concentration are reached within the stagnation stage, in the warmest period of the year. On the contrary, in the ventilation stage (in the coldest months) the cave reaches the lowest concentrations in its inner atmosphere. For the study period, daily average CO2 and 222Rn concentrations are 2008 ppm and 1745 Bq/m3, respectively. Results show that the dynamics of 222Rn and CO2 in the cave air follow different patterns defined by the complex relationships between external and internal factors. Findings from this study provide substantial information about the environmental situation of the cave atmosphere in terms of air quality for visitors and workers.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Hydrological and geochemical connections in a Mediterranean karst system: A comprehensive study on surface-subsurface interactions

  • Ruiz, Maria Candela
El karst es un entorno geológico que se origina en la disolución de rocas solubles como la caliza. La convergencia de factores climáticos, geológicos y biológicos da forma colectivamente y condiciona estos ambientes, desde la superficie hasta la capa acuífera más profunda. Las actividades humanas y el cambio climático pueden modificar estas complejas conexiones, al alterar la calidad y/o disponibilidad del agua, promover la degradación del suelo, o cambiar la vegetación. Para obtener una perspectiva integrada de los ambientes kársticos en el contexto de un clima mediterráneo, en el sector norte de la provincia de Alicante se analizaron dos secciones dentro del perfil vertical: la parte superficial del sistema kárstico, concretamente la interfaz atmósfera-suelo-epikarst representada por la Cueva del Rull, donde se producen multiplicidad de fenómenos que moldean el karst superficial; y el karst más profundo, en la zona saturada, representado por el acuífero Almudaina-Segaria. El propósito de esta tesis doctoral es investigar las características y procesos que tienen lugar en un sistema kárstico mediterráneo, comprendiendo también la posible influencia de factores climáticos y antropogénicos sobre los diferentes componentes del sistema. Estos objetivos fueron alcanzados mediante numerosas técnicas de recolección y procesamiento de datos, análisis, modelización e interpretación de los resultados obtenidos, entre las que destacan el muestreo y la medición de parámetros ambientales y parámetros fisicoquímicos del aire, agua, y sólido, análisis e intersección de datos espaciales georreferenciados en Sistemas de Información Geográficos, y la utilización de gas radón, un gas inerte y radiactivo, como trazador geoquímico de movimientos de masas de aire y agua. Los resultados muestran que, en la zona kárstica estudiada, las intervenciones o modificaciones en la superficie, tanto en el territorio como en las condiciones climáticas, y sean naturales o de origen antrópico, pueden tener impactos significativos en el volumen y calidad del agua, así como también en los procesos que tienen lugar a diferentes profundidades. La dinámica y propiedades del agua y los gases en la zona vadosa somera responde a los cambios en las condiciones meteorológicas y, en el caso de la Cueva del Rull, a las concentraciones de gases como CO2 y radón, que varían estacionalmente. La hidrología y dinámicas gaseosas de los paisajes kársticos se caracteriza por interacciones complejas y dinámicas entre los parámetros ambientales, el entorno geológico, y el agua superficial y subterránea. La sensibilidad de estos ambientes concede una vulnerabilidad intrínseca al equilibrio natural de los paisajes kársticos, cuya eventual modificación involucra consecuencias complejas y, potencialmente, de gran alcance para los recursos hídricos, los ecosistemas y las comunidades humanas. La presente tesis doctoral contribuye al entendimiento de los entornos kársticos mediterráneos, revelando su gran complejidad y sensibilidad a las modificaciones ambientales. La investigación integrada, interdisciplinar y especializada en cada contexto local constituye una base sólida imprescindible para el desarrollo de estrategias de gestión que garanticen la sustentabilidad de los ambientes kársticos y sus ecosistemas.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Role of subterranean microbiota in the carbon cycle and greenhouse gas dynamics

  • Martin-Pozas, Tamara
  • Cuezva Robleño, Soledad
  • Fernández Cortés, Ángel
  • Cañaveras, Juan C.
  • Benavente, David
  • Jurado Lobo, Valme
  • Sáiz Jiménez, Cesáreo
  • Janssens, Ivan A.
  • Seijas, Naomi
  • Sánchez Moral, Sergio
  • Benavente, David|||/items/93054314-55c1-4e9f-a84d-f461370acc10
  • Cañaveras, Juan C.|||/items/a5988686-5d8d-4ce2-8f43-a9c27df34477
Subterranean ecosystems play an active role in the global carbon cycle, yet only a few studies using indirect methods have focused on the role of the cave microbiota in this critical cycle. Here we present pioneering research based on in situ real-time monitoring of CO2 and CH4 diffusive fluxes and concurrent δ13C geochemical tracing in caves, combined with 16S microbiome analysis. Our findings show that cave sediments are promoting continuous CH4 consumption from cave atmosphere, resulting in a significant removal of 65% to 90%. This research reveals the most effective taxa and metabolic pathways in consumption and uptake of greenhouse gases. Methanotrophic bacteria were the most effective group involved in CH4 consumption, namely within the families Methylomonaceae, Methylomirabilaceae and Methylacidiphilaceae. In addition, Crossiella and Nitrosococcaceae wb1-P19 could be one of the main responsible of CO2 uptake, which occurs via the Calvin-Benson-Bassham cycle and reversible hydration of CO2. Thus, syntrophic relationships exist between Crossiella and nitrifying bacteria that capture CO2, consume inorganic N produced by heterotrophic ammonification in the surface of sediments, and induce moonmilk formation. Moonmilk is found as the most evolved phase of the microbial processes in cave sediments that fixes CO2 as calcite and intensifies CH4 oxidation. From an ecological perspective, cave sediments act qualitatively as soils, providing fundamental ecosystem services (e.g. nutrient cycling and carbon sequestration) with direct influence on greenhouse gas emissions.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Remediation by waste marble powder and lime of jarosite-rich sediments from Portman Bay (Spain)

  • Benavente, David
  • Pla, Concepción
  • Valdes-Abellan, Javier
  • Cremades-Alted, Silvia
  • Benavente, David|||/items/93054314-55c1-4e9f-a84d-f461370acc10
  • Pla, Concepción|||/items/f9ff3ff5-c55e-4c85-83c1-f71fff810219
  • Valdes-Abellan, Javier|||/items/910d2d4d-dcf5-4a2c-abb7-c13442d739e4
We investigate the use of hydrated lime and calcite waste marble powder as remediation treatments of contaminated jarosite-rich sediments from Portman Bay (SE, Spain), one of the most contaminated points in the Mediterranean coast by mining-metallurgical activities. We tested two commercial hydrated limes with different Ca(OH)2 percentages (28 and 60% for Lime-1 and Lime-2 respectively) and two different waste marble powder, WMP, from the marble industry (60 and 96% of calcite for WMP-1 and WMP-2 respectively). Mixture and column experiments and modelling of geochemical reactions using PHREEQC were performed. Lime caused the precipitation of hematite, gypsum and calcite, whereas WMP treatments formed iron carbonates and hematite. The fraction of amorphous phases was mainly composed of iron oxides, hydroxides and oxyhydroxides that was notably higher in the lime treatment in comparison to the WMP treatment. The reactive surface area showed a positive trend with the amorphous phase concentration. Results highlighted the effectiveness of lime treatments, where Lime-2 showed a complete elimination of jarosite. Column experiments revealed a clear reduction of heavy metal concentration in the lixiviate for the treated sediments compared to the original sediments. Particularly, Lime-2 showed the highest reduction in the peak concentration of Fe, Mn, Zn and Cd. The studied treatments limited the stabilisation of Cr and Ni, whereas contrarily As increases in the treated sediment. PHREEQC calculations showed that the most concentrated heavy metals (Zn and Mn) are stabilized mainly by precipitation whereas Cu, Pb and Cd by a combination of precipitation and sorption processes. This chemical environment leads to the precipitation of stable iron phases, which sorb and co-precipitate considerable amounts of potentially toxic elements. Lime is significantly more effective than WMP, although it is recommended that the pH value of the mixture should remain below 9 due to the amphoteric behaviour of heavy metals.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Estimation of soil gas permeability for assessing radon risk using Rosetta pedotransfer function based on soil texture and water content

  • Benavente, David
  • Valdes-Abellan, Javier
  • Pla, Concepción
  • Sanz-Rubio, Enrique
  • Benavente, David|||/items/93054314-55c1-4e9f-a84d-f461370acc10
  • Pla, Concepción|||/items/f9ff3ff5-c55e-4c85-83c1-f71fff810219
  • Valdes-Abellan, Javier|||/items/910d2d4d-dcf5-4a2c-abb7-c13442d739e4
Radon is a natural source of radioactivity and it can be found in all soils and rocks in the Earth. The presence of radon gas in indoor environments implies a serious risk for human health, already listed as carcinogenic by the World Health Organization. The most relevant methods to infer the risk for radon exposure are based on soil radon concentration and gas permeability that describe the effective radon movement in the soil. However, they neglect crucial soil properties and water content in soil, which can affect greatly soil permeability to gases. Additionally, soil permeability measurement remains expensive, difficult and time-consuming. In this paper we show a new and simple methodology to infer radon risk based on Rosetta3 pedotransfer function as well as soil texture and water content. We also determine the influence of soil texture both on the gas permeability variation in dependence on water content and on the parameter n of the van Genuchten –Mualem model, which establishes the shape of the relative permeability curves. We show that radon risk exposure may change importantly for the same soil with different soil water contents. We finally apply and validate the proposed method using radon permeability data from the Canadian component of the North American Soil Geochemical Landscapes Project (NASGLP). Results highlight that the proposed methodology provides reliable estimations of the gas permeability and reveal that the presence of water content may cross the boundary between two radon risk categories, and consequently, may change the radon risk category to safer situations.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Insights on Climate-Driven Fluctuations of Cave 222Rn and CO2Concentrations Using Statistical and Wavelet Analyses

  • Pla, Concepción
  • Fernández-Cortés, Ángel
  • Cuezva, Soledad
  • Galiana-Merino, Juan Jose
  • Cañaveras, Juan Carlos
  • Sánchez-Moral, Sergio
  • Benavente, David
This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited., Understanding the fluctuations in cave air concentrations and their climatic control is substantial not only to preserve the quality of indoor atmospheres but also to avoid the risk related to the presence of hazardous substances. In this study, we investigated the most influential factors affecting 222Rn and CO2 concentrations, the nature of their dynamics, and their coupling with climatic variations. For this purpose, we combined a set of mathematical methods that included a statistical and wavelet analysis of a 6-year time series in Rull Cave (Spain). Generally, the 222Rn and CO2 dynamic in cave air showed similar patterns. However, the obtained results show that these gases have a different frequency response. Thus, the annual component of 222Rn and CO2 is controlled by the relationship between external and internal temperatures. At low frequencies, both gases are affected by the same variables when the cave atmosphere reaches a minimum concentration. However, when the cave atmosphere is isolated from the outdoors, 222Rn and CO2 behave differently and disturbance caused by the visitors is evidenced in terms of the CO2 concentration; the latter observation was confirmed by the wavelet analysis at high frequencies. In contrast, the 222Rn concentration shows important variations following rainfall, which was weakly identified in the CO2 concentration., This research was funded by the Spanish Ministry of Science, Innovation and Universities (projects CGL2016-78318-C2-1-R, CGL2016-78318-C2-2-R, and RTI2018-099052-B-I00) and the University of Alicante (project GRE17-12).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Comparative analysis of water condensate porosity using mercuryintrusion porosimetry and nitrogen and water adsorption techniquesin porous building stones

  • Benavente, David
  • Such-Basañez, I.
  • Fernández-Cortés, Ángel
  • Pla, C.
  • Cazorla-Amorós, D.
  • Cañaveras, Juan Carlos
  • Sánchez-Moral, Sergio
Condensate porosity in porous materials has a significant influence on comfort, energy consumption, and material’s strength and durability. The variation of the moisture content of the material for a given variation of relative humidity describes the moisture storage capacity and has to be determined experimentally through the water sorption isotherm. However, the characterisation of sorption isotherm is very time-consuming, mostly for high relative humidity conditions, which may cause experimental errors and reproducibility problems., This paper aims to estimate experimental water condensate porosity using mercury intrusion porosimetry and nitrogen adsorption technique considering pores smaller than 0.1 μm for a wide range of porous sedimentary rock types with different petrographic characteristics. Particularly for nitrogen adsorption characterisation, we interpolated the pore volume using BJH method applied to the desorption branch. In the water adsorption test, condensate porosity is obtained with the maximum adsorbed water at RH = 100%., The ratio between water condensate porosity and total porosity in the studied porous stones is important and varies from 2 to 38%. Nitrogen adsorption technique provides the best estimation of condensate porosity (R2 = 0.979) and an effective estimation of water condensate porosity. The correlation between condensate porosity using MIP is moderate (R2 = 0.892) and presents a wider dispersion for all the range of condensate porosity. A mathematical expression that fits the shape and curvature of the water isotherm was also analysed in terms of pore structure. These studies are scarce for porous stones and our results provide valuable information for these widely used construction and building material., This work was supported by the Spanish Ministry of Science, Innovation and Universities [grant number RTI2018-099052-B-I00] and Regional Governments of Comunidad Valenciana (Spain) [grant number AICO/2020/175] and Madrid (Spain) [Top Heritage, grant number S2018/NMT-4372]., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Global models for 222Rn and CO2 concentrations in the Cave of Altamira

  • Sáez, M.
  • Mangiarotti, S.
  • Cuezva, Soledad
  • Fernández-Cortés, Ángel
  • Molero, B.
  • Sánchez-Moral, Sergio
  • Benavente, David
The purpose of this paper is to model numerically the dynamics of CO and Rn in cave atmospheres, particularly in the noteworthy Cave of Altamira (Spain). We aim to get a better understanding of the nature of these dynamics and their couplings with climatic controls, more specifically the soil water content, which role in the said dynamics poses some questions. For the first time, we apply the global modeling technique in the field of cave microclimate and atmospheric composition. The global modeling technique is a methodology based on the theory of nonlinear systems and designed to extract mathematical models directly from observational time series. We were able to extract four global models from our data. These models represent a step forward from the existent conceptual ones. They also show that CO and Rn dynamics can be approximated by low-dimensional, deterministic systems, which can be chaotic or, at least, close to chaos; this has decisive methodological consequences for future research. Moreover, the global modeling technique was used for the first time in a non-autonomous formulation; this enabled the possibility of studying the influence of the external forcing (soil water content) on the gas concentration in different scenarios., This research was supported by the Spanish Government (grant numbers RTI2018-099052-B-I00 and PID2019-110603RB-I00) and the Regional Government of Comunidad Valenciana, Spain (grant number AICO/2020/175). SM received financial support from the French programs Les Enveloppes Fluides et l’Environnement (CNRS-INSU) and Programme National de Télédétection Spatiale (CNRS). A post-doctoral research fellowship was awarded to S. Cuezva by the University of Almería (Hipatia Programme). A research grant for a doctoral stay was awarded to M. Sáez by the University of Alicante., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Role of subterranean microbiota in the carbon cycle and greenhouse gas dynamics

  • Martín-Pozas, Tamara
  • Cuezva, Soledad
  • Fernández-Cortés, Ángel
  • Cañaveras, Juan Carlos
  • Benavente, David
  • Jurado, Valme
  • Sáiz-Jiménez, Cesáreo
  • Janssens, Ivan
  • Seijas, Naomí
  • Sánchez-Moral, Sergio
Subterranean ecosystems play an active role in the global carbon cycle, yet only a few studies using indirect methods have focused on the role of the cave microbiota in this critical cycle. Here we present pioneering research based on in situ real-time monitoring of CO2 and CH4 diffusive fluxes and concurrent δ13C geochemical tracing in caves, combined with 16S microbiome analysis. Our findings show that cave sediments are promoting continuous CH4 consumption from cave atmosphere, resulting in a significant removal of 65% to 90%. This research reveals the most effective taxa and metabolic pathways in consumption and uptake of greenhouse gases. Methanotrophic bacteria were the most effective group involved in CH4 consumption, namely within the families Methylomonaceae, Methylomirabilaceae and Methylacidiphilaceae. In addition, Crossiella and Nitrosococcaceae wb1-P19 could be one of the main responsible of CO2 uptake, which occurs via the Calvin-Benson-Bassham cycle and reversible hydration of CO2. Thus, syntrophic relationships exist between Crossiella and nitrifying bacteria that capture CO2, consume inorganic N produced by heterotrophic ammonification in the surface of sediments, and induce moonmilk formation. Moonmilk is found as the most evolved phase of the microbial processes in cave sediments that fixes CO2 as calcite and intensifies CH4 oxidation. From an ecological perspective, cave sediments act qualitatively as soils, providing fundamental ecosystem services (e.g. nutrient cycling and carbon sequestration) with direct influence on greenhouse gas emissions., This work was supported by the Spanish Ministry of Science, Innovation through project PID2019-110603RB-I00, MCIN/AEI/FEDER UE/10.13039/501100011033 and with collaboration of projects RTI2018-099052-B-I00 and PID2020-114978GB-I00. This research has also received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 844535 — MIFLUKE., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Prokaryotic communities inhabiting a high-radon subterranean ecosystem (Castañar Cave, Spain): Environmental and substrate-driven controls

  • Martín-Pozas, Tamara
  • Cuezva, Soledad
  • Fernández-Cortés, Ángel
  • Benavente, David
  • Sáiz-Jiménez, Cesáreo
  • Sánchez Moral, Sergio
14 pagínas.- 7 figuras.- 88 referencias.- Supplementary data associated with this article can be found in the online version at doi:10.1016/j.micres.2023.127511, Castañar Cave (Caceres, Spain) is a unique show cave known for its high natural radiation levels. This study presents a comprehensive analysis of its prokaryotic diversity, specifically focusing on investigating the influence of environmental conditions and substrate characteristics on the prokaryotic community structure in the cave sediments. Additionally, the research aims to evaluate the potential impact of human activities on the cave ecosystem. The identification of distinct bioclimatic zones within the cave was made possible through a combination of environmental and microbial monitoring (ATP assays). The results reveal sediment texture as a significant factor, notably affecting the structure, diversity, and phylogenetic variability of the microbial community, including both Bacteria and Archaea. The proportion of clay minerals in sediments plays a crucial role in regulating moisture levels and nutrient availability. These substrate properties collectively exert a significant selective pressure on the structure of prokaryotic communities within cave sediments. The molecular approach shows that heterotrophic bacteria, including those with chitinolytic enzymes, primarily inhabit the cave. Furthermore, chemoautotrophic nitrifiers such as the archaea Nitrososphaeria and the genus Nitrospira, as well as methanotrophic bacteria from the phyla Methylomirabilota, Pseudomonadota, and Verrucomicrobiota, are also present. Remarkably, despite being a show cave, the cave microbiota displays minimal impacts from human activities and the surface ecosystem. Prokaryotic populations exhibit stability in the innermost areas, while the tourist trail area experiences slightly higher biomass increases due to visitor traffic. This suggests that conservation efforts have successfully limited the entry of external nutrients into the innermost cave areas. Additionally, the results suggest that integrating biomarkers like ATP into environmental monitoring can significantly enhance the methods used to study the negative impacts of tourism on cave ecosystems., This research was supported by the Spanish Ministry of Science and Innovation through project PID2019-110603RB-I00 and the collaboration of projects RTI2018-099052-B-I00 and PID2020-114978GB-I00, MCIN/AEI/FEDER/UE/10.13039/501100011033. This is a contribution from CSIC Interdisciplinary Thematic Platform Open Heritage: Research and Society (PTI-PAIS)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Improving uniaxial compressive strength estimation of carbonate sedimentary rocks by combining minimally invasive and non-destructive techniques

  • Benavente, David
  • Fort González, Rafael
  • Gomez-Heras, Miguel
Uniaxial compressive strength (UCS) is the most used parameter to measure rock strength. However, restrictions in sampling large volume of material, the need of very large set of results and onsite characterisation of UCS non-destructively are requirements in many scientific and engineering investigations. The estimation of UCS from a single non-destructive or minimally invasive technique (NDT) may result incomplete because each NDT is sensitive to different compositional and textural factors. This paper combines open porosity, P-wave velocity, Leeb hardness and micro-drilling resistance force to estimate USC for a wide range of carbonate sedimentary rock types with different petrographic characteristics. Results reveal that mineralogical composition significatively affects micro-drilling resistance force profiles and P-wave velocity values, especially for quartz-bearing rocks. In addition, texture controls substantially the reproducibility of tests sensible to rock surface properties, such as Leeb hardness and micro-drilling resistance force. Fifteen simple and multiple expressions for UCS are fitted. Linear expressions have shown better coefficients of determination (R2) than non-linear equations because of the linearity shown by individual parameters. Curve fitting improves as the number of petrophysical parameters increase in the multiple linear regression analysis. The best correlation is found when the equation incorporates all the mechanical parameters obtained non-destructively as well as open porosity (R2 = 0.910). Leeb hardness is always the most significant variable of the fitted regressions and its addition into multiple linear equations causes an increase of R2. Open porosity also improves R2 whereas drilling force and P-wave velocity have a lower statistical weight in the expressions. The UCS estimation from all NDT, without considering open porosity, shows a good correlation (R2 = 0.899), which presents the advantage that they can be obtained non-destructively with portable equipment and can provide a numerous set of results at relatively low cost., This work was supported by the Spanish Government [grant number D. Benavente et al. International Journal of Rock Mechanics and Mining Sciences 147 (2021) 1049158 RTI2018-099052-B-I00] and Regional Government of Madrid (Spain) [Top Heritage, grant number S2018/NMT-4372]., Peer reviewed