Pasar al contenido principal

VECTORES DE ANISOTROPIA AMBIENTAL E INDICES DE RIESGO CLIMATICO DEL PATRIMONIO CULTURAL EN UN CLIMA CAMBIANTE

PID2020-116896RB-C21

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 23
Encontrada(s) 1 página(s)

Docta Complutense
Publicación Artículo científico (JournalArticle)

Characterization of anisotropic saltweathering through nondestructive techniques mapping using a GIS environment

  • Gómez Heras, Miguel
  • López González, Laura
  • Gil Muñoz, María Teresa
  • Cabello Briones, Cristina
  • Benavente, David
  • Martínez Martínez, Javier
Doctrinal texts on architectural heritage conservation emphasize the importance of fully understanding the structural and material characteristics and utilizing information systems. Photogrammetry allows for the generation of detailed, geo-referenced Digital Elevation Models of architectural elements at a low cost, while GIS software enables the addition of layers of material characteristic data to these models, creating different property maps that can be combined through map algebra. This paper presents the results of the mechanical characterization of materials and salt-related decay forms of the polygonal apse of the 13th-century monastery of Santa María de Bonaval (Guadalajara, Spain), which is primarily affected by salt crystallization. Rock strength is estimated using on-site nondestructive testing (ultrasound pulse velocity and Leeb hardness). They are mapped and combined through map algebra to derive a single mechanical soundness index (MSI) to determine whether the decay of the walls could be dependent on the orientation. The presented results show that salt decay in the building is anisotropic, with the south-facing side of the apse displaying an overall lower MSI than the others. The relative overheating of the south-facing side of the apse enhances the effect of salt crystallization, thereby promoting phase transitions between epsomite and hexahydrite.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Estimation of uniaxial compressive strength and intrinsic permeability from ultrasounds in sedimentary stones used as heritage building materials

  • Benavente, David
  • Martínez Martínez, Javier
  • Galiana-Merino, Juan José
  • Pla, Concepción
  • Jongh, Marli de
  • García-Martínez, Noé
  • Benavente, David|||/items/93054314-55c1-4e9f-a84d-f461370acc10
  • Galiana-Merino, Juan José|||/items/2aeffb6f-7a89-465b-a756-a9ca8b74bb42
  • García-Martínez, Noé|||/items/35ea3f49-d77a-4740-8ca5-5bb024c9170c
  • Pla, Concepción|||/items/f9ff3ff5-c55e-4c85-83c1-f71fff810219
This paper combines ultrasonic parameters recorded from P- and S- waves and effective porosity to estimate uniaxial compressive strength, σC, and intrinsic permeability, k - two of the most crucial physical parameters used in stone conservation studies. The ultrasonic parameters have been chosen because they are sensitive to the microstructural properties of stones which influence both σC and k differently. Velocities of compressional or primary, Vp, and shear or secondary, Vs, elastic waves are related to porosity and the mineralogical composition; the waveform attenuation is related to the presence of vuggy macropores and pore and particle size; and the wavelength is related to the pore and particle size. Fifteen types of stones used in the Spanish built heritage were measured including calcarenites, sandstones, dolostones and travertines. Several simple and multiple predictive expressions for σC and k are fitted, which are quantified through the Pearson correlation coefficient, R. Curve fitting improves as the number of petrophysical parameters taken into account in the multiple linear regressions increases. The obtained Pearson's correlations values for σC are slightly higher than for k. The best correlation for σC (R = 0.921) and k (R = 0.903) is found when the predictive equation incorporates all of the elastic wave parameters obtained non-destructively, and the connected porosity. In general, effective porosity is statistically the most significant variable of the fitted regressions. The σC and k estimation from all the ultrasonic parameters, without considering connected porosity, shows a good correlation (R = 0.852 and 0.864, respectively). The addition of Vs to multiple regressions does not significantly improve the goodness of the fit. Consequently, the measurement of Vs is unnecessary as it is difficult and time-consuming. Finally, results also show that vuggy porosity (present in travertines) influences waveform attenuation and σC and k differently, relative to other microstructural properties; limiting the techniques use for stones with this type of porosity. Estimating σC and k using ultrasonic parameters exclusively is advantageous as the estimations can be obtained non-destructively using portable equipment, while also providing an acceptable goodness of fit.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Control of natural fractures in historical quarries via 3D point cloud analysis

  • Riquelme, Adrián
  • Martínez Martínez, Javier
  • Martin-Rojas, Ivan
  • Sarro, Roberto
  • Rabat, Álvaro
  • Martin-Rojas, Ivan|||/items/86714454-f8b8-44f6-b3e8-58bf83b5730c
  • Riquelme, Adrián|||/items/03cd5ff0-7df3-4736-81f3-4d94bd19316a
This paper applies remote sensing techniques and 3D point cloud (3DPC) analysis to the study of historical quarries and the relationship between old quarry landscapes and the natural fracture systems of rock massifs. Ancient quarry landscapes present particular characteristics and different features from those of modern quarries. Consequently, specific considerations are needed when historical extractive places are studied. The proposed method is based on terrestrial 3D laser scanners and the structure from motion technique with remotely piloted aircraft systems. Additional specific fieldwork is required to identify and characterise quarry faces from old, blurry outcrops. A case study of the 18th century “Rambla Honda” quarries in La Romana (Alicante, SE Spain) is presented. The comparison between the fieldwork and 3DPC analysis enables the numbers and orientations of both (1) the discontinuity sets within the rock mass facilitating extraction and (2) the planes resulting from block extraction (traditional quarry faces) to be determined. The comparative analysis reveals how the stonecutters managed the extraction. The results show that structural and stratigraphic discontinuities act as planes of weakness for block extraction and determine the optimum orientation of the quarry face for minimising efforts and rock waste. The final quarry landscape is formed from the superposition of natural and artificial surfaces, but currently they appear eroded and partially covered by silting and plants. The proposed methodology contributes to distinguishing both natural and artificial discontinuities and to achieving a comprehensive knowledge of these cultural places.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

The Role of Calcite Dissolution and Halite Thermal Expansion as Secondary Salt Weathering Mechanisms of Calcite-Bearing Rocks in Marine Environments

  • Martínez Martínez, Javier
  • Arizzi, Anna
  • Benavente, David
  • Benavente, David|||/items/93054314-55c1-4e9f-a84d-f461370acc10
This research focuses on the analysis of the influence of two secondary salt weathering processes on the durability of rocks exposed to marine environments: chemical dissolution of rock forming minerals and differential thermal expansion between halite and the hosting rock. These processes are scarcely treated in research compared to salt crystallisation. The methodology followed in this paper includes both in situ rock weathering monitoring and laboratory simulations. Four different calcite-bearing rocks (a marble, a microcrystalline limestone and two different calcarenites) were exposed during a year to a marine semiarid environment. Exposed samples show grain detachment, crystal edge corrosion, halite efflorescences and microfissuring. Crystal edge corrosion was also observed after the laboratory simulation during a brine immersion test. Calcite chemical dissolution causes a negligible porosity increase in all the studied rocks, but a significant modification of their pore size distribution. Laboratory simulations also demonstrate the deterioration of salt-saturated rocks during thermal cycles in climatic cabinet. Sharp differences between the linear thermal expansion of both a pure halite crystal and the different studied rocks justify the registered weight loss during the thermal cycles. The feedback between the chemical dissolution and differential thermal expansion, and the salt crystallisation of halite, contribute actively to the rock decay in marine environments.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Multiproxy Petrological Analysis for Provenance Determination of Two Granitic Stone Anchors in the Western Mediterranean

  • Martínez-Martínez, Javier
  • Corbí, Hugo
  • Fusi, Nicoletta
  • Molina Vidal, Jaime
  • Moya, José A.
  • Lorrio Alvarado, Alberto José
  • Lozano Quijada, Carlos
  • Pérez Burgos, José Manuel
  • Corbí, Hugo|||/items/6b9064af-de45-4355-8ece-2ad15bdb692b
  • Lorrio Alvarado, Alberto José|||/items/bd120cdc-b227-4301-a053-f3b1f723315e
  • Molina Vidal, Jaime|||/items/fe5c9fb1-bcda-465e-ae8a-b9c0d664b400
  • Moya, José A.|||/items/4e5b1032-b616-4fa4-bc6f-fb810720f443
A multiproxy methodology has been employed to characterise two granite anchors discovered on the seabed near the island of Nueva Tabarca (Alicante, Southeast Spain). According to the significant archaeological context where they were found, the studied anchors can be dated from the Roman ages (late Republican period). One of the most interesting aspects is the absence of regional geological outcrops with rocks compatible with the granite used in the production of the anchor, which shows a foreign origin consistent with the connection of the anchor to maritime transport across the Mediterranean Sea. The lack of precise information about the artifact’s origin underscores the interest and need for the application of petrological techniques to determine its provenance. The methodology utilised encompasses five distinct techniques: (1) non-destructive textural analysis using X-ray microcomputed tomography; (2) K–Ar dating; (3) petrological characterisation through optical microscopy; (4) geochemical characterisation using X-ray fluorescence and atomic absorption spectrometry. The results allow for a comparison of the anchor rock’s characteristics with various granite outcrops along the Mediterranean coasts (Eastern, Central, and Western sectors), suggesting potential source areas based on petrological compatibility with the material under study. The findings point to the origin of the Nueva Tabarca granite anchor being granite outcrops in Southern Italy (Calabria), reinforcing the connection between the Spanish southeastern coasts and Southern Italy. These results highlight the utility and significance of multiproxy petrological methodologies in the geoarchaeological study of decontextualised artifacts.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Erosion anisotropy analysis of construction materials as a key tool for strengthening preventive conservation strategies in built heritage

  • Martínez Martínez, Javier
  • Benavente, David
  • Rocca, Riccardo
  • Ríos Murillo, Asunción de los
  • Gómez Heras, Miguel
  • Benavente, David|||/items/93054314-55c1-4e9f-a84d-f461370acc10
In this paper, we present an innovative Erosion Anisotropy Analysis as a pioneering tool to discern the most harmful hydrometerological agents and their predominant directions of impact on built heritage. The proposed Erosion Anisotropy Analysis includes: 1) the analysis of weathering, bio-weathering and erosion processes affecting the building materials; 2) analysis of climatic series identifying preferential directionality of hydrometeorological agents; 3) erosion quantification using photogrammetric models; and 4) comparative analysis between both erosion and climatic anisotropy models. The proposed analysis is applied to the Cerrillos Tower (Almería, Spain), which is considered a paradigmatic case study due to their location and exposure conditions. Results determinate the primary vulnerability directions against hydrometeorological agents (N200–330°E) and highlight solar radiation, wind and wind-driven rain as the most damaging factors. Moreover, the Erosion Anisotropy Analysis describes the erosion patterns developed as well as their anisotropic distribution in the Tower. The proposed methodology is a benchmark for designing and dimensioning effective preventive measures to mitigate their impact under current climatic conditions as well as to prevent future scenarios within the global framework of climate change.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Characterization of Anisotropic Salt Weathering through Nondestructive Techniques Mapping Using a GIS Environment

  • Gómez Heras, Miguel
  • López-González, Laura
  • Gil-Muñoz, María Teresa
  • Cabello-Briones, Cristina
  • Benavente, David
  • Martínez Martínez, Javier
  • Benavente, David|||/items/93054314-55c1-4e9f-a84d-f461370acc10
Doctrinal texts on architectural heritage conservation emphasize the importance of fully understanding the structural and material characteristics and utilizing information systems. Photogrammetry allows for the generation of detailed, geo-referenced Digital Elevation Models of architectural elements at a low cost, while GIS software enables the addition of layers of material characteristic data to these models, creating different property maps that can be combined through map algebra. This paper presents the results of the mechanical characterization of materials and salt-related decay forms of the polygonal apse of the 13th-century monastery of Santa María de Bonaval (Guadalajara, Spain), which is primarily affected by salt crystallization. Rock strength is estimated using on-site nondestructive testing (ultrasound pulse velocity and Leeb hardness). They are mapped and combined through map algebra to derive a single mechanical soundness index (MSI) to determine whether the decay of the walls could be dependent on the orientation. The presented results show that salt decay in the building is anisotropic, with the south-facing side of the apse displaying an overall lower MSI than the others. The relative overheating of the south-facing side of the apse enhances the effect of salt crystallization, thereby promoting phase transitions between epsomite and hexahydrite.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Erosion directionality and seasonality study using the anisotropy matrix: application in a semiarid Mediterranean climate (SE Spain)

  • Martínez-Martínez, Javier
  • Abellán, A.
  • Berrezueta Alvarado, Edgar Raúl
14 p., [EN] This paper is based on the fact that some climatic variables show a preferential directionality and grant a markedly anisotropic character to the weathering system acting on rocks. The aim of this work is to quantify the anisotropic degree of the weathering system and its effects on rock erosion. For this purpose, a new methodology based on the vector analysis of directional and time-dependent parameters is proposed to quantify the annual or seasonal anisotropy of the weathering system. Results show that, on the one hand, wind-driven rain and solar radiation are the most anisotropic variables, being north and east the most intense directions for wind-driven rain and southeast for solar radiation, in the case of the San José Tower, the reference monument of this study. On the other hand, the ranking from the most to the least eroded façades of the tower are: east (maximum recession depth of 26.77 mm) > south (15.53 mm) ≈ west (13.56 mm) > north (6.37 mm). Solar radiation and indirect processes arising therefrom are the most important weathering agents in the semiarid Mediterranean climate, whilst wind-driven rain is the main erosion factor especially due to its torrential character. According to our results, weathering and erosion agents are strongly anisotropic, which emphasizes the importance of integrating the anisotropic character of the weathering system in preventive strategies against surface deterioration of monuments. In this sense, this paper advances the United Nations’ 2030 Agenda for Sustainable Development., This research was supported by the Spanish Government (MICINN) (PID2020-116896RB-C21 and PID2020-116896RB-C22)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Aspect influence on the weathering micro-rates of limestones exposed under semiarid coastal Mediterranean climate

  • Martínez-Martínez, Javier
  • Berrezueta Alvarado, Edgar Raúl
  • Aguilera Alonso, Héctor
  • Fusi, Nicoletta Chiara
[EN] A novel methodology is presented for measuring weathering microrates after one-year of direct exposure of rocks to environment. The study focuses on building materials used in the cultural heritage exposed to semiarid coastal Mediterranean climate (SE Spain). Three different carbonate rocks, with significant differences in porosity and texture, were studied in two different exposition orientations (north and south). Results are interpreted according to local microenvironmental conditions and petrologic aspects (porosity, pore size distribution and mineralogy). South-facing rock blocks show the highest weathering microrates (9130 mm/ky and 18750 mm/ky for fine and coarse-grained porous limestones, respectively). They are 1.55 and 1.92 times higher than rates obtained in north-facing rock samples. Physical and chemical decay mechanisms overlap in the weathering process. On the one hand, physical processes are more evident in porous limestones, being predominant in south exposure samples. On the other hand, chemical corrosion is the main weathering mechanism in massive limestones as well as in porous limestones with unstable components. Dissolution prevails in northern exposure. Obtained weathering rates are two to three magnitude orders higher than the erosion rates measured in the same rocks, highlighting the conceptual differences between both parameters., This work was supported by the Spanish Ministry of Science and Innovation (MCIN) [grant numbers PID2020-116896RB-C21 and PID2020-116896RB-C22 funded by MCIN/AEI/ 10.13039/501100011033]., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Comparative analysis of the current uneven situation of historical quarries associated with the UNESCO world heritage sites in Spain

  • Navarro Domínguez, Rafael
  • Martínez-Martínez, Javier
  • Fernández Suárez, Jorge
  • Álvarez Areces, Enrique
  • Baltuille Martín, José Manuel
[EN] Spain is one of the most prominent countries regarding UNESCO World Heritage Sites (WHS), most of which were selected to preserve unique architectonical ensembles. These sites are usually characterized by the extensive use of stone as building material, which has a dominant influence on their overall appearance and value. This paper provides an overview of the general state of the building stones and the historical source quarries associated with UNESCO WHS in Spain. Ten Spanish UNESCO WHS were selected for the study. The analysis considered two main perspectives: 1) the scientific knowledge about building stones and historical quarries; 2) their conservation state, administrative situation, and social value. The case studies revealed a highly uneven degree of knowledge of the building stones and, especially, of the quarries. The lack of specific protection, touristic promotion or outreach activities is another issue that affects historical quarries, due to low political interest, in most cases. Some key elements to guarantee the conservation of historical quarries as part of the UNESCO WHS are: administrative protection that guarantees preservation particularly of the quarry landscape, awareness about the conservation of historic faces by mining companies, reopening historical quarries for restoration of monuments, limiting the maximum extraction volume, promoting scientific studies and enhancing social perception and tourism., The University of Salamanca is acknowledged for its funding support to the Research Group CHARROCK. This research has been supported by the European project Eurolithos (GeoE.171.017 founded by the ERA-NET Cofund action 731166); the Spanish Government (Grants PID 2020-116896RB-C21 and PID 2020-116896RB-C22 funded by MCIN/AEI/10.13039/501100011033) and Regional Government of Andalucía (Spain) (INCHAPA project; IGME-Junta de Andalucía covenant)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Directional analysis of the variation of the weathering (micro)rate in calcarenites exposed to coastal semiarid climate, Cálculo de la (micro)tasa de alteración en calcarenitas expuestas en clima semiárido costero

  • Martínez-Martínez, Javier
  • Berrezueta Alvarado, Edgar Raúl
  • Aguilera Alonso, Héctor
  • Fusi, Nicoletta Chiara
  • Gómez-Heras, Miguel
[EN] This paper proposes a new methodology to calculate weathering rates of rocks after brief periods of direct exposure to the environment. The methodology bases on X-Ray microtomography and Digital Image Analysis. Two porous carbonate rocks have been studied: a calcarenite and a calcirrudite with an average porosity of 20%. They were exposed for one year to a coastal semiarid Mediterranean climate (Nueva Tabarca, Alicante; SE of Spain). The obtained microrates indicate a higher weathering rate in calcirrudite (18.75 mm/year) than in calcarenite (9.13 mm/year). This variation is justified by the differences in the porous system of each rock and its influence on the effectiveness of the usual alteration processes acting on rocks exposed to coastal semiarid climates. In addition, obtained results validate the proposed methodology, which constitutes an important advance in the study of the weathering rates of materials. It allows a quick and quantitative way to analyse the vulnerability of rocks to specific exposure environments., [ES] En este trabajo se propone una nueva metodología, basada en microtomografía de Rayos X y Análisis Digital de Imagen, para el cálculo de tasas de alteración de rocas a partir de breves periodos de exposición directa al ambiente. Se han estudiado dos rocas carbonatadas porosas (una calcarenita y una calcirrudita con porosidad media del 20%), expuestas durante un año a un clima Mediterráneo semiárido costero (Nueva Tabarca, Alicante). Las microtasas obtenidas indican una mayor velocidad de alteración en la calcirrudita (18.75 mm/ año) que en la calcarenita (9.13 mm/año). Esta variación se justifica por las diferencias en el sistema poroso de cada roca y su influencia en la efectividad de los procesos de alteración habituales en climas semiáridos costeros. Además, los resultados obtenidos validan la metodología planteada, la cual constituye un importante avance en el estudio de la velocidad de deterioro de materiales, permitiendo de una forma rápida y cuantitativa, analizar la vulnerabilidad de las rocas a determinados ambientes de exposición., Esta publicación es parte de los proyectos de I+D+i PID2020-116896RB-C21 y PID2020-116896RB-C22, financiados por MCIN/AEI/10.13039/501100011033 (Ministerio de Ciencia e Innovación)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sediment Response after Wildfires in Mountain Streams and Their Effects on Cultural Heritage: the Case of the 2021 Navalacruz Wildfire (Avila, Spain)

  • Ortega-Becerril, Jose A.
  • Suárez, Clara
  • Vázquez Tarrío, Daniel
  • Garrote, Julio
  • Gómez-Heras, Miguel
[EN] The 2021 Navalacruz wildfire occurred in a mountainous area in the Sistema Central (Spain). Despite having an average low severity index (dNBR), the loss of vegetation cover associated with the fire was responsible for a high rate of sedimentation in the rivers and streams. Additionally, the burned area affected up to 60 cultural heritage sites, including archaeological and ethnological sites, and damage ranged from burnt pieces of wood to the burial of archaeological sites. In the present work, we document and analyze the post-fire evolution in several rivers and streams. This is based on a field survey of infiltration rates, hydrodynamic modeling, and the study of channel morphological changes. Our analysis revealed how the first post-fire rains caused the mobilization and transport of ashes. This created hydrophobicity in the soils, resulting in large amounts of materials being transported to rivers and streams by subsequent medium- and low-magnitude storms. A hydrological and hydraulic model of the study catchments under pre- and post-fire conditions suggests that these trends are a consequence of a post-fire increase in flow rates for similar rainfall scenarios. In this respect, our estimates point at a significant increase in sediment transport capacities associated with this post-fire increase in flow rates. The combination of locally steep slopes with high-severity fire patches, and a considerable regolith (derived from pre-fire weathering), resulted in a series of cascading responses, such as an exacerbated supply of sand to the drainage network and the triggering of debris flows, followed by erosion and entrenchment., This research was funded by MCIN/AEI/10.13039/501100011033, grant numbers PID2020-116896RB-C21 and PID2020-116896RBC22, provided by MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Surface Mechanical Effects of Wildfires on Rocks in Climbing Areas

  • Yeste Lizán, Pablo
  • Gómez-Heras, Miguel
  • García Rodríguez, Manuel
  • Pérez López, Raúl
  • Carcavilla Urquí, Luis
  • Ortega-Becerril, Jose A.
[EN] Wildfires are widely recognized as a cause of mechanical damage to rocks. Nevertheless, previous research has neglected how wildfires might impact sport climbing areas. In Spain, two large wildfires affected two climbing areas between 2020 and 2021. This paper addresses the rock mechanical effects of wildfires that could lead to safety issues, such as rock falls, climbing hold deterioration, and climbing anchor damage. In this study, the Non-Destructive Techniques (NDTs) of Ultrasonic Pulse Velocity (UPV) and Schmidt Hammer (SH) were used, and two types of measurements were carried out: randomized grid measurements and measurements along the climbing routes. Two phenomena were recognized: (a) thermal breakdown and (b) mineralogical changes. The results of using the SH show a relationship between the decrease in the rebound value and the observed mechanical damage. Field observations showed mechanical weathering, such as cracking, spalling, granular disaggregation, and thermochemical weathering with different temperature thresholds. Observed thermochemical reactions included reddening, CaCO3 calcination, rock decomposition, and quartz cracking. The set of changes involves a major rock outcrop transformation and an acceleration of fire-induced weathering processes. Both areas exhibited more effects at the bottom of the wall. Furthermore, in this paper, we explore how iconic climbing routes can be considered a form of cultural heritage and the consequences of their loss., This research was funded by the Top Heritage (P2018/NMT-4372) program from the Regional Government of Madrid (Spain) and Grants PIC2020-116896RB-C21, PIC2020-116896RBC22, and PID2020-113407RB-I00 funded by MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Characterization of Anisotropic Salt Weathering through Nondestructive Techniques Mapping Using a GIS Environment

  • Gómez-Heras, Miguel
  • López-González, Laura
  • Gil-Muñoz, María Teresa
  • Cabello-Briones, Cristina
  • Benavente, David
  • Martínez-Martínez, Javier
Doctrinal texts on architectural heritage conservation emphasize the importance of fully understanding the structural and material characteristics and utilizing information systems. Photogrammetry allows for the generation of detailed, geo-referenced Digital Elevation Models of architectural elements at a low cost, while GIS software enables the addition of layers of material characteristic data to these models, creating different property maps that can be combined through map algebra. This paper presents the results of the mechanical characterization of materials and salt-related decay forms of the polygonal apse of the 13th-century monastery of Santa María de Bonaval (Guadalajara, Spain), which is primarily affected by salt crystallization. Rock strength is estimated using on-site nondestructive testing (ultrasound pulse velocity and Leeb hardness). They are mapped and combined through map algebra to derive a single mechanical soundness index (MSI) to determine whether the decay of the walls could be dependent on the orientation. The presented results show that salt decay in the building is anisotropic, with the south-facing side of the apse displaying an overall lower MSI than the others. The relative overheating of the south-facing side of the apse enhances the effect of salt crystallization, thereby promoting phase transitions between epsomite and hexahydrite., This research was funded by MCIN/AEI/10.13039/501100011033, grant numbers PID2020-116896RB-C21 and PID2020-116896RBC22., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Erosion anisotropy analysis of construction materials as a key tool for strengthening preventive conservation strategies in built heritage

  • Martínez-Martínez, Javier
  • Benavente, David
  • Rocca, R.
  • Ríos, Asunción de los
  • Gómez-Heras, Miguel
[EN] In this paper, we present an innovative Erosion Anisotropy Analysis as a pioneering tool to discern the most harmful hydrometerological agents and their predominant directions of impact on built heritage. The proposed Erosion Anisotropy Analysis includes: 1) the analysis of weathering, bio-weathering and erosion processes affecting the building materials; 2) analysis of climatic series identifying preferential directionality of hydrometeorological agents; 3) erosion quantification using photogrammetric models; and 4) comparative analysis between both erosion and climatic anisotropy models. The proposed analysis is applied to the Cerrillos Tower (Almería, Spain), which is considered a paradigmatic case study due to their location and exposure conditions. Results determinate the primary vulnerability directions against hydrometeorological agents (N200–330°E) and highlight solar radiation, wind and wind-driven rain as the most damaging factors. Moreover, the Erosion Anisotropy Analysis describes the erosion patterns developed as well as their anisotropic distribution in the Tower. The proposed methodology is a benchmark for designing and dimensioning effective preventive measures to mitigate their impact under current climatic conditions as well as to prevent future scenarios within the global framework of climate change., This work was supported by the Spanish Ministry of Science and Innovation (MCIN) [grant numbers PID2020-116896RB-C21 and PID2020-116896RB-C22 funded by MCIN/AEI/ 10.13039/501100011033]., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Environmental Controls on Stone Erosion Rates in Monuments Affected by Salt Crystallization

  • Sanz Martínez, David
  • Torrero, Enrique
  • Dountcheva, I.
  • Castilla Pascual, Francisco
  • Martínez-Martínez, Javier
[EN] This study focuses on quantifying the erosion rate of building stones from Jamete's Arch in the Cathedral of Santa María in Cuenca, considered one of the most iconic works of the Spanish Renaissance. This monument exhibits severe deterioration due to salt crystallization, a common and highly aggressive process affecting architectural heritage worldwide. The intensity of erosion is largely influenced by the environmental exposure conditions of the cathedral´s interior microclimate. The innovative methodology proposed in this research combines various elements, which include: a comprehensive characterization of the efflorescence, along with the petrological and petrophysical properties of the stone; continuous monitoring over one year of the environmental exposure (temperature and relative humidity) and direct measurement of the erosion rate experienced by the monument's stones. The results reveal that the critical deterioration of the stones is primarily driven by phase transitions of magnesium sulfate, which crystallizes within the stones’ porous system. The highest erosion rates are concentrated at the end of summer and throughout autumn, coinciding with the greatest number of phase transitions between epsomite, hexahydrite, and kieserite. These phase changes generate crystallization pressures that exceed the mechanical strength of the stone. The methodology employed in this study suggests the implementation of a controlled system for the preventive conservation of the monument. This system focusses on environmental control with temperature and relative humidity monitoring to regulate interior microclimate conditions and reduce/eliminate the cycles of salt dissolution and crystallization. Such a system would minimize stone deterioration and significantly reduce the need for costly restoration interventions., This work was supported by the Spanish Ministry of Science and Innovation (MCIN): grant number PID2020-116896RB-C21 funded by MCIN/AEI/https://doi.org/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multiproxy Petrological Analysis for Provenance Determination of Two Granitic Stone Anchors in the Western Mediterranean

  • Martínez-Martínez, Javier
  • Corbí, Hugo
  • Fusi, Nicoletta Chiara
  • Molina Vidal, Jaime
  • Moya-Montoya, José A.
  • Lorrio Alvarado, Alberto J.
  • Lozano Quijada, Felio
  • Pérez Burgos, José Manuel
16 p. - El artículo forma parte del número especial "Characterization and Provenance Analysis of Ancient Stone Materials: Insights from Mineralogy, Petrology and Geochemistry"., [EN] A multiproxy methodology has been employed to characterise two granite anchors discovered on the seabed near the island of Nueva Tabarca (Alicante, Southeast Spain). According to the significant archaeological context where they were found, the studied anchors can be dated from the Roman ages (late Republican period). One of the most interesting aspects is the absence of regional geological outcrops with rocks compatible with the granite used in the production of the anchor, which shows a foreign origin consistent with the connection of the anchor to maritime transport across the Mediterranean Sea. The lack of precise information about the artifact’s origin underscores the interest and need for the application of petrological techniques to determine its provenance. The methodology utilised encompasses five distinct techniques: (1) non-destructive textural analysis using X-ray microcomputed tomography; (2) K–Ar dating; (3) petrological characterisation through optical microscopy; (4) geochemical characterisation using X-ray fluorescence and atomic absorption spectrometry. The results allow for a comparison of the anchor rock’s characteristics with various granite outcrops along the Mediterranean coasts (Eastern, Central, and Western sectors), suggesting potential source areas based on petrological compatibility with the material under study. The findings point to the origin of the Nueva Tabarca granite anchor being granite outcrops in Southern Italy (Calabria), reinforcing the connection between the Spanish southeastern coasts and Southern Italy. These results highlight the utility and significance of multiproxy petrological methodologies in the geoarchaeological study of decontextualised artifacts., This work was supported by the Spanish Ministry of Science and Innovation (MCIN) [grant numbers PID2020-116896RB-C21 and PID2020-116896RB-C22 funded by MCIN/AEI/10.13039/501100011033]., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bioreceptivity of sound and weathered building stones: Effects of accelerated ageing on microbial growth

  • Cubero, Beatriz
  • Gutiérrez Patricio, S.
  • Ríos, Asunción de los
  • Gómez-Heras, Miguel
  • Martínez-Martínez, Javier
  • Miller, A. Z.
15 p., [EN] The primary and secondary bioreceptivity of stone materials provide crucial insights into their susceptibility to biological colonization and biodeterioration, which is particularly relevant in the preservation of cultural heritage. This study investigates the bioreceptivity of five lithotypes (three porous limestones, a marble, and a sandstone) commonly used in both historic and modern architecture. Primary bioreceptivity, mainly influenced by the intrinsic properties of the stones, was assessed by inoculating sound (untreated) stone samples with a multi-species phototrophic culture derived from a natural biofilm and incubated under laboratory conditions for 1 month. Secondary bioreceptivity was evaluated on stone samples subjected to accelerated weathering processes, including salt crystallization, freeze-thaw cycling, and chemical attack. These accelerated ageing tests were conducted to induce controlled surface modifications (e.g., increased porosity, roughness, or microcracking) and assess the material’s susceptibility to microbial colonization under altered substrate conditions. Surface coverage areas by biofilms and chlorophyll a content were used as proxies for determining photosynthetic biomass, providing a comprehensive understanding of biofilm growth. The results from the sound and weathered stone surfaces showed a strong correlation between the degree of microbial colonization and stone properties such as porosity and surface roughness, with limestone lithotypes exhibiting the highest bioreceptivity. Weathering processes contributed notably to secondary bioreceptivity, with salt crystallization increasing biofilm development, while freeze-thaw cycling reduced biofilm growth. The novelty of this study lies in evaluating how accelerated weathering tests alter stone bioreceptivity, revealing significant implications for cultural heritage conservation strategies under changing environmental conditions., This work was supported by the Spanish Ministry of Science, Innovation and Universities through grant numbers PID2020–116896RB-C21, PID2020–116896RB-C22, and TED2021–130683B-C22 funded by MCIN/AEI/ 10.13039/501100011033. We acknowledge the financial support from the Spanish National Research Council (CSIC) through the intramural project PIE_20214AT021. The MICROLAVA project (Proyexcel_00185), funded by the Andalusian Regional Government, is also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Análisis del riesgo de crioclastia en España: situación actual y tendencia futura, Risk analysis of cryoclastic weathering in Spain: current situation and future trend

  • Morales Rodríguez, Carlos G.
  • Ortega Villazán, T.
  • Martínez-Martínez, Javier
[EN] This study analyzes the variability of cryoclastic weathering risk in Spain, establishing the context for research focused on the deterioration and erosion of rocks and building materials due to freeze-thaw processes in cold climates. The results are derived from the analysis of climate series from 84 meteorological stations of the AE-MET (State Meteorological Agency) network over the last 30 years. The intensity of cryoclastic weathering is quantified using different parameters based on the number of times per year that the daily minimum temperature exceeds a defined threshold. The results show that, in general terms, freeze-thaw transitions are more frequent in mountain areas and in the interior of the northern half of the Iberian Peninsula, reaching more than 100 transitions per year. Their incidence is minimal in both oceanic climate regions and coastal Mediterranean and semi-arid areas. The geographical distribution of cryoclastic weathering risk may vary slightly depending on the parameter considered. The temporal evolution of this risk is also addressed by analyzing the trend of each parameter. Although the general trend in Spain indicates a decrease in the number of annual freeze-thaw transitions, some regions show positive trends, suggesting an increasing risk of cryoclastic weathering., [ES] Este trabajo analiza la variabilidad del riesgo de crioclastia en España, estableciendo el contexto para estudios centrados en el deterioro y erosión de rocas y materiales de construcción por procesos de hielo/deshielo en climas fríos. Los resultados se obtienen a partir del análisis de las series climáticas de 84 estaciones meteorológicas de la red AEMET durante los últimos 30 años. La intensidad de la crioclastia se cuantifica a través de diferentes parámetros basados en el número de veces al año que la temperatura mínima diaria alcanza un umbral fijado. Los resultados muestran que, en términos generales, las transiciones hielo/deshielo son más frecuentes en áreas de montaña y en el interior de la mitad norte peninsular, llegando a superar más de 100 transiciones anuales. Su incidencia es mínima tanto en regiones de clima oceánico, como en áreas de clima mediterráneo litoral y semiárido. La distribución geográfica del riesgo por crioclastia puede variar ligeramente según el parámetro considerado. También se aborda la evolución temporal del riesgo de crioclastia, analizando la tendencia de cada parámetro. Aunque la tendencia general en España es hacia la disminución del número de transiciones hielo/deshielo anuales, en algunas regiones se registran tendencias positivas, indicando un incremento del riesgo de crioclastia., Esta publicación es parte de los proyectos de I+D+i PID2020-116896RB-C21 y PID2020-116896RB-C22, financiados por MCIN/AEI/10.13039/501100011033 (Ministerio de Ciencia e Innovación); y por el proyecto TEC-Heritage (TEC-2024/TEC 39) financiado por la Comunidad de Madrid (Programas de I+D en Tecnologías)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Contextualization and Heritage Enhancement of the Historical Quarries of the Colored Limestones of Espejón (Soria, Spain)

  • Martínez-Martínez, Javier
  • García Entero, Virginia
  • Mediato Arribas, José Francisco
  • Lozano Otero, Gonzalo
  • Gutiérrez García, Anna
12 p., [EN] The Jurassic colored limestones (yellow-purple) exploited in Espejón (Soria) have been a building material of recognized prestige and great appreciation through time. In particular, two main periods in its exploitation and use are recognized: Roman times − 1st to 5th century AD- (attested, for example, in the cities of Segobriga, Clunia, Complutum, and in villae of Carranque or La Olmeda) and the Renaissance-Baroque period (15th – 18th centuries) (in civil and religious buildings, such as the palace of the Counts of Miranda in Peñaranda de Duero, the Cathedral of Toledo, the monastery of the Descalzas Reales or in the Basilica of the Monasterio de El Escorial). However, from the 18th century and especially in the 19th century, the exploitation of these colored limestones declined, and the quarries became abandoned and forgotten in the 20th century. The objective of this work is to locate and compile the main preserved quarry fronts, analyzing the exploitation system and the associated quarry landscape, contextualizing them in the geological and historical-cultural heritages. In general terms, the yellow and purple limestones of Espejón (Jurassic-Dogger) were exploited in stratified banks with moderate-high dips, using the bar-lever system to detach the blocks, their sliding down the slope and a first block squaring in places close to the fronts. Of these original cultural landscapes, in the best of cases, only a few fronts with scars from block removal, extraction routes and a few abandoned blocks are barely preserved. Waste dumps are the greatest exponent that reflects the intense extractive activity that these quarries accumulated over time., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This work has been supported by Project “Caracterización arqueométrica de las calizas y conglomerados de Espejón, Espeja de San Marcelino y Cantalucia (Soria) y su utilización desde el siglo I al XVI. La aplicación de métodos físico-químicos y técnicas no destructivas para la determinación de la procedencia de los marmora y “jaspes” desde la Antigüedad (2022–2024) (funded by the PALARQ Foundation) and projects “Arqueología e Historia de un paisaje de la piedra: la explotación del marmor de Espejón (Soria) y las formas de ocupación de su territorio desde la Antigüedad al siglo XX” (PGC2018-096854-B-I00) (2019–2022) (funded by MICINU/AEI/FEDER, EU) and PID2020-116896RB-C21 (funded by MCIN/AEI/https://doi.org/10.13039/501100011033) and contract B2023/012871 (Consejería de cultura, turismo y Deporte - Junta de Castilla y León)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influencia del grado de saturación de agua en el deterioro de rocas y morteros por hielo-deshielo, Influence of the degree of water saturation on the deterioration of rocks and mortars by freeze-thaw

  • Vías Varela, Sky
  • Arizzi, Anna
  • Martínez-Martínez, Javier
[EN] This study analyzes the influence of the saturation mechanism on the type and intensity of the deterioration experienced by natural and artificial stone materials during freeze-thaw testing. Two saturation methods are considered: immersion at atmospheric pressure (based on the UNE-EN 12371:2011 standard) and capillary absorption (a proposed methodological modification). This modification aims to bring the accelerated laboratory test closer to the natural conditions to which stone materials are exposed in architectural heritage, where capillary water uptake is a more common mechanism than free immersion. Seven different lithotypes were tested. The results show greater deterioration when materials are saturated by free immersion at atmospheric pressure, indicating a potential overestimation of real freeze-thaw damage in building materials. Additionally, differences in deterioration patterns were observed depending on the saturation mechanism, with the lime mortar being the most vulnerable among the studied materials. The varying petrophysical responses among materials highlight the need to adapt the test protocol to the intrinsic properties of the material under study., [ES] En el presente trabajo se analiza la influencia del mecanismo de saturación en el tipo e intensidad del deterioro sufrido por materiales pétreos naturales y artificiales durante el ensayo de hielo-deshielo. Se consideran dos mecanismos de saturación: inmersión a presión atmosférica (fundamentado en la norma UNE-EN 12371:2011) y absorción capilar (modificación metodológica propuesta). Esta modificación persigue aproximar el ensayo acelerado en laboratorio a las condiciones naturales a las que se encuentran expuestos los materiales pétreos del patrimonio arquitectónico en los que la saturación capilares un mecanismo de absorción de agua más frecuente que la inmersión libre. Se han ensayado siete litotipos diferentes. Los resultados muestran un mayor deterioro cuando los materiales se saturan por inmersión libre a presión atmosférica, indicando una sobreestimación del daño por hielo-deshielo real en los materiales de construcción. Además, se observan diferencias en el patrón de deterioro según el mecanismo de saturación, siendo el mortero de cal el más vulnerable entre los materiales estudiados. Los diferentes resultados petrofísicos entre materiales ponen de manifiesto que el ensayo debe adaptarse a las propiedades intrínsecas del material analizado., Esta publicación es parte de los proyectos de I+D+i PID2020-116896RB-C21 y PID2020-116896RB-C22, financiados por MCIN/AEI/10.13039/501100011033 (Ministerio de Ciencia e Innovación); por el proyecto TEC-Heritage (TEC-2024/TEC 39) financiado por la Comunidad de Madrid (Programas de I+D en Tecnologías); y por los proyectos PID2020-119838RA-100 (2021-2024) y PID2023-146405OB-100 (2024-2027) financiados por MICIU/AEI/10.13039/501100011033 y FEDER (UE)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

The Use of Magnetic Susceptibility as a Technique to Measure the Impact of Wildfires on Archaeological Heritage

  • Sánchez-Roda, Alejandra
  • Oliva Urcia, Belén
  • Gomez-Heras, Miguel
Wildfires are one of the main threats of natural areas and often fires can affect protected or heritage areas and properties, in which the preservation requirements demand the use of non-destructive techniques (NDTs). The magnetic susceptibility is an NDT that provides information on the mineralogical composition of the materials but has never been applied to the evaluation of fires. Here, we combine laboratory with field analysis to test the applicability of the magnetic susceptibility for the assessment of the impacts of wildfires. The laboratory results showed an increase in the magnetic susceptibility with the temperature, more evident in the samples heated to 600 °C and above. The in situ measures revealed a spatial variation in the magnetic susceptibility, which was related to the behaviour of the fire in the area. The samples were later analysed with other magnetic destructive techniques that were used to confirm the mineralogical processes that occurred in the materials. The increase in the susceptibility values were due to the formation of iron oxides. The destructive analysis also showed the presence of minerals such as hematite and magnetite in the samples. Overall, the study allowed a first approach to test the magnetic susceptibility as a simple and fast way to measure the impacts of wildfires.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Reducción de la resistencia por aumento de la temperatura en una granodiorita de una zona arqueológica afectada por incendios

  • Sanchez-Roda, Alejandra
  • Gomez-Heras, Miguel
  • Oliva-Urcia, Belén
Los incendios suponen una de las mayores causas de destrucción del Patrimonio Natural y Cultural. El aumento brusco de temperatura durante un incendio provoca la reducción de la resistencia mecánica de las rocas. El presente trabajo evalúa los efectos mecánicos generados por las altas temperaturas en una granodiorita relacionada con el yacimiento arqueológico de El Berrueco (Ávila – Salamanca). Los resultados muestran un descenso en las propiedades mecánicas del material, que es menor hasta 400oC y catastrófico y penetrativo a partir de 600oC.