Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Modeling ulvan depolymerization by a sequential ultrasound-redox process for controlled low-molar-mass production

  • Santos Herranz, Víctor de
  • Baltrusch Montero, Kai Lois
  • Torres Pérez, María Dolores
  • Domínguez González, Herminia
Ulvan, a sulfated polysaccharide derived from green macroalgae, exhibits promising biological and functional properties. However, its high molar mass limits its applicability. This study develops a kinetic model describing ulvan depolymerization using sequential ultrasonication (US) and hydrogen peroxide-ascorbic acid (H2O2/AH2) redox treatment and evaluates the influence of key operational variables on apparent weight-average molar mass (Mw) reduction. US depolymerization followed a one-phase exponential decay model, rapidly decreasing Mw, achieving a 50% reduction within 12.9 min (60% amplitude, 0.64 W/mL). Secondly, a quadratic regression model accurately described H2O2/AH2 driven depolymerization, identifying temperature, reaction time, and redox system-to-ulvan ratio as the main factors involved. The combined US–redox process reduced from 1058 to 31.7 kDa within 60 min, whereas acid hydrolysis control (0.1 M HCl) achieved only a reduction from 1022 to 429 kDa under the same treatment time. Optimal depolymerization conditions predicted an H2O2/AH2 ratio of 3.5, Redox system/Ulvan ratio of 4, temperature of 60 ◦C, and reaction time of 85.5 min, yielding a 15 kDa product, which falls within the 95% prediction interval of the model. This product was further concentrated via TFF membranes and spray-dried, with HPSEC analysis confirming no significant change in molar mass distribution and Mw after drying. FTIR and 13C-1 H NMR analysis revealed that the depolymerized and spray-dried ulvan retained functional groups and structure, and that hydrolysis only occurred at the anomeric centers without significant side reactions. Overall, the sequential US-H2O2/AH2 approach offers a scalable and wellcontrolled strategy for producing low-molar-mass ulvan for specific applications., Agencia Estatal de Investigación | Ref. PID2024-155998OB-I00, Agencia Estatal de Investigación | Ref. CNS2024-154456, Ministerio de Ciencia, Innovación y Universidades| Ref. FPU23/04128
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Optimizing ultrasound-assisted extraction with custom design and response surface methodology: a case study using Ulva spp.

  • Baltrusch Montero, Kai Lois
  • Torres Pérez, María Dolores
  • Domínguez González, Herminia
This study presents an educational and structured optimization approach using a custom I-optimal response surface methodology to model and optimize ultrasound-assisted extraction (UAE), focusing on the recovery of ulvan, extraction of proteins, and phenolic compounds from Ulva spp. as a case study. The research serves as a replicable framework for researchers, educators and students in UAE from complex biomass substrates. The experimental design incorporated four independent variables: specific energy input (SEI, 10–110 J/mL), solid–liquid ratio (SLR, 1:60–1:30 w/w), amplitude (20–100 %, corresponding to 21–86 W and 9–46 μm), and temperature (30–90 ◦C). Although SEI and amplitude are partially related, they were treated as independent variables in the experimental design to assess their individual effects, with no multicollinearity detected. Response criteria included extraction or recovery yield (mg/g dry biomass), in dry extract (mg/g dry extract), and specific energy demand (kW⋅h/kg). SEI, SLR, and temperature were identified as the most influential factors, with amplitude playing a less important role. Higher SEI and temperature generally improved extraction but also increased energy consumption, highlighting the trade-offs relevant for industrial applications. The optimization scenarios favoured ulvan recovery under lower temperature and ultrasonication energyefficient conditions, demonstrating the need for a holistic approach rather than solely maximizing yield. The findings emphasize the importance of methodological design in optimizing UAE processes while ensuring, Agencia Estatal de Investigación | Ref. PID2021-124017-BI00, Agencia Estatal de Investigación | Ref. CNS2024-154456, Xunta de Galicia | Ref. ED431C 2022/08, Xunta de Galicia | Ref. ED431G 2023/06, Ministerio de Ciencia, Innovación y Universidades | Ref. FPU23/04128
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Microwave hydrodiffusion and gravity pretreatment of Camellia japonica flowers for the extraction of bioactives

  • Díaz Seoane Díaz Seoane, Francisco
  • Inoubli , Sheyma
  • Queffelec , Julie
  • González-Martínez, Noa
  • Kurman, Kelly V.
  • Almeida, Adelaide
  • Silva-Reis, Rita
  • Vieira, Catia
  • Díaz Reinoso, Beatriz
  • Flórez Fernández, Noélia
  • Torres Pérez, María Dolores
  • Piñeiro-Lago, Beatriz
  • Cardoso, Susana M.
  • Domínguez González, Herminia
The valorization of Camellia japonica flower varieties through the green extraction of their bioactive components is addressed. Microwave hydrodiffusion and gravity (MHG) can be an efficient and rapid pretreatment to dry the petals; for example, in the Royal Velvet variety, the energy consumption was 16 times lower compared to air drying. The hydrolates obtained in this stage represented only 0.5 mg gallic acid equivalents/g flower, but some of the fractions contained up to 10 times higher and a Trolox equivalent antioxidant capacity (TEAC) value equivalent to 0.4 g Trolox/g extract. The dried solids were extracted using 96% ethanol to yield around 30% solubles, which was 50% higher than the extraction yield from the air-dried samples. The MHG dried solids were treated with supercritical CO2 to yield up to 2.4% of an extract containing phenolics and lipids with a favorable omega-3 to omega-6 ratio. The residual solids from supercritical extraction were further processed with microwave heated pressurized hot water for 5 min at various temperatures. The 200 °C extract achieved a solubilization of 50% of the material, obtaining a product with 22% phenolic content, almost 30% of the antiradical capacity of Trolox, a minimum inhibitory concentration (MIC) value of 8 mg/mL against Staphylococcus aureus, and contained mainly organic acids, tannins like (epi)catechin gallate and B-type (epi)catechin oligomers, and prodelphinidins like (epi) gallocatechin-O-hexoside and (epi)catechin-(epi)gallocatechin gallate. The obtained extracts were proposed for incorporation onto starch films. The results confirm the potential of non-toxic solvents to achieve a complete valorization of this resource., Xunta de Galicia | Ref. ED431C 2022/08, Xunta de Galicia | Ref. ED431G 2023/06, Agencia Estatal de Investigación | Ref. CNS2024-154456, Universidade de Aveiro, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Optimized ultrasonication-redox process for controlled production of low molecular weight carrageenan

  • Baltrusch Montero, Kai Lois
  • Torres Pérez, María Dolores
  • Domínguez González, Herminia
Carrageenans are linear sulfated polysaccharides widely used in industry, but their high molecular weight and limited solubility restrict broader biomedical and agricultural applications. This study presents a two-step process combining ultrasonic pretreatment with a H2O2-AH2 redox system to produce low-molecular-weight carrageenan (LMWC) efficiently and controllably. Ultrasonication rapidly reduced molecular weight, homogenized polymer size, and preserved functional groups, as confirmed by HPSEC, rheology, FTIR and 1H NMR. Depolymerization kinetics followed a two-phase model, with the most energy-efficient ultrasonication at 60 % amplitude for 8.67 min (54.2 % MW reduction, 218.8 J/mL). Redox-assisted depolymerization was optimized via a quadratic model, showing strong effects of temperature and time, while intermediate reagent ratios maximized efficiency. Scaling from 150 mL to 2.2 L retained performance, producing ∼9.35 kDa LMWC with lower polydispersity, reduced reagent consumption, and faster processing than mild-acid hydrolysis controls. The purified fraction exhibited enhanced antioxidant activity (IC50 0.96 g/L, 270 mg Trolox equivalents/g). The sequential US, H2O2-AH2 method provides a scalable, controllable route to tailor LMWC for specific applications, outperforming conventional acid treatments and offering a robust alternative to enzymatic depolymerization., Agencia Estatal de Investigación | Ref. PID2021-124017B-I00, Agencia Estatal de Investigación | Ref. CNS2024-154456, Xunta de Galicia | Ref. ED431C 2022/08, Xunta de Galicia | Ref. ED481D 2022/018, Ministerio de Ciencia, Innovación y Universidades | Ref. FPU23/04128, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Integrated extraction, film formulation, and physicochemical comparison of crude carrageenans from Mastocarpus stellatus: exploring enzymatic, hydrothermal, and ultrasonication pathways

  • Baltrusch Montero, Kai Lois
  • Torres Pérez, María Dolores
  • Domínguez González, Herminia
This study evaluated various extraction pathways for crude carrageenan extraction (CCAR) from Mastocarpus stellatus (Stackhouse) Guiry, using combinations of hydrothermal-, enzymatic- (Cellic® CTec3), and ultrasound (US)-assisted extractions. Extraction yield, purity, chemical composition, structural features, film and gel rheology were assessed to guide an integrated seaweed biorefinery design. Hydrothermal-assisted extraction yielded CCAR with a low ash content of 17% (d.w.) and an apparent molecular weight (Mw) of 1087 kDa, though recovery was limited (11.1%). Enzymatic extraction (CCAR-6) achieved the highest CCAR yield (38.5% d.w.) while maintaining relatively high Mw (1210 kDa). Combined enzyme-US extractions resulted in CCAR recovery up to 33.5% d.w. but with increased ash and protein contents, especially in carrageenan recovered from solid residue extracts (e.g., CCAR-7: 35.5% ash, 6.1% protein; d.w.). Gels from CCAR with low contamination and high apparent Mw, tended to higher complex viscosity. Conversely, gels derived from low Mw or high-ash CCARs, showed lower complex viscosity. Rheological analysis of carrageenan films with PEG600 revealed correlations between extract purity, and viscoelastic performance, although no clear effect of Mw could be distiguished. Overall, the results underscore the impact of different extraction technologies on CCAR functionality and purity, as well as potential of solid residues, providing a foundation for efficient and sustainable extraction protocols in macroalgal biorefineries., Agencia Estatal de Investigación | Ref. RTI2018-096376-B-I00, Agencia Estatal de Investigación | Ref. CNS2024-154456, Ministerio de Ciencia, Innovación y Universidades | Ref. FPU23/04128, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

From invasive waste biomass to value-added products: cascade biorefinery processing of Ulex europaeus to oligosaccharides and antioxidants

  • Rodríguez Iglesias, Pablo
  • Torres Pérez, María Dolores
  • Rivas Siota, Sandra
Invasive lignocellulosic biomass poses a growing environmental challenge due to its accumulation and associated management costs. Among these, Ulex europaeus (gorse) is a highly flammable species that contributes to wildfire risk, requiring periodic removal and generating large volumes of underutilized waste. This study proposes a cascade biorefinery approach to convert gorse into value-added products through integrated processing. Microwave-assisted hydrothermal processing was applied and compared with conventional heating, achieving comparable oligosaccharide yields at lower nominal severity. These differences are discussed considering the distinct heating behavior of both systems. The processing enabled the selective solubilization of hemicellulose-derived compounds, mainly oligosaccharides, together with the co-extraction of phenolics. Downstream processing was performed using environmentally friendly technologies, including sequential membrane (5 and 1 kDa) and ion-exchange refining. Membrane processing generated oligosaccharide-rich streams (up to 83.70 % of non-volatile compounds, NVC), while removing monosaccharides (90 %) and other NVC (ONVC > 70 %). This separation was governed not only by molecular size, but also by structural features, including substitution patterns. Ion-exchange treatment enhanced purification by reducing ONVC (>98 %) while preserving oligosaccharide content, highlighting the presence of phenolics across process streams. As a result, high-purity oligosaccharide streams were obtained; together with secondary streams in which phenolics were concentrated in desorbed streams. Structural features by HPSEC, HPAEC and MALDI-TOF-MS revealed the presence of acetylated and uroniccontaining xylooligosaccharides and their preferential association with higher-molecular-weight fractions. This cascade processing provides a pathway for the valorization of gorse into multiple high-value products, supporting efficient resource use and biomass management., Universidade de Vigo | Ref. 0623-137918, Agencia Estatal de Investigación | Ref. CNS2024-154456, Agencia Estatal de Investigación | Ref. RYC2021-031964-I, Xunta de Galicia | Ref. ED431F 2023/03, Universidade de Vigo/CISUG