Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación
Artículo científico (JournalArticle)
Modeling ulvan depolymerization by a sequential ultrasound-redox process for controlled low-molar-mass production
Ulvan, a sulfated polysaccharide derived from green macroalgae, exhibits promising biological and functional
properties. However, its high molar mass limits its applicability. This study develops a kinetic model describing
ulvan depolymerization using sequential ultrasonication (US) and hydrogen peroxide-ascorbic acid (H2O2/AH2)
redox treatment and evaluates the influence of key operational variables on apparent weight-average molar mass
(Mw) reduction. US depolymerization followed a one-phase exponential decay model, rapidly decreasing Mw,
achieving a 50% reduction within 12.9 min (60% amplitude, 0.64 W/mL). Secondly, a quadratic regression
model accurately described H2O2/AH2 driven depolymerization, identifying temperature, reaction time, and
redox system-to-ulvan ratio as the main factors involved. The combined US–redox process reduced from 1058 to
31.7 kDa within 60 min, whereas acid hydrolysis control (0.1 M HCl) achieved only a reduction from 1022 to
429 kDa under the same treatment time. Optimal depolymerization conditions predicted an H2O2/AH2 ratio of
3.5, Redox system/Ulvan ratio of 4, temperature of 60 ◦C, and reaction time of 85.5 min, yielding a 15 kDa
product, which falls within the 95% prediction interval of the model. This product was further concentrated via
TFF membranes and spray-dried, with HPSEC analysis confirming no significant change in molar mass distribution and Mw after drying. FTIR and 13C-1
H NMR analysis revealed that the depolymerized and spray-dried
ulvan retained functional groups and structure, and that hydrolysis only occurred at the anomeric centers
without significant side reactions. Overall, the sequential US-H2O2/AH2 approach offers a scalable and wellcontrolled strategy for producing low-molar-mass ulvan for specific applications., Agencia Estatal de Investigación | Ref. PID2024-155998OB-I00, Agencia Estatal de Investigación | Ref. CNS2024-154456, Ministerio de Ciencia, Innovación y Universidades| Ref. FPU23/04128
Proyecto:
AEI / Plan Estatal de Investigación Científica y Técnica y de Innovación 2024-2027 PID2024-155998OB-I00
,
AEI / Plan Estatal de Investigación Científica y Técnica y de Innovación 2024-2027 CNS2024-154456
DOI: http://hdl.handle.net/11093/12469, https://linkinghub.elsevier.com/retrieve/pii/S0268005X26006879
HANDLE: http://hdl.handle.net/11093/12469, https://linkinghub.elsevier.com/retrieve/pii/S0268005X26006879