Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

DAU Arxiu Digital de la Universitat Ramon Llull
Publicación Artículo científico (JournalArticle)

Mechanical performance of 3D-printed biocompatible polycarbonate for biomechanical applications

  • Gómez Gras, Giovanni
  • Abad, Manuel David
  • Pérez, Marco A.
Additive manufacturing has experienced remarkable growth in recent years due to the customisation, precision, and cost savings compared to conventional manufacturing techniques. In parallel, materials with great potential have been developed, such as PC-ISO polycarbonate, which has biocompatibility certifications for use in the biomedical industry. However, many of these synthetic materials are not capable of meeting the mechanical stresses to which the biological structure of the human body is naturally subjected. In this study, an exhaustive characterisation of the PC-ISO was carried out, including an investigation on the influence of the printing parameters by fused filament fabrication on its mechanical behaviour. It was found that the effect of the combination of the printing parameters does not have a notable impact on the mass, cost, and manufacturing time of the specimens; however, it is relevant when determining the tensile, bending, shear, impact, and fatigue strengths. The best combinations for its application in biomechanics are proposed, and the need to combine PC-ISO with other materials to achieve the necessary strengths for functioning as a bone scaffold is demonstrated., info:eu-repo/semantics/publishedVersion
DAU Arxiu Digital de la Universitat Ramon Llull
Publicación Artículo científico (JournalArticle)

Mechanical performance of additively manufactured lightweight cellular solids: Influence of cell pattern and relative density on the printing time and compression behavior

  • Forés-Garriga, Albert
  • Gomez-Gras, Giovanni
  • Pérez, Marco A.
A comprehensive investigation is presented on the Fused Filament Fabrication (FFF) technology’s possibilities to create cellular solids with a broad spectrum of specific stiffness and strength, modifying cell geometry and size, while addressing manufacturing matters such as inherent defects and built time. Thirteen typologies of two-dimensional cellular patterns with different relative densities are examined. Results have allowed conclusions to be drawn regarding the influence of cell type and infill density on mechanical performance. Intra-layer and inter-layer inherent defects identified after manufacturing highlight the importance of optimizing filament trajectories. A reliable comparison of the elastic properties of the cellular patterns as a function of their density is presented. An experimentally validated numerical model is provided for predicting the compression stiffness of the different cell patterns with an average deviation below 5%. The model can reproduce the behavior in the elastic range based on tensile specimen properties and a Normal Stiffness Factor to account for the phenomenon of elastic asymmetry of the FFF printed samples. The wide range of results achieved is experimental confirmation of the potential of FFF cellular solids. Lastly, this investigation provides analytical, numerical, and empirical validated evidence to further design-for-additive manufacturing strategies with cellular solids for designing advanced lightweight structures., info:eu-repo/semantics/publishedVersion
DAU Arxiu Digital de la Universitat Ramon Llull
Publicación Artículo científico (JournalArticle)

Role of infill parameters on the mechanical performance and weight reduction of PEI Ultem processed by FFF

  • Pérez, Marco A.
  • Gomez-Gras, Giovanni
  • Reyes Pozo, Guillermo
  • Forés-Garriga, Albert
In comparison with conventional manufacturing technologies, Fused Filament Fabrication (FFF) offers countless benefits. It broadens the horizons of the design of structural components with high geometrical complexity, and lighter elements can be obtained by optimizing the infill of the part. The infill density stands as a manufacturing parameter that plays a significant part in weight reduction purposes. This fact provides FFF with an outstanding competitive advantage as compared to the rest of the additive manufacturing technologies. This work aims to investigate the role of infill parameters on the mechanical performance and weight reduction of ULTEMTM 9085 samples processed by FFF, under tensile, flexural, and shear loading conditions in six different orientations with several solid and sparse configurations. Regarding the effect of the part orientation and the infill settings, the experimental results permit to draw conclusions on stiffness, resilience, maximum stress, and type of failure of the printed parts. Three-dimensional compliance matrices for each infill configuration are provided. The analysis of the results correlates the infill configuration with the mechanical performance considering the intra-layer and inter-layer unions. Finally, this research provides experimental evidence to contribute to the definition of novel design-for-manufacturing strategies for obtaining functional structural elements by FFF.
DAU Arxiu Digital de la Universitat Ramon Llull
Publicación Artículo científico (JournalArticle)

Comparative Analysis of Chemical, Thermal, and Mechanical Post-Process of Fused Filament Fabricated Polyetherimide Parts for Surface Quality Enhancement

  • Chueca de Bruijn, Ariadna
  • Gomez-Gras, Giovanni
  • Pérez, Marco A.
Additive manufacturing technologies are increasingly being used in production systems because they shorten product development time and production cost, but surface integrity remains a limitation to meet the standards set by conventional manufacturing. In this research article, two chemical, one thermal, and three mechanical finishing operations are proposed to post-process fused filament fabricated Ultem 9085 parts. Their effects on the parts’ surface quality and dimensional accuracy (changes in their width, height, length, and mass) are examined through optical and electron scanning microscopy, and the advantages and disadvantages of each method are discussed. Microscope evaluation has proven to be a powerful tool to observe apparent differences and understand the nature of different morphological changes. Results indicate that chemical and thermal treatments and ball burnishing are good candidates to significantly enhance the finish of the parts, despite requiring the use of solvents or provoking dimensional changes to the parts. The effects of abrasive mechanical treatments are more moderate at a macroscopic scale, but the surface of the filaments suffers the most remarkable changes., info:eu-repo/semantics/publishedVersion
DAU Arxiu Digital de la Universitat Ramon Llull
Publicación Artículo científico (JournalArticle)

Experimental study on the accuracy and surface quality of printed versus machined holes in PEI Ultem 9085 FDM specimens

Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Role of infill parameters on the mechanical performance and weight reduction of PEI Ultem processed by FFF

  • Pérez, Marco A.
  • Gomez-Gras, Giovanni
  • Reyes Pozo, Guillermo
  • Forés-Garriga, Albert
In comparison with conventional manufacturing technologies, Fused Filament Fabrication (FFF) offers countless benefits. It broadens the horizons of the design of structural components with high geometrical complexity, and lighter elements can be obtained by optimizing the infill of the part. The infill density stands as a manufacturing parameter that plays a significant part in weight reduction purposes. This fact provides FFF with an outstanding competitive advantage as compared to the rest of the additive manufacturing technologies. This work aims to investigate the role of infill parameters on the mechanical performance and weight reduction of ULTEMTM 9085 samples processed by FFF, under tensile, flexural, and shear loading conditions in six different orientations with several solid and sparse configurations. Regarding the effect of the part orientation and the infill settings, the experimental results permit to draw conclusions on stiffness, resilience, maximum stress, and type of failure of the printed parts. Three-dimensional compliance matrices for each infill configuration are provided. The analysis of the results correlates the infill configuration with the mechanical performance considering the intra-layer and inter-layer unions. Finally, this research provides experimental evidence to contribute to the definition of novel design-for-manufacturing strategies for obtaining functional structural elements by FFF.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Comparative Analysis of Chemical, Thermal, and Mechanical Post-Process of Fused Filament Fabricated Polyetherimide Parts for Surface Quality Enhancement

  • Chueca de Bruijn, Ariadna
  • Gomez-Gras, Giovanni
  • Pérez, Marco A.
Additive manufacturing technologies are increasingly being used in production systems because they shorten product development time and production cost, but surface integrity remains a limitation to meet the standards set by conventional manufacturing. In this research article, two chemical, one thermal, and three mechanical finishing operations are proposed to post-process fused filament fabricated Ultem 9085 parts. Their effects on the parts’ surface quality and dimensional accuracy (changes in their width, height, length, and mass) are examined through optical and electron scanning microscopy, and the advantages and disadvantages of each method are discussed. Microscope evaluation has proven to be a powerful tool to observe apparent differences and understand the nature of different morphological changes. Results indicate that chemical and thermal treatments and ball burnishing are good candidates to significantly enhance the finish of the parts, despite requiring the use of solvents or provoking dimensional changes to the parts. The effects of abrasive mechanical treatments are more moderate at a macroscopic scale, but the surface of the filaments suffers the most remarkable changes., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Mechanical performance of 3D-printed biocompatible polycarbonate for biomechanical applications

  • Gómez Gras, Giovanni
  • Abad, Manuel David
  • Pérez, Marco A.
Additive manufacturing has experienced remarkable growth in recent years due to the customisation, precision, and cost savings compared to conventional manufacturing techniques. In parallel, materials with great potential have been developed, such as PC-ISO polycarbonate, which has biocompatibility certifications for use in the biomedical industry. However, many of these synthetic materials are not capable of meeting the mechanical stresses to which the biological structure of the human body is naturally subjected. In this study, an exhaustive characterisation of the PC-ISO was carried out, including an investigation on the influence of the printing parameters by fused filament fabrication on its mechanical behaviour. It was found that the effect of the combination of the printing parameters does not have a notable impact on the mass, cost, and manufacturing time of the specimens; however, it is relevant when determining the tensile, bending, shear, impact, and fatigue strengths. The best combinations for its application in biomechanics are proposed, and the need to combine PC-ISO with other materials to achieve the necessary strengths for functioning as a bone scaffold is demonstrated., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Experimental study on the accuracy and surface quality of printed versus machined holes in PEI Ultem 9085 FDM specimens

Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

SLM manufacturing redesign of cooling inserts for high production steel moulds and benchmarking with other industrial additive manufacturing strategies

  • Minguella Canela, Joaquim
  • Morales Planas, Sergio
  • Santos López, M. Antonia de los
Moulding technologies are remarkably effective for parts requiring high production volumes. Yet cooling the moulds after each injection can cause a significant loss of time. A possibility for reducing the cooling times is to use cooling inserts and conformal cooling strategies. In the present case, the original inserts of a mould must be substituted because the original material cannot be utilized anymore (toxicity). Will it be technically feasible to achieve a proper cooling only by modifying the inserts? Here, the cooling inserts of high production steel moulds utilized to manufacture ribs for swimming pool sinks’ plastic cages are redesigned, simulated and manufactured, taking advantage of Selective Laser Melting possibilities and without modifying the geometry of the obtained parts, nor the rest of the moulds. The results reveal a reduction in the mould cooling times of up to 8%, while maintaining the same conformation properties, thus leading to important savings of time and some global costs in the production outcomes. The study also benchmarks the production economic limits of this approach compared to other possible strategies, such as the development of full new conformal cooling moulds or the industrial production of the parts with plastic additive manufacturing (multi jet fusion) technology., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Mechanical performance of additively manufactured lightweight cellular solids: Influence of cell pattern and relative density on the printing time and compression behavior

  • Forés-Garriga, Albert
  • Gomez-Gras, Giovanni
  • Pérez, Marco A.
A comprehensive investigation is presented on the Fused Filament Fabrication (FFF) technology’s possibilities to create cellular solids with a broad spectrum of specific stiffness and strength, modifying cell geometry and size, while addressing manufacturing matters such as inherent defects and built time. Thirteen typologies of two-dimensional cellular patterns with different relative densities are examined. Results have allowed conclusions to be drawn regarding the influence of cell type and infill density on mechanical performance. Intra-layer and inter-layer inherent defects identified after manufacturing highlight the importance of optimizing filament trajectories. A reliable comparison of the elastic properties of the cellular patterns as a function of their density is presented. An experimentally validated numerical model is provided for predicting the compression stiffness of the different cell patterns with an average deviation below 5%. The model can reproduce the behavior in the elastic range based on tensile specimen properties and a Normal Stiffness Factor to account for the phenomenon of elastic asymmetry of the FFF printed samples. The wide range of results achieved is experimental confirmation of the potential of FFF cellular solids. Lastly, this investigation provides analytical, numerical, and empirical validated evidence to further design-for-additive manufacturing strategies with cellular solids for designing advanced lightweight structures., info:eu-repo/semantics/publishedVersion