Pasar al contenido principal

NUEVOS DESARROLLOS EN ESTRUCTURA LIGERA TIPO SANDWICH CON NUCLEOS IMPRESOS EN 3D

RTI2018-099754-A-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT RAMON LLULL, FUNDACIO PRIVADA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 18
Encontrada(s) 1 página(s)

DAU Arxiu Digital de la Universitat Ramon Llull
Publicación Artículo científico (JournalArticle)

Mechanical performance of additively manufactured lightweight cellular solids: Influence of cell pattern and relative density on the printing time and compression behavior

  • Forés-Garriga, Albert
  • Gomez-Gras, Giovanni
  • Pérez, Marco A.
A comprehensive investigation is presented on the Fused Filament Fabrication (FFF) technology’s possibilities to create cellular solids with a broad spectrum of specific stiffness and strength, modifying cell geometry and size, while addressing manufacturing matters such as inherent defects and built time. Thirteen typologies of two-dimensional cellular patterns with different relative densities are examined. Results have allowed conclusions to be drawn regarding the influence of cell type and infill density on mechanical performance. Intra-layer and inter-layer inherent defects identified after manufacturing highlight the importance of optimizing filament trajectories. A reliable comparison of the elastic properties of the cellular patterns as a function of their density is presented. An experimentally validated numerical model is provided for predicting the compression stiffness of the different cell patterns with an average deviation below 5%. The model can reproduce the behavior in the elastic range based on tensile specimen properties and a Normal Stiffness Factor to account for the phenomenon of elastic asymmetry of the FFF printed samples. The wide range of results achieved is experimental confirmation of the potential of FFF cellular solids. Lastly, this investigation provides analytical, numerical, and empirical validated evidence to further design-for-additive manufacturing strategies with cellular solids for designing advanced lightweight structures., info:eu-repo/semantics/publishedVersion
DAU Arxiu Digital de la Universitat Ramon Llull
Publicación Artículo científico (JournalArticle)

Selective dissolution of polysulfone support material of fused filament fabricated Ultem 9085 parts

  • Chueca de Bruijn, Ariadna
  • Gomez-Gras, Giovanni
  • Pérez, Marco A.
One of the main advantages of 3D printing lies in the fact that the desired object is constructed layer by layer, enabling the production of complex geometries otherwise unfeasible with conventional manufacturing methods. To create these parts, the use of an auxiliary scaffold structure, made of either the same or a different material than the model, is usually mandatory to avoid structural collapse during fabrication. Such support materials need to be chemically or manually removed after the part is manufactured. However, the removal process can potentially damage the object and poses a problem when the part presents intricate or hidden cavities. This study presents a time-effective, temperature-controlled methodology to dissolve the only commercially available Ultem™ 9085 (Ultem) support material. The process to select a novel solvent and its effects on Ultem’s mechanical performance in terms of compression, tensile and bending properties is addressed. At the same time, the influence of the chemical post-process on Ultem’s flammability is evaluated, given that the FST (flame, smoke, and toxicity) certification of this material is one of the most attractive properties for its applicability in certain industrial sectors. Results are supported by optical and scanning electron microscopy. The outcomes of this research are intended to provide practical recommendations for the use and scaling of the proposed solvent by the industrial sector., info:eu-repo/semantics/publishedVersion
DAU Arxiu Digital de la Universitat Ramon Llull
Publicación Artículo científico (JournalArticle)

Additively manufactured three-dimensional lightweight cellular solids: Experimental and numerical analysis

  • Fornés Garriga, Albert
  • Gómez Gras, Giovanni
  • Pérez, Marco A.
The development of cellular solids is one of the research fields in which additive manufacturing has made relevant progress in producing lightweight components and enhancing their performance. This work presents comprehensive research on the mechanical performance of fused filament fabricated three-dimensional lightweight cellular solids, including open-cell and closed-cell lattice designs and triply periodic minimal surfaces (TPMS), with different cell sizes and infill densities. The aim of this work is to determine the range and limits of the achievable mechanical behavior by employing different cell designs made from a single material and manufacturing technique. Experimental results obtained with cell designs fabricated with a high-performance polymer (PEI Ultem) showed wide ranges of effective stiffnesses from 1 to 293 MPa, strengths from 0.1 to 18.1 MPa, and densities from 0.066 to 0.541 g/cm3. Furthermore, two validated numerical approaches are provided to simulate their mechanical performance accurately. Moreover, a novel and robust index to quantify the isotropy of additively manufactured cellular solids based on the graphical representation of the homogenized stiffness tensor is proposed. Finally, experimental evidence states that the Shell-TPMS designs proved to be the most efficient cellular pattern, followed by the Skeletal-TPMS and the lattice configurations., info:eu-repo/semantics/publishedVersion
DAU Arxiu Digital de la Universitat Ramon Llull
Publicación Artículo científico (JournalArticle)

Role of infill parameters on the mechanical performance and weight reduction of PEI Ultem processed by FFF

  • Pérez, Marco A.
  • Gomez-Gras, Giovanni
  • Reyes Pozo, Guillermo
  • Forés-Garriga, Albert
In comparison with conventional manufacturing technologies, Fused Filament Fabrication (FFF) offers countless benefits. It broadens the horizons of the design of structural components with high geometrical complexity, and lighter elements can be obtained by optimizing the infill of the part. The infill density stands as a manufacturing parameter that plays a significant part in weight reduction purposes. This fact provides FFF with an outstanding competitive advantage as compared to the rest of the additive manufacturing technologies. This work aims to investigate the role of infill parameters on the mechanical performance and weight reduction of ULTEMTM 9085 samples processed by FFF, under tensile, flexural, and shear loading conditions in six different orientations with several solid and sparse configurations. Regarding the effect of the part orientation and the infill settings, the experimental results permit to draw conclusions on stiffness, resilience, maximum stress, and type of failure of the printed parts. Three-dimensional compliance matrices for each infill configuration are provided. The analysis of the results correlates the infill configuration with the mechanical performance considering the intra-layer and inter-layer unions. Finally, this research provides experimental evidence to contribute to the definition of novel design-for-manufacturing strategies for obtaining functional structural elements by FFF.
DAU Arxiu Digital de la Universitat Ramon Llull
Publicación Artículo científico (JournalArticle)

Optimization of a combined thermal annealing and isostatic pressing process for mechanical and surface enhancement of Ultem FDM parts using Doehlert experimental designs

  • Chueca de Bruijn, Ariadna
  • Gomez-Gras, Giovanni
  • Fernandez-Ruano, Laura
  • Farràs-Tasias, Laia
  • Pérez, Marco A.
The mechanical anisotropy of Fused Deposition Modeling (FDM) fabricated parts due to voids and non-uniform bond formation between rasters represents a major challenge for the widespread adoption of this fabrication technique. The present article addresses a novel post-processing procedure for FDM Ultem™ 9085 parts based on thermal annealing coupled with isostatic pressing to produce specimens with improved mechanical and surface properties. Response surface methodology was used to obtain mathematical models for all the studied responses. In particular, the sequentiality of Doehlert Designs was exploited to select the optimal combination of time and temperature of the process, resulting in specimens with noticeably improved layer adhesion, as noted by enhancements in flexural modulus, flexural strength, strain at flexural strength, and surface roughness. Confirmatory experiences of the optimal point with different printing orientations have demonstrated the capability of the proposed method to reduce anisotropy in the mechanical properties of the treated parts. In addition, microscopy imaging, Raman spectroscopy, and X-ray diffraction were beneficial to justify the observed results. This study sheds new light on the post-processing of FDM polymers, and the presented optimization methodology can be extrapolated to other materials and processes., info:eu-repo/semantics/acceptedVersion
DAU Arxiu Digital de la Universitat Ramon Llull
Publicación Artículo científico (JournalArticle)

A comprehensive fatigue analysis of high performance polyetherimide parts fabricatedusing extrusion-based additive manufacturing

  • Gomez-Gras, Giovanni
  • Mera Bastidas, María Cecilia
  • Pérez, Marco A.
This paper investigates the fatigue behavior of high-performance polyetherimide components manufactured via MEX-AM, focusing on the influence of key process parameters. Thirty configurations were tested under four load levels, and fractographic analysis was conducted to study crack initiation and propagation. Building direction proved critical, with edge-printed specimens showing up to 2.4 times longer fatigue life under low loads than flat-printed ones. Sparse configurations, despite lower mass, achieved similar or even superior specific performance compared to solid ones. For example, X-Flat-0.25 mm doubled the fatigue life of the best solid specimen under low loads with a 24% weight reduction, while X-Flat-0.75 mm achieved a 44% mass saving with only a 15.5% reduction in fatigue life. These results demonstrate the potential of optimized sparse designs for lightweight, high-performance MEX-AM parts., info:eu-repo/semantics/acceptedVersion
DAU Arxiu Digital de la Universitat Ramon Llull
Publicación Artículo científico (JournalArticle)

Lightweight hybrid composite sandwich structures with additively manufactured cellular cores

  • Forés-Garriga, Albert
  • Gomez-Gras, Giovanni
  • Pérez, Marco A.
This study focuses on advancing sandwich structures by designing and fabricating complex two- and three-dimensional cellular cores combined with Carbon Fiber Reinforced Polymer (CFRP) skins. Numerical analysis is used to investigate the effect of core design and density on the bending performance. Optimal configurations are identified and experimentally validated. Professional Fused Filament Fabrication (FFF) equipment with a heating chamber is employed for manufacturing the core samples to enhance layer cohesion and material joint stiffness. A high-performance technical polymer with a superior strength-to-weight ratio is employed to maximize structural capabilities. Hybrid sandwich structures with PEI Ultem cellular cores demonstrate stiffness and strength comparable to reference materials, outperforming foam cores while slightly trailing behind Nomex® and aluminum honeycombs. In addition, the results demonstrate more efficient cell morphologies achievable through additive manufacturing technologies, surpassing the hexagonal design. This work provides valuable insights into hybrid composite materials and the potential of additive manufacturing in creating lightweight, high-performance sandwich panels., info:eu-repo/semantics/acceptedVersion
DAU Arxiu Digital de la Universitat Ramon Llull
Publicación Artículo científico (JournalArticle)

Comparative Analysis of Chemical, Thermal, and Mechanical Post-Process of Fused Filament Fabricated Polyetherimide Parts for Surface Quality Enhancement

  • Chueca de Bruijn, Ariadna
  • Gomez-Gras, Giovanni
  • Pérez, Marco A.
Additive manufacturing technologies are increasingly being used in production systems because they shorten product development time and production cost, but surface integrity remains a limitation to meet the standards set by conventional manufacturing. In this research article, two chemical, one thermal, and three mechanical finishing operations are proposed to post-process fused filament fabricated Ultem 9085 parts. Their effects on the parts’ surface quality and dimensional accuracy (changes in their width, height, length, and mass) are examined through optical and electron scanning microscopy, and the advantages and disadvantages of each method are discussed. Microscope evaluation has proven to be a powerful tool to observe apparent differences and understand the nature of different morphological changes. Results indicate that chemical and thermal treatments and ball burnishing are good candidates to significantly enhance the finish of the parts, despite requiring the use of solvents or provoking dimensional changes to the parts. The effects of abrasive mechanical treatments are more moderate at a macroscopic scale, but the surface of the filaments suffers the most remarkable changes., info:eu-repo/semantics/publishedVersion
DAU Arxiu Digital de la Universitat Ramon Llull
Publicación Artículo científico (JournalArticle)

Experimental study on the accuracy and surface quality of printed versus machined holes in PEI Ultem 9085 FDM specimens

Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Role of infill parameters on the mechanical performance and weight reduction of PEI Ultem processed by FFF

  • Pérez, Marco A.
  • Gomez-Gras, Giovanni
  • Reyes Pozo, Guillermo
  • Forés-Garriga, Albert
In comparison with conventional manufacturing technologies, Fused Filament Fabrication (FFF) offers countless benefits. It broadens the horizons of the design of structural components with high geometrical complexity, and lighter elements can be obtained by optimizing the infill of the part. The infill density stands as a manufacturing parameter that plays a significant part in weight reduction purposes. This fact provides FFF with an outstanding competitive advantage as compared to the rest of the additive manufacturing technologies. This work aims to investigate the role of infill parameters on the mechanical performance and weight reduction of ULTEMTM 9085 samples processed by FFF, under tensile, flexural, and shear loading conditions in six different orientations with several solid and sparse configurations. Regarding the effect of the part orientation and the infill settings, the experimental results permit to draw conclusions on stiffness, resilience, maximum stress, and type of failure of the printed parts. Three-dimensional compliance matrices for each infill configuration are provided. The analysis of the results correlates the infill configuration with the mechanical performance considering the intra-layer and inter-layer unions. Finally, this research provides experimental evidence to contribute to the definition of novel design-for-manufacturing strategies for obtaining functional structural elements by FFF.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Selective dissolution of polysulfone support material of fused filament fabricated Ultem 9085 parts

  • Chueca de Bruijn, Ariadna
  • Gomez-Gras, Giovanni
  • Pérez, Marco A.
One of the main advantages of 3D printing lies in the fact that the desired object is constructed layer by layer, enabling the production of complex geometries otherwise unfeasible with conventional manufacturing methods. To create these parts, the use of an auxiliary scaffold structure, made of either the same or a different material than the model, is usually mandatory to avoid structural collapse during fabrication. Such support materials need to be chemically or manually removed after the part is manufactured. However, the removal process can potentially damage the object and poses a problem when the part presents intricate or hidden cavities. This study presents a time-effective, temperature-controlled methodology to dissolve the only commercially available Ultem™ 9085 (Ultem) support material. The process to select a novel solvent and its effects on Ultem’s mechanical performance in terms of compression, tensile and bending properties is addressed. At the same time, the influence of the chemical post-process on Ultem’s flammability is evaluated, given that the FST (flame, smoke, and toxicity) certification of this material is one of the most attractive properties for its applicability in certain industrial sectors. Results are supported by optical and scanning electron microscopy. The outcomes of this research are intended to provide practical recommendations for the use and scaling of the proposed solvent by the industrial sector., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Optimization of a combined thermal annealing and isostatic pressing process for mechanical and surface enhancement of Ultem FDM parts using Doehlert experimental designs

  • Chueca de Bruijn, Ariadna
  • Gomez-Gras, Giovanni
  • Fernandez-Ruano, Laura
  • Farràs-Tasias, Laia
  • Pérez, Marco A.
The mechanical anisotropy of Fused Deposition Modeling (FDM) fabricated parts due to voids and non-uniform bond formation between rasters represents a major challenge for the widespread adoption of this fabrication technique. The present article addresses a novel post-processing procedure for FDM Ultem™ 9085 parts based on thermal annealing coupled with isostatic pressing to produce specimens with improved mechanical and surface properties. Response surface methodology was used to obtain mathematical models for all the studied responses. In particular, the sequentiality of Doehlert Designs was exploited to select the optimal combination of time and temperature of the process, resulting in specimens with noticeably improved layer adhesion, as noted by enhancements in flexural modulus, flexural strength, strain at flexural strength, and surface roughness. Confirmatory experiences of the optimal point with different printing orientations have demonstrated the capability of the proposed method to reduce anisotropy in the mechanical properties of the treated parts. In addition, microscopy imaging, Raman spectroscopy, and X-ray diffraction were beneficial to justify the observed results. This study sheds new light on the post-processing of FDM polymers, and the presented optimization methodology can be extrapolated to other materials and processes., info:eu-repo/semantics/acceptedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Additively manufactured three-dimensional lightweight cellular solids: Experimental and numerical analysis

  • Fornés Garriga, Albert
  • Gómez Gras, Giovanni
  • Pérez, Marco A.
The development of cellular solids is one of the research fields in which additive manufacturing has made relevant progress in producing lightweight components and enhancing their performance. This work presents comprehensive research on the mechanical performance of fused filament fabricated three-dimensional lightweight cellular solids, including open-cell and closed-cell lattice designs and triply periodic minimal surfaces (TPMS), with different cell sizes and infill densities. The aim of this work is to determine the range and limits of the achievable mechanical behavior by employing different cell designs made from a single material and manufacturing technique. Experimental results obtained with cell designs fabricated with a high-performance polymer (PEI Ultem) showed wide ranges of effective stiffnesses from 1 to 293 MPa, strengths from 0.1 to 18.1 MPa, and densities from 0.066 to 0.541 g/cm3. Furthermore, two validated numerical approaches are provided to simulate their mechanical performance accurately. Moreover, a novel and robust index to quantify the isotropy of additively manufactured cellular solids based on the graphical representation of the homogenized stiffness tensor is proposed. Finally, experimental evidence states that the Shell-TPMS designs proved to be the most efficient cellular pattern, followed by the Skeletal-TPMS and the lattice configurations., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Comparative Analysis of Chemical, Thermal, and Mechanical Post-Process of Fused Filament Fabricated Polyetherimide Parts for Surface Quality Enhancement

  • Chueca de Bruijn, Ariadna
  • Gomez-Gras, Giovanni
  • Pérez, Marco A.
Additive manufacturing technologies are increasingly being used in production systems because they shorten product development time and production cost, but surface integrity remains a limitation to meet the standards set by conventional manufacturing. In this research article, two chemical, one thermal, and three mechanical finishing operations are proposed to post-process fused filament fabricated Ultem 9085 parts. Their effects on the parts’ surface quality and dimensional accuracy (changes in their width, height, length, and mass) are examined through optical and electron scanning microscopy, and the advantages and disadvantages of each method are discussed. Microscope evaluation has proven to be a powerful tool to observe apparent differences and understand the nature of different morphological changes. Results indicate that chemical and thermal treatments and ball burnishing are good candidates to significantly enhance the finish of the parts, despite requiring the use of solvents or provoking dimensional changes to the parts. The effects of abrasive mechanical treatments are more moderate at a macroscopic scale, but the surface of the filaments suffers the most remarkable changes., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A comprehensive fatigue analysis of high performance polyetherimide parts fabricatedusing extrusion-based additive manufacturing

  • Gomez-Gras, Giovanni
  • Mera Bastidas, María Cecilia
  • Pérez, Marco A.
This paper investigates the fatigue behavior of high-performance polyetherimide components manufactured via MEX-AM, focusing on the influence of key process parameters. Thirty configurations were tested under four load levels, and fractographic analysis was conducted to study crack initiation and propagation. Building direction proved critical, with edge-printed specimens showing up to 2.4 times longer fatigue life under low loads than flat-printed ones. Sparse configurations, despite lower mass, achieved similar or even superior specific performance compared to solid ones. For example, X-Flat-0.25 mm doubled the fatigue life of the best solid specimen under low loads with a 24% weight reduction, while X-Flat-0.75 mm achieved a 44% mass saving with only a 15.5% reduction in fatigue life. These results demonstrate the potential of optimized sparse designs for lightweight, high-performance MEX-AM parts., info:eu-repo/semantics/acceptedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Experimental study on the accuracy and surface quality of printed versus machined holes in PEI Ultem 9085 FDM specimens

Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Lightweight hybrid composite sandwich structures with additively manufactured cellular cores

  • Forés-Garriga, Albert
  • Gomez-Gras, Giovanni
  • Pérez, Marco A.
This study focuses on advancing sandwich structures by designing and fabricating complex two- and three-dimensional cellular cores combined with Carbon Fiber Reinforced Polymer (CFRP) skins. Numerical analysis is used to investigate the effect of core design and density on the bending performance. Optimal configurations are identified and experimentally validated. Professional Fused Filament Fabrication (FFF) equipment with a heating chamber is employed for manufacturing the core samples to enhance layer cohesion and material joint stiffness. A high-performance technical polymer with a superior strength-to-weight ratio is employed to maximize structural capabilities. Hybrid sandwich structures with PEI Ultem cellular cores demonstrate stiffness and strength comparable to reference materials, outperforming foam cores while slightly trailing behind Nomex® and aluminum honeycombs. In addition, the results demonstrate more efficient cell morphologies achievable through additive manufacturing technologies, surpassing the hexagonal design. This work provides valuable insights into hybrid composite materials and the potential of additive manufacturing in creating lightweight, high-performance sandwich panels., info:eu-repo/semantics/acceptedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Mechanical performance of additively manufactured lightweight cellular solids: Influence of cell pattern and relative density on the printing time and compression behavior

  • Forés-Garriga, Albert
  • Gomez-Gras, Giovanni
  • Pérez, Marco A.
A comprehensive investigation is presented on the Fused Filament Fabrication (FFF) technology’s possibilities to create cellular solids with a broad spectrum of specific stiffness and strength, modifying cell geometry and size, while addressing manufacturing matters such as inherent defects and built time. Thirteen typologies of two-dimensional cellular patterns with different relative densities are examined. Results have allowed conclusions to be drawn regarding the influence of cell type and infill density on mechanical performance. Intra-layer and inter-layer inherent defects identified after manufacturing highlight the importance of optimizing filament trajectories. A reliable comparison of the elastic properties of the cellular patterns as a function of their density is presented. An experimentally validated numerical model is provided for predicting the compression stiffness of the different cell patterns with an average deviation below 5%. The model can reproduce the behavior in the elastic range based on tensile specimen properties and a Normal Stiffness Factor to account for the phenomenon of elastic asymmetry of the FFF printed samples. The wide range of results achieved is experimental confirmation of the potential of FFF cellular solids. Lastly, this investigation provides analytical, numerical, and empirical validated evidence to further design-for-additive manufacturing strategies with cellular solids for designing advanced lightweight structures., info:eu-repo/semantics/publishedVersion