Pasar al contenido principal

INSTALACIONES FRIGORIFICAS MEDIOAMBIENTALMENTE SOSTENIBLES. ESTUDIO DE ASPECTOS ENERGETICOS RELACIONADOS CON LA APLICACION DEL REFRIGERANTE NATURAL CO2.

CTM2008-06468-C02-02

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2008
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSITAT JAUME I DE CASTELLO
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A comparative analysis of a CO2 evaporator model using experimental heat transfer correlations and a flow pattern map

  • Patino, J.
  • Llopis, R.
  • Sanchez, D.
  • Sanz-Kock, C.
  • Cabello, R.
  • Torrella Alcaraz, Enrique
This work analyses and compares two approaches to evaluate the boiling heat transfer of CO2 in a real evaporation process: classical empirical correlations and flow pattern maps. We develop a finite-volume mathematical model of an evaporator to contrast both approaches and simulate it with four empirical correlations, not developed for CO2 but tested successfully with it, and a flow pattern map specific for CO2. We contrast the results of the simulation with 73 experimental steady-states performed with a transcritical CO2 refrigeration plant that incorporates a concentric counter current evaporator. We observe that both approaches can predict the evaporation process of CO2, nonetheless, in spite of the more complex mathematical formulation, the considered flow pattern map allows to obtain more precision., The authors are indebted to the Spanish Ministry of Education and Science (CTM2008-06468-C02-02/TECNO) for the economic support given to the present work.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A general methodology for energy comparison of intermediate configurations in two-stage vapour compression refrigeration systems

  • Torrella Alcaraz, Enrique
  • Larumbe Bernad, Juan Antonio
  • Cabello, R.
  • Llopis, R.
  • Sanchez, D.
The aim of the present paper is to describe a general methodology suitable for analysing any intermediate configuration considered in staged vapour compression refrigeration cycles. This general methodology only depends on two basic parameters related to the subcooling and desuperheating obtained in the inter-stage system. A COP expression based on the two basic parameters was obtained from the general configuration. By means of its particularization to seven common configurations, it was then possible to make an energy comparison of the various configurations working with two fluids appropriated for the low temperature domain such as ammonia and R-404A., The authors are indebted to the Spanish Ministry of Education and Science (CTM2008-06468-C02-02/TECNO) and to the Spanish Ministry of the Environment and Rural and Marine Affairs (200800050084716) for their economic support to this work.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental evaluation of HCFC-22 replacement by the drop-in fluids HFC-422A and HFC-417B for low temperature refrigeration applications

  • Llopis, R.
  • Cabello, R.
  • Sanchez, D.
  • Torrella Alcaraz, Enrique
  • Patino, J.
  • Sanchez, J. G.
The Regulation CE-1005/2009 has banned the use of virgin HCFC-22 in Europe from the 31st December 2009, because it contains chlorine, although its use is allowed up to the 31st December 2014 if it is recycled. Now, manufacturers are developing different free-chlorine drop-in solutions to replace the HCFC-22 in the existing equipment by non-ozone depleting substances in order to exhaust its remaining life. This work focuses on the experimental evaluation of two HCFC-22 drop-in solutions for low temperature applications, the HFC-422A and the HFC-417B, in a double-stage vapour compression plant driven by a compound compressor in an evaporating temperature range between -31 and -17 degrees C and in a condensing temperature range between 30 and 48 degrees C. The experimental results show that there is a reduction in cooling capacity and in COP with regard to the HCFC-22 operation, which is analysed and discussed in the paper., The authors would like to thank Fundacion Caixa Castello-Bancaixa (P1.1B2008-12) and to Spanish Ministry of Education and Science (CTM2008-06468-C02-02/TECNO) for their economic support given to the present study.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental analysis of energy performance of modified single-stage CO2 transcritical vapour compression cycles based on vapour injection in the suction line

  • Cabello, Ramón
  • Sánchez, Daniel
  • Patiño, Jorge
  • Llopis, Rodrigo
  • Torrella Alcaraz, Enrique
This work presents the experimental evaluation of the energy performance of a modified single-stage CO2 transcritical refrigeration plant with an internal heat exchanger (IHX) based on vapour injection in suction line. This modification, which is only applicable to refrigeration plants with an expansion process divided in two stages with a liquid receiver between them, consists of extracting saturated vapour from the liquid receiver in order to: decrease the vapour quality at the evaporator inlet, and reduce the superheating degree at the compressor suction by means of the expansion and following injection of the extracted refrigerant. Three different injection points have been evaluated experimentally: before the IHX, after the IHX and just before the suction chamber of the compressor. The experimental measurements show that the cooling capacity and COP can be enhanced in 9.81% and 7.01%, respectively. Furthermore, a reduction in the discharge temperature of the compressor up to 14.7 C has been measured inside the evaluation range., The authors are indebted to the Spanish Ministry of Education and Science (CTM2008-06468-C02-02/TECNO) and to the Spanish Ministry of the Environment and Rural and Marine Affairs (200800050084716) for the economic support given to the present work.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Development and validation of a finite element model for water - CO2 coaxial gas-coolers

  • Sanchez, D.
  • Cabello, R.
  • Llopis, R.
  • Torrella Alcaraz, Enrique
The gas-cooler heat exchanger is a characteristic device of the refrigeration plants that use CO2 as the working fluid in transcritical conditions. The proper gas-cooler sizing, allows getting the maximum effectiveness in the heat exchange, thus permitting to reduce the temperature approach and improving the heat recovered in the coolant (secondary) fluid and the COP of this kind of systems. This work deals with the development of a steady-state coaxial gas-cooler model that uses water as coolant fluid. The model is based on the finite-volume methodology and is validated with experimental data. An uncertainty lower than ±10% was obtained in the calculation of the heat transfer rates and an uncertainty lower than ±3 °C in the outlet temperatures of both fluids. Several correlations for estimating the CO2 heat convection coefficient have been studied to select the one that best fits the model. Using the model, the influence of different parameters on the gas-cooler thermal effectiveness has been analyzed and presented in this work. Finally, a comparison between the traditional ε-NTU method and the developed model has been done., The authors are indebted to the Spanish Ministry of Education and Science (CTM2008-06468-C02-02/TECNO) and to the Spanish Ministry of the Environment and Rural and Marine Affairs (200800050084716) for the economic support given to the present work.