Pasar al contenido principal

TRATAMIENTO ELECTROQUIMICO DE DISOLUCIONES DE COLORANTES REACTIVOS EMPLEADOS EN LA INDUSTRIA TEXTIL Y DESARROLLO DE NUEVOS MATERIALES ELECTRODICOS.

CTM2010-18842-C02-02

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2010
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Electrochemical treatment of a synthetic wastewater containing a sulphonated azo dye. Determination of naphthalenesulphonic compunds produced as main by-products

  • Del Río García, Ana Isabel
  • Fernández Sáez, Javier
  • Molina Puerto, Javier|||0000-0003-3378-8271
  • Bonastre Cano, José Antonio|||0000-0002-5068-6608
  • Cases, Francisco|||0000-0001-8105-4489
The electrochemical treatment of wastewaters from textile industry is a promising technique for substances which are resistant to biodegradation. This paper deals with the electrochemical decolourisation/degradation of synthetic solutions containing a reactive dye, C.I. Reactive Orange 4. Oxidation, reduction and oxido-reduction processes were evaluated using Ti/SnO 2-Sb-Pt and stainless steel electrodes as anode and cathode, respectively. Electrolyses were performed at galvanostatic conditions in a filter press reactor. Decolourisation and degradation were followed by means of total organic carbon (TOC), chemical oxygen demand (COD) measurements and high performance liquid chromatography (HPLC). A higher mineralisation rate for oxidation was found whilst oxido-reduction process gave more oxidised species. The kinetics of decolourisation was of pseudo-first order in all cases. The reduction process was the slowest process to decolourise. Gas chromatography-mass spectrometry (GC-MS) was employed to investigate the main intermediate compounds, confirming the presence of 2-amino-1, 5-naphthalenedisulphonic acid (2A15NDS) in solution. When this compound was generated, it was gradually degraded during the oxidation and oxido-reduction processes indicating the feasibility and durability of Ti/SnO 2-Sb-Pt electrodes. However, during the electrochemical reduction process, this compound was continuously generated but it was not degraded. © 2011 Elsevier B.V., The authors would like to acknowledge the Spanish Ministry of Science and Innovation (MICINN) and European Union (FEDER funds) for the financial support (CTM2007-66570-C02-02 and CTM2010-18842-C02-02). A. I. del Rio thanks the Spanish Ministry of Science and Innovation (MICINN) for her F.P.I. grant awarding. J. Molina is grateful to the Conselleria d'Educacio (Generalitat Valenciana) for his FPI grant awarding.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Synthesis and characterization of electrochemically Platinum-Polyaniline modified carbon textile electrode

  • Fernández Sáez, Javier
  • Del Río García, Ana Isabel
  • Molina Puerto, Javier|||0000-0003-3378-8271
  • Bonastre Cano, José Antonio|||0000-0002-5068-6608
  • Cases, Francisco|||0000-0001-8105-4489
[EN] The present work deals with the use of a carbon fiber fabric for electrochemical purposes. To carry out such investigation, suitable working electrodes of C, Pt/C and Pt/PANI/C were manufactured. Two types of electrodes were made from: Yarns pulled out from the woven textile (CYEs) and strips, 1 cm x 2 cm area, cut from the fabric (CSEs). Cyclic voltammetry (CV) was employed to carry out the electrosynthesis processes. Cyclic and linear voltammetry, electrochemical impedance spectroscopy (EIS) and scanning electrochemical microscopy (SECM) were used to study the electrocatalytic properties of carbon modified electrodes (CMEs). X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM) were used to know the chemical composition and to describe the morphology of the Pt/PANI/C and Pt/C modified surfaces. Sulphuric and amaranth solutions were chosen for the electrochemical experiments considering the possible applications of CMEs in the field of electrochemical treatment of industrial wastewater polluted with azo dyes., The authors would like to acknowledge to the Spanish Ministry of Science and Innovation (MICINN) for the financial support (CTM2010-18842-C02-02 and CTM 2011-23583), to the Universitat Politecnica de Valencia (Vicerrectorado de Investigacion PAID-06-10 contract 003-233) for the financial support and to the company Carbongen S.A., Cocentaina, Spain, that kindly donated the activated carbon fabric.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Study of the electrical properties of novel hybrid organic-inorganic conducting textiles of polypyrrole-phosphotungstate-polyester using electrochemical impedance spectroscopy

  • Bonastre Cano, José Antonio|||0000-0002-5068-6608
  • Molina Puerto, Javier|||0000-0003-3378-8271
  • Cases, Francisco|||0000-0001-8105-4489
  • Del Río García, Ana Isabel
  • Galván, J. C.
The electrical properties of novel hybrid organic-inorganic conducting fabrics of polyester (PES) coated with polypyrrole-PW12O 403- (PPy-POM) have been tested for dry samples and specimens immersed in different pH solutions (1, 7, and 13). Electrical properties changes were measured by means of electrochemical impedance spectroscopy (EIS). This study showed that organic-inorganic PES-PPy-POM conducting textiles act as electronic conductors with semiconducting nature. The electrical conductivity was measured for different temperatures and a value of 44.4 meV was obtained for the activation energy by means of Arrhenius model. Samples immersed in solution increased their conductivity in more acid solutions due to polypyrrole protonation. As acidity increased protonation and oxidation state of polypyrrole chains increased, and a greater diffusion of counter-ions was observed since the hybrid conducting textiles presented a more swollen and porous structure. Counter-ion exchange was higher in more acid solutions since more charge was needed to compensate the positive charge of more oxidized polypyrrole chains. A catalytic effect might be expected for the H+ reduction for this new organic-inorganic electrode material in acid media. © 2011 Elsevier B.V. All rights reserved., Authors thank to the Spanish Ministerio de Ciencia y Tecnologia and European Union Funds (FEDER) (CTM2010-18842-C02-02) and Universitat Politecnica de Valencia (Programa de Apoyo a la Investigacion y Desarrollo de la UPV (PAID-06-10)) for the financial support. J. Molina is grateful to the Conselleria d'Educacio (Generalitat Valenciana) for the FPI fellowship. A.I. del Rio is grateful to the Spanish Ministerio de Ciencia y Tecnologia for the FPI fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Polyaniline coated conducting fabrics. Chemical and electrochemical characterization

  • Molina Puerto, Javier|||0000-0003-3378-8271
  • Bonastre Cano, José Antonio|||0000-0002-5068-6608
  • Cases, Francisco|||0000-0001-8105-4489
  • Esteves, M.F.
  • Fernández Sáez, Javier
Polyaniline coated conducting fabrics have been obtained by chemical oxidation of aniline by potassium peroxydisulfate on polyester fabrics. Two different acids have been employed to carry out the synthesis (HCl and H 2SO 4), obtaining the best results of conductivity with the latter one. The conducting fabrics have been characterized chemically by means of Fourier transform infrared spectroscopy with attenuated total reflection (FTIR-ATR), energy dispersive X-Ray (EDX) and X-ray photoelectron spectroscopy (XPS). The morphology of the coatings has been observed by means of scanning electron microscopy (SEM). The conducting properties of the fabrics have been measured by means of electrochemical impedance spectroscopy (EIS). The electrochemical characterization has been carried out by means of cyclic voltammetry (CV) and scanning electrochemical microscopy (SECM). The conducting fabrics have also shown electrochromic properties, changing its color from green yellowish at -1 V to dark green at +2 V. The durability of the coating has been evaluated by means of washing and rubbing fastness tests. © 2011 Elsevier Ltd. All rights reserved., Authors thank to the Spanish Ministerio de Ciencia e Innovacion and European Union Funds (FEDER) (contract CTM2010-18842-C02-02) and Universitat Politecnica de Valencia (Primeros Proyectos de Investigacion (PAID-06-10)) for the financial support. J. Molina is grateful to the Conselleria d'Educacio (Generalitat Valenciana) for the FPI fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Characterization of azo dyes on Pt and Pt/polyaniline/dispersed Pt electrodes

  • Molina Puerto, Javier|||0000-0003-3378-8271
  • Bonastre Cano, José Antonio|||0000-0002-5068-6608
  • Cases, Francisco|||0000-0001-8105-4489
  • Fernández Sáez, Javier
  • Del Río García, Ana Isabel
The electrochemical characterization of two organic dyes (amaranth and procion orange MX-2R) has been performed on Pt electrodes and Pt electrodes coated with polyaniline and dispersed Pt. Electrodes with different Pt loads have been synthesized and characterized obtaining that a load of 300 ¿g cm -2 was the optimum one. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) was employed to observe the distribution and morphology of the Pt nanoparticles. The electroactivity of the electrodes has also been characterized by means of scanning electrochemical microscopy (SECM). The chemical characterization of Pt dispersed Pani coated Pt electrodes (Pt-Pani-Pt) was performed by means of X-ray photoelectron spectroscopy (XPS). The electrochemical characterization of the dyes has been performed by means of cyclic voltammetry. Voltammograms have shown that the presence of the dyes diminishes characteristic Pt oxidation and reduction peaks. However, redox processes due to the dyes, appeared in the voltammograms. The different species responsible of these redox processes were generated in the vicinity of the electrode and were not adsorbed on the electrode surface since after stirring, the different redox processes disappeared. Characterization with different scan rates showed that redox processes of both dyes were controlled by diffusion. © 2012 Elsevier B.V., Authors thank to the Spanish Ministerio de Ciencia e Innovacion and European Union Funds (FEDER) (contracts CTM2010-18842-C02-02 and CTM2011-23583) and Universitat Politecnica de Valencia (Vicerrectorado de Investigacion PAID-06-10 contract 003-233) for the financial support. J. Molina is grateful to the Conselleria d'Educacio (Generalitat Valenciana) for the FPI fellowship. A.I. del Rio is grateful to the Spanish Ministerio de Ciencia y Tecnologia for the FPI fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of cell design and electrode materials on the decolouration of dyeing effluents

  • Sala, Mireia
  • Del Río García, Ana Isabel
  • Gutiérrez-Bouzán, M. C.
  • Molina Puerto, Javier|||0000-0003-3378-8271
  • Cases, Francisco|||0000-0001-8105-4489
[EN] Electrochemical techniques are applied in different textile processes, including wastewater treatment, as they are clean and generally operate at room temperature. In the current work, doped SnO2 electrodes (Ti/SnO2-Sb-Pt) were prepared. They were used as anodes in two electrochemical cells (simple batch mode and batch recirculation mode) to achieve the removal of two reactive azo dyes (Remazol Black 133B and Procion Yellow H-EXL) in synthetic dyeing effluents. With these electrodes, both cells exhibit similar decolouration rates. In addition, the doped SnO2 electrodes are compared with Ti/Pt electrodes in order to establish the influence of electrode material. They were applied to the treatment of four synthetic effluents containing one of the following reactive azo dyes: Remazol Black 133B, Procion Yellow H-EXL, Procion Crimson H-EXL and Procion Navy H-EXL. It was stated that the decolouration is faster with Ti/Pt anodes than with the doped SnO2 ones, but these last electrodes generate lower amount of chloroform during the electrolysis., The authors acknowledge the financial support of the Spanish Ministry of Economy and Competiveness (Projects CTM2007-66570-C02; CTM2010-18842-C02; CTM2011-23583) and ACC10-CIDEM/COPCA (Project J-04015).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Electrochemical synthesis of polyaniline on conducting fabrics of polyester covered with polypyrrole/PW12O403-. Chemical and electrochemical characterization

  • Molina Puerto, Javier|||0000-0003-3378-8271
  • Bonastre Cano, José Antonio|||0000-0002-5068-6608
  • Cases, Francisco|||0000-0001-8105-4489
  • Fernández Sáez, Javier
  • Del Río García, Ana Isabel
Polyaniline (Pani) has been electrochemically polymerized on conducting fabrics of polyester covered with polypyrrole/PW 12O 40 3-, obtaining a double conducting polymer layer. Electrochemical synthesis was performed by potentiostatic synthesis at 1 V. The chemical characterization of the material before and after Pani polymerization was performed by means of X-ray photoelectron spectroscopy (XPS), energy dispersive X-ray (EDX) and Fourier transform infrared spectroscopy (FTIR). The morphology of the coatings was observed employing scanning electron microscopy (SEM). The electrochemical characterization was performed by cyclic voltammetry (CV) and scanning electrochemical microscopy (SECM). It has been demonstrated that scan rate is an important parameter that influences the response obtained when characterizing conducting fabrics by CV. High scan rates do not allow the observation of redox peaks. However if lower scan rates are employed its apparition has been reported. The electrochemical deposit of polyaniline enhances the electroactivity of the material as it has been demonstrated by CV. SECM measurements showed local response with positive feedback (electroactive material) for the samples in open circuit conditions. XPS analysis also showed a higher doping level (N +/N), consistent with higher material electroactivity. © 2011 Elsevier B.V., Authors thank to the Spanish Ministerio de Ciencia y Tecnologia and European Union Funds (FEDER) (contract CTM2007-66570-C02-02 and CTM2010-18842-C02-02) and Universidad Politecnica de Valencia (Primeros Proyectos de Investigacion (PAID-06-10)) for the financial support. j. Molina is grateful to the Conselleria d'Educacio (Generalitat Valenciana) for the FPI fellowship. A.I. del Rio is grateful to the Spanish Ministerio de Ciencia y Tecnologia for the FPI fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Electrochemical characterization of reduced graphene oxide-coated polyester fabrics

  • Molina Puerto, Javier|||0000-0003-3378-8271
  • Bonastre Cano, José Antonio|||0000-0002-5068-6608
  • Cases, Francisco|||0000-0001-8105-4489
  • Fernández Sáez, Javier
  • Inés Vilches, Juan Carlos
  • Del Río García, Ana Isabel
Reduced graphene oxide (RGO) coated fabrics were obtained by chemical reduction of GO on polyester (PES) fabrics. Conducting fabrics that have different applications were obtained by applying several layers of RGO. Electrochemical techniques not traditionally used for the characterization of these materials were used to test their electrical and electrochemical properties. Electrochemical impedance spectroscopy was used to measure the electrical properties. The resistance of the original PES was more than 10(11) Omega cm(2), but when coated with three RGO layers, the resistance decreased to 23.15 Omega cm(2). Phase angles changed from 90 degrees for PES and PES-GO (capacitative behavior) to 0 degrees for all the RGO coated samples (resistive behavior). Electro-activity was measured by cyclic voltammetry (CV) and scanning electrochemical microscopy. An increase in electro-activity was observed when the inactive GO was reduced to RGO. With CV an increase of electro-activity was observed with an increasing number of RGO layers. The contact between the different RGO sheets is responsible for the electric conduction in the fabrics. The techniques used showed that with only one RGO coating, the contact between the RGO sheets is not good and more coatings were needed to assure good electrical and electrochemical properties. (C) 2013 Elsevier Ltd. All rights reserved., The authors wish to thank the Spanish Ministerio de Ciencia e Innovacion (contracts CTM2010-18842-C02-02 and CTM2011-23583) and Universitat Politecnica de Valencia (Vicerrectorado de Investigacion PAID-06-10 contract 003-233) for their financial support. J. Molina is grateful to the Conselleria d'Educacio, Formacio i Ocupacio (Generalitat Valenciana) for the Programa VALi+D post-doctoral fellowship. A.I. del Rio is grateful to the Spanish Ministerio de Ciencia y TecnologRia for the FPI fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhanced adhesion of polypyrrole/PW12O403- hybrid coatings on polyester fabrics

  • Molina Puerto, Javier|||0000-0003-3378-8271
  • Bonastre Cano, José Antonio|||0000-0002-5068-6608
  • Cases, Francisco|||0000-0001-8105-4489
  • Oliveira, F. R.
  • Souto, A. P.
  • Esteves, M. F.
[EN] Polyester fabrics have been treated with plasma to increase polypyrrole/PW12O403-(hybrid material) adhesion to its surface. With the plasma treatment, the roughness of the fibers increases as it has been observed by means of atomic force microscopy (AFM). Polar functional groups are also created on the surface of polyester fabrics as Xray photoelectron spectroscopy (XPS) measurements have shown. These polar groups contribute to the adhesion of polypyrrole to the fibers. Coatings obtained on plasma treated fabrics were more resistant to washing and rubbing fastness tests. The use of an inorganic counter ion (PW12O40 3-) that contains an element with a high atomic number (W) helps to locate zones where the coating is missed; this is achieved by means of micrographs obtained by backscattered electrons (BSE). The electrical resistance of the fabrics was also measured by electrochemical impedance spectroscopy (EIS), obtaining also better results with the plasma treated fabrics., Authors thank to the Spanish Ministerio de Ciencia e Innovacion (contracts CTM2010-18842-C02-02 and CTM2011-23583) and Universitat Politecnica de Valencia (Primeros Proyectos de Investigacion (PAID-06-10)) for the financial support. J. Molina is grateful to the Conselleria d'Educacio (Generalitat Valenciana) for the FPI fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Synthesis of PPy/PW12O403- organic-inorganic hybrid material on polyester yarns and subsequent weaving to obtain conductive fabrics

  • Romero, Eduardo
  • Del Río García, Ana Isabel
  • Molina Puerto, Javier|||0000-0003-3378-8271
  • Bonastre Cano, José Antonio|||0000-0002-5068-6608
  • Cases, Francisco|||0000-0001-8105-4489
In this paper, we study the morphological, chemical and electrochemical characteristics of conductive fabrics obtained by weaving conductive yarns of polyester chemically coated with PPy (polypyrrole)/PW12O403-. The weaving process allows us to obtain conductive fabrics with higher dimensions than those traditionally obtained by in-situ chemical oxidation methods. Untwisted yarns and satin fabrics produced the most satisfactory results. The yarns of PES - PPy/PW12O403- as well as the fabric obtained after weaving, were chemically characterized by means of Fourier transform infrared spectroscopy with attenuated total reflection and energy dispersive X-ray. Scanning electron microscopy was employed to observe the morphology of the coating as well as the formation of defects during the weaving process. Electrochemical impedance spectroscopy was employed to measure the conductivity of the fabrics and the conductive nature by means of the phase angle. The process was satisfactory since the coating of polypyrrole was not excessively damaged by the weaving process, This work was supported by the Spanish Ministerio de Ciencia y Tecnologia and European Union Funds (FEDER) (grant number CTM2010-18842-C02-02); and Universidad Politecnica de Valencia (grant number PAID-06-10).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Tratamiento electroquímico de colorantes bifuncionales tipo Hexl en una célula filtro prensa, Electrochemical treatment of bifunctional dyes in a filter press reactor

  • Del Río García, Ana Isabel
  • Orts Maiques, Francisco José|||0000-0001-8254-8042
  • Molina Puerto, Javier|||0000-0003-3378-8271
  • Bonastre Cano, José Antonio|||0000-0002-5068-6608
  • Cases, Francisco|||0000-0001-8105-4489
[EN] In the present work, the electrochemical treatment of reactive bifunctional dyes is investigated. The selected dyes correspond to the tricromy HEXL. These dyes present two azo groups as chromophore groups and two monochlorotriazinic groups as reactive groups. This study has been carried out in two parts: in the fi rst part, synthetic solutions containing just one of these dyes, Procion HEXL, were studied (Solution (1)). Previous investigations have demonstrated that the best process to carry out this study is the oxidoreduction at 125 mA cm-2. Following to this fi rst part, the same study in the same working conditions was performed with solutions containing the three dyes of the tricromy H-EXL (Procion Yellow HEXL, Procion Crimson HEXL and Procion Navy HEXL). In this last case, the concentrations were selected considering the concentrations found in real effluents. In order to evaluate the decoloration/mineralization obtained, Total Organic Carbon (TOC) and the Chemical Oxygen Demand (COD) were measured. These parameters allowed to know the Average Oxidation State (AOS) after each electrolysis and the effi ciency at which the process takes place by means of calculating the Carbon Oxidation State (COS) and The Average Current Effi ciency (ACE). The UV-Visible spectroscopy permitted to observe the decoloration differences between the initial and fi nal stage. Moreover, the High Performance Liquid Chromatography (HPLC) gave information about the intermediates generated as well as the decoloration kinetics., [ES] En el presente trabajo se ha investigado el comportamiento electroquímico de colorantes reactivos bifuncionales. Los colorantes seleccionados son los correspondientes a la tricromía HEXL. Estos colorantes presentan dos grupos azo como cromóforos y dos grupos monoclorotriazínico como grupos reactivos. El estudio consta de dos partes: inicialmente, se han estudiado disoluciones sintéticas que contienen únicamente uno de estos colorantes, el Procion Yellow HEXL (Disolución 1). Investigaciones anteriores han demostrado que el proceso de oxido-reducción a 125 mA cm-2 es el que presenta mejores resultados. Posteriormente, se trasladó este estudio, en las mismas condiciones de trabajo, a disoluciones que contienen una mezcla de los tres colorantes correspondientes a la tricromía HEXL (Procion Yellow HEXL , Procion Crimson HEXL y Procion Navy HEXL) adaptando las concentraciones a condiciones reales (Disolución 2). Esta investigación se ha centrado en evaluar el grado de decoloración/mineralización mediante medidas de Carbono Orgánico Total (COT) y Demanda Química de Oxígeno (DQO). Esto ha permitido conocer el Estado de Oxidación Promedio (EOP) tras cada electrólisis además de la eficiencia en cada caso mediante análisis del Estado de Oxidación del Carbono (EOC) y Eficiencia en Corriente Promedio (ECP). La Espectroscopía UV-Visible ha permitido observar las diferencias de decoloración entre el estado inicial y final en todos los casos. Además, la Cromatografía Líquida de Alta Resolución (HPLC) ha permitido conocer la evolución de los intermedios generados así como la cinética de decoloración., Los autores desean agradecer agradecimiento al Ministerio de Ciencia e Innovación y los Fondos de la Unión Europea (FEDER) la financiación proporcionada (CTM2010-18842-C02-02 y CTM 2011-23583).