Pasar al contenido principal

UTILIZACION DE CO2 CAPTURADO PARA OBTENCION DE METANOL CON UN REACTOR PSA

CTM2017-84033-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD COMPLUTENSE DE MADRID

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

Docta Complutense
Publicación Artículo científico (JournalArticle)

Separation of the propane propylene mixture with high recovery by a dual PSA process

  • Delgado Dobladez, José Antonio
  • Águeda Maté, Vicente Ismael
  • Álvarez Torrellas, Silvia
  • Larriba Martínez, Marcos
Propylene is a very important raw material in the petrochemical industry. A key step in its production is propane/propylene separation, where energy consumption and the degree of propylene recovery achieved have a strong impact on the economy of the process. A Dual PSA process has been designed for the separation of a 50:50 molar propane/propylene mixture using zeolite 13X as adsorbent. Kinetic and equilibrium adsorption parameters reported in the literature (Da Silva, F.A., Rodrigues A.E., 2001. AIChE J. 47, 341–57) have been used. The process can produce polymer-grade propylene (purity > 99.5%) with recovery higher than 99.5%, which is above the recovery achieved in other PSA processes studied in the literature for an equimolar propane/propylene mixture. Energy consumption is 38% lower than required by conventional distillation.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Influence of sodium and potassium proportion on the adsorption of methanol and water on LTA zeolites at high temperature

  • Pascual Muñoz, Gonzalo
  • Larriba Martínez, Marcos
  • Águeda Maté, Vicente Ismael
  • Delgado Dobladez, José Antonio
  • Calero Berrocal, Rubén
Catalytic hydrogenation of CO2 or CO, obtained from biomass gasification, is the most used technology to produce renewable methanol. The main problem is that the reactions are controlled by equilibrium, achieving low conversions to methanol, leading to high purification costs and reagent recirculation rates. At 250 °C and 50 bar, the equilibrium conversion of CO2 is around 25%, and methanol selectivity is about 64%. The process can be improved by a sorption-enhanced reaction process (SERP), removing the reaction products in situ and overcoming the equilibrium. To carry out the process, adsorbents with high affinity to the products at high temperatures, like LTA zeolites, are required. Experimental data on methanol and water adsorption at reaction temperatures is quite scarce in the literature, and it is usually assumed that methanol is not adsorbed onto 4A and 3A zeolites. This information is required to design a SERP process with this adsorbent. In this work, the influence of sodium and potassium proportion on the adsorption of methanol and water on LTA zeolites is studied by measuring Henry's adsorption equilibrium constants and reciprocal diffusion time constants. Sodium LTA zeolites (4A) strongly adsorb water and methanol. Potassium-rich LTA zeolites (3A) have higher water/methanol selectivity than sodium-rich LTA zeolites.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Potential of CO2 capture from flue gases by physicochemical and biological methods: A comparative study

  • Matito Martos, Ismael
  • Sepúlveda, Claudia
  • Gómez, Cintia
  • Acién, Gabriel
  • Pérez Carbajo, Julio
  • Delgado Dobladez, José Antonio
  • Águeda Maté, Vicente Ismael
  • Ania, Conchi
  • Parra, José B.
  • Calero, Sofia
  • Anta, Juan A.
We compare the industrial viability of two emerging technologies for CO2 capture from flue gases, i.e., adsorption in porous commercial zeolites and biomass production by microalgae. Our study is organized in two steps: first, the best system is selected (either zeolite type or microalgae strain). Second, their performance is quantified and their advantages at real conditions discussed. For the physicochemical process, we find that commercial zeolite MFI is the best choice for CO2 capture from a typical industrial flue gas emission. Numerical dual PSA cycle simulations at ambient conditions yield 8 kg m−3 bed h−1 and an energy consumption of 0.987 MJ per kg of captured CO2. As regards the biological process, evaluation of several microalgae strains in continuous mode using low-cost resources (waste water, fertilizers, flue gases), results in Scenedesmus almeriensis as the most promising strain. The maximal capacity of CO2 capture at laboratory conditions was 0.1 kg m−3h−1, allowing to produce up to 0.06 of kg m−3h−1 of biomass (3% maximal photosynthetic efficiency). Although this is a significantly lower value, the produced biomass, being composed by carbohydrates, entails an overall economic yield of 0.6 € m−3·day. To demonstrate reliability at large scale, experiments were performed in a 100 m2 pilot raceway reactor under outdoor conditions. We measured 54 g of CO2/m2·day (=197 tn/ha·year) and a biomass productivity of 21 g/m2·day (=75 tn/ha·year). The energy consumption approaches to 0.48 MJ/kgCO2, lower than zeolites adsorption. Still, zeolites can be advantageous as they offer higher productivity, lower energy consumption than amines-based methods, and possibility of producing added-value chemical products, such as methanol, CO or CH4.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Efficient recovery of syngas from dry methane reforming product by a dual pressure swing adsorption process

  • Delgado Dobladez, José Antonio
  • Águeda Maté, Vicente Ismael
  • Álvarez Torrellas, Silvia
  • Larriba Martínez, Marcos
  • Brea, Pablo
In recent years, there has been growing interest in the dry reforming of methane (using CO2 instead of H2O) to obtain syngas, due to its economic and environmental advantages. In this reaction, to achieve conversions close to 100%, it is necessary to work at temperatures higher than 1000 °C. However, to attenuate the catalyst deactivation by sintering is convenient to work at lower temperatures, so that normally the syngas (mixture CO + H2) is obtained mixed with unreacted CO2 and CH4. In this work a process has been simulated to recover the syngas from the product of a dry reforming reaction of methane at 700 °C by means of a Dual PSA (Dual Pressure Swing Adsorption) process with heavy reflux using BPL activated carbon as an adsorbent, operating at 25 °C. The process can recover syngas with purity and recovery higher than 99%. Unreacted CO2 and CH4 can be recycled to the reactor, leading to effective CO2 and CH4 conversions close to 100%. The process specific energy input (SEI) is 4.7 thermal kJ per L (STP) of syngas. The process can also be used to recover the syngas contained in the tail gas of a H2 purification PSA from SMR-off gas.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Experimental PSA reactor for methanol-enhanced production via CO2 hydrogenation

  • Pascual Muñoz, Gonzalo
  • Calero Berrocal, Rubén
  • Larriba Martínez, Marcos
  • Águeda Maté, Vicente Ismael
  • Delgado Dobladez, José Antonio
Methanol synthesis via catalytic CO2 hydrogenation has emerged as one of the main ways to valorize CO2. The main problem is that the methanol synthesis reaction is thermodynamically controlled, and there is a parallel endothermic reaction, reverse water gas shift (RWGS), so low methanol production ratios are achieved. In this scenario, process intensification, particularly multifunctional reactors where reaction and separation occur simultaneously, is of great interest. Sorption-enhanced reaction processes (SERP) technologies are widely used in equilibrium-controlled processes to increase reagent conversion through selective product removal. Various authors have proposed SERP processes for CO2 hydrogenation to methanol, but most of them are simulations studies and it is difficult to find experimental data. The aim of the work is the experimental study of the CO2 conversion and selectivity to methanol of a SERP process based on a four-step PSA reactor. The process has been carried out with a commercial Cu/ZnO/Al2O3 catalyst and commercial 3A zeolite as adsorbent. Conversions beyond the equilibrium have been achieved in the SERP process, even complete conversion of CO2 at 50 bar, 250 °C, and 300 °C. In the cyclic process, high CO2 conversions far from equilibrium are achieved in all the range of temperatures, 200–300 °C. The best results of methanol yield are achieved at 250 °C and 50 bar, followed closely by 200 °C. It is worth mentioning that methane is detected in the transitory state at 300 °C and 50 bar. Also, the purge step has been studied, concluding that it is necessary for adsorbent regeneration, improving CO2 conversion in the cyclic steady state
Docta Complutense
Publicación Artículo científico (JournalArticle)

Recovery of a Succinic, Formic, and Acetic Acid Mixture from a Model Fermentation Broth by Simulated Moving Bed Adsorption with Methanol as a Desorbent

  • Delgado Dobladez, José Antonio
  • Águeda Maté, Vicente Ismael
  • Álvarez Torrellas, Silvia
  • Larriba Martínez, Marcos
  • Uribe Santos, Dora Lucía
This work aims to study the recovery of succinic acid, formic acid, and acetic acid from a model fermentation broth by adsorption using a commercial polyvinylpyridine (PVP) resin (Reillex 425), with methanol as the desorbent. A theoretical model has been developed to describe the adsorption/desorption dynamics of succinic acid/water, formic acid/water, and succinic acid/formic acid/acetic acid/glucose/methanol/water mixtures in a fixed bed of commercial resin. The model has been used to design and optimize a simulated moving bed process to recover acids from a model fermentation broth using the triangle theory and volume separation method. It is possible to recover 95% of the acids, with 99.9% purity, with a productivity of 24.737 kg msolid–3 h–1 and a desorbent consumption of 0.0901 m3 kg–1. The acids are obtained free of water-soluble impurities and water, mixed with methanol, and can be subsequently separated or used directly in esterification processes with methanol.
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Sustainable production of furfural in biphasic reactors using terpenoids and hydrophobic eutectic solvents

  • Cañada-Barcala, Andrés
  • Rodríguez-Llorente, Diego
  • López, Laura
  • Navarro, Pablo
  • Hernández, Elisa
  • Águeda, V. Ismael
  • Álvarez-Torrellas, Silvia
  • Parajó Liñares, Juan Carlos
  • Rivas Siota, Sandra
  • Larriba, Marcos
Furfural comes from lignocellulosic biomass that, together with its derived products, has many useful applications in several industries. Furfural is usually obtained via pentose dehydration using a biphasic reactor to extract furfural in situ from its reaction medium. However, the conventional solvents used so far, mainly toluene and methyl isobutyl ketone (MIBK), are harmful to health and the environment. Therefore, hydrophobic natural solvents have been successfully tested in this work to improve the performance of the process from a sustainable point of view. First, 30 natural solvents were screened using the conductor-like screening model for real solvents (COSMO-RS) method to select solvents with high affinity to furfural. From the results obtained in the screening, 14 natural and 2 conventional solvents were selected for experimentation, including thymol, eugenol, toluene, MIBK, and several hydrophobic eutectic solvents formed by thymol. Then, the liquid–liquid extraction of furfural was carried out both in vials and in a reactor, simulating the usual temperature and pH conditions for obtaining furfural. Thymol and eugenol showed extraction yields of 95 and 91%, significantly higher than those of conventional solvents MIBK and toluene, which were 85 and 81%, respectively. Finally, the in situ reaction and extraction of furfural from xylose were performed using the natural solvents eugenol and thymol and the conventional solvent MIBK. Under operating conditions, namely, microwave heating to 443.2 K, 10 min of reaction, and a solvent-to-feed ratio of 1.00, xylose conversion of 96.7%, furfural selectivity of 75.3%, and a furfural production yield of 72.8% from xylose were obtained using eugenol as the organic solvent, with improved outcomes over MIBK and thymol cases, pointing an adequate approach to improve both the effectiveness and the sustainability of the process., Comunidad de Madrid | Ref. P2018/EMT-4341, Comunidad de Madrid | Ref. PR65/19-22441, Universidad Complutense de Madrid | Ref. PR65/19-22441, Agencia Estatal de Investigación | Ref. CTM2017-84033-R, Ministerio de Ciencia, Innovación y Universidades | Ref. FPU18/01536, Ministerio de Ciencia, Innovación y Universidades | Ref. FPU19/01451, Ministerio de Ciencia, Innovación y Universidades | Ref. IJC2018-037665-I
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Potential of CO2 capture from flue gases by physicochemical and biological methods: A comparative study

  • Matito-Martos, Ismael
  • Sepúlveda, Claudia
  • Gómez, Cintia
  • Acién, Gabriel
  • Pérez-Carbajo, Julio
  • Delgado, José Antonio
  • Águeda, V. I.
  • Ovín Ania, María Concepción
  • Parra Soto, José Bernardo
  • Calero, Sofía
  • Anta, Juan A.
We compare the industrial viability of two emerging technologies for CO2 capture from flue gases, i.e., adsorption in porous commercial zeolites and biomass production by microalgae. Our study is organized in two steps: first, the best system is selected (either zeolite type or microalgae strain). Second, their performance is quantified and their advantages at real conditions discussed. For the physicochemical process, we find that commercial zeolite MFI is the best choice for CO2 capture from a typical industrial flue gas emission. Numerical dual PSA cycle simulations at ambient conditions yield 8 kg m−3 bed h−1 and an energy consumption of 0.987 MJ per kg of captured CO2. As regards the biological process, evaluation of several microalgae strains in continuous mode using low-cost resources (waste water, fertilizers, flue gases), results in Scenedesmus almeriensis as the most promising strain. The maximal capacity of CO2 capture at laboratory conditions was 0.1 kg m−3h−1, allowing to produce up to 0.06 of kg m−3h−1 of biomass (3% maximal photosynthetic efficiency). Although this is a significantly lower value, the produced biomass, being composed by carbohydrates, entails an overall economic yield of 0.6 € m−3·day. To demonstrate reliability at large scale, experiments were performed in a 100 m2 pilot raceway reactor under outdoor conditions. We measured 54 g of CO2/m2·day (=197 tn/ha·year) and a biomass productivity of 21 g/m2·day (=75 tn/ha·year). The energy consumption approaches to 0.48 MJ/kgCO2, lower than zeolites adsorption. Still, zeolites can be advantageous as they offer higher productivity, lower energy consumption than amines-based methods, and possibility of producing added-value chemical products, such as methanol, CO or CH4., This study was carried out with the financial support of Junta de Andalucía, grant FQM 1851 and the company, SETEC. We are grateful for the practical assistance kindly given by the staff of the Las Palmerillas Experimental Station, part of the Cajamar Foundation. Financial support from the Ministry of Economy and Competitiveness of Spain through project CTM2017-84033-R is gratefully acknowledged., Peer reviewed
Docta Complutense
Publicación Artículo científico (JournalArticle)

Comparative simulation study of methanol production by CO2 hydrogenation with 3A, 4A and 5A zeolites as adsorbents in a PSA reactor

  • Delgado Dobladez, José Antonio
  • Águeda Maté, Vicente Ismael
  • Álvarez Torrellas, Silvia
  • Larriba Martínez, Marcos
  • Pascual Muñoz, Gonzalo
  • Alberola Sánchez, Raúl
In this work, the performance of 3A, 4A and 5A zeolites in a PSA reactor to obtain methanol by CO2 hydrogenation has been compared by numerical simulation. Henry's constants of adsorption and the reciprocal diffusion time constants of water and methanol in these adsorbents have been measured in the reaction temperature range (200–350 °C) to simulate their performance using a zeolite/Cu-ZnO-Al2O3 catalyst mixture. A new cycle has been proposed for PSA reactors including a complete recirculation of heavy product, without using a purge. The best performance is obtained with 3A zeolite, having the lower water and methanol affinities facilitating bed regeneration. With the proposed process, methanol can be produced from CO2 hydrogenation at 250 °C and 50 bar with a conversion of 99.6% in one step, a selectivity of 83–96%, and productivities of 0.023–0.13 mol m3 s−1. The process has minimal loss of H2 in the form of water (1 mol H2O/mole converted CO2).