Pasar al contenido principal

Medios acuosos modificados para biorrefinerías de maderas

IJC2018-037665-I

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i
Subprograma Subprograma Estatal de Incorporación
Convocatoria Juan de la Cierva Incorporación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE VIGO

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Sustainable production of furfural in biphasic reactors using terpenoids and hydrophobic eutectic solvents

  • Cañada-Barcala, Andrés
  • Rodríguez-Llorente, Diego
  • López, Laura
  • Navarro, Pablo
  • Hernández, Elisa
  • Águeda, V. Ismael
  • Álvarez-Torrellas, Silvia
  • Parajó Liñares, Juan Carlos
  • Rivas Siota, Sandra
  • Larriba, Marcos
Furfural comes from lignocellulosic biomass that, together with its derived products, has many useful applications in several industries. Furfural is usually obtained via pentose dehydration using a biphasic reactor to extract furfural in situ from its reaction medium. However, the conventional solvents used so far, mainly toluene and methyl isobutyl ketone (MIBK), are harmful to health and the environment. Therefore, hydrophobic natural solvents have been successfully tested in this work to improve the performance of the process from a sustainable point of view. First, 30 natural solvents were screened using the conductor-like screening model for real solvents (COSMO-RS) method to select solvents with high affinity to furfural. From the results obtained in the screening, 14 natural and 2 conventional solvents were selected for experimentation, including thymol, eugenol, toluene, MIBK, and several hydrophobic eutectic solvents formed by thymol. Then, the liquid–liquid extraction of furfural was carried out both in vials and in a reactor, simulating the usual temperature and pH conditions for obtaining furfural. Thymol and eugenol showed extraction yields of 95 and 91%, significantly higher than those of conventional solvents MIBK and toluene, which were 85 and 81%, respectively. Finally, the in situ reaction and extraction of furfural from xylose were performed using the natural solvents eugenol and thymol and the conventional solvent MIBK. Under operating conditions, namely, microwave heating to 443.2 K, 10 min of reaction, and a solvent-to-feed ratio of 1.00, xylose conversion of 96.7%, furfural selectivity of 75.3%, and a furfural production yield of 72.8% from xylose were obtained using eugenol as the organic solvent, with improved outcomes over MIBK and thymol cases, pointing an adequate approach to improve both the effectiveness and the sustainability of the process., Comunidad de Madrid | Ref. P2018/EMT-4341, Comunidad de Madrid | Ref. PR65/19-22441, Universidad Complutense de Madrid | Ref. PR65/19-22441, Agencia Estatal de Investigación | Ref. CTM2017-84033-R, Ministerio de Ciencia, Innovación y Universidades | Ref. FPU18/01536, Ministerio de Ciencia, Innovación y Universidades | Ref. FPU19/01451, Ministerio de Ciencia, Innovación y Universidades | Ref. IJC2018-037665-I
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Arundo donax L processing in catalyzed butanol–water media in the scope of lignocellulose biorefineries

  • Rivas Siota, Sandra
  • Baldassari, Rebecca
  • Parajó Liñares, Juan Carlos
  • Raspolli Galletti, Anna M.
Arundo donax L samples, before or after aqueous extraction to remove extractives, were subjected to chemical fractionation in H2SO4-catalyzed mixtures of 1-butanol and water. The partial miscibility of 1-butanol and water at room temperature allowed the separation of the three major feedstock components in separate streams (lignin, accumulated in the 1-butanol-rich phase; hemicellulose-derived products, accumulated in the aqueous acidic phase; and cellulose, present in the solid phase). The effects of selected variables (temperature, catalyst concentration, reaction time and 1-butanol content of the reaction media) on variables measuring the solid recovery yield and the compositions of phases from fractionation were measured. Using water-extracted A. donax L as a substrate, the best operational conditions enabled 93.2% hemicellulose removal and 85.4% delignification with limited cellulose solubilization (15%). The experimental results provided key information to assess the proposed process in the scope of biorefineries., Ministerio de Ciencia e Innovación | Ref. IJC2018-037665, Ministerio de Ciencia e Innovación | Ref. PID2020-116717RB-I00, Ministerio de Ciencia e Innovación | Ref. RYC2021-031964-I
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Single-stage fractionation of vine shoots using microwave heating

  • Rivas Siota, Sandra
  • Parajó Liñares, Juan Carlos
Vine shoots are agricultural residues that can be used as a raw material in agro-biorefineries, in which their main constituents can be individually converted into valuable bioproducts. The treatment of vine shoots in uncatalyzed media containing water and 1-butanol enabled the single-stage separation of the major vine shoots constituents in different phases: the aqueous phase from treatments contained hemicellulose-derived products (mainly in the form of oligosaccharides), the organic phase accumulated the dissolved lignin, and the cellulosic fraction was recovered in solid phase. The aqueous phase from treatments was refined using membranes and processed with enzymes to obtain a refined product (RP) containing 92.2 g of oligosaccharides/100 g of non-volatile compounds. The oligosaccharides were mainly composed of anhydroxylose units substituted by acetyl and uronic groups. Enzymatic hydrolysis of RP with endo-xylanases reduced the average degree of polymerization to 2–3, which are preferred for application as healthy food ingredients. The solid phase from treatments was used as a substrate for enzymatic hydrolysis, enabling the production of solutions containing 34.9 g glucose /L and 4.2 g xylose /L., Deputación de Ourense | Ref. INOU20-03A, Ministerio de Ciencia, Innovación y Universidades | Ref. IJC2018-037665-I
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Advances on cellulose manufacture in biphasic reaction media

  • Fernández Bautista, Marcos
  • Martínez Gómez, Sergio
  • Rivas Siota, Sandra
  • Alonso González, José Luis
  • Parajó Liñares, Juan Carlos
Cellulose is produced industrially by the kraft and sulfite processes. The evolution of these technologies in biorefineries is driven by the need to obtain greater added value through the efficient use of raw materials and energy. In this field, organosolv technologies (and within them, those using liquid phases made up of water and one partly miscible organic solvent, known as “biphasic fractionation” in reference to the number of liquid phases) represent an alternative that is receiving increasing interest. This study considers basic aspects of the composition of lignocellulosic materials, describes the fundamentals of industrial cellulose pulp production processes, introduces the organosolv methods, and comprehensively reviews published results on organosolv fractionation based on the use of media containing water and an immiscible solvent (1-butanol, 1-pentanol or 2-methyltetrahydrofuran). Special attention is devoted to aspects related to cellulose recovery and fractionation selectivity, measured through the amount and composition of the treated solids., Ministerio de Ciencia e Innovación | Ref. IJC2018-037665, Ministerio de Ciencia e Innovación | Ref. PRE2021-098927, Ministerio de Ciencia e Innovación | Ref. PID2020-116717RB-I00, Xunta de Galicia | Ref. GRC-ED431C 2022/08, Ministerio de Ciencia e Innovación | Ref. RYC2021-031964-I