Pasar al contenido principal

SINTESIS EN UNA SOLA ETAPA DE COMPUESTOS NITROGENADOS A PARTIR DE POLIALCOHOLES DERIVADOS DE LA BIOMASA EMPLEANDO MATERIALES NANO-STRUCTURADOS

CTQ2008-06446

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2008
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Pt and Pd nanoparticles supported on structured materials as catalysts for the selective reductive amination of carbonyl compounds

  • Domine, Marcelo Eduardo
  • Navarro Villalba, Mª Teresa|||0000-0001-5012-8414
  • Hernández-Soto, M. Consuelo
  • Pérez, Yolanda
[EN] Metal catalysts based on Pt and Pd nano-particles supported on structured microporous Beta zeolites and mesoporous MCM-41 materials, as well as specially designed gamma-Al(2)O(3) samples, were synthesized following a simple and economic procedure. Physico-chemical characterization of metal-composites (by XRD, IR spectroscopy, TEM, N(2) adsorption, ICP, among others) indicated that both Pt and Pd nano-particles were adequately supported and homogeneously dispersed on supports. These metal/solid acid composites were applied as efficient catalysts under mild reaction conditions in the selective reductive amination of ketones, a useful industrial reaction for the synthesis of substituted amines and N-heterocycles. Results obtained showed that Pt/Al-Beta catalyst possesses the best catalytic activity (TON = 1610, with amine selectivities >95%) superior to that observed with commercial Pt/C and Pt/Al(2)O(3) (TON approximate to 1000). Enhancements in Pt/Al-Beta samples were achieved by optimizing the Pt loading, and mainly the Si/Al molar ratio in solids. On the contrary, inferior catalytic activities were encountered with the Pt/Si-MCM-41 and Pt/Al-MCM-41 materials. The Pd incorporation on MCM-41 materials produced more active catalysts than the commercial Pd/C and Pd/Al(2)O(3) samples. Finally, the study of Pt/ and Pd/gamma-Al(2)O(3) materials demonstrated that the treatments of support prior to the metal impregnation and the posterior calcinations processes were essentials to obtain efficient catalysts. (C) 2011 Elsevier B.V. All rights reserved., Financial support by Ministerio de Ciencia e Innovación (MICINN) of Spain (CTQ-2008-06446), CSIC (PIE-200980I063), and COST Action CM0903 (UBIOCHEM) is gratefully acknowledged. Authors also thank M.Arribas for help in adsorption measurements.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Development of metal nanoparticles supported materials as efficient catalysts for reductive amination reactions using high-throughput experimentation

  • Domine, Marcelo Eduardo
  • Hernández Soto, María Consuelo
  • Perez, Yolanda
[EN] Substituted amines and N-heterocycles, useful intermediates in industry, can be synthesized by reductive amination of ketones with amines in the presence of metal supported catalysts. In this work, multi-functional catalysts based on Pt, Pd, and Au nanoparticles supported on different metal oxides capable to efficiently catalyze the liquid phase selective reductive amination of ketones have been developed. Catalytic screening performed by HT experimentation showed that Pt-catalysts are more active than the corresponding Pd counterparts, while Au-based materials present very low activities. Excellent results were obtained with Pt/TiO(2) (52% of amine conversion with selectivity >95%, TON = 2033) followed by Pt/MgO, Pt/CaO, and also Pt/Al(2)O(3). Increase in the reduction temperature pre-treatment of Pt-catalysts improved the catalytic activities (approximate to 65% of amine conversion with selectivity >95%, TON = 2541 for Pt/TiO(2)), these values being quite superior to those observed with Pt/C and Pt/Al(2)O(3) commercial catalysts. With the appropriate treatment of support prior to metal impregnation efficient Pt/Al(2)O(3) materials can also be obtained (TON = 1685). The results suggest that Pt and Pd catalysts activities can be enhanced by appropriate tailoring the physical and chemical properties of oxide supports depending on the type of metal, this favouring a strong metal-support interaction (SMSI) on solids. (C) 2010 Elsevier B.V. All rights reserved., Authors gratefully acknowledge financial support by Generalitat Valenciana (GVPRE-2008-109) and Ministerio de Ciencia e Innovación of Spain (CTQ-2008-06446).