Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Synthesis of furan derivatives via cascade-type reactions catalyzed by solid acids

  • Chávez Sifontes, Marvin Horacio
  • Domine, Marcelo Eduardo
  • Valencia Valencia, Susana|||0000-0001-7160-2795
The 2-methylfuran (2-MF), easily obtained from furfural as a lignocellulosic biomass derivative, can beconverted in good yields (70%) into 5,5-bis(5-methyl-2-furyl)pentan-2-one by condensation in the pres-ence of mineral acids. This molecule is an important precursor for various interesting industrial products,such as benzofuranics with physiological activity and hydrocarbon mixtures useful as fuel components. Inthis work, the synthesis of 5,5-bis(5-methyl-2-furyl)pentan-2-one was successfully achieved (yield = 80%)via hydrolysis/condensation of 2-methylfuran, by using ethanol/water as solvent and Amberlyst®15 as asolid catalyst under moderate reaction conditions. Different polymeric ionic exchange resins were tested,conversion of 2-MF and product performances during reaction showed a proportional dependence tothe capacity of proton exchange of resins. Amberlyst®15 presented the best results, and the resin canbe regenerated and reused several times arriving to a constant product yield after the 3rd 4th reuse.Results attained for different zeolites tested indicate that 2-MF conversion appears to be function of poresize and channels structure of zeolite. These catalysts produced low yields of desired product mainly dueto deactivation by the retention of intermediate reactions and products on the surface and inside pores.The use of H-Beta (F−) catalyst presenting a more hydrophobic surface could partially minimize catalyticdeactivation., Financial support by Ministerio de Ciencia e Innovacion (MICINN) of Spain (CTQ-2011-27550), Conselleria d'Educacio Generalitat Valenciana (ACOMP2011-0160), and COST Action CM0903 (UBIOCHEM) is gratefully acknowledged. M.H. Chavez-Sifontes also thanks MAE-AECID and ITQ for supporting fellowships.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Sustainability Metrics for Succinic Acid Production: A Comparison between Biomass-based and Petrochemical Routes

  • Pinazo De la Cruz, José Miguel
  • Parvulescu, Vasile
  • Petru, Filip
  • Domine, Marcelo Eduardo
Biomass-derived succinic acid (Bio-SA) has been described as a strategic platform chem., due to its potential as the C4 building block in industrial org. chem. Sustainability of SA prodn. via fermentative synthesis was studied through two different processes (Myriant and Reverdia cases) and compared with the corresponding petrochem. route. Four groups of parameters, namely material efficiency, economics, energy efficiency and land use were considered. Green metrics results show that energy efficiency for Bio-SA prodn. is slightly higher while material efficiency is rather lower when compared with the petrochem. counterpart. Remarkably, Bio-SA calcd. costs (»1040euro/MT in the worse case) are quite lower than the actual prices for Petr.SA and close to the price of maleic anhydride used as raw material. Thus, bio-based SA prodn. appears to be competitive with petrochem. route for MAN. Competitiveness of Bio-SA can be boosted by optimization of fermentative process, as well as by the Bio-SA upgrading to high added value chems., The authors acknowledge UBIOCHEM COST Action CM0903. M.E.D thanks the Ministerio de Ciencia e Innovacion of Spain (MICINN, CTQ2011-27550; and MICINN-CSIC, 2009801063) for financial supports. J.M.P. also thanks ITQ for his fellowships. V.P. and F.P. thanks Project PN-II-151 for financial supports.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Pt and Pd nanoparticles supported on structured materials as catalysts for the selective reductive amination of carbonyl compounds

  • Domine, Marcelo Eduardo
  • Navarro Villalba, Mª Teresa|||0000-0001-5012-8414
  • Hernández-Soto, M. Consuelo
  • Pérez, Yolanda
[EN] Metal catalysts based on Pt and Pd nano-particles supported on structured microporous Beta zeolites and mesoporous MCM-41 materials, as well as specially designed gamma-Al(2)O(3) samples, were synthesized following a simple and economic procedure. Physico-chemical characterization of metal-composites (by XRD, IR spectroscopy, TEM, N(2) adsorption, ICP, among others) indicated that both Pt and Pd nano-particles were adequately supported and homogeneously dispersed on supports. These metal/solid acid composites were applied as efficient catalysts under mild reaction conditions in the selective reductive amination of ketones, a useful industrial reaction for the synthesis of substituted amines and N-heterocycles. Results obtained showed that Pt/Al-Beta catalyst possesses the best catalytic activity (TON = 1610, with amine selectivities >95%) superior to that observed with commercial Pt/C and Pt/Al(2)O(3) (TON approximate to 1000). Enhancements in Pt/Al-Beta samples were achieved by optimizing the Pt loading, and mainly the Si/Al molar ratio in solids. On the contrary, inferior catalytic activities were encountered with the Pt/Si-MCM-41 and Pt/Al-MCM-41 materials. The Pd incorporation on MCM-41 materials produced more active catalysts than the commercial Pd/C and Pd/Al(2)O(3) samples. Finally, the study of Pt/ and Pd/gamma-Al(2)O(3) materials demonstrated that the treatments of support prior to the metal impregnation and the posterior calcinations processes were essentials to obtain efficient catalysts. (C) 2011 Elsevier B.V. All rights reserved., Financial support by Ministerio de Ciencia e Innovación (MICINN) of Spain (CTQ-2008-06446), CSIC (PIE-200980I063), and COST Action CM0903 (UBIOCHEM) is gratefully acknowledged. Authors also thank M.Arribas for help in adsorption measurements.