Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 37
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Metodologías Agile para el desarrollo de softskills: aplicando SCRUM en titulaciones STEM

  • Castello-Sirvent, Fernando|||0000-0002-2088-0039
[ES] Este trabajo describe la aplicación de la metodología Scrum en estudios de grado y post-grado de la Escuela Técnica Superior de Ingeniería Industrial (ETSII) de la Universitat Politècnica de València y analiza esta metodología Agile como instrumento de desarrollo competencial para las softskills trabajo en equipo y liderazgo. Además, esta investigación evalúa la percepción que el alumnado de titulaciones STEM sobre ambas softskills integradas por la Universitat Politècnica de València en su programa de desarrollo competencial. El objetivo de esta investigación es evaluar las posibilidades que ofrece Scrum para el desarrollo de la competencia transversal de trabajo en equipo y liderazgo en los futuros titulados de ingeniería. Esta investigación se ha llevado a cabo dentro de los proyectos de innovación y mejora educativa (PIME / 19-20 Ref.150, Ref.151 y Ref.152) financiados por la Universitat Politècnica de València. El desarrollo competencial analizado se articula desde el fomento de la cooperación empleando una metodología Agile de amplio recorrido, apoyando el pensamiento crítico y la creatividad para la generación de soluciones rápidas y adecuadas que den adecuada respuesta a un contexto empresarial caracterizado por entornos VUCA (volátiles, inciertos, complejos y ambiguos). El trabajo de campo fue realizado durante el curso 2020-2021 aplicando metodología docente de tipo híbrido, esto es, de forma simultánea presencial y remota síncrona. La investigación sigue una metodología cualitativa que facilita la observación y descripción del proceso seguido, suponiendo una guía de reproducción para futuras investigaciones. Además, se suministró un cuestionario al alumnado, a fin de evaluar su percepción sobre la competencia transversal objeto de estudio y cómo esta percepción podía verse alterada en función de la aplicación de una metodología Agile para su desarrollo en el aula. Los resultados muestran diferencias de percepción sobre la competencia transversal trabajo en equipo y liderazgo, entre alumnos de grado y postgrado, así como entre hombres y mujeres. Las diferencias iniciales convergen tras la aplicación de Scrum en el aula, mejorando la percepción de utilidad de la competencia evaluada. Otro de los resultados revela mejores resultados en términos de cooperación y creatividad en las soluciones generadas por los diferentes equipos. Los alumnos modifican su percepción sobre la competencia transversal trabajo en equipo y liderazgo en función de la metodología empleada. El uso de metodologías Agile y su aplicabilidad en el aula fueron recibidas con un elevado grado de satisfacción entre el alumnado de titulaciones STEM. El uso de Scrum contribuyó a modificar el interés por un desarrollo profesional de dicha competencia a largo plazo. Este estudio permite fijar líneas de trabajo posteriores para desarrollar investigación que permita evaluar el desarrollo de softskills en un análisis longitudinal sobre titulados en grados y másteres STEM., PIME / 19-20 Ref.150, Ref.151 y Ref.152
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Introgressed eggplant lines with the wild Solanum incanum evaluated under drought stress conditions

  • Flores-Saavedra, Martín Ignacio|||0000-0002-8470-2362
  • Gramazio, Pietro|||0000-0003-2226-7999
  • Vilanova Navarro, Santiago|||0000-0003-4939-9713
  • Mircea, Diana Maria|||0000-0002-9747-7272
  • Ruiz-González, Mario X.|||0000-0003-3654-773X
  • Vicente, Oscar|||0000-0001-5076-3784
  • Prohens Tomás, Jaime|||0000-0003-1181-9065
  • Plazas Ávila, María de la O|||0000-0001-8090-7312
[EN] As access to irrigation water becomes increasingly limited, introgression of relevant genomic regions from drought-tolerant wild genotypes is a promising breeding strategy for crop plants. In this study, nine eggplant (Solanum melongena) introgression lines (ILs) covering altogether 71.6% of the genome of the donor wild relative parent S. incanum were evaluated for drought tolerance under water stress conditions. Plants at the five true leaves stage were irrigated at either 100% (control) or 30% (water stress) field capacity for 14 days, and growth and biochemical traits were measured. Reduced irrigation resulted in decreased growth and increased stress markers such as proline and malondialdehyde. Most ILs had lower growth and biomass production than the cultivated parent under both conditions. However, the wild alleles for two genomic regions related to stem and root dry weight conferred improved tolerance to water stress. In addition, several S. incanum alleles had a positive effect on important traits that may improve yield under drought conditions, such as leaf water content water use efficiency, and chlorophyll content. Fine-mapping the genomic regions for tolerance and reducing linkage drag with regions affecting growth will be crucial for significantly improving eggplant drought tolerance through introgression breeding., This work was supported by the grants CIPROM/2021/020 from Conselleria d'Educacio, Universitats i Ocupacio (Generalitat Valenciana, Spain) and PID2021-128148OB-I00 funded by MCIN/AEI/10.13039/501100011033/and by "ERDF A way of making Europ", as well as by the initiative "Adapting Agriculture to Climate Change: Collecting, Protecting and Preparing Crop Wild Relatives", which is supported by the Government of Norway. This latter project is managed by the Global Crop Diversity Trust with the Millennium Seed Bank of the Royal Botanic Gardens, Kew and implemented in partnership with national and international gene banks and plant breeding institutes around the world. For further information, see the project website: http:// www.cwrdiversity.org/. Martin Flores-Saavedra is grateful to Conselleria d'Educacio, Universitats i Ocupacio de la Generalitat Valenciana for a pre-doctoral grant within the Santiago Grisolia programme (GRISOLIAP/2021/151) . Pietro Gramazio is grateful to Spanish Ministerio de Ciencia e Innovacion for a post-doctoral grant (RYC2021-031999-I) funded by MCIN/AEI/10.13039/501100011033 and the European Union through NextGenerationEU/PRTR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

How does the use of digital platforms impact on students marks at high education?

  • Esteso, Ana|||0000-0003-0379-8786
  • Alarcón Valero, Faustino|||0000-0002-0783-3932
  • Prats-Montalbán, José Manuel|||0000-0001-6294-4486
  • Rodríguez-Sánchez, María De Los Ángeles
[EN] More and more universities use educational digital platforms to support teaching. Due to the covid-19 crisis, and with the online teaching approval, the usage of digital platforms in universities has gone from being an option to a necessity. Therefore, efforts have been made to promote the use of existing platforms in each university. This has required teachers not only to make an effort to transform and adapt in record time all the presential teaching to virtual teaching, but also has required professors to learn how to use some of the features of existing digital platforms that were not familiar to them. However, did using this type of platforms positively impact on high education students marks? This study aims to determine if such impact existed in engineering schools. More concretely, this paper focus on engineering students from different grades and levels from the Universitat Politècnica de València in Spain, and on the use of the PoliformaT digital platform, which is an adaptation of Sakai platform for the mentioned university. Statistics data provided by PoliformaT about the number of visits, number of events with the platform, and downloaded documents per student for several subjects from the School of Industrial Engineering and the School of Informatics for the course 2019-2020 are analysed. Multiple linear regression models on marks obtained by students and their activity on PoliformaT platform have been built to determine if the usage of digital platforms has any relation with the students¿ marks. A varied casuistry is observed in the results. Relations of the analysed items with marks have been identified in some of the analysed subjects, still these relations being moderate. In this sense, some unconsidered factors might be influencing these relations, being appropriate to analyse them in future research. On the other hand, it is necessary to re-analyse this same scenario in future courses when both, students and professors, have enough usage level of the employed teaching tools. Next course we expect that some of the deficiencies identified in this first study will be reduced after both actors become familiar to these digital tools., This work has been developed within the framework of the projects Coordinación metodológica a través de webs de apoyo en títulos ETSII para diferentes Competencias Trasversales of the call for Educational Innovation and Improvement Projects (PIME) with code PIME/19-20 Ref. 150, Ref. 151 and Ref. 152, in its institutional modality, promoted by the Vice-Rectorate for Studies, Quality and Accreditation and the Institute of Education Sciences of the Universitat Politècnica de València. The second author was supported by the Generalitat Valenciana (Conselleria de Educación, Investigación, Cultura y Deporte) under Grant ACIF/2019/021.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Growth and antioxidant responses to water stress in eggplant MAGIC population parents, F1 hybrids and a subset of recombinant inbred lines

  • Flores-Saavedra, Martín Ignacio|||0000-0002-8470-2362
  • Plazas Ávila, María de la O|||0000-0001-8090-7312
  • Gramazio, Pietro|||0000-0003-2226-7999
  • Vicente, Oscar|||0000-0001-5076-3784
  • Vilanova Navarro, Santiago|||0000-0003-4939-9713
  • Prohens Tomás, Jaime|||0000-0003-1181-9065
[EN] Background The generation of new eggplant (Solanum melongena L.) cultivars with drought tolerance is a main challenge in the current context of climate change. In this study, the eight parents (seven of S. melongena and one of the wild relative S. incanum L.) of the first eggplant MAGIC (Multiparent Advanced Generation Intercrossing) population, together with four F1 hybrids amongst them, five S5 MAGIC recombinant inbred lines selected for their genetic diversity, and one commercial hybrid were evaluated in young plant stage under water stress conditions (30% field capacity; FC) and control conditions (100% FC). After a 21-day treatment period, growth and biomass traits, photosynthetic pigments, oxidative stress markers, antioxidant compounds, and proline content were evaluated. Results Significant effects (p<0.05) were observed for genotype, water treatments and their interaction in most of the traits analyzed. The eight MAGIC population parental genotypes displayed a wide variation in their responses to water stress, with some of them exhibiting enhanced root development and reduced foliar biomass. The commercial hybrid had greater aerial growth compared to root growth. The four F1 hybrids among MAGIC parents differed in their performance, with some having significant positive or negative heterosis in several traits. The subset of five MAGIC lines displayed a wide diversity in their response to water stress. Conclusion The results show that a large diversity for tolerance to drought is available among the eggplant MAGIC materials, which can contribute to developing drought-tolerant eggplant cultivars., This work was funded by MICIU/AEI/10.13039/501100011033 (PCI2019-103375) and cofunded by the European Union. Funding was also received from grant CIPROM/2021/020 funded by Conselleria d'Educacio, Universitats i Ocupacio of the Generalitat Valenciana, and from grant PDC2022-133513-I00 funded by MICIU/AEI/10.13039/501100011033 and by the European Union NextGeneration EU/PRTR. MF-S is grateful to Conselleria d'Educacio, Universitats i Ocupacio of the Generalitat Valenciana for a pre-doctoral grant within the Santiago Grisolia program (GRISOLIAP/2021/151). PG has received a postdoctoral grant (RYC2021-031999-I) funded by MICIU/AEI/10.13039/501100011033 and by the European Union NextGeneration EU/PRTR. Funding for open access: Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Recubrimientos laser cladding de TiAl sobre Ti6Al4V: Caracterización tribológica, TiAl laser cladding coatings on Ti6Al4V: Tribological characterization

  • Zambrano-Carrullo, Jenny Cecilia
  • Cárcel González, Bernabé
  • Pereira-Falcon, Juan Carlos
  • Amigó, Vicente|||0000-0002-2107-0273
[EN] The Ti6Al4V has proven an important engineering alloy due to its good properties such as the excellent strength, weight ratio, high corrosion resistance and biocompatibility. However, the alloy is susceptible to mechanical degradation in applications involving sliding wear or abrasion. In order to improve wear resistance has been deposited by laser cladding on Ti6Al4V alloy a titanium-aluminum intermetallic alloy. For the realization of coatings different process parameters, such as laser power, scanning speed, powder feeding rate and the preheating temperature were optimized. The microstructure of the coatings was evaluated using optical microscopy (OM), scanning electron microscopy (SEM) and X-ray diffraction (XRD). Furthermore tribological properties were obtained, using a ball on disk tribometer, with Al2O3 ball, constant speed of 0.1 m/s, 10 N load at temperature 24 °C and 500 °C. We evaluated 3D surface topography obtained by the wear scar with an inductive contact profilometer and calculating from it the volume removed and the wear rate. The microstructure of the coatings consists of ¿-TiAl phase and ¿2-Ti3Al. The wear test results at room temperature show a lower wear rate for the coatings compared to the substrate. At high temperature the coatings have a higher friction coefficient and a higher rate of wear is obtained when compared with the substrate. The coatings have good metallurgical bond, although the presence of cracks and the different wear mechanisms have an influence on the wear resistance at elevated temperatures., [ES] El Ti6Al4V ha demostrado ser una importante aleación de ingeniería debido a sus buenas propiedades tales como la excelente relación resistencia/peso, alta resistencia a la corrosión y biocompatibilidad. Sin embargo, la aleación es propensa a la degradación mecánica en aplicaciones que implican desgaste por deslizamiento o abrasión. Con la finalidad de mejorar su resistencia al desgaste, se ha desarrollado recubrimientos por laser cladding coaxial sobre láminas de Ti6Al4V, con una aleación de titanio aluminio Ti48Al2Cr2Nb. Para la realización de los recubrimientos se optimizaron diferentes parámetros de proceso, tales como potencia, velocidad de pasada, caudal de polvo suministrado y temperatura de calentamiento del sustrato. Se determinó la microestructura de los recubrimientos obtenidos mediante microscopía óptica (MO), microscopía electrónica de barrido (MEB) y difracción de rayos X (DRX). Por otro lado se obtuvieron propiedades tribológicas mediante ensayos de desgaste utilizando un tribómetro en configuración del tipo bola sobre disco, con bola de Al2O3, velocidad de 0.1 m/s, carga de 10 N, a temperaturas de ensayo de 24 ºC y 500 ºC. La topografía 3D de la huella de desgaste fue obtenida con un perfilómetro inductivo de contacto, a partir de ella el volumen removido y la tasa de desgaste. La microestructura de los recubrimientos se compone de fases ¿-TiAl y ¿2-Ti3Al. En los ensayos de desgaste a temperatura ambiente los resultados muestran una tasa de desgaste menor por parte de los recubrimientos comparados con el sustrato. A elevada temperatura los recubrimientos presentan un mayor coeficiente de fricción, y además, se obtiene una mayor tasa de desgaste cuando se compara con el sustrato. Los recubrimientos presentan buena adherencia en general, observándose que la presencia de grietas influye en la resistencia al desgaste a elevadas temperaturas, así como en los diferentes mecanismos de desgaste observados., Los autores agradecen el apoyo financiero del Ministerio de Ciencia e Innovación del Gobierno de España a través del proyecto de investigación MAT2011-28492-C03 y a la Generalitat Valenciana a través del apoyo ACOMP/2014/151. Se agradece además al Dr. José Luis Jordá del Instituto de Tecnología Química de la UPV, por los análisis de difracción de rayos X realizados.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Microstructural characterisation of Ti-Nb-(Fe-Cr) alloys obtained by powder metallurgy

  • Amigó Mata, Angèlica
  • Zambrano, Jenny Cecilia
  • Martínez, S.
  • Amigó, Vicente|||0000-0002-2107-0273
[EN] beta alloys based on the Ti Nb alloy system are of growing interest to the biomaterial community. The addition of small amounts of Fe and Cr further increases beta-phase stability, improving the properties of Ti Nb alloy. However, PM materials sintered from elemental powders are inhomogeneous due to restricted solid state diffusion and mechanical alloying provides a route to enhance mixing and lemental diffusion. The microstructural characteristics and bend strength of Ti Nb (Fe Cr) alloys obtained from elemental powder mixture and mechanical alloyed powders are compared. Mechanical alloying gives more homogeneous compositions and particle morphology, characterised by rounded, significantly enlarged particles. In the sintered samples alpha and beta phase are observed. The alpha phase appears at the grain boundaries and in lamellae growing inward from the edge, and is depleted in Nb. The b phase is enriched with Nb, Fe and Cr. The addition of Fe and Cr significantly increases the mechanical properties of Ti Nb alloys, providing increased ductility., This paper is based on a presentation at Euro PM 2014, organised by EPMA in Salzburg, Austria on 21-24 September 2014. This work was funded by UPV by the Staff Training Program for Predoctoral Researchers dated 28 February 2014. The Ministry of Science and Innovation of Spain by project research MAT2011-28492-C03 and Generalitat Valenciana by ACOMP / 2014/151.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of process parameters and initial microstructure on the oxidation resistance of Ti48Al2Cr2Nb coating obtained by laser metal deposition

  • Zambrano Carrullo, Jenny Cecilia
  • Pereira Falcón, Juan Carlos
  • Amigó, Vicente|||0000-0002-2107-0273
[EN] Ti6Al4V have been the most important and versatile titanium alloys currently used, due to their excellent combination of low density and good mechanical properties, despite their application temperature being limited to up to 300 °C. In this work, a Ti6Al4V sheet was coated with a Ti48Al2Cr2Nb alloy by laser cladding process, with the process parameters resulting in laser-specific energy densities of 70, 80, 90 and 180 J/mm2, laser power between 600 and 900W and scanning speed of 100 to 300 mm/min. In order to analyze the oxidation resistance at elevated temperature, isothermal oxidation tests were carried out at 800 °C for 5, 10, 25, 50, 100 and 150 h in static air. The oxidized samples were characterized by optical microscopy (OM), scanning electron microscopy (SEM), field emission microscopy (FESEM) with energy dispersive spectroscopy (EDS), and X-ray diffraction (XRD) analysis. Two groups of coatings with similar microstructures were obtained, and their influence on the formation of thermally oxidized growth layers was studied. From the isothermal oxidation tests, it was observed that the Ti48Al2Cr2Nb coatings have good resistance to oxidation in air at 800 °C in comparison with the Ti6Al4V substrate by obtaining layers of oxides up to 12 ¿m thick after 150 h of oxidation. The structure of the oxide layers is complex and comprises the growth of successive layers from the outer surface of the coating. The effect of the microstructure of the coating on the density of the oxide layer formed was evaluated., The authors would like to thank the Ministerio de Ciencia e Innovacion of the Spanish Government for their financial support through research project MAT2011-28492-C03 and the Generalitat Valenciana through grant ACOMP/2014/151.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Sustainability Metrics for Succinic Acid Production: A Comparison between Biomass-based and Petrochemical Routes

  • Pinazo De la Cruz, José Miguel
  • Parvulescu, Vasile
  • Petru, Filip
  • Domine, Marcelo Eduardo
Biomass-derived succinic acid (Bio-SA) has been described as a strategic platform chem., due to its potential as the C4 building block in industrial org. chem. Sustainability of SA prodn. via fermentative synthesis was studied through two different processes (Myriant and Reverdia cases) and compared with the corresponding petrochem. route. Four groups of parameters, namely material efficiency, economics, energy efficiency and land use were considered. Green metrics results show that energy efficiency for Bio-SA prodn. is slightly higher while material efficiency is rather lower when compared with the petrochem. counterpart. Remarkably, Bio-SA calcd. costs (»1040euro/MT in the worse case) are quite lower than the actual prices for Petr.SA and close to the price of maleic anhydride used as raw material. Thus, bio-based SA prodn. appears to be competitive with petrochem. route for MAN. Competitiveness of Bio-SA can be boosted by optimization of fermentative process, as well as by the Bio-SA upgrading to high added value chems., The authors acknowledge UBIOCHEM COST Action CM0903. M.E.D thanks the Ministerio de Ciencia e Innovacion of Spain (MICINN, CTQ2011-27550; and MICINN-CSIC, 2009801063) for financial supports. J.M.P. also thanks ITQ for his fellowships. V.P. and F.P. thanks Project PN-II-151 for financial supports.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Analysis of digital teaching tools in the new educational paradigm

  • Rodríguez-Sánchez, María De Los Ángeles
  • Esteso, Ana|||0000-0003-0379-8786
  • Alemany Díaz, María Del Mar|||0000-0002-0992-8441
  • Boza, Andres|||0000-0002-5429-0416
[EN] Nowadays most high education professors use several digital tools to support teaching, such as education platforms and other sources like digital slides or digital documents. Most universities rely on their own educational platforms, which has been mainly used to share documents between professors and students. These platforms reinforce the master classes, but do not replace the typical face-to-face classes. For instance, the platform used by the Universitat Politècnica de València in 2006 is called PoliformaT and is an adaptation of Sakai. On this digital platform, professors and students can share and manage information and documents from their degree or master subjects, such as tasks, exams, content repository, etc. Due to the COVID-19 crisis, the high education professors forced to replace face-to-face classes by virtual classes, to confront the new educational paradigm that has emerged. Furthermore, they have had to deepen into the functionalities offered by existing platforms and to adapt their teaching to other types of platforms that allow virtual teaching such as Microsoft Teams, Google Classroom or Blackboard Learn. Therefore, because of the current situation and the potential that e-learning platforms and tools have in university teaching, it has led to the emergence of numerous software related to teaching. However, due to the short reaction time to adapt face-to-face to virtual teaching, no comparisons have been made between existing digital tools to define which of them is most appropriate for each university and its teaching style. Hence, a deep analysis of existing digital tools to support teaching is required. This paper aims to analyse and compare several teaching software tools. For that, the functionalities of the most used teaching tools are compared, and their main advantages and disadvantages are analysed in order to obtain the best tools to be used in high education., This work has been developed within the framework of the projects Coordinación metodológica a través de webs de apoyo en títulos ETSII para diferentes Competencias Trasversales of the call for Educational Innovation and Improvement Projects (PIME) with code PIME/19-20 Ref. 150, Ref. 151 and Ref. 152, in its institutional modality, promoted by the Vice-Rectorate for Studies, Quality and Accreditation and the Institute of Education Sciences of the Universitat Politècnica de València. The first author was supported by the Generalitat Valenciana (Conselleria de Educación, Investigación, Cultura y Deporte) under Grant ACIF/2019/021.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Web based on e-learning objects as support to the development of transversal competences for engineering students

  • Alemany Díaz, María Del Mar|||0000-0002-0992-8441
  • Villanueva López, José Felipe|||0000-0002-7684-6884
  • Vallés Lluch, Ana|||0000-0002-7896-8666
  • García-Serra García, Jorge|||0000-0002-9315-7941
[EN] Active learning methodologies stand out among the priority lines in the field of higher education, exemplified by flipped teaching or project-based learning (PBL). The latter is a methodological approach of marked complexity and close to reality, which favours learning experiences with high educational impact, knowledge integration, and the transfer of what has been learnt to professional reality. In this context, it becomes necessary to work and assess the students¿ performance related not only to specific competences (SC) as usual, but also to transversal ones (TC), previously and simultaneously. The Universitat Politècnica de València (UPV), being aware of the increasing demand of TCs by employers and society, has defined 13 TCs whose training and assessment are integrated in their Bachelor's and Master's Degrees by means of the so called control point subjects. Based on the experience acquired in the School of Industrial Engineering (ETSII) since a number of subjects were appointed as control points of TCs in its 5 Degrees and 7 Masters, 6 of the TCs can be singled out for being the most difficult for teachers: Innovation, creativity and entrepreneurship; Teamwork and leadership; Ethical, environmental and professional responsibility; Knowledge of contemporary problems; Permanent learning; Time planning and management. Unlike the instrumental TCs, which are intrinsic to the subjects taught, the (inter)personal and systemic ones are more complicated to fit in the subjects, because they require more complex or wider environments, or are very time consuming. That is why it has been proposed to use the flipped teaching methodology for the students¿ autonomous learning in TCs, through the development of an online educational platform. The website, with a section per TC, is accessible from https://www.etsii.upv.es/competencias/index-es.php. Its structure covers the definition of the TC, the aspects to enhance to acquire it, a performance level test, and resources to improve it (in-house produced and external). The value of this initiative is double: on the one hand, it is a space designed for the training of students and not for assisting the teacher (the UPV already put material available to teachers), and, on the other hand, it will serve as a vertical coordination axis between the subjects of a Degree. Future actions of improvement include examples of application of the techniques proposed to engineering cases, organization of resources by domain levels, and experiences of UPV students., The authors acknowledge the financial support partly from the School of Industrial Engineering (ETSII) of UPV and partly from the Universitat Politècnica de València through the ¿Coordinación metodológica a través de webs de apoyo en las titulaciones de la ETSII para las Competencias Transversales¿ PIME/19-20 Ref.150, Ref.151 and Ref.152 projects.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Synthesis and High-Pressure Study of Corundum-Type In2O3

  • García-Domene, B.
  • Sans Tresserras, Juan Ángel
  • Ovsyannikov, Sergey V.
  • Dubrovinsky, L.S.
  • Martinez-Garcia, D.
  • Gomis, O.
  • Errandonea, D.
  • Moutaabbid, H.
  • Le Godec, Y.
  • Ortiz, H.M.
  • Muñoz, A.
  • Rodríguez-Hernández, P.
  • Popescu, C.
  • Manjón, Francisco-Javier|||0000-0002-3926-1705
This work reports the high-pressure and high-temperature (HP-HT) synthesis of pure rhombohedral (corundum-type) phase of indium oxide (In2O3) from its most stable polymorph, cubic bixbyite-type In2O3, using a multianvil press. Structural and vibrational properties of corundum-type In2O3 (rh-In2O3) have been characterized by means of angle-dispersive powder X-ray diffraction and Raman scattering measurements at high pressures which have been compared to structural and lattice dynamics ab initio calculations. The equation of state and the pressure dependence of the Raman-active modes of the corundum-type phase are reported and compared to those of corundum (α-Al2O3). It can be concluded that rh-In2O3 is stable under compression up to 14 GPa and it gradually transforms to the orthorhombic Rh2O3−III structure with Pbca space group (N. 61) between 14 and 26 GPa. The bulk modulus, axial compressibilities, and the pressure range of stability of the corundumtype phase in group IIIA sesquioxides A2O3 (A = Al, Ga, and In) are discussed., This work is supported by the Spanish MICINN Projects MAT2013-46649-C4-1/2/3-P, CSD2007-00045, and MAT2015-71070-REDC and by the Generalitat Valenciana under Projects GV06/151 and ACOMP/2014/243. A.M. and P.R-H. want to thank computing time provided by Red Espanola de Supercomputacion (RES) and MALTA-Cluster. B.G.-D. and J.A.S. acknowledge financial support through the FPI program and Juan de la Cierva fellowship, respectively. S.V.O. acknowledges the financial support of the Deutsche Forschungsgemeinschaft (DFG) under Project OV-110/1-2.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

La integración de Competencias Transversales en la Educación Superior en Ingenierías mediante herramientas de e-learning. El caso de la ETSII en la UPV, The integration of Transversal Competences in Higher Education in Engineering through e-learning tools. The case of the ETSII at the UPV

  • Villanueva López, José Felipe|||0000-0002-7684-6884
  • Alemany Díaz, María Del Mar|||0000-0002-0992-8441
  • Vallés Lluch, Ana|||0000-0002-7896-8666
  • García-Serra García, Jorge|||0000-0002-9315-7941
  • Alarcón Valero, Faustino|||0000-0002-0783-3932
  • Andrés-Bello, Javier
  • Aragonés-Beltrán, Pablo|||0000-0003-0538-9409
  • Espinós Capilla, Ana|||0000-0001-7335-4676
  • Esteso, Ana|||0000-0003-0379-8786
  • Fuertes-Miquel, Vicente S.|||0000-0003-3524-2555
  • Gimenez Palomares, Fernando
  • Lapuebla-Ferri, Andrés|||0000-0001-9667-236X
  • Museros Romero, Pedro|||0000-0002-1389-0204
  • Vilariño-Feltrer, Guillermo|||0000-0002-3063-3808
  • Fuster Estruch, María Vicenta
[EN] One of the objectives of Higher Education, increasingly demanded by the labor market, is to guarantee the development of professional, social and ethical skills of students. Making the learning of these type of transversal competences (TC) compatible with the specific competences of the degree in the time frame of the studies, is not an easy task in particular of some of these competences, in engineering profile degrees. For this reason, at the Higher Technical School of Industrial Engineering (ETSII) of the Universitat Politècnica de València (UPV) it has been designed an e-learning platform by the teaching staff, students and employers, coordinated by the SubDirectorate of Educational Innovation and within the framework of a Project of Innovation and Educational Improvement of the UPV,. This platform allows students to train in TC at their own pace according to their needs and teachers to use methodologies appropriate to their subjects and domain level adapted to the engineering framework. In this way, the platform can be used as a vertical coordination axis between subjects, for the development of TC at the different levels of mastery throughout the ETSII students' studies., [ES] Uno de los objetivos de la Educación Superior cada vez más demandado por el mercado laboral es garantizar el desarrollo de habilidades profesionales, sociales y éticas del alumnado. Compatibilizar el aprendizaje de este tipo de competencias de carácter transversal (CT) con las competencias específicas propias de la titulación en el marco temporal de los estudios, no es tarea sencilla especialmente para algunas de estas competencias y en titulaciones de perfil ingenieril. Por este motivo, en la Escuela Técnica Superior de Ingeniería Industrial (ETSII) de la Universitat Politècnica de València (UPV) se ha diseñado una plataforma e-learning por parte del profesorado, estudiantes y empleadores, coordinados por la Subdirección de Innovación Educativa y en el marco de diferentes Proyectos de Innovación y Mejora Educativa de la UPV, Esta plataforma permite al estudiantado formarse en CT de manera autónoma según sus necesidades, y al profesorado recurrir a metodologías adecuadas a sus asignaturas y nivel de dominio adaptadas al ámbito ingenieril. De esta forma, la plataforma puede usarse como eje de coordinación vertical entre asignaturas, para el desarrollo de CT en los distintos niveles de dominio a lo largo de los estudios del alumnado de la ETSII., Este trabajo ha sido desarrollado en el marco de los proyectos "Coordinación metodológica a través de webs de apoyo en títulos ETSII para diferentes CT" de la convocatoria de Proyectos de Innovación y Mejora Educativa Institucionales con código PIME/19-20 Ref.150, Ref.151 y Ref.152, impulsada por el Vicerrectorado de Estudios, Calidad y Acreditación y el Instituto de Ciencias de la Educación de la UPV
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Towards realistic urban rooftop solar photovoltaic large-scale planning: integrating artificial intelligence-based roof detection, 3D geometry, and energy modelling

  • Pino-Gallardo, Tomás
  • Bastida-Molina, Paula|||0000-0003-3516-0090
  • Gómez-Navarro, Tomás|||0000-0001-6114-2414
  • Montagud- Montalvá, Carla|||0000-0002-7118-6119
[EN] Urban rooftop solar photovoltaic (PV) systems represent a key strategy for advancing city-scale decarbonisation, yet their realistic potential is frequently overestimated due to simplified geometric and energy assumptions. This study presents a fully automated methodology based on artificial intelligence (AI), LiDAR-derived threedimensional geometry, and solar energy modelling to identify large-scale urban rooftop PV installation potential and to generate optimised PV panel layouts that maximise annual electricity generation. The workflow integrates high-resolution georeferenced imagery, LiDAR point clouds, cadastral data, and open-source GIS tools within a modular Python environment, enabling the identification of technically viable rooftop areas and the optimisation of PV layouts with corresponding annual energy yield estimation. The methodology accounts for geometric constraints, minimum irradiation thresholds, slope and orientation filters, structural proxies, and maintenance corridors. Applied to the city of Valencia (Spain), the methodology is implemented over approximately 18.4 million m2 of urban rooftop surface. The resulting layouts allow the installation of 342,785 PV modules, corresponding to 173 MW of installed capacity and an estimated annual electricity generation of 270 GWh. These results demonstrate the capacity of automated, spatially explicit approaches to support realistic urban energy planning and decision-making processes., This work was supported by Ayuda a Primeros Proyectos de Investigacion (PAID-06-24) funded by Vicerrectorado de Investigacion de la Universitat Politecnica de Valencia; by the URBISOS project (CIGE/ 2024/193) funded by the Generalitat Valenciana; by a grant of the Catedra de Transicion Energetica Urbana- funded by Ajuntament de Val`encia-Las Naves and Fundacio Valencia Clima i Energia; the RES4CITY project, financed by the European Union under Grant Agreement No. 101075582.; and by ZENTROPY project, financed by the European Union under Grant Agreement No. EUI02-151.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Nitrogen use efficiency, growth and physiological parameters in different tomato genotypes under high and low N fertilisation conditions

  • Flores-Saavedra, Martín Ignacio|||0000-0002-8470-2362
  • Villanueva-Párraga, Gloria|||0000-0002-1475-2882
  • Gramazio, Pietro|||0000-0003-2226-7999
  • Vilanova Navarro, Santiago|||0000-0003-4939-9713
  • Prohens Tomás, Jaime|||0000-0003-1181-9065
  • Plazas Ávila, María de la O|||0000-0001-8090-7312
  • Mauceri, Antonio
  • Abenavoli, Maria Rosa
  • Sunseri, Francesco
[EN] Identification of novel genotypes with enhanced nitrogen use efficiency (NUE) is a key challenge for a sustainable tomato production. In this respect, the performance of a panel of thirty tomato accessions were evaluated under high (HN; 5 mM N) and low (LN; 0.5 mM N) nitrogen irrigation solutions. For each treatment, when 50% of plants reached the first flower bud stage, plant growth and biomass traits, chlorophyll, flavonol and anthocyanin indexes, nitrogen balance index (NBI), C:N ratio in leaves, stems, and roots, and NUE were evaluated. Significant (p < 0.05) effects were observed for accession, N treatment, and their interaction across all the traits. Under LN, plants showed a delayed development (40 days for HN vs. 65 days for LN) and reduced growth and biomass. On average, LN condition led to 41.8% decrease in nitrogen uptake efficiency (NUpE) but also 189.0% increase in NUtE, resulting in 62.2% overall increase in NUE. A broad range of variation among accessions was observed under both HN and LN conditions. Under LN conditions, chlorophyll index and NBI decreased, while flavonol and anthocyanin indexes increased. Leaf C:N ratio was positively correlated with nitrogen utilisation efficiency (NUtE) in both N treatments. Multi-trait analyses identified top-performing accessions under each condition, allowing to identify one accession among top performers under both conditions. Correlation analysis revealed that high root biomass and leaf C:N ratio are useful markers for selecting high NUE accessions. These findings offer valuable insights for improving tomato NUE under varying nitrogen fertilization conditions and for breeding high-NUE cultivars., This work was supported by the project SOLNUE in the framework of the H2020 call SusCrop-ERA-Net (ID#47) , which was funded by MCIN/AEI/10.13039/501100011033 (PCI2019-103375) and co-funded by the European Union. Funding was also received from grant CIPROM/2021/020 funded by Conselleria d'Educacio, Universitats i Ocupacio of the Generalitat Valenciana, and from grant TED2021-129296B-I00 funded by MCIN/AEI/10.13039/501100011033 and the European Union through NextGeneration EU/PRTR. MF-S is grateful to Conselleria d'Educaci o, Universitats i Ocupacio of the Generalitat Valenciana for a pre-doctoral grant within the Santiago Grisolia program (GRISOLIAP/2021/151) . GV has received a predoctoral (PRE2019-089256) funded by MCIN/AEI/10.13039/501100011033 and by "ESF Investing in your future". PG has received a postdoctoral grant (RYC2021-031999-I) funded by MCIN/AEI/10.13039/501100011033 and by "European Union through NextGeneration EU/PRTR".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Viroid replication: Rolling-circles, enzymes and ribozymes

  • FLORES PEDAUYE, RICARDO
  • Gas, María-Eugenia
  • Molina-Serrano, Diego
  • Nohales, María-Ángeles
  • Gago, Selma
  • CARBONELL, ALBERTO|||0000-0001-5628-6632
  • La Peña Del Rivero, Marcos De|||0000-0002-7949-8459
  • Daròs, José-Antonio|||0000-0002-6535-2889
[EN] Viroids, due to their small size and lack of protein-coding capacity, must rely essentially on their hosts for replication. Intriguingly, viroids have evolved the ability to replicate in two cellular organella, the nucleus (family Pospiviroidae) and the chloroplast (family Avsunviroidae). Viroid replication proceeds through an RNA-based rolling-circle mechanism with three steps that, with some variations, operate in both polarity strands: i) synthesis of longer-than-unit strands catalyzed by either the nuclear RNA polymerase II or a nuclear-encoded chloroplastic RNA polymerase, in both instances redirected to transcribe RNA templates, ii) cleavage to unit-length, which in the family Avsunviroidae is mediated by hammerhead ribozymes embedded in both polarity strands, while in the family Pospiviroidae the oligomeric RNAs provide the proper conformation but not the catalytic activity, and iii) circularization. The host RNA polymerases, most likely assisted by additional host proteins, start transcription from specific sites, thus implying the existence of viroid promoters. Cleavage and ligation in the family Pospiviroidae is probably catalyzed by an RNase III-like enzyme and an RNA ligase able to circularize the resulting 5' and 3' termini. Whether a chloroplastic RNA ligase mediates circularization in the family Avsunviroidae, or this reaction is autocatalytic, remains an open issue., We are grateful to A. Ahuir for excellent technical assistance. This work was supported by the Ministerio de Ciencia e Innovacion of Spain (grants BFU2008-03154/BMC to R. F. and BIO2008-01986 to J.-A.D.) and by the Generalidad Valenciana (ACOMP/2009/151 to R. F.).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Integration of Project-Based Learning (PjBL) Methodology in the Course &quot, Bioprocesses Applied to the Environment&quot

  • Bes-Piá, M.A.|||0000-0001-8005-7450
  • Mendoza Roca, José Antonio
  • Ferrer-Polonio, Eva|||0000-0001-6412-3825
  • Iborra Clar, Alicia|||0000-0001-5937-8428
  • Zuriaga Agusti, Elena|||0000-0002-5383-1313
  • Lujan Facundo, Maria Jose|||0000-0001-6871-0584
[EN] This paper explains the steps carried out for the design of an educational innovation and the outcomes of its implementation. The innovation consists of integrating the contents of two courses ('biological wastewater treatment' and 'bioprocesses applied to the treatment of wastes') for the same academic year using project-based learning methodology to connect knowledge between subjects and to utilize transversal competences. Students from the second year of a chemical engineering master's degree worked on an open-ended project based on a current environmental problem. This methodology lets the students properly acquire several transversal competences, such as 'Design and project', 'Teamwork and leadership', and 'Effective communication', which were evaluated with rubrics. However, according to the students' perception, other skills, such as 'Comprehension and integration, analysis and problem solving', 'Knowledge of contemporary problems', and 'Planning and time management', were also worked on and improved. Based on the results from the matrix analysis and the Likert questionnaire, the organization and development of the activity were positively assessed, highlighting the importance of the lecturers' feedback. The learning outcome in terms of knowledge integration was accomplished, reaching project marks 8.5-10 on a 0-10 scale., This research was granted by Vice-Rectorate for Studies, Quality and Accreditation of the Universitat Politecnica de Valencia through the program INNOVATION AND EDUCATIONAL IMPROVEMENT PROJECTS (Reference of the projects: PIME/18-19/Ref. 91 and PIME/19-20/Ref. 150/Ref. 151/Ref. 152).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Induction of water stress in major Solanum crops: a review on methodologies and their application for identifying drought tolerant materials

  • Flores-Saavedra, Martín Ignacio|||0000-0002-8470-2362
  • Plazas Ávila, María de la O|||0000-0001-8090-7312
  • Vilanova Navarro, Santiago|||0000-0003-4939-9713
  • Prohens Tomás, Jaime|||0000-0003-1181-9065
  • Gramazio, Pietro|||0000-0003-2226-7999
[EN] The genus Solanum encompasses several economically important vegetable crops, such as tomato, potato, and eggplant, which are crucial for ensuring food security. Higher temperatures and reduced precipitation are becoming more frequent due to climate change in numerous regions, fostering drought spells and the likelihood of water stress in Solanum crops resulting in decreased yields. Appropriate evaluation techniques are required by researchers and breeders to evaluate the impact of drought on the performance of Solanum crops and identify more tolerant genotypes. This review examines the most important approaches for inducing water stress in Solanum crops, such as withholding irrigation, adjusting field capacity levels, applying evapotranspiration criteria, and utilizing polyethylene glycol as an osmotic agent. We highlight the benefits and drawbacks of each method, enabling researchers and breeders to choose the most suitable conditions for their specific objectives and goals. Additionally, we address the challenges of combining water stress with other types of stress that frequently occur simultaneously in the field and the effects that biostimulants can have in mitigating water stress in Solanum crops. We also provide an in-depth analysis of the impact of water deficit on growth and biomass, as well as on physiological and biochemical traits, and new phenotyping tools that allow the study of stress tolerance in the three major crops belonging to the Solanum genus. Finally, the review discusses the possibility of utilizing wild species to improve water stress tolerance in these Solanum crops., This work was supported by grant CIPROM/2021/020 from Conselleria d'Innovacio, Universitats, Ciencia i Societat Digital (Generalitat Valenciana, Spain) as well as by the Horizon Europe program, project "Promoting a Plant Genetic Resource Community for Europe (PRO-GRACE), project number n. 101,094,738. This study also forms part of the AGROALNEXT program and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana. Martin Flores is grateful to Conselleria d'Innovacio, Ciencia i Societat Digital de la Generalitat Valenciana for a pre-doctoral grant within the Santiago Grisolia program (GRISOLIAP/2021/151). Pietro Gramazio is grateful to Spanish Ministerio de Ciencia e Innovacion for a post-doctoral grant (RYC2021-031,999-I) funded by MCIN/AEI/10.13039/501,100,011,033 and the European Union through NextGenerationEU/PRTR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

E-learning in &quot, innovation, creativity and entrepreneurship&quot, : Exploring the new opportunities and challenges of technologies

  • Alemany Díaz, María Del Mar|||0000-0002-0992-8441
  • Vallés Lluch, Ana|||0000-0002-7896-8666
  • Villanueva López, José Felipe|||0000-0002-7684-6884
  • García-Serra García, Jorge|||0000-0002-9315-7941
[EN] Companies and society demand professionals be able to provide creative solutions with added value as well as to implement them in order to face the arising challenges in the increasingly dynamic environment. Although the transversal competence ¿Innovation, Creativity and Entrepreneurship¿ is essential for engineers that should find innovative solutions to problems, teachers find many difficulties when training and evaluating their students in the scope of the regular courses: large groups, very adjusted time to technical contents. In this context, the School of Industrial Engineering (ETSII) at Polytechnic University of Valencia (UPV) is aware of the opportunities offered by new information and communication technologies to support teachers in this task while enhancing students¿ generic outcomes. For this reason, an e-learning platform has been created on this competence, that offers valuable resources to students to implement this competence throughout the assigned course tasks, and supports teachers prompted to train and evaluate this transversal competence. With this platform, the authors aim to contribute to the still neglected educational aspect of entrepreneurship and address for the first time in an e-learning system its relationship with innovation and creativity., The authors acknowledge the financial support partly from the ETSII of UPV and partly from the Universitat Politècnica de València through the Coordinación metodológica a través de webs de apoyo en las titulaciones de la ETSII para las Competencias Transversales PIME/19-20 Ref.150, Ref.151 and Ref.152 projects.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effects of Fe and Mo Content on the Microstructure and Mechanical Properties of Ti-Mo based alloys prepared by Elemental blend and Mechanical alloying technique

  • Mohan, Prakash
  • Amigó Mata, A.
  • Amigó, Vicente|||0000-0002-2107-0273
[EN] Ti and its alloys are mostly used as biomaterials due to its unique properties like high corrosion resistance, low elastic modulus, high mechanical strength/ density ratio, good biocompatibility etc. Ti-&#946; alloys based on the Ti-Mo alloy system shows much more interest for biomaterials. Addition of Zr and small amount of Fe improves the &#946;-phase stability and improving the properties of Ti-Mo alloy. These alloys can be produced by powder metallurgy (PM) using Elemental Blend (EB) technique (600 MPa compaction pressure) and Mechanical Alloying (MA) technique with (600 and 900 MPa compaction pressure). This paper describes the microstructural characterization obtained by SEM and mechanical properties obtained by bending test, Archimedes test and ultrasonic test of Ti-Mo-Zr-Fe alloys made by elemental blend and Mechanical Alloying. Mechanical properties and Microstructure of these powder mixing processes also compared. The addition of small amounts of Fe further increases &#946;-phase stability, improving the properties of Ti¿15Mo¿6Zr¿xFe alloy. In the search for a better implant material, Ti¿12Mo¿6Zr¿2Fe, with its low modulus, ductile property, and reasonably high strength, is a promising candidate., The authors wish to thank the Ministry of Economy and competitiveness through the financial support of the research project MAT2014-53764-C3-1–R, The European commission the Erasmus mundus scholarship program Namaste and the Generalitat Valenciana through support ACOMP/2014/151.The European Commission via FEDER funds that have allowed the purchase of equipment for research and Microscopy Service of the Polytechnic University of Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Mobile Devices and Sensors for an Educational Multimedia Opera Project

  • Dannenberg, R.B.
  • Carrascosa, Elisabeth
  • Sastre, Jorge|||0000-0002-8612-6717
  • Scarani, Stefano|||0000-0003-2366-8866
  • Lloret Romero, María Nuria
[EN] Interactive computer-based music systems form a rich area for the exploration of collaborative systems where sensors play an active role and are important to the design process. The Soundcool system is a collaborative and educational system for sound and music creation as well as multimedia scenographic projects, allowing students to produce and modify sounds and images with sensors, smartphones and tablets in real time. As a real-time collaborative performance system, each performance is a unique creation. In a comprehensive educational project, Soundcool is used to extend the sounds of traditional orchestral instruments and opera singers with electronics. A multidisciplinary international team participates, resulting in different performances of the collaborative multimedia opera The Mother of Fishes in countries such as Spain, Romania, Mexico and the USA., The Soundcool project has been funded by the Daniel and Nina Carasso Foundation Grant 16-AC-2016, the Generalitat Valenciana Grants GJIDI/2018/A/169 and AICO/2015/120, the Spanish Ministerio de Educación, Cultura y Deporte Salvador de Madariaga Grant PRX12/00557, the UPV project PAID 05-12-SP20120470 and a UPV Cátedra Telefónica Grant 2017. Some of the Spanish opera performances have been partially funded by the Institut Valencià de Cultura of the Generalitat Valenciana (2016, 2017, 2018) and the European Erasmus+ projects 2018-1-ES01-KA101-049101 and 2015-1-ES01-KA201-016139. All other contributors are acknowledged in the different videos described above. Soundcool was also used for the Erasmus project 2017-2-IT03-KA105-011802. The Soundcool neurodegenerative disease applications have been funded by the Generalitat Valenciana Grants AICO/2020/151, CIBEST/2021/90 and CIAICO/2022/60, the Santander investigadores/personal técnico en el ecosistema de UC Berkeley Grant 2021/2022 and the UPV-FISABIO-2020-A05 (Polisabio) Grant TANTAENDSCovid.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

DELLA proteins regulate spore germination and reproductive development in Physcomitrium patens

  • Phokas, Alexandros
  • Meyberg, Rabea
  • Briones, Asier
  • Hernandez-Garcia, Jorge
  • Wadsworth, Panida T
  • Vesty, Eleanor F.
  • Rensing, Stefan A.
  • Coates, Juliet C.
  • BLAZQUEZ, MIGUEL-ANGEL|||0000-0001-5743-0448
[EN] Proteins of the DELLA family integrate environmental signals to regulate growth and development throughout the plant kingdom. Plants expressing non-degradable DELLA proteins underpinned the development of high-yielding 'Green Revolution' dwarf crop varieties in the 1960s. In vascular plants, DELLAs are regulated by gibberellins, diterpenoid plant hormones. How DELLA protein function has changed during land plant evolution is not fully understood. We have examined the function and interactions of DELLA proteins in the moss Physcomitrium (Physcomitrella) patens, in the sister group of vascular plants (Bryophytes). PpDELLAs do not undergo the same regulation as flowering plant DELLAs. PpDELLAs are not degraded by diterpenes, do not interact with GID1 gibberellin receptor proteins and do not participate in responses to abiotic stress. PpDELLAs do share a function with vascular plant DELLAs during reproductive development. PpDELLAs also regulate spore germination. PpDELLAs interact with moss-specific photoreceptors although a function for PpDELLAs in light responses was not detected. PpDELLAs likely act as 'hubs' for transcriptional regulation similarly to their homologues across the plant kingdom. Taken together, these data demonstrate that PpDELLA proteins share some biological functions with DELLAs in flowering plants, but other DELLA functions and regulation evolved independently in both plant lineages., AP was supported by the UK Biotechnology and Biological Sciences Research Council (BBSRC) doctoral training grant BB/M01116X/1. EFV was funded by a UK Natural Environment Research Council (NERC) doctoral training scholarship. SAR and RM were supported by grant RE 1697/15-1 from the DFG (German Research Foundation). MAB, AB-M and J H-G were supported by grant PID2019-110717GB-I00 funded by Spanish MCIN/ AEI/10.13039/501100011033. We thank Yuki Yasumura, Eric Belfield and Nicholas Harberd (University of Oxford) for contributing PpDELLA and PpGLP yeast two-hybrid constructs and for Ppdella mutants. We thank Professor Peter Hedden, Rothamsted Research (UK) for generous provision of diterpene supplies. We thank Amber Spiteri and Alec Ballentyne for initiating the yeast two-hybrid system for PpDELLAs and PpGLPs. We thank Amy Whitbread, Sarah Needs, Sue Bradshaw and Dan Holloway (University of Birmingham) for early maintenance of Ppdella moss sporophyte stocks and for preliminary Ppdella germination phenotyping. We thank the University of Birmingham Advanced Light Microscopy (BALM) facility for training and technical assistance. We thank Jon Hughes for advice with the light- and phytochrome/phototropin experiments. We thank Evelyn Vollmeister (University of Marburg) for comments on the manuscript.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Analysis of Decarbonisation and Energy Efficiency Improvement Through Mycelium, Hygromorphic Wood and Hemp

  • Angulo Ibáñez, Quiteria
  • Cárcel-Carrasco, Javier|||0000-0003-2776-533X
  • Colmenero-Fonseca, Fabiola
  • Ros-Agulló, Ana
[EN] Decarbonising the building sector requires addressing both embodied carbon in materials and operational energy for indoor conditioning. This article critically reviews the potential of mycelium, hygromorphic wood and hemp as emerging natural materials for low-carbon construction, comparing them with conventional materials only within function-specific applications such as envelopes, insulation, non-load-bearing components and passive systems. Recent comparative literature shows that mycelium composites can reach thermal conductivities of 0.026-0.12 W/m & centerdot;K and densities of 51-280 kg/m3; in wood-mycelium formulations, an average density of 167.5 kg/m3 and climate impact of 2.13 kg CO2-eq/kg with a conventional electricity mix, reduced to 0.66 kg CO2-eq/kg with renewable energy, have been reported. Hemp shows typical densities of 140-540 kg/m3, conductivities of 0.061-0.12 W/m & centerdot;K, compressive strengths of 0.3-3.5 MPa and potentially negative climate performance of about -40 to -80 kg CO2-eq/m3, compared with +300 to +400 kg CO2-eq/m3 for conventional concrete. Hygromorphic wood is relevant not as insulation or a primary structural replacement, but as a passive actuation material for adaptive envelopes. Hemp is currently the most mature option, mycelium is promising for circular non-structural panels and insulation, and hygromorphic wood is an operational-modification strategy whose building-level energy benefits still require direct quantification. Cross-study comparisons should be interpreted as bounded ranges because composition, fabrication, testing and LCA (Life Cycle Assessment) system boundaries vary substantially across the literature., This article details some of the work carried out by the author, Q. AnguloIbáñez, in the following research projects: Zentropy-MICE. Remodelling a new concept of MICE sustainability under an urban entropy approach to enhance the legacy for Valencian citizens and optimise energy, matter, and information. Reference: EUI02-151. Commission of the European Communities; Technoeconomic Optimization of Flexible Hybrid Renewable Energy Systems Using Evolutionary Algorithms for Decarbonization in Cities (GENERGY). PAID-11-25. UPV.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Arabidopsis protein phosphatase DBP1 nucleates a protein network with a role in regulating plant defense

  • Carrasco Jiménez, José Luis
  • Castelló Llopis, María José
  • Naumann, Kai
  • Lassowskat, Ines
  • Navarrete Gomez, Maria Luisa
  • Scheel, Dierk
  • Vera Vera, Pablo
Arabidopsis thaliana DBP1 belongs to the plant-specific family of DNA-binding protein phosphatases. Although recently identified as a novel host factor mediating susceptibility to potyvirus, little is known about DBP1 targets and partners and the molecular mechanisms underlying its function. Analyzing changes in the phosphoproteome of a loss-of-function dbp1 mutant enabled the identification of 14-3-3l isoform (GRF6), a previously reported DBP1 interactor, and MAP kinase (MAPK) MPK11 as components of a small protein network nucleated by DBP1, in which GRF6 stability is modulated by MPK11 through phosphorylation, while DBP1 in turn negatively regulates MPK11 activity. Interestingly, grf6 and mpk11 loss-offunction mutants showed altered response to infection by the potyvirus Plum pox virus (PPV), and the described molecular mechanism controlling GRF6 stability was recapitulated upon PPV infection. These results not only contribute to a better knowledge of the biology of DBP factors, but also of MAPK signalling in plants, with the identification of GRF6 as a likely MPK11 substrate and of DBP1 as a protein phosphatase regulating MPK11 activity, and unveils the implication of this protein module in the response to PPV infection in Arabidopsis., This work was supported by the Spanish MICINN (Grants BFU2009-09771, EUI2009-04009 to PV), Generalitat Valenciana (Prometeo2010/020 to PV) and the German DFG (SCHE 235/15-1 to DS). The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

High-pressure optical and vibrational properties of CdGa2Se4: Order-disorder processes in adamantine compounds

  • Gomis, O.|||0000-0001-6763-0638
  • Vilaplana Cerda, Rosario Isabel|||0000-0003-0504-2157
  • Manjón, Francisco-Javier|||0000-0002-3926-1705
  • Pérez-González, E.
  • López-Solano, Javier
  • Rodríguez-Hernández, P.
  • Muñoz, Alfonso
  • Errandonea, Daniel
  • Ruiz Fuertes, Javier
  • Segura Garcia del Rio, Alfredo
  • Santamaría Pérez, David
  • Tiginyanu, Ivan
  • Ursaki, Veacheslav
High-pressure optical absorption and Raman scattering measurements have been performed in defect chalcopyrite (DC) CdGa2Se4 up to 22 GPa during two pressure cycles to investigate the pressure-induced order-disorder phase transitions taking place in this ordered-vacancy compound. Our measurements reveal that on decreasing pressure from 22 GPa, the sample does not revert to the initial phase but likely to a disordered zinc blende (DZ) structure the direct bandgap and Raman-active modes of which have been measured during a second upstroke. Our measurements have been complemented with electronic structure and lattice dynamical ab initio calculations. Lattice dynamical calculations have helped us to discuss and assign the symmetries of the Raman modes of the DC phase. Additionally, our electronic band structure calculations have helped us in discussing the order-disorder effects taking place above 6¿8 GPa during the first upstroke. © 2012 American Institute of Physics, This study was supported by the Spanish government MICINN under Grant No. MAT2010-21270-C04-01/03/04; by the Generalitat Valenciana (Project No. GV06/151), by MALTA Consolider Ingenio 2010 project (CSD2007-00045), by the Vicerrectorado de Investigacion y Desarrollo of the Universitat Politecnica de Valencia (UPV2012-1469), and by the Spanish MICINN under Project No. CTQ2009-14596-C02-01 and Comunidad de Madrid and the European Social Fund Grant No. S2009/PPQ-1551 4161893 (QUI-MAPRES). E.P-G., J.L-S., A. M., and P.R-H. acknowledge computing time provided by Red Espanola de Supercomputacion (RES) and MALTA-Cluster.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Development and multimodal characterization of an elastase-induced emphysema mouse disease model for the COPD frequent bacterial exacerbator phenotype

  • Rodríguez Arce, Irene
  • Morales, Xabier
  • Ariz Galilea, Mikel
  • Euba, Begoña
  • López López, Nahikari
  • Esparza, Maider
  • Hood, Derek W.
  • Leiva, José
  • Ortiz de Solórzano, Carlos
  • Garmendia García, Juncal
Chronic obstructive pulmonary disease (COPD) patients undergo infectious exacerbations whose frequency identifies a clinically meaningful phenotype. Mouse models have been mostly used to separately study both COPD and the infectious processes, but a reliable model of the COPD frequent exacerbator phenotype is still lacking. Accordingly, we first established a model of single bacterial exacerbation by nontypeable Haemophilus influenzae (NTHi) infection on mice with emphysema-like lesions. We characterized this single exacerbation model combining both noninvasive in vivo imaging and ex vivo techniques, obtaining longitudinal information about bacterial load and the extent of the developing lesions and host responses. Bacterial load disappeared 48 hours post-infection (hpi). However, lung recovery, measured using tests of pulmonary function and the disappearance of lung inflammation as revealed by micro-computed X-ray tomography, was delayed until 3 weeks post-infection (wpi). Then, to emulate the frequent exacerbator phenotype, we performed two recurrent episodes of NTHi infection on the emphysematous murine lung. Consistent with the amplified infectious insult, bacterial load reduction was now observed 96 hpi, and lung function recovery and disappearance of lesions on anatomical lung images did not happen until 12 wpi. Finally, as a proof of principle of the use of the model, we showed that azithromycin successfully cleared the recurrent infection, confirming this macrolide utility to ameliorate infectious exacerbation. In conclusion, we present a mouse model of recurrent bacterial infection of the emphysematous lung, aimed to facilitate investigating the COPD frequent exacerbator phenotype by providing complementary, dynamic information of both infectious and inflammatory processes., This work was supported by the Departamento de Universidad, Innovación y Transformación Digital, Gobierno de Navarra [PC150-151-152]; Ministerio de Ciencia, Innovación y Universidades (MICIU), Gobierno de España [RTI2018-096369-B-I00]; MICIU, Gobierno de España [RED2018-102469-T]; MICIU, Gobierno de España [SAF2015-66520-R]; MICIU, Gobierno de España [RTI2018-094494-B-C222]; Departamento de Salud, Gobierno de Navarra [03/2016]; Sociedad Española de Neumología y Cirugía Torácica [31/2015].
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

In vitro modeling of polyclonal infection dynamics within the human airways by Haemophilus influenzae differential fluorescent labeling

  • Rapún Araiz, Beatriz
  • Sorzabal-Bellido, Ioritz
  • Asensio López, Javier
  • Lázaro-Díez, María
  • Ariz Galilea, Mikel
  • Sobejano de la Merced, Carlos
  • Euba, Begoña
  • Fernández Calvet, Ariadna
  • Cortés Domínguez, Iván
  • Burgui Erice, Saioa
  • Toledo Arana, Alejandro
  • Ortiz de Solórzano, Carlos
  • Garmendia García, Juncal
Standardized clinical procedures for antibiotic administration rely on pathogen identification and antibiotic susceptibility testing, often performed on single-colony bacterial isolates. For respiratory pathogens, this could be questionable, as chronic patients may be persistently colonized by multiple clones or lineages from the same bacterial pathogen species. Indeed, multiple strains of nontypeable Haemophilus influenzae, with different antibiotic susceptibility profiles, can be co-isolated from cystic fibrosis and chronic obstructive pulmonary disease sputum specimens. Despite this clinical evidence, we lack information about the dynamics of H. influenzae polyclonal infections, which limits the optimization of therapeutics. Here, we present the engineering and validation of a plasmid toolkit (pTBH, toolbox for Haemophilus), with standardized modules consisting of six reporter genes for fluorescent or bioluminescent labeling of H. influenzae. This plasmid set was independently introduced in a panel of genomically and phenotypically different H. influenzae strains, and two of them were used as a proof of principle to analyze mixed biofilm growth architecture and antibiotic efficacy, and to visualize the dynamics of alveolar epithelial co-infection. The mixed biofilms showed a bilayer architecture, and antibiotic efficacy correlated with the antibiotic susceptibility of the respective single-species strains. Furthermore, differential kinetics of bacterial intracellular location within subcellular acidic compartments were quantified upon co-infection of cultured airway epithelial cells. Overall, we present a panel of novel plasmid tools and quantitative image analysis methods with the potential to be used in a whole range of bacterial host species, assay types, and¿or conditions and generate meaningful information for clinically relevant settings., J.A.-L. is funded by a PhD studentship from Regional Navarra Government, Spain, reference 0011-1408-2020-000007. C.S.M. is funded by a Formación de Profesorado Universitario PhD studentship from the Spanish Ministry of Science and Innovation (MCINN), Spain, reference FPU20/06252. This work has been funded by grants from Ministerio de Ciencia, Innovación y Universidades, Agencia Estatal de Investigación (MCIU/AEI/10.13039/50110011033) and FEDER funds EU, RTI2018-094494-BC22, PDI2021-122409OB-C22 (C.O.S.), and RTI2018-096369-B-I00, PID2021-125947OB-I00 (J.G.); from SEPAR, 875/2019 (J.G.); from Gobierno de Navarra, PC150 and PC136 (J.G.) and PC151 and PC137 (C.O.S.). CIBER is an initiative from Instituto de Salud Carlos III, Madrid, Spain. Experimental design: B.R.A., I.S.B., M.L.D., A.T.A., C.O.S., J.G.; experimental work: B.R.A., I.S.B., J.A.L., B.E., M.L.D., C.O.M., A.F.C.; data analysis: B.R.A., I.S.B., M.L.D., M.A.; writing of the manuscript: J.G., C.O.S.; correction of the manuscript: all authors; funding¿ I.C.D., S.B., C.O.S., J.G.; Funding text 2: J.A.-L. is funded by a PhD studentship from Regional Navarra Govern, Spain, reference 0011-1408-2020-000007. C.S.M. is funded by a Formación de Profesorado Universitario PhD studentship from the Spanish Ministry of Science and Innovation (MCINN), Spain, reference FPU20/06252. This work has been funded by grants from Ministerio de Ciencia, Innovación y Universidades, Agencia Estatal de Investigación (MCIU/AEI/10.13039/50110011033) and FEDER funds EU, RTI2018-094494-BC22, PDI2021-122409OB-C22 (C.O.S.), and RTI2018-096369-B-I00, PID2021-125947OB-I00 (J.G.); from SEPAR, 875/2019 (J.G.); from Gobierno de Navarra, PC150 and PC136 (J.G.) and PC151 and PC137 (C.O.S.). CIBER is an initiative from Instituto de Salud Carlos III, Madrid, Spain.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Role of Leptin in Obesity, Cardiovascular Disease, and Type 2 Diabetes

  • Vilariño-García, Teresa
  • Polonio González, María L.
  • Pérez Pérez, Antonio
  • Ribalta, Josep
  • Arrieta, Francisco
  • Aguilar Diosdado, Manuel
  • Obaya, Juan C.
  • Gimeno Orna, José A.
  • Iglesias, Pedro
  • Navarro, Jorge
  • Durán, Santiago
  • Pedro-Botet, Juan
Diabetes mellitus (DM) is a highly prevalent disease worldwide, estimated to affect 1 in every 11 adults; among them, 90–95% of cases are type 2 diabetes mellitus. This is partly attributed to the surge in the prevalence of obesity, which has reached epidemic proportions since 2008. In these patients, cardiovascular (CV) risk stands as the primary cause of morbidity and mortality, placing a substantial burden on healthcare systems due to the potential for macrovascular and microvascular complications. In this context, leptin, an adipocyte-derived hormone, plays a fundamental role. This hormone is essential for regulating the cellular metabolism and energy balance, controlling inflammatory responses, and maintaining CV system homeostasis. Thus, leptin resistance not only contributes to weight gain but may also lead to increased cardiac inflammation, greater fibrosis, hypertension, and impairment of the cardiac metabolism. Understanding the relationship between leptin resistance and CV risk in obese individuals with type 2 DM (T2DM) could improve the management and prevention of this complication. Therefore, in this narrative review, we will discuss the evidence linking leptin with the presence, severity, and/or prognosis of obesity and T2DM regarding CV disease, aiming to shed light on the potential implications for better management and preventive strategies
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Role of Leptin as a Link between Asthma and Obesity: A Systematic Review and Meta-Analysis

  • Sánchez Ortega, Helena
  • Jiménez Cortegana, Carlos
  • Novalbos Ruiz, José Pedro
  • Gómez Bastero, Ana
  • Soto Campos, José Gregorio
  • Sánchez Margalet, Víctor
Asthma and obesity are considered as highly prevalent diseases with a great impact on public health. Obesity has been demonstrated to be an aggravating factor in the pathogenesis of asthma. Adipose tissue secretes proinflammatory cytokines and mediators, including leptin, which may promote the development and severity of asthma in obese patients. This study is a systematic review and a meta-analysis based on the relationship between leptin and asthma during obesity. MEDLINE, Cochrane, EMBASE and CINAHL databases were used. Data heterogeneity was analyzed using Cochran’s Q and treatment effect with the DerSimonian and Laird method. Random effect analyses were carried out to test data sensitivity. Asymmetry was estimated using Begg’s and Egger’s tests. All studies showed significant differences in leptin levels. The effect of the measures (p < 0.001), data sensitivity (p < 0.05) and data asymmetry were statistically significant, as well as tBegg’s test (p = 0.010) and Egge’s test (p < 0.001). Despite the existing limiting factors, the results of this study support the relevant role of leptin in the pathophysiology of asthma in obese subjects. Nevertheless, further studies are needed to obtain better insight in the relationship between leptin and asthma in obesity., 13 páginas
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Biogenic calcium phosphate from fish discards and by-products

  • Fernández Arias, Mónica
  • Álvarez Olcina, Iago
  • Malvido Fresnillo, Pablo
  • Vázquez, José Antonio
  • Boutinguiza Larosi, Mohamed
  • Comesaña Piñeiro, Rafael
  • Pou Saracho, Juan Maria
Every year, millions of tons of fish waste are generated from fishing activities, and a similar amount is discarded and returned to the sea as unwanted catches. This material can be used as a biological source for many potential new added-value products, such asobtaining hyaluronic acid from fish eyeballs or extracting collagen from fish skin, but there are not many utilities for fish bones yet. This work tackles the transformation of fish discards into calcium phosphates. Discards from scorpionfish (Scorpaena scrofa) and Atlantic horse mackerel (Trachurus trachurus), as well as by-products generated from aquaculture activities (heads and trimmings frames) of salmon (Salmon salar), were used to obtain calcium phosphate. Biphasic carbonated hydroxyapatite (HA) /beta-tricalcium phosphate (TCP) material was obtained. The biphasic HA-TCP material has a promising range of applications in the biomedical field based on its similarity to calcium phosphates found in human bones in terms of crystallite size and carbonate content. The presence of Na, Mg, Sr, and K ions in the HA-TCP material is very beneficial, since they contribute to bone metabolism and cell adhesion., Xunta de Galicia | Ref. ED431C 2019/23, Xunta de Galicia | Ref. ED481D 2017/010, Xunta de Galicia | Ref. ED481B 2016/047-0, Xunta de Galicia | Ref. IN607B 2018/19, FEDER | Ref. Bluehuman (EAPA_151/2016 Interreg Atlantic Area), European Commission | Ref. H2020, Framework Research and Innovation Programme under GA n. 773330
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Nanostructured CeO2 as support of Ni-catalysts for plasma-catalytic CO2 methanation: Tailoring support’s nanomorphology towards improved performance

  • Musig, Beatrice
  • Roy, Abhijit
  • Arenal, Raúl
  • García, Tomás
  • Gálvez, María Elena
  • Navarro, María Victoria
Plasma-assisted CO2 methanation has been recently presented as a highly promising route towards the electrification of power-to-gas processes, a key step in our transition to sustainable energy generation. Interesting results have been obtained via the combination of cold plasmas – such as Dielectric Barrier Discharge – and Ni-catalysts prepared using CeO2-containing oxides as support, well known for they ability towards oxygen exchange. In the present work, the physicochemical and dielectric properties of Ni/CeO2 catalysts were tailored through the modification of the nanostructured morphology of pure CeO2, as an alternative to the use of dopants/promoters. Improved efficiency was observed in the presence of CeO2 nanoneedles and nanorods exposing 〈0 1 1〉 facets, more prompt to oxygen exchange. The lower dielectric permittivity of these materials led to a more efficient management of adsorbed species during on-plasma operation, resulting in improved plasma-catalytic behavior.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Enhanced plasma-assisted CO2 methanation on Ru/CeO2 catalysts

  • Musig, Beatrice
  • Barauna, Jairo
  • Roy, Abhijit
  • Arenal, Raul
  • Gálvez, María Elena
  • García, Tomás
  • Murillo, Ramón
  • Navarro, María Victoria
Methanation process utilizes CO₂ as a carbon feedstock for synthesizing energy carriers and value-added chemicals. The combination of methanation with plasma-catalysis has emerged as a promising avenue for the electrification of power-to-gas technologies, representing a significant development in the transition to sustainable energy systems. The present study investigates the impact of low 5 % mol Ru loading on CeO2, focusing in the role of the metal in comparison to Ni and the metal-support interactions examined using CeO2 with different structures (nanoneedles, nanopowder) and Ru dispersion within the support. The catalyst Ru/NN with nanoneedles of ceria achieved CO₂ conversion of 70 % and CH₄ selectivity of 99 % at 1CO₂/4H₂, WHSV of 30 L h−1 gcat-1, 12 kgCO2 kgcat-1 h−1 and plasma input power of 8.9 W. The enhanced plasma-catalytic activity of Ru/NN can be attributed to the increased effective H2 dissociation, beneficial physicochemical and electrical properties attributed to the choice of support and optimal metal-support interaction. The lower dielectric capacitance calculated for this catalyst is the result of reduced charge storage and a faster response to the applied electric field. This produces less intense microdischarges and a more stable and uniform plasma environment.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

CeO2-Based and Containing Catalysts for CO2 Methanation: A Short Review

  • Musig, Beatrice
  • Aznar, María
  • Gálvez, María Elena
  • Navarro, María Victoria
The great impact of carbon dioxide emissions on climate change motivates the development of technologies for carbon capture and utilization. CO2 methanation, which transforms CO2 into methane using renewable hydrogen, is a promising power-to-gas and carbon utilization pathway. Achieving high activity, strong CH4 selectivity, and long-term stability remains challenging, as well as pushes to tailor catalyst properties for the methanation reaction. Cerium oxide is therefore widely explored as a support or promoter due to its redox behaviour and oxygen vacancy chemistry. This review surveys recent literature on catalysts based and containing CeO2 applied for CO2 methanation, covering not only thermal operation but also non-conventional catalytic routes as photothermal, electrocatalytic, and plasma-assisted, with emphasis on how synthesis and role of Ce tune physicochemical properties and catalytic activity. Across reported systems, dispersing active metals (notably Ni and Ru, Cu for electrochemical systems) on ceria frequently yields to high CH4 selectivity. Redox properties of ceria enable optimal metal–support interactions and surface basicity to achieve effective CO2 activation in thermo-catalytic route. Further enhancement of oxygen mobility is associated with doped CeO2 and solid solutions such as Ce-Zr. The high oxygen storage capacity of CeO2 promotes photogenerated charge separation for light-driven performance and optimal plasma–catalyst interactions.
Docta Complutense
Publicación Artículo científico (JournalArticle)

No robust evidence of future changes in major stratospheric sudden warmings: a multi-model assessment from CCMI

  • Ayarzagüena Porras, Blanca
  • Polvani, Lorenzo M.
  • Langematz, Ulrike
  • Akiyoshi, Hideharu
  • Bekki, Slimane
  • Butchart, Neal
  • Dameris, Martin
  • Deushi, Makoto
  • Hardiman, Steven C.
  • Jöckel, Patrick
  • Klekociuk, Andrew
  • Marchand, Marion
  • Michou, Martine
  • Morgenstern, Olaf
  • O'Connor, Fiona M.
  • Oman, Luke D.
  • Plummer, David A.
  • Revell, Laura
  • Rozanov, Eugene
  • Saint-Martin, David
  • Scinocca, John
  • Stenke, Andrea
  • Stone, Kane
  • Yamashita, Yousuke
  • Yoshida, Kohei
  • Zeng, Guang
Major mid-winter stratospheric sudden warmings (SSWs) are the largest instance of wintertime variability in the Arctic stratosphere. Because SSWs are able to cause significant surface weather anomalies on intra-seasonal timescales, several previous studies have focused on their potential future change, as might be induced by anthropogenic forcings. However, a wide range of results have been reported, from a future increase in the frequency of SSWs to an actual decrease. Several factors might explain these contradictory results, notably the use of different metrics for the identification of SSWs and the impact of large climatological biases in single-model studies. To bring some clarity, we here revisit the question of future SSW changes, using an identical set of metrics applied consistently across 12 different models participating in the Chemistry–Climate Model Initiative. Our analysis reveals that no statistically significant change in the frequency of SSWs will occur over the 21st century, irrespective of the metric used for the identification of the event. Changes in other SSW characteristics – such as their duration, deceleration of the polar night jet, and the tropospheric forcing – are also assessed: again, we find no evidence of future changes over the 21st century.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Basal forebrain atrophy along the Alzheimer's disease continuum in adults with Down syndrome

  • Aranha, Mateus|||0000-0001-9594-292X
  • Iulita, M. Florencia|||0000-0002-3360-4498
  • Montal, Victor|||0000-0002-5714-9282
  • Pegueroles, Jordi|||0000-0002-3554-2446
  • Bejanin, Alexandre|||0000-0002-9958-0951
  • Vaqué-Alcázar, Lídia|||0000-0002-6776-6559
  • Grothe, Michel|||0000-0003-2600-9022
  • Carmona Iragui, Maria|||0000-0001-6914-2339
  • Videla Toro, Laura|||0000-0002-9748-8465
  • Benejam, Bessy|||0000-0002-6789-8615
  • Arranz Martínez, Javier|||0000-0003-0891-1215
  • Padilla, Concepción|||0000-0003-4102-6787
  • Valldeneu, Silvia|||0000-0003-3497-886X
  • Barroeta, Isabel|||0000-0003-2764-7923
  • Altuna-Azkargorta, Miren|||0000-0001-9709-5314
  • Fernández, Susana|||0000-0002-9777-1156
  • Ribas, Laia
  • Valle-Tamayo, Natalia|||0000-0001-9322-3710
  • Alcolea, Daniel|||0000-0002-3819-3245
  • González-Ortiz, Sofía|||0000-0003-2578-6671
  • Bargalló, Núria|||0000-0001-6284-5402
  • Zetterberg, Henrik|||0000-0003-3930-4354
  • Blennow, Kaj|||0000-0002-1890-4193
  • Blesa, Rafael|||0000-0003-4026-2884
  • Wisniewski, Thomas M.
  • Busciglio, Jorge A.
  • Cuello, AC.|||0000-0003-2143-2745
  • Lleó, Alberto|||0000-0002-2568-5478
  • Fortea, Juan|||0000-0002-1340-638X
Background: Basal forebrain (BF) degeneration occurs in Down syndrome (DS)-associated Alzheimer's disease (AD). However, the dynamics of BF atrophy with age and disease progression, its impact on cognition, and its relationship with AD biomarkers have not been studied in DS. Methods: We included 234 adults with DS (150 asymptomatic, 38 prodromal AD, and 46 AD dementia) and 147 euploid controls. BF volumes were extracted from T-weighted magnetic resonance images using a stereotactic atlas in SPM12. We assessed BF volume changes with age and along the clinical AD continuum and their relationship to cognitive performance, cerebrospinal fluid (CSF) and plasma amyloid/tau/neurodegeneration biomarkers, and hippocampal volume. Results: In DS, BF volumes decreased with age and along the clinical AD continuum and significantly correlated with amyloid, tau, and neurofilament light chain changes in CSF and plasma, hippocampal volume, and cognitive performance. Discussion: BF atrophy is a potentially valuable neuroimaging biomarker of AD-related cholinergic neurodegeneration in DS.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

The role of gender, education and family in the welfare organization, disaggregating national transfer accounts

  • Abío, Gemma|||0000-0003-4823-524X
  • Patxot, Concepció|||0000-0002-4382-0119
  • Souto Nieves, Guadalupe|||0000-0002-8056-9330
  • Istenič, Tanja|||0000-0001-5427-8102
In this paper, we extend the National Transfer Accounts (NTA) methodology to obtain the age profiles simultaneously disaggregated by gender, education level and family structure. We present the results for four countries (Austria, Spain, Finland and the UK), analysing the roles of these three dimensions in the both inter and intragenerational distribution of resources. We find interesting differences across countries, some of them related to the degree and age direction of the familiarization of different welfare state regimes. Finland excels as the country with the highest level of public transfers, and in particular for the elderly and for parents of working ages. In Austria, public transfers are also generous for children and the elderly, and there are substantial family benefits. In the UK and Spain, public transfers are much lower and family-related allowances are almost insignificant. Consequently, in Spain, private transfers from parents to children are the highest, while in the UK asset reallocations play a significant role in financing elderly consumption. Overall, our analysis provides interesting insights on how gender, redistribution policies and family structure interact with the welfare organization.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

The effect of educational expansion and family change on the sustainability of public and private transfers

  • Spielauer, Martin|||0000-0003-3138-3721
  • Horvath, Thomas|||0000-0002-6132-6229
  • Fink, Marian
  • Abío, Gemma|||0000-0003-4823-524X
  • Souto Nieves, Guadalupe|||0000-0002-8056-9330
  • Patxot, Concepció|||0000-0002-4382-0119
  • Istenič, Tanja|||0000-0001-5427-8102
This paper examines the impact of aging and related socio-economic trends (educational expansion and changes in family structure) on the sustainability of public and private transfers. For this purpose, recently available disaggregated National Transfer Accounts (NTA) are combined with dynamic microsimulation techniques to build the first dynamic microsimulation model that incorporates NTA accounting (microWELT) and is thus able to capture how agents rely on public and private transfers over their lifecycle. The model simulates the major lifetime transitions at the individual level, including education, emancipation, fertility, partnership formation and dissolution, and death. The analysis was conducted for four European countries, representative of four welfare models: Austria, Finland, Spain, and the UK. We compare sustainability indicators for the economy, the public sector, and families in the NTA tradition with enriched indicators that capture additional composition effects. When these additional composition effects are ignored, as in previous literature, we find that the Economic Support Ratio decreases more than the pure Demographic Support Ratio. In striking contrast, we show that composition effects due to educational expansion that interact with changes in family structures lead to the opposite result, alleviating the effects of demographic aging. Unlike public transfers, private transfers are only slightly affected by aging, as they are near zero for the elderly.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Measuring the lifecycle impact of welfare state policies in the face of ageing

  • Spielauer, Martin|||0000-0003-3138-3721
  • Horvath, Thomas|||0000-0002-6132-6229
  • Fink, Marian
  • Abío, Gemma|||0000-0003-4823-524X
  • Souto Nieves, Guadalupe|||0000-0002-8056-9330
  • Patxot, Concepció|||0000-0002-4382-0119
  • Istenič, Tanja|||0000-0001-5427-8102
This research investigates how the interplay between demographics, economics and welfare state transfers affects the impact of the ageing process on income redistribution, at both intra and intergenerational levels. We combine different EU comparable data sources with microsimulation techniques in order to measure how agents resort to the three available resource allocation devices over their lifecycle (asset market and public and private transfers), extending the National Transfer Accounts (NTA) methodology at the micro level. Agents are heterogeneous in age, gender, education level and family type. Simulating population dynamics at the micro level allows us to capture not only the ageing process but also the educational transition and the change in family structures occurring in parallel. The resulting projection model allows us to simulate the lifetime net transfers received by individuals from the government and the family, and to compute the adjustment needed to keep the sustainability of the welfare system. The analysis is applied to four European countries representing different welfare state regimes (Spain, Austria, Finland and the United Kingdom). We find differences in the role of private and public transfers in intra and intergenerational redistribution across countries, which can be linked to the various welfare state regimes. Apart from the expected differences observed by gender and by education level, there are significant differences in the interplay between private and public transfers related to parenthood. While parents privately transfer substantially more than childless people in all studied countries, the Austrian welfare state is the only one that compensates high and medium education groups for these differences through higher public transfers to parents. Such compensation is much weaker and more targeted towards the lower educated in the other countries.