Pasar al contenido principal

ADSORCION SELECTIVA DE COMPUESTOS NITRODERIVADOS EN SOLIDOS NANOPOROSOS. APLICACION EN LA DETECCION TEMPRANA DE EXPLOSIVOS.

CTQ2010-19276

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2010
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSIDAD DE ZARAGOZA
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Explosives Detection by Array of Si µ -Cantilevers Coated with Titanosilicate-Type Nanoporous Materials

  • Pina Iritia, M.P.
  • Almazán, F.
  • Eguizábal, A.
  • Pellejero, I.
  • Urbiztondo, M.
  • Sesé, J.
  • Santamaría, J.
  • García-Romeo, D.
  • Calvo, B.
  • Medrano, N.
An array comprising four Si µ -cantilevers coated with nanoporous functionalized ETS-10 crystals sub-micrometric in size has been developed as a multisensing platform for explosives recognition in vapor phase. The detection capabilities of the proposed device have been tested for common taggants such as 1-methyl-2-nitro-benzene (o-MNT)] and explosives (commercial detonation cord, a plastic tube filled with pentaerythritol tetranitrate (PETN); and C-4, a mixture of cyclotrimethylenetrinitramine (RDX), binders and plastifiers). The general strategy for the detection of explosives in vapor phase is based on the characteristic fingerprint each one produces as a result of the dissimilar chemical interactions between the ETS-10 coated µ -cantilevers and the target molecules emanating from the explosives and swept by ambient air. A portable lock-in amplifier has been implemented to exploit the truly benefits of the array in terms of portability, reduced size, and energy consumption. Such low-power electronic interface is capable of creating the excitation signal as well as obtaining the response values of four resonating µ -cantilevers simultaneously. The resulting sensing platform has successfully been applied for the o-MNT, PETN, and RDX detection at trace level.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Contribución de congreso (ConferenceOutput)

Portable lock-in amplifier for microcantilever based sensor array. Application to explosives detection using Co-BEA type zeolites as sensing materials

  • García-Romeo, D.
  • Calvo, B.
  • Medrano, N.
  • Pina, M.P.
  • Almazán, F.
  • Pellejero, I.
  • Urbiztondo, M.
  • Sesé, J.
  • Santamaría, J
Recent advances in microcantilever-based sensors have led to a significant increase in sensitivity, making them a competitive solution in highly demanding applications as explosives detection. However, these sensors face severe challenges related to: reliability, sensitivity, reproducibility and throughput; that have yet to be solved for commercial applications. This paper describes our efforts in this direction, particularly on the reproducible detection of nitroaromatic type explosives by means of parallelization combined with: i) nanoporous solids as sensing materials; and, ii) a portable lowpower electronic readout interface capable of both excitation and measurement of the multisensing platform. The response of the sensor array, comprising 4 microcantilevers, due to presence of 2-nitrotoluene, a common explosive taggant, has been properly monitored. The obtained results with 4 identical Co-BEA coated Si microcantilevers underline the importance of a proper sensing material degassing on the sensor performance.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Contribución de congreso (ConferenceOutput)

Explosives detection by array of Si µ-cantilevers coated with titanosilicate type nanoporous materials

  • Pina, M.P.
  • Almazán, F.
  • Eguizábal, A.
  • Pellejero, I.
  • Urbiztondo, M.
  • Sesé, J.
  • Santamaría, J.
  • García-Romeo, D.
  • Calvo, B.
  • Medrano, N.
An array comprising 4 Si microcantilevers coated with nanoporous ETS-10 crystals sub-micrometric in size has been deployed as a multisensing platform for 2-nitrotoluene (an explosive related molecule) recognition. For such purposes, the adsorption properties of synthetic microporous ETS-10 titanosilicate type materials have been tailored by means of the Si/Ti ratio, and surface grafting with organic groups (amine, imidazol). Our general strategy for vapor detection of explosives involves the combination of Si based nanoporous solids as sensing materials and resonating Si cantilevers provided with self-heating elements as tiny microbalances (mass sensitivity factors ~18 Hz/ng). Particularly for this work, ETS-10 type titanosilicates with promoted basic properties (Si/Ti=4, -NH2 anchored on the external surface) exhibit the higher affinity towards nitroaromatic derivatives as electron defficient molecules. A high remarkable hydrophilic character is shown by titanosilicates modified by covalent linkage with imidazole based organosilane (above 17% wt. water uptake at room temperature). Accounting from such versatile sorption behavior, the family of nanoporous ETS-10 crystals has been deployed by microdropping technique over the 8 Si-microcantilevers chip. By means of a portable lowpower electronic interface capable of the simultaneous excitation and measurement of 4 sensor output signals, such multisensing platform has been successfully applied for 2-nitrotoluene detection at trace level.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Portable low-power electronic interface for explosive detection using microcantilevers

  • García-Romeo, D.
  • Pellejero, I.
  • Urbiztondo, M. A.
  • Sesé, J.
  • Pina, M. P.
  • Martínez, P. A.
  • Calvo, B.
  • Medrano, N.
Microcantilevers have been recently revealed as a highly effective technique for gas detection at trace level when acting as chemical sensors. However, an important milestone still remains to achieve a full-scale development in commercial applications: the cumbersome systems traditionally used to read-out its responses. To accomplish this, a portable low-power electronic interface, based on an analog lock-in amplifier processing square signals, which is fully capable of creating the excitation signal as well as obtaining the response values from resonating microcantilevers functionalized with zeolite based coatings has been herein attempted. The so obtained read-out results are in good agreement with the commercial lock-in amplifier's measurements, demonstrating the accuracy and reliability of the electronic interface. Finally, its performance has been validated for 2-nitrotoluene (o-MNT) detection at ppm V level, as an example of an explosive-related molecule, with BEA zeolite coated microcantilevers. Theoretical limit of detection (LOD) values below 100 ppb have been obtained for Co exchanged BEA modified sensors.