Pasar al contenido principal

REACCIONES EN REACTORES ELECTROQUIMICOS EN MEDIO ALCALINO: ESTUDIOS MECANISTICOS Y CINETICOS PARA LA OPTIMIZACION DE CATALIZADORES. ANALISIS COMPARATIVO CON MEDIO ACIDO.

CTQ2011-28913-C02-02

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2011
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSIDAD DE LA LAGUNA
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Spectroelectrochemical Study of Carbon Monoxide and Ethanol Oxidation on Pt/C, PtSn(3:1)/C and PtSn(1:1)/C Catalysts

  • Rizo, Rubén
  • Lázaro, María Jesús
  • Pastor, Elena
  • García, Gonzalo
  • Rizo, Rubén|||/items/27448570-0e85-47c3-be0f-38bcb1bf11b3
PtSn-based catalysts are one of the most active materials toward that contribute ethanol oxidation reaction (EOR). In order to gain a better understanding of the Sn influence on the carbon monoxide (principal catalyst poison) and ethanol oxidation reactions in acidic media, a systematic spectroelectrochemical study was carried out. With this end, carbon-supported PtSnx (x = 0, 1/3 and 1) materials were synthesized and employed as anodic catalysts for both reactions. In situ Fourier transform infrared spectroscopy (FTIRS) and differential electrochemical mass spectrometry (DEMS) indicate that Sn diminishes the amount of bridge bonded CO (COB) and greatly improves the CO tolerance of Pt-based catalysts. Regarding the effect of Sn loading on the EOR, it enhances the catalytic activity and decreases the onset potential. FTIRS and DEMS analysis indicate that the C-C bond scission occurs at low overpotentials and at the same potential values regardless of the Sn loading, although the amount of C-C bond breaking decreases with the rise of Sn in the catalytic material. Therefore, the elevated catalytic activity toward the EOR at PtSn-based electrodes is mainly associated with the improved CO tolerance and the incomplete oxidation of ethanol to form acetic acid and acetaldehyde species, causing the formation of a higher amount of both C2 products with the rise of Sn loading.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

On the design of Pt-Sn efficient catalyst for carbon monoxide and ethanol oxidation in acid and alkaline media

  • Rizo, Rubén
  • Sebastián, David
  • Lázaro, María Jesús
  • Pastor, Elena
  • Rizo, Rubén|||/items/27448570-0e85-47c3-be0f-38bcb1bf11b3
Pt-Sn catalysts supported on carbon, with different Pt-Sn atomic ratios (3:1, 1:1, 1:3), were prepared through the formic acid method (FAM) and supported on different carbon supports (nanofibers and carbon blacks) to study their behavior toward CO stripping and ethanol oxidation reaction (EOR). PtSn/C catalysts and supports were physicochemically characterized by XRD, EDX, XPS, TEM and TPD. Good particle dispersion onto the carbon support, similar particle sizes (around 4–5 nm) and the presence of tin oxides were observed in all cases. Sn insertion favored the development of the Pt3Sn1 phase and the presence of higher oxidation states of both metals in the catalyst. Ethanol and adsorbed CO oxidation were studied at these materials both in acid and alkaline media, by linear sweep voltammetry and chronoamperometry. Higher EOR current densities were obtained with the increase in the amount of Sn in the samples, been those materials supported on CNF the ones with the best CO tolerance and catalytic activity toward this reaction. As expected, a great improvement of the EOR activity was found in alkaline media compared to sulfuric acid media, providing good expectative for these materials as catalysts for alkaline direct ethanol fuel cells.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

CO electrooxidation on Sn-modified Pt single crystals in acid media

  • Rizo, Rubén
  • Pastor, Elena
  • Koper, Marc T.M.
  • Rizo, Rubén|||/items/27448570-0e85-47c3-be0f-38bcb1bf11b3
The irreversible adsorption of Sn on the three Pt basal planes (Sn/Pt(111), Sn/Pt(100) and Sn/Pt(110)) and the oxidation of adsorbed carbon monoxide have been studied by cyclic and stripping voltammetry. The presence of Sn adatoms blocks the adsorption of hydrogen on platinum, and leads to the observation of a new oxidation peak ascribed to the four-electron oxidation of the Sn adatom at potentials above 0.5 V. The oxidation of adsorbed carbon monoxide is enhanced by the presence of Sn on all three Pt single crystals. On Sn/Pt(111) and Sn/Pt(110), oxidation of adsorbed CO occurs in two distinct potential regions: a pre-peak region at potentials below 0.50 V and the main peak at higher potentials. In the pre-peak, the oxidation of adsorbed CO is suggested to take place at the direct interface between Pt and Sn through the formation of an activated water species on Sn that is not observable in the blank voltammetry. In the main peak, the COad oxidation reaction is suggested to occur through the classical bifunctional mechanism of OH adsorbed on Sn with CO adsorbed on Pt atoms no adjacent to Sn atoms. On Sn/Pt(100), the “pre-peak mechanism” is not observed.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Stability and catalytic properties of nanostructured carbons in electrochemical environments

  • Pérez Rodríguez, Sara
  • Sebastián del Río, David
  • Lázaro Elorri, María Jesús
  • Pastor Tejera, Elena
9 Figuras. 4 Tablas. Datos suplementarios pueden encontrarse en la versión en línea del editor., This work reports a study of the electrocatalytic properties and stability of nanostructured carbon electrodes by on-line differential electrochemical mass spectrometry (DEMS). A wide electrochemical characterization in 0.1 M NaHCO3 involving anodic (carbon corrosion and oxygen evolution reaction, OER) and cathodic (CO2 reduction and hydrogen evolution reaction, HER) key reactions in energy-conversion devices was performed. DEMS studies showed that the faradaic current from 1.3 to 1.6 V vs. RHE of carbons was only associated to CO2 formation by corrosion and not to OER, the stability being improved by the graphitic character of carbon. H2 evolution was also enhanced with graphitic carbon nanofilaments, even though metal traces might positively influence their catalytic activity. By comparison of the faradaic currents and the H2 formation signals, in the absence and presence of CO2, a high inhibition of the HER was established for all carbon electrodes due to the species adsorption from CO2 reduction., The authors gratefully acknowledge financial support given by Spanish MINECO (CTQ2011‐28913‐C02‐01 and 02). S. Pérez-Rodríguez acknowledges Gobierno de Aragón for the DGA grant., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Noble metal-free catalysts supported on carbon for CO2 electrochemical reduction

  • Pérez Rodríguez, Sara
  • Pastor Tejera, Elena
  • Lázaro Elorri, María Jesús
10 figuras, 2 tablas. Datos asociados suplementarios están disponibles en la versión en línea del editor., In the present work, a wide variety of electrocatalysts, involving different metals, synthesis routes and oxidation states, have been prepared and the response towards the CO2 reduction on carbon-supported established. In particular, catalysts based on non-noble metals (Cu, Co, Fe and Ni) supported on carbon black (Vulcan XC-72R) were tested in the electrochemical reduction of CO2. Amorphous oxides of magnetite/maghemite and crystalline CuO and Cu2O oxides obtained by different methodologies were also studied. Previously, the efficiency of the catalysts for the hydrogen formation was evaluated in 0.1 M NaHCO3 since it takes place as a competitive reaction during CO2 reduction in aqueous electrolytes. By comparison of the voltammograms in the absence and presence of CO2, an inhibition of the hydrogen evolution was showed for all (metal and oxide-based) catalysts due to the adsorption of species from CO2 reduction (CO2,red). Interestingly, the CO2,red formation on Co and Fe-surfaces operating under these conditions has not been stated before. A strong current decrease, and consequently, a higher adsorbate amount, was observed on copper-oxides (75–85%) vs. the metal catalyst (45%)., The authors gratefully acknowledge financial support given by Spanish MINECO (CTQ2011-28913-C02-01 and 02) and Gobierno de Aragon (T07). S. Pérez-Rodríguez acknowledges also Gobierno de Aragón for the DGA grant. Authors thank Advanced Microscopy Laboratory at Instituto de Nanociencia de Aragón and Electronic Microscopic Service at Universidad de Zaragoza for offering access to STEM and TEM facilities, respectively., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Probing CO2 reduction intermediates employing in situ spectroscopy and spectrometry

  • Pérez Rodríguez, Sara
  • García, Gonzalo
  • Lázaro Elorri, María Jesús
  • Pastor Tejera, Elena
17 Figuras.-- Número del capítulo en postprint: 8, The electrochemical reduction of CO2 represents a promising alternative for obtaining a variety of useful products, with important applications in chemical industry or for power generation. However, finding an effective electrode for the activation and further reduction of CO2 continues being a key challenge. In addition, the reaction mechanism of the process and the involved intermediates are not fully clear as most works analyze the electrolysis products after CO2 reduction reaction, sampling the compounds in gas collectors or liquid solvents. With the main aim of generating knowledge, in situ techniques have been also used for the identification of the electrolysis products from CO2 reduction. Although these techniques are powerful tools for the elucidation of the reaction pathways, they are not commercial or recently introduced in the market and not-easy to use and, hence, these methods have not been widely employed. In the current chapter a review of the most commonly in situ techniques used for studying the CO2 electroreduction is addressed, paying special attention to the electrodes involved in the reaction. Furthermore, an explanation of the main experimental specifications is also described for an easier understanding of the method and a comparison of the in situ techniques, summarizing their advantages and disadvantages, is displayed., The authors gratefully acknowledge financial support given by Spanish MINECO (CTQ2011–28913–C02–01 and 02). GG acknowledges the Viera y Clavijo program (ACIISI & ULL) for financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrochemical reactors for CO2 reduction: From acid media to gas phase

  • Pérez Rodríguez, Sara
  • Barreras Toledo, Félix
  • Pastor Tejera, Elena
  • Lázaro Elorri, María Jesús
10 figures., An electrochemical reactor, with a membrane-electrode-assembly technology, has been developed for the electrochemical reduction of CO in gas phase. The reactor was carefully designed to prevent the strong corrosion by the high overpotentials required for addressing CO reduction. In addition, electrodes based on Fe and Pt supported on Vulcan XC-72R (the commercial carbon black often used for electrochemical applications) were used as cathode. These electrodes favor the CO confinement in the nanoporous structure of the carbon support, resulting in higher pressures at the electrocatalytic surface, and consequently, enhancing the performance. The behavior of the electrodes for CO reduction was studied in both acid media (0.5 M HSO) and in gas phase using the designed reactor in order to establish a correlation of the results. A higher current density was developed for the Pt-based electrode due to a significant formation of H by the water reduction, whereas the CO conversion could be favored on the Fe electrode, in both acid media and gas phase., The authors gratefully acknowledge financial support given by Spanish MINECO (CTQ2011-28913-C02-01 and 02). S. Pérez-Rodríguez thanks Gobierno de Aragón for the DGA grant., Peer reviewed