Pasar al contenido principal

PRODUCCION DE CATALIZADORES CON BAJOS CONTENIDOS EN METALES NOBLES PARA REACTORES ELECTROQUIMICOS EN MEDIO ALCALINO. ANALISIS COMPARATIVO CON MEDIO ACIDO.

CTQ2011-28913-C02-01

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2011
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Stability and catalytic properties of nanostructured carbons in electrochemical environments

  • Pérez Rodríguez, Sara
  • Sebastián del Río, David
  • Lázaro Elorri, María Jesús
  • Pastor Tejera, Elena
9 Figuras. 4 Tablas. Datos suplementarios pueden encontrarse en la versión en línea del editor., This work reports a study of the electrocatalytic properties and stability of nanostructured carbon electrodes by on-line differential electrochemical mass spectrometry (DEMS). A wide electrochemical characterization in 0.1 M NaHCO3 involving anodic (carbon corrosion and oxygen evolution reaction, OER) and cathodic (CO2 reduction and hydrogen evolution reaction, HER) key reactions in energy-conversion devices was performed. DEMS studies showed that the faradaic current from 1.3 to 1.6 V vs. RHE of carbons was only associated to CO2 formation by corrosion and not to OER, the stability being improved by the graphitic character of carbon. H2 evolution was also enhanced with graphitic carbon nanofilaments, even though metal traces might positively influence their catalytic activity. By comparison of the faradaic currents and the H2 formation signals, in the absence and presence of CO2, a high inhibition of the HER was established for all carbon electrodes due to the species adsorption from CO2 reduction., The authors gratefully acknowledge financial support given by Spanish MINECO (CTQ2011‐28913‐C02‐01 and 02). S. Pérez-Rodríguez acknowledges Gobierno de Aragón for the DGA grant., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Noble metal-free catalysts supported on carbon for CO2 electrochemical reduction

  • Pérez Rodríguez, Sara
  • Pastor Tejera, Elena
  • Lázaro Elorri, María Jesús
10 figuras, 2 tablas. Datos asociados suplementarios están disponibles en la versión en línea del editor., In the present work, a wide variety of electrocatalysts, involving different metals, synthesis routes and oxidation states, have been prepared and the response towards the CO2 reduction on carbon-supported established. In particular, catalysts based on non-noble metals (Cu, Co, Fe and Ni) supported on carbon black (Vulcan XC-72R) were tested in the electrochemical reduction of CO2. Amorphous oxides of magnetite/maghemite and crystalline CuO and Cu2O oxides obtained by different methodologies were also studied. Previously, the efficiency of the catalysts for the hydrogen formation was evaluated in 0.1 M NaHCO3 since it takes place as a competitive reaction during CO2 reduction in aqueous electrolytes. By comparison of the voltammograms in the absence and presence of CO2, an inhibition of the hydrogen evolution was showed for all (metal and oxide-based) catalysts due to the adsorption of species from CO2 reduction (CO2,red). Interestingly, the CO2,red formation on Co and Fe-surfaces operating under these conditions has not been stated before. A strong current decrease, and consequently, a higher adsorbate amount, was observed on copper-oxides (75–85%) vs. the metal catalyst (45%)., The authors gratefully acknowledge financial support given by Spanish MINECO (CTQ2011-28913-C02-01 and 02) and Gobierno de Aragon (T07). S. Pérez-Rodríguez acknowledges also Gobierno de Aragón for the DGA grant. Authors thank Advanced Microscopy Laboratory at Instituto de Nanociencia de Aragón and Electronic Microscopic Service at Universidad de Zaragoza for offering access to STEM and TEM facilities, respectively., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Probing CO2 reduction intermediates employing in situ spectroscopy and spectrometry

  • Pérez Rodríguez, Sara
  • García, Gonzalo
  • Lázaro Elorri, María Jesús
  • Pastor Tejera, Elena
17 Figuras.-- Número del capítulo en postprint: 8, The electrochemical reduction of CO2 represents a promising alternative for obtaining a variety of useful products, with important applications in chemical industry or for power generation. However, finding an effective electrode for the activation and further reduction of CO2 continues being a key challenge. In addition, the reaction mechanism of the process and the involved intermediates are not fully clear as most works analyze the electrolysis products after CO2 reduction reaction, sampling the compounds in gas collectors or liquid solvents. With the main aim of generating knowledge, in situ techniques have been also used for the identification of the electrolysis products from CO2 reduction. Although these techniques are powerful tools for the elucidation of the reaction pathways, they are not commercial or recently introduced in the market and not-easy to use and, hence, these methods have not been widely employed. In the current chapter a review of the most commonly in situ techniques used for studying the CO2 electroreduction is addressed, paying special attention to the electrodes involved in the reaction. Furthermore, an explanation of the main experimental specifications is also described for an easier understanding of the method and a comparison of the in situ techniques, summarizing their advantages and disadvantages, is displayed., The authors gratefully acknowledge financial support given by Spanish MINECO (CTQ2011–28913–C02–01 and 02). GG acknowledges the Viera y Clavijo program (ACIISI & ULL) for financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrochemical reactors for CO2 reduction: From acid media to gas phase

  • Pérez Rodríguez, Sara
  • Barreras Toledo, Félix
  • Pastor Tejera, Elena
  • Lázaro Elorri, María Jesús
10 figures., An electrochemical reactor, with a membrane-electrode-assembly technology, has been developed for the electrochemical reduction of CO in gas phase. The reactor was carefully designed to prevent the strong corrosion by the high overpotentials required for addressing CO reduction. In addition, electrodes based on Fe and Pt supported on Vulcan XC-72R (the commercial carbon black often used for electrochemical applications) were used as cathode. These electrodes favor the CO confinement in the nanoporous structure of the carbon support, resulting in higher pressures at the electrocatalytic surface, and consequently, enhancing the performance. The behavior of the electrodes for CO reduction was studied in both acid media (0.5 M HSO) and in gas phase using the designed reactor in order to establish a correlation of the results. A higher current density was developed for the Pt-based electrode due to a significant formation of H by the water reduction, whereas the CO conversion could be favored on the Fe electrode, in both acid media and gas phase., The authors gratefully acknowledge financial support given by Spanish MINECO (CTQ2011-28913-C02-01 and 02). S. Pérez-Rodríguez thanks Gobierno de Aragón for the DGA grant., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Palladium–nickel catalysts supported on different chemically-treated carbon blacks for methanol oxidation in alkaline media

  • Calderón Gómez, Juan Carlos
  • Nieto-Monge, María Jesús
  • Pérez Rodríguez, Sara
  • Pardo, Julián
  • Moliner Álvarez, Rafael
  • Lázaro Elorri, María Jesús
11 figures, 4 tables.-- © 2016. This manuscript version is made available under the CC-BY-NC-ND 4.0 license https://creativecommons.org/licenses/by-nc-nd/4.0/, Palladium–nickel catalysts supported on carbon blacks containing similar metal contents (25 wt. %) and Pd:Ni atomic ratios (1:1 and 1:2) were synthesized. Carbon supports were chemically treated to create different oxygen and nitrogen groups on surface. X ray patterns revealed a weak alloying between Pd and Ni, whereas crystallite sizes were between 2.1 and 3.2 nm, being consistent with the values detected by transmission electron microscopy (TEM). CO strippings demonstrated a higher poisoning tolerance of the Pd–Ni catalysts than that observed for a Pd catalyst supported on Vulcan carbon black. The methanol oxidation on Pd–Ni catalysts suggested that presence of Ni increase the activity of the materials, considering that Pd/CB exhibited the lowest methanol oxidation current densities. Nevertheless, no effects associated to the presence of surface functional groups on carbon supports were observed in the performance of this reaction., The authors want to thank the Spanish Ministry of Economy and Competitiveness and FEDER for financial support under the projects ENE2014-52518-C2-1-R and CTQ2011-28913-C02-01., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Oxidation of CO and methanol on Pd-Ni catalysts supported on different chemically-treated carbon nanofibers

  • Calderón, J.C.
  • Ráfales, M.R.
  • Nieto-Monge, M.
  • Pardo, J.I.
  • Moliner, R.
  • Lázaro, M.J.
In this work, palladium-nickel nanoparticles supported on carbon nanofibers were synthesized, with metal contents close to 25 wt % and Pd:Ni atomic ratios near to 1:2. These catalysts were previously studied in order to determine their activity toward the oxygen reduction reaction. Before the deposition of metals, the carbon nanofibers were chemically treated in order to generateoxygen and nitrogen groups on their surface. Transmission electron microscopy analysis (TEM) images revealed particle diameters between 3 and 4 nm, overcoming the sizes observed for thenanoparticles supported on carbon black (catalyst Pd-Ni CB 1:2). From the CO oxidation at different temperatures, the activation energy Eact for this reaction was determined. These values indicated a high tolerance of the catalysts toward the CO poisoning, especially in the case of the catalystssupported on the non-chemically treated carbon nanofibers. On the other hand, apparent activation energy Eap for the methanol oxidation was also determined finding—as a rate determining step—the COads diffusion to the OHads for the catalysts supported on carbon nanofibers. The results here presented showed that the surface functional groups only play a role in the obtaining of lower particlesizes, which is an important factor in the obtaining of low CO oxidation activation energies.