Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Palladium-based catalysts as electrodes for direct methanol fuel cells: a last ten years review

  • Calderón Gómez, Juan Carlos
  • Moliner Álvarez, Rafael
  • Lázaro Elorri, María Jesús
Platinum-based materials are accepted as the suitable electrocatalysts for anodes and cathodes in direct methanol fuel cells (DMFCs). Nonetheless, the increased demand and scarce world reserves of Pt, as well as some technical problems associated with its use, have motivated a wide research focused to design Pd-based catalysts, considering the similar properties between this metal and Pt. In this review, we present the most recent advancements about Pd-based catalysts, considering Pd, Pd alloys with different transition metals and non-carbon supported nanoparticles, as possible electrodes in DMFCs. In the case of the anode, different reported works have highlighted the capacity of these new materials for overcoming the CO poisoning and promote the oxidation of other intermediates generated during the methanol oxidation. Regarding the cathode, the studies have showed more positive onset potentials, as fundamental parameter for determining the mechanism of the oxygen reduction reaction (ORR) and thus, making them able for achieving high efficiencies, with less production of hydrogen peroxide as collateral product. This revision suggests that it is possible to replace the conventional Pt catalysts by Pd-based materials, although several efforts must be made in order to improve their performance in DMFCs., The authors want to thank the Spanish Ministry of Economy and Competitiveness and FEDER for financial support under the projects ENE2014-52518-C2-1-R. We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Oxidation of CO and methanol on Pd-Ni catalysts supported on different chemically-treated carbon nanofibers

  • Calderón Gómez, Juan Carlos
  • Ríos Ráfales, Miguel
  • Nieto-Monge, María Jesús
  • Pardo, Juan Ignacio
  • Moliner Álvarez, Rafael
  • Lázaro Elorri, María Jesús
In this work, palladium-nickel nanoparticles supported on carbon nanofibers were synthesized, with metal contents close to 25 wt % and Pd:Ni atomic ratios near to 1:2. These catalysts were previously studied in order to determine their activity toward the oxygen reduction reaction. Before the deposition of metals, the carbon nanofibers were chemically treated in order to generate oxygen and nitrogen groups on their surface. Transmission electron microscopy analysis (TEM) images revealed particle diameters between 3 and 4 nm, overcoming the sizes observed for the nanoparticles supported on carbon black (catalyst Pd-Ni CB 1:2). From the CO oxidation at different temperatures, the activation energy E<sub>act</sub> for this reaction was determined. These values indicated a high tolerance of the catalysts toward the CO poisoning, especially in the case of the catalysts supported on the non-chemically treated carbon nanofibers. On the other hand, apparent activation energy E<sub>ap</sub> for the methanol oxidation was also determined finding—as a rate determining step—the CO<sub>ads</sub> diffusion to the OH<sub>ads</sub> for the catalysts supported on carbon nanofibers. The results here presented showed that the surface functional groups only play a role in the obtaining of lower particle sizes, which is an important factor in the obtaining of low CO oxidation activation energies., The authors want to thank the Spanish Ministry of Economy and Competitiveness and FEDER for financial support under the projects ENE2014-52518-C2-1-R and CTQ2011-28913-C02-01. We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Palladium-nickel materials as cathode electrocatalysts for alkaline fuel cells

  • Calderón Gómez, Juan Carlos
  • Celorrio, Verónica
  • Nieto-Monge, María Jesús
  • Fermin, David J.
  • Pardo, Juan Ignacio
  • Moliner Álvarez, Rafael
  • Lázaro Elorri, María Jesús
5 figures, 3 tables.-- Supplementary material.-- © 2016. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, In this work, Pd–Ni catalysts supported on carbon nanofibers were synthesized, with metal contents and Pd:Ni atomic ratios close to 25 wt.% and 1:2, respectively. Previously, the carbon nanofibers were chemically treated, in order to create surface oxygen and/or nitrogen groups. The synthesized catalysts displayed low crystallinity degree and high dispersion on carbon supports, especially in those with surface functional groups. Oxygen reduction reaction (ORR) was studied by rotating ring-disk electrode (RRDE) techniques. When the kinetic current is normalized by the mass of Pd present in the electrode, higher activities were obtained for the synthesized materials in comparison with the activity observed for a commercial Pd/C E-TEK catalyst. Some differences are reported for the different materials under study, mainly dependent on the presence of oxygen surface groups on the carbon support. In light of the results, we can propose the synthesized catalysts as possible candidates for cathodes in alkaline direct methanol fuel cells., The authors gratefully acknowledge financial support given by Spanish MINECO (ENE2014-52518-C2-1-R). UK Catalysis Hub is kindly thanked by VC and DJF for resources and support provided via our membership of the UK Catalysis Hub Consortium and funded by EPSRC (grants EP/K014706/1, EP/K014668/1, EP/K014854/1, EP/K014714/1 and EP/M013219/1).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Palladium–nickel catalysts supported on different chemically-treated carbon blacks for methanol oxidation in alkaline media

  • Calderón Gómez, Juan Carlos
  • Nieto-Monge, María Jesús
  • Pérez Rodríguez, Sara
  • Pardo, Julián
  • Moliner Álvarez, Rafael
  • Lázaro Elorri, María Jesús
11 figures, 4 tables.-- © 2016. This manuscript version is made available under the CC-BY-NC-ND 4.0 license https://creativecommons.org/licenses/by-nc-nd/4.0/, Palladium–nickel catalysts supported on carbon blacks containing similar metal contents (25 wt. %) and Pd:Ni atomic ratios (1:1 and 1:2) were synthesized. Carbon supports were chemically treated to create different oxygen and nitrogen groups on surface. X ray patterns revealed a weak alloying between Pd and Ni, whereas crystallite sizes were between 2.1 and 3.2 nm, being consistent with the values detected by transmission electron microscopy (TEM). CO strippings demonstrated a higher poisoning tolerance of the Pd–Ni catalysts than that observed for a Pd catalyst supported on Vulcan carbon black. The methanol oxidation on Pd–Ni catalysts suggested that presence of Ni increase the activity of the materials, considering that Pd/CB exhibited the lowest methanol oxidation current densities. Nevertheless, no effects associated to the presence of surface functional groups on carbon supports were observed in the performance of this reaction., The authors want to thank the Spanish Ministry of Economy and Competitiveness and FEDER for financial support under the projects ENE2014-52518-C2-1-R and CTQ2011-28913-C02-01., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Oxidation of CO and methanol on Pd-Ni catalysts supported on different chemically-treated carbon nanofibers

  • Calderón, J.C.
  • Ráfales, M.R.
  • Nieto-Monge, M.
  • Pardo, J.I.
  • Moliner, R.
  • Lázaro, M.J.
In this work, palladium-nickel nanoparticles supported on carbon nanofibers were synthesized, with metal contents close to 25 wt % and Pd:Ni atomic ratios near to 1:2. These catalysts were previously studied in order to determine their activity toward the oxygen reduction reaction. Before the deposition of metals, the carbon nanofibers were chemically treated in order to generateoxygen and nitrogen groups on their surface. Transmission electron microscopy analysis (TEM) images revealed particle diameters between 3 and 4 nm, overcoming the sizes observed for thenanoparticles supported on carbon black (catalyst Pd-Ni CB 1:2). From the CO oxidation at different temperatures, the activation energy Eact for this reaction was determined. These values indicated a high tolerance of the catalysts toward the CO poisoning, especially in the case of the catalystssupported on the non-chemically treated carbon nanofibers. On the other hand, apparent activation energy Eap for the methanol oxidation was also determined finding—as a rate determining step—the COads diffusion to the OHads for the catalysts supported on carbon nanofibers. The results here presented showed that the surface functional groups only play a role in the obtaining of lower particlesizes, which is an important factor in the obtaining of low CO oxidation activation energies.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Carbon-based catalysts: Synthesis and applications

  • Lázaro, María Jesús
  • Ascaso, Sonia
  • Pérez-Rodríguez, Sara
  • Calderón, Juan Carlos
  • Gálvez, María Elena
  • Nieto, María Jesús
  • Moliner, Rafael
  • Boyano, Alicia
  • Sebastián, David
  • Alegre, Cinthia
  • Calvillo, Laura
  • Celorrio, Veronica
This paper summarizes the main results obtained by the Fuel Combustion Group in three applications: (1) carbon-based catalysts for the selective catalytic reduction (SCR) process of NOx, (2) Pt and Pt–Ru catalysts for direct alcohol fuel cells, (3) carbon-supported catalysts for the electroreduction of CO2. Concerning the first aspect, low-cost catalysts able to work at lower temperatures have been prepared and compared with commercial catalysts; for the second one, new catalysts for methanol and ethanol electrochemical oxidation exhibiting current densities that are double those of the commercial ones have been developed; as regards the third one, carbon-supported catalysts for the electroreduction of CO2 based on Fe and Pd were synthesized and tested. Formic acid was obtained as the main product on all Fe/C electrodes.