Pasar al contenido principal

DESARROLLO DE MEMBRANAS CERAMICAS NANOESTRUCTURADAS DE INTERCAMBIO IONICO OPTIMIZADAS PARA LOS REQUISITOS DE LOS PROCESOS ELECTROQUIMICOS

CTQ2012-37450-C02-02

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2012
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Secretaría de Estado de Investigación, Desarrollo e Innovación
Centro beneficiario UNIVERSITAT JAUME I DE CASTELLO
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Role of starch characteristics in the properties of low-cost ceramic membranes

  • Lorente-Ayza, M. Magdalena
  • Orts, M.J.
  • Mestre, Sergio
  • Pérez-Herranz, Valentín|||0000-0002-4010-0888
Starch is used as porosity generator in membranes and other porous ceramics. A study was conducted to evaluate the effects of the characteristicsof starches (impurities, particle size), obtained from potato, pea, maize and wheat, on the properties of microfiltration membranes formulated withtraditional raw materials (the ceramic matrix was composed of quartz, albite and mullite). The results indicated that the pore size distributionand the permeability coefficient of the membrane can be controlled by modifying only the particle size of starch. In this way, correlations wereobtained between surface mean diameter of starch and membrane properties (characteristic pore diameters d16and d50, and permeability coefficient).Moreover, it is necessary to use a starch having a mean particle size greater than about 50 m in order to obtain a significant change in the poresize distribution and an increase in the permeability of the membrane, The authors thank Spanish Ministerio de Economia y Competitividad for their support for the development of this research (Plan Nacional de I+D, ref. CTQ2012-37450-C02-02).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Ceramic anion-exchange membranes based on microporous supports infiltrated with hydrated zirconium dioxide

  • Martí Calatayud, Manuel César|||0000-0002-0745-1918
  • García Gabaldón, Montserrat|||0000-0003-4254-6733
  • Pérez-Herranz, Valentín|||0000-0002-4010-0888
  • Sales, Sonia
  • Mestre, Sergio
Anion-exchange membranes made from inexpensive ceramic materials were synthesized by using a simple procedure based on incorporating particles of an ion exchanger into a host microporous structure. Microporous ceramics produced from alumina and kaolin were used as supports, and their internal voids were functionalized by direct precipitation of hydrated ZrO2. The addition of starch as pore former to the sintering mixture induces the formation of pores within the micrometer range, where the subsequent deposition of hydrated ZrO2 occurred preferentially. An increase in the loading of hydrated ZrO2 particles improved the ion exchange capacity (IEC) and induced anion-selective properties on the membranes. However, when more than six infiltration cycles were performed, the membrane porosity was substantially reduced. Electrochemical measurements conducted in acidic and neutral media corroborated the implication of the hydrated ZrO2 particles on the development of concentration polarization and confirmed the strong relationship existing between the membrane porosity and electrical conductivity. Conversely, chronopotentiometric curves showed that the membranes practically lack of ion-exchange properties when tested under alkaline conditions. The methodology proposed to synthesize ceramic ion-conducting membranes could significantly broaden the utilization of electromembrane processes in industrial applications where the use of polymeric membranes is restricted due to their expensive cost or poor chemical stability., This work was financially supported by the Ministerio de Economia y Competitividad (Spain) with the project number CTQ2012-3750-C02-01/PPQ and CTQ2012-3750-C02-02/PPQ.