Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 35
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Immobilization of Proteins in Poly-Styrene-Divinylbenzene Matrices: Functional Properties and Applications

  • Rodrigues, Rafael C.
  • Hernández, Karel
  • Barbosa, Oveimar
  • Rueda, Nazzoly
  • Garcia-Galan, Cristina
  • Santos, Jose Cleiton S. dos
  • Berenguer-Murcia, Ángel
  • Fernández Lafuente, Roberto
  • Berenguer-Murcia, Ángel|||/items/ce71666d-8c9c-47fa-b876-397de66a9989
Supports based on poly-styrene-divinylbenzene (PSD) are commercially available since a long time ago. However, they are not commonly used as enzyme immobilization matrices. The main reason for this lies in the negative effect of the very hydrophobic surface on enzyme stability that produces the instantaneous enzyme inactivation in many instances. However, they have recently regained some impact in enzyme immobilization. They are easy to modify, and have been prepared with different modifiers. We will pay special attention to the coating of these supports with ionic liquids, which permits to have the ionic liquid phase anchored to the solid and modulate the enzyme properties without risk of losing these expensive and potentially toxic compounds. Thus, this review will present the covalent or physical immobilization of enzymes on PSD supports, submitted to different modifications. Moreover, lipases immobilized via interfacial activation on some naked PSD supports have shown some unexpected improvement in their catalytic properties, with uses in reactions like hydrolysis, esterification or transesterification.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Biotechnological Applications of Proteases in Food Technology

  • Tavano, Olga Luisa
  • Berenguer-Murcia, Ángel
  • Secundo, Francesco
  • Fernández Lafuente, Roberto
  • Berenguer-Murcia, Ángel|||/items/ce71666d-8c9c-47fa-b876-397de66a9989
This review presents some of the hottest topics in biotechnological applications: proteases in biocatalysis. Obviously, one of the most relevant areas of application is in the hydrolysis of proteins in food technology, and that has led to a massive use on proteomics. The aim is to identify via peptide maps the different proteins obtained after a specific protease hydrolysis. However, concepts like degradomics are also taking on a more relevant importance in the use and study of proteases and will also be discussed. Other protease applications, as seem in cleaning (detergent development), the pharmaceutical industry, and in fine chemistry, will be analyzed. This review progresses from basic areas such as protease classification to a discussion of the preparation of protease‐immobilized biocatalysts, considering the different problems raised by the use of immobilized proteases due to the peculiar features of the substrates, usually large macromolecules. Production of bioactive peptides via limited hydrolysis of proteins will occupy an important place in this review.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Stabilization of Candida antarctica Lipase B (CALB) Immobilized on Octyl Agarose by Treatment with Polyethyleneimine (PEI)

  • Peirce, Sara
  • Tacias-Pascacio, Veymar G.
  • Russo, María Elena
  • Marzocchella, Antonio
  • Virgen-Ortíz, José J.
  • Fernández-Lafuente, Roberto
Lipase B from <i>Candida antarctica</i> (CALB) was immobilized on octyl agarose (OC) and physically modified with polyethyleneimine (PEI) in order to confer a strong ion exchange character to the enzyme and thus enable the immobilization of other enzymes on its surface. The enzyme activity was fully maintained during the coating and the thermal stability was marginally improved. The enzyme release from the support by incubation in the non-ionic detergent Triton X-100 was more difficult after the PEI-coating, suggesting that some intermolecular physical crosslinking had occurred, making this desorption more difficult. Thermal stability was marginally improved, but the stability of the OCCALB-PEI was significantly better than that of OCCALB during inactivation in mixtures of aqueous buffer and organic cosolvents. SDS-PAGE analysis of the inactivated biocatalyst showed the OCCALB released some enzyme to the medium during inactivation, and this was partially prevented by coating with PEI. This effect was obtained without preventing the possibility of reuse of the support by incubation in 2% ionic detergents. That way, this modified CALB not only has a strong anion exchange nature, while maintaining the activity, but it also shows improved stability under diverse reaction conditions without affecting the reversibility of the immobilization., We thank the support from MINECO, grant CTQ2013-41507-R. The predoctoral fellowships for Miss Peirce (Universita’ degli Studi di Napoli Federico II) and Miss Tacias-Pascacio (CONACyT, Mexico) are also gratefully recognized. Virgen-Ortíz thanks CONACyT Mexico for his Postdoctoral fellowship (No. 263815). We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Agarose and Its Derivatives as Supports for Enzyme Immobilization

  • Zucca, Paolo
  • Fernández-Lafuente, Roberto
  • Sanjust, Enrico
Agarose is a polysaccharide obtained from some seaweeds, with a quite particular structure that allows spontaneous gelation. Agarose-based beads are highly porous, mechanically resistant, chemically and physically inert, and sharply hydrophilic. These features—that could be further improved by means of covalent cross-linking—render them particularly suitable for enzyme immobilization with a wide range of derivatization methods taking advantage of chemical modification of a fraction of the polymer hydroxyls. The main properties of the polymer are described here, followed by a review of cross-linking and derivatization methods. Some recent, innovative procedures to optimize the catalytic activity and operational stability of the obtained preparations are also described, together with multi-enzyme immobilized systems and the main guidelines to exploit their performances., This work was partially supported by grants from the Università di Cagliari (Contributo di Ateneo per la Ricerca, C.A.R. 2012–13–14, and PRID 2015) for P.Z. and E.S., and by MINECO from Spanish Government, (project number CTQ2013-41507-R) for R.F.-L. We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Causes of Activation and Deactivation of Modified Nanogold Catalysts during Prolonged Storage and Redox Treatments

  • Kolobova, Ekaterina
  • Kotolevich, Yulia
  • Pakrieva, Ekaterina
  • Mamontov, Grigory
  • Farías, Mario H.
  • Bogdanchikova, Nina
  • Cortés Corberán, Vicente
  • Pestryakov, Alexey
The catalytic properties of modified Au/TiO<sub>2</sub> catalysts for low-temperature CO oxidation are affected by deactivation and reactivation after long-term storage and by redox treatments. The effect of these phenomena on the catalysts was studied by HRTEM, BET, SEM, FTIR CO, XPS and H<sub>2</sub> TPR methods. The main cause for the deactivation and reactivation of catalytic properties is the variation in the electronic state of the supported gold, mainly, the proportion of singly charged ions Au<sup>+</sup>. The most active samples are those with the highest proportion of singly charged gold ions, while catalysts with a high content of trivalent gold ions are inactive at low-temperatures. Active states of gold, resistant to changes caused by the reaction process and storage conditions, can be stabilized by modification of the titanium oxide support with transition metals oxides. The catalyst modified with lanthanum oxide shows the highest stability and activity., We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI)., This work was funded by CONACYT project 260409 and PAPIIT-UNAM project IT200114 (Mexico); CSIC project 201180E104 and MINECO project CTQ2013-41507-R (Spain); and Government Program “Science” of Tomsk Polytechnic University, grant No. 4.1187.2014/K (Russia).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Identification of Subnanometric Ag Species, Their Interaction with Supports and Role in Catalytic CO Oxidation

  • Kotolevich, Yulia
  • Kolobova, Ekaterina
  • Khramov, Evgeniy
  • Cabrera Ortega, Jesús Efren
  • Farías, Mario H.
  • Zubavichus, Yan
  • Zanella, Rodolfo
  • Mota-Morales, Josué D.
  • Pestryakov, Alexey
  • Bogdanchikova, Nina
  • Cortés Corberán, Vicente
The nature and size of the real active species of nanoparticulated metal supported catalysts is still an unresolved question. The technique of choice to measure particle sizes at the nanoscale, HRTEM, has a practical limit of 1 nm. This work is aimed to identify the catalytic role of subnanometer species and methods to detect and characterize them. In this frame, we investigated the sensitivity to redox pretreatments of Ag/Fe/TiO<sub>2</sub>, Ag/Mg/TiO<sub>2</sub> and Ag/Ce/TiO<sub>2</sub> catalysts in CO oxidation. The joint application of HRTEM, SR-XRD, DRS, XPS, EXAFS and XANES methods indicated that most of the silver in all samples is in the form of Ag species with size <1 nm. The differences in catalytic properties and sensitivity to pretreatments, observed for the studied Ag catalysts, could not be explained taking into account only the Ag particles whose size distribution is measured by HRTEM, but may be explained by the presence of the subnanometer Ag species, undetectable by HRTEM, and their interaction with supports. This result highlights their role as active species and the need to take them into account to understand integrally the catalysis by supported nanometals., We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI)., This research was supported by Government Program “Science” of Tomsk Polytechnic University, Grant No. 4.1187.2014/K, CONACYT Project 260409 and PAPIIT-UNAM Project IT200114 (Mexico), CSIC project 201480E077 and MINECO Project CTQ2013-41507-R (Spain). We gratefully thank O. Martynyuk, G. Torres Otañez, Z. I. Bedolla Valdez, E. Flores, F. Ruiz Medina, A. Olivas Sarabia, I. Gradilla, J. Mendoza, E. M. Aparicio Ceja, J. Peralta, David A. Domínguez, M. Sainz, R. Valdez Castro, M. Martínez, B. Acosta Ruelas, F. Ramírez Hernández and M. López Cisneros for valuable technical assistance.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reversible Immobilization of Lipases on Heterofunctional Octyl-Amino Agarose Beads Prevents Enzyme Desorption

  • Rueda, Nazzoly
  • Albuquerque, Tiago L.
  • Bartolomé-Cabrero, Rocío
  • Fernández-López, Laura
  • Torres Sáez, Rodrigo
  • Ortiz, Claudia
  • Dos Santos, José C. S.
  • Barbosa, Oveimar
  • Fernández-Lafuente, Roberto
Two different heterofunctional octyl-amino supports have been prepared using ethylenediamine and hexylendiamine (OCEDA and OCHDA) and utilized to immobilize five lipases (lipases A (CALA) and B (CALB) from <i>Candida antarctica</i>, lipases from <i>Thermomyces lanuginosus</i> (TLL), from <i>Rhizomucor miehei</i> (RML) and from <i>Candida rugosa</i> (CRL) and the phospholipase Lecitase Ultra (LU). Using pH 5 and 50 mM sodium acetate, the immobilizations proceeded via interfacial activation on the octyl layer, after some ionic bridges were established. These supports did not release enzyme when incubated at Triton X-100 concentrations that released all enzyme molecules from the octyl support. The octyl support produced significant enzyme hyperactivation, except for CALB. However, the activities of the immobilized enzymes were usually slightly higher using the new supports than the octyl ones. Thermal and solvent stabilities of LU and TLL were significantly improved compared to the OC counterparts, while in the other enzymes the stability decreased in most cases (depending on the pH value). As a general rule, OCEDA had lower negative effects on the stability of the immobilized enzymes than OCHDA and while in solvent inactivation the enzyme molecules remained attached to the support using the new supports and were released using monofunctional octyl supports, in thermal inactivations this only occurred in certain cases., We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI)., We gratefully recognize the support from the MINECO from Spanish Government, (project number CTQ2013-41507-R). The predoctoral fellowships for Rueda (Colciencias, Colombian Government and Becas Iberoamérica “Jóvenes Investigadores”, Banco Santander) and dos Santos and Albuquerque (CNPq, Brazil) are also recognized. The authors wish to thank Ramiro Martínez (Novozymes, Spain) for kindly supplying some of the enzymes used in this research.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Desorption of Lipases Immobilized on Octyl-Agarose Beads and Coated with Ionic Polymers after Thermal Inactivation. Stronger Adsorption of Polymers/Unfolded Protein Composites

  • Virgen-Ortíz, José J.
  • Pedrero, Sara G.
  • Fernández-López, Laura
  • López-Carrobles, Nerea
  • Gorines, Beatriz C.
  • Otero Hernández, Cristina
  • Fernández-Lafuente, Roberto
Lipases from <i>Candida antarctica</i> (isoform B) and <i>Rhizomucor miehei</i> (CALB and RML) have been immobilized on octyl-agarose (OC) and further coated with polyethylenimine (PEI) and dextran sulfate (DS). The enzymes just immobilized on OC supports could be easily released from the support using 2% SDS at pH 7, both intact or after thermal inactivation (in fact, after inactivation most enzyme molecules were already desorbed). The coating with PEI and DS greatly reduced the enzyme release during thermal inactivation and improved enzyme stability. However, using OC-CALB/RML-PEI-DS, the full release of the immobilized enzyme to reuse the support required more drastic conditions: a pH value of 3, a buffer concentration over 2 M, and temperatures above 45 °C. However, even these conditions were not able to fully release the thermally inactivated enzyme molecules from the support, being necessary to increase the buffer concentration to 4 M sodium phosphate and decrease the pH to 2.5. The formation of unfolded protein/polymers composites seems to be responsible for this strong interaction between the octyl and some anionic groups of OC supports. The support could be reused five cycles using these conditions with similar loading capacity of the support and stability of the immobilized enzyme., We gratefully recognize the support from the MINECO from Spanish Government, (project numbers CTQ2013-41507-R and CTQ2016-78587-R). The authors wish to thank Ramiro Martínez (Novozymes, Spain) for kindly supplying some of the enzymes used in this research. The help and comments from Ángel Berenguer (Instituto de Materiales, Universidad de Alicante) are gratefully recognized., We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Exploiting the Versatility of Aminated Supports Activated with Glutaraldehyde to Immobilize β-galactosidase from Aspergillus oryzae

  • Zaak, Hadjer
  • Peirce, Sara
  • Albuquerque, Tiago L.
  • Sassi, Mohamed
  • Fernández-Lafuente, Roberto
The enzyme β-galactosidase from <i>Aspergillus oryzae</i> has been immobilized in aminated (MANAE)-agarose beads via glutaraldehyde chemistry using different strategies. The immobilization on MANAE-supports was first assayed at different pH values (this gave different stabilities to the immobilized enzymes) and further modified with glutaraldehyde. Dramatic drops in activity were found, even using 0.1% (<i>v</i>/<i>v</i>) glutaraldehyde. The use of a support with lower activation permitted to get a final activity of 30%, but stability was almost identical to that of the just adsorbed enzyme. Next, the immobilization on pre-activated glutaraldehyde beads was assayed at pH 5, 7 and 9. At pH 7, full, rapid immobilization and a high expressed enzyme activity were accomplished. At pH 9, some decrease in enzyme activity was observed. Direct covalent immobilization of the enzyme was very slow; even reducing the volume of enzyme/support ratio, the yield was not complete after 24 h. The stability of the biocatalyst using pre-activated supports was about 4–6 folds more stable than that of the enzyme immobilized via ion exchange at pH 5, with small differences among them. Thus, the immobilization of the enzyme at pH 7 at low ionic strength on pre-activated glutaraldehyde supports seems to be the most adequate in terms of activity, stability and immobilization rate., We gratefully recognize the support from the MINECO from Spanish Government, (project number CTQ2013-41507-R). HadjerZaak thanks the Algerian Ministry of higher education and scientific research for the fellowships. The pre-doctoral fellowships for de Albuquerque (CNPq, Brazil) and Miss Peirce (Universita’ degli Studi di Napoli Federico II) are also gratefully recognized. The help and suggestions of Ángel Berenguer (Instituto de Materiales, Universidad de Alicante) are gratefully recognized.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Design of bactericidal peptides against Escherichia coli O157:H7, Pseudomonas aeruginosa and methicillin-resistant Staphylococcus aureus, Design of antimicrobial peptides against Escherichia coli O157:H7, Pseudomonas aeruginosa and methicillin-resistant Staphylococcus aureus

  • Cruz, Jenniffer
  • Rondón-Villarreal, Paola
  • Rodrigo G. Torres
  • Urquiza, Mauricio
  • Guzmán, Fanny
  • Álvarez, Claudio
  • Abengozar, M. A.
  • Sierra, Daniel A.
  • Rivas, Luis
  • Fernández-Lafuente, Roberto
  • Ortiz, Claudia
17 p.-6 fig.-2 tab., BACKGROUND:Antimicrobial peptides are on the first line of defense against pathogenic microorganisms of many living beings. These compounds are considered natural antibiotics that can overcome bacterial resistance to conventional antibiotics. Due to this characteristic, new peptides with improved properties are quite appealing for designing new strategies for fighting pathogenic bacteria., METHODS:Sixteen designed peptides were synthesized using Fmoc chemistry; five of them are new cationic antimicrobial peptides (CAMPs) designed using a genetic algorithm that optimizes the antibacterial activity based on selected physicochemical descriptors and 11 analog peptides derived from these five peptides were designed and constructed by single amino acid substitutions. These 16 peptides were structurally characterized and their biological activity was determined against Escherichia coli O157:H7 (E. coli O157:H7), and methicillin-resistant strains of Staphylococcus aureus (MRSA) and Pseudomonas aeruginosa (P. aeruginosa) were determined., RESULTS:These 16 peptides were folded into an α-helix structure in membrane-mimicking environment. Among these 16 peptides, GIBIM-P5S9K (ATKKCGLFKILKGVGKI) showed the highest antimicrobial activity against E. coli O157:H7 (MIC=10µM), methicillin-resistant Staphylococcus aureus (MRSA) (MIC=25µM) and Pseudomonas aeruginosa (MIC=10 µM). Peptide GIBIM-P5S9K caused permeabilization of the bacterial membrane at 25 µM as determined by the Sytox Green uptake assay and the labelling of these bacteria by using the fluoresceinated peptide. GIBIM-P5S9K seems to be specific for these bacteria because at 50 µM, it provoked lower than 40% of erythrocyte hemolysis., CONCLUSION:New CAMPs have been designed using a genetic algorithm based on selected physicochemical descriptors and single amino acid substitution. These CAMPs interacted quite specifically with the bacterial cell membrane, GIBIM-P5S9K exhibiting high antibacterial activity on Escherichia coli O157:H7, methicillin-resistant strains of Staphylococcus aureus and P. aeruginosa., This project was founded by COLCIENCIAS (Project Number: 110265740828) and MINECO ((Spain project number CTQ2013-41507-R).LR was supported by grants from Subdirección General de Redes y Centros de Investigación Cooperativa-FEDER, RICET RD12/0018/0007, and RD16/0027/0010,, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Stabilizing hyperactivated lecitase structures through physical treatment with ionic polymers

  • Dos Santos, José C. S.
  • García-Galán, Cristina
  • Rodrigues, Rafael C.
  • Batista de Sant’Ana, Hosiberto
  • Gonçalves, Luciana R. B.
  • Fernández-Lafuente, Roberto
Lecitase Ultra has been covalently immobilized on cyanogen bromide cross-linked 4% agarose (CNBr) beads, maintaining 70% of the initial activity. The activity of the immobilized enzyme was improved in the presence of Triton X-100, sodium dodecyl sulfate (SDS), and cetyltrimethyl ammonium bromide (CTAB) (e.g., up to 800% when using CTAB). However, CTAB and Triton X-100 presented a negative effect on enzyme stability even at low concentrations, and SDS cannot be used for a long time at 1% concentration. To maintain the hyperactivated conformation of the enzyme in the absence of detergent, ionic polymers were added during incubation of the immobilized enzyme in the presence of detergents. Coating the immobilized enzyme with polyethylenimine in aqueous buffer (PEI) produced a 3-fold increase in enzyme activity. However, in the presence of 0.1% SDS (v/v), this coating produced a 50-fold increase in enzyme activity. Using PEI and 0.01% (v/v) CTAB, the Lecitase activity decreased to 10%. Using irreversible inhibitors, it could be shown that the PEI/SDS-CNBr-Lecitase preparation allowed its catalytic Ser to be more accessible to the reaction medium than the unmodified CNBr-Lecitase., We gratefully recognize the support from the Spanish Government, grant numbers CTQ2009-07568 and CTQ2013-41507-R and CNPq (Brazil). The predoctoral fellowships for Ms. García-Galán (Spanish Government) and Mr. dos Santos (CNPq, Brazil) are also recognized., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Amination of enzymes to improve biocatalyst performance: Coupling genetic modification and physicochemical tools

  • Rodrigues, Rafael C.
  • Barbosa, Oveimar
  • Ortiz, Claudia
  • Berenguer Murcia, A.
  • Torres Sáez, Rodrigo
  • Fernández-Lafuente, Roberto
Improvement of the features of an enzyme is in many instances a pre-requisite for the industrial implementation of these exceedingly interesting biocatalysts. To reach this goal, the researcher may utilize different tools. For example, amination of the enzyme surface produces an alteration of the isoelectric point of the protein along with its chemical reactivity (primary amino groups are the most widely used to obtain the reaction of the enzyme with surfaces, chemical modifiers, etc.) and even its “in vivo” behavior. This review will show some examples of chemical (mainly modifying the carboxylic groups using the carbodiimide route), physical (using polycationic polymers like polyethyleneimine) and genetic amination of the enzyme surface. Special emphasis will be put on cases where the amination is performed to improve subsequent protein modifications. Thus, amination has been used to increase the intensity of the enzyme/support multipoint covalent attachment, to improve the interaction with cation exchanger supports or polymers, or to promote the formation of crosslinkings (both intra-molecular and in the production of crosslinked enzyme aggregates). In other cases, amination has been used to directly modulate the enzyme properties (both in immobilized or free form). Amination of the enzyme surface may also pursue other goals not related to biocatalysis. For example, it has been used to improve the raising of antibodies against different compounds (both increasing the number of haptamers per enzyme and the immunogenicity of the composite) or the ability to penetrate cell membranes. Thus, amination may be a very powerful tool to improve the use of enzymes and proteins in many different areas and a great expansion of its usage may be expected in the near future, This work has been supported by grant CTQ2013-41507-R from Spanish MINECO, grant no. 1102-489-25428 from COLCIENCIAS and Universidad Industrial de Santander (VIE-UIS Research Program) and CNPq and FAPERGS (Brazil). A. Berenguer-Murcia thanks the Spanish Ministerio de Ciencia e Innovacion for a Ramon y Cajal fellowship (RyC-2009–03813)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Study of the antiparasitary activity of new synthetic peptides against Leishmania sp.

  • Cruz, Jenniffer
  • Ortiz, Claudia
  • Guzmán, Fanny
  • Fernández-Lafuente, Roberto
  • Rivas, Luis
  • Abengozar, M. A.
  • Torres Sáez, Rodrigo
Trabajo presentado en el 31 Congreso Latinoamericano de Química, celebrado en Lima (Perú) del 14 al 17 de octubre de 2014., La leishmaniasis es una enfermedad parasitaria endémica en el mundo. Más de 350 millones de personas en 88 países se encuentran en riesgo de infección a causa de esta enfermedad tropical desatendida. Además, no existen vacunas eficaces disponibles contra la leishmaniasis, y el control de la enfermedad se basa exclusivamente en los tratamientos terapéuticos con fármacos tóxicos, algunos de los cuales fueron desarrollados en la década de 1940. Como la resistencia del parásito se vuelve más frecuente, existe una creciente preocupación de que los fármacos que se utilizan actualmente pronto se convertirán en tratamientos ineficaces. En consecuencia, existe una necesidad urgente de desarrollar nuevas clases de compuestos que sean activos contra cepas resistentes a los medicamentos de Leishmania (L.) (Marr y col., 2012). En este contexto, los Péptidos Antimicrobianos (PAM) son moléculas efectoras clave en la inmunidad innata de los organismos. La anfipaticidad de los péptidos les permite interactuar con las membranas cargadas negativamente, causando la directa desestabilización de la superficie de las membranas con formación de poros y posterior lisis de la célula. Debido a todas estas propiedades, es que se han iniciado estudios considerando la posibilidad de utilizar esta clase de moléculas como nuevos fármacos en diferentes tipos de enfermedades infecciosas y, en particular, en el tratamiento de la Leishmaniasis, sustentados en el amplio espectro antimicrobiano que presentan los PAMs (Torrent y col., 2012). En este estudio, se sintetizaron 18 PAM (P1 a P18) y se evaluó su efecto sobre hematíes y actividad antileishmanial en promastigotes de L. donovani y amastigotes de L. pifanoi. Los PAM fueron más efectivos sobre la forma de amastigotes con valores de EC50 entre 7.8 y 50 µM. y LC50 entre 0.45 y 5.7 µM. En la forma promastigotes sólo el PAM P17 presentó un efecto leishmanicida considerable a largo plazo (72 h), con un valor del 10% de células viables. La actividad hemolítica de todos los PAM fue mayor a 50 µM para todos los casos. El mecanismo de acción de los PAM se evaluó usando las sondas de Sytox Green y Bisoxonol y se observó que todos los PAMs, a excepción del P10, causaron permeabilización de la membrana plasmática del promastigote y del amastigote. Adicionalmente, se evaluó también la concentración de ATP intracelular en promastigotes de L. donovani 3-Luc tras la adición de diferentes concentraciones de péptido. La disminución de luminiscencia fue dependiente de la concentración de péptido. Por último, se determinó la citotoxicidad de los PAM en macrófagos peritoneales, donde el P6 se destacó por presentar un 100% de células viables a 5 µM. En consecuencia, a partir de este estudio proponemos cinco PAM como prometedores candidatos leishmanicidas., Los autores deseamos agradecer al Instituto de Salud Carlos III de España por el financiamiento de los proyectos FIS PS12-02706 y RD 12/0018/0007, MINECO CTQ2013-41507-R de España, Vicerrectoría de Investigación y Extensión (VIE) de la Universidad Industrial de Santander y Colciencias de Colombia por el proyecto número 1102-5453-1671, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Synthesis, characterization and evaluation of synthetic antimicrobial peptides designed against Escherichia coli 0157: H7 and Methicillin-Resistant Staphylococcus aureus (MRSA)

  • Cruz, Jenniffer
  • Ortiz, Claudia
  • Guzmán, Fanny
  • Fernández-Lafuente, Roberto
  • Rivas, Luis
  • Abengozar, M. A.
  • Torres Sáez, Rodrigo
Trabajo presentado en el 31 Congreso Latinoamericano de Química, celebrado en Lima (Perú) del 14 al 17 de octubre de 2014., Actualmente, existe un gran interés por desarrollar nuevos antibióticos frente a bacterias patógenas. Esto se debe, esencialmente, a la creciente resistencia bacteriana. Por esta razón, en las últimas décadas, ha surgido la necesidad de obtener nuevos compuestos antimicrobianos efectivos en el tratamiento de enfermedades infecciosas de alta prevalencia e infecciones sistémicas de difícil manejo terapéutico ( Xu, Flavin, y Flavin, 2014). Recientemente, los péptidos antimicrobianos (PAM) obtenidos sintéticamente han surgido como una alternativa promisoria para el tratamiento de infecciones microbianas y muestran propiedades multifuncionales con implicaciones como agentes terapéuticos (Cruz y col., 2014). Por lo anterior, en este trabajo de investigación se llevó a cabo el diseño y síntesis de una serie de 18 péptidos con potencial actividad antibiótica. Inicialmente, se estudió la estructura de los PAM utilizando herramientas de bioinformática como: i) ¿Design and Prediction Antimicrobial Peptides¿ (DEPRAMS, por sus siglas en inglés), ii) ClustalW y iii) CPH models, entre otras, para determinar los residuos importantes asociados a la actividad antimicrobiana. Posteriormente, se sintetizaron nuevas secuencias peptídicas en fase sólida empleando la estrategia Fmoc (9-fluorenilmetoxicarbonilo). Los PAM fueron denominados como P1 a P18. Las secuencias bases y los análogos sintéticos se obtuvieron con una pureza del 95% y un perfil típico de ¿-hélice, de acuerdo con los espectros de dicroísmo circular (CD). Además, la estructura primaria de los PAM fue confirmada por espectrometría de masas MALDI-TOF. La actividad de los PAM fue evaluada en cepas patógenas de Escherichia coli 0157:H7 (E. coli O157:H7) y Staphylococcus aureus resistente a meticilina (SARM) y se obtuvieron valores de 1.5 y 2.5 µM para el péptido P17, respectivamente. La hemólisis de los PAM frente a eritrocitos de carnero en todos los ensayos no superó el 40%. Además, el mecanismo de acción de los PAM fue estudiada con la sonda aniónica de Sytox-Green, con la cual se demostró que, en general, la formación de poros transmembrana de los PAM es la forma de actuación más común, excepto para el PAM P10. Finalmente, pensamos que estos PAM pueden proponerse como una alternativa terapéutica para las infecciones causadas por SARM y E. coli O157:H7 que se podrían desarrollar y aplicar como antibióticos por sistemas de liberación controlada., Los autores deseamos agradecer al Instituto de Salud Carlos III de España por el financiamiento de los proyectos FIS PS12-02706 y RD 12/0018/0007, MINECO CTQ2013-41507-R de España, Vicerrectoría de Investigación y Extensión (VIE) de la Universidad Industrial de Santander y Colciencias de Colombia por el proyecto número 1102-5453-1671., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Bioimprinting of immobilized Lecitase via physical coating with polymers in the presence of detergents

  • Sousa dos Santos, José Cleiton
  • Rueda, Nazzoly
  • Barbosa, Oveimar
  • García-Galán, Cristina
  • Gonçalves, Luciana R. B.
  • Rodrigues, R.
  • Fernández-Lafuente, Roberto
Trabajo presentado en el VII Workshop on Biocatalysis and Biotransformations - 1º Simposio Latinoamericano de Biocatalisis y Biotransformaciones, celebrado en Búzios (Brasil) del 23 al 26 de septiembre de 2014., [Introduction]: Lipase activity in aqueous media is reduced due to the opening/closing equilibrium. Detergents may stabilize the open form of lipase, improving its activity. However, they can present some detrimental effects on enzyme stability. Coating of lipases with ionic polymers in the presence of detergents is here proposed as a tool to improve lipase performance., [Results and discussion]: Lecitase Ultra, a phospholipase A1, was covalently immobilized on Cyanogen bromide crosslinked 4 % agarose (CNBr) beads, maintaining 70% of the initial activity. The activity of the immobilized enzyme, Lecitase-CNBr, in the presence of detergents, such as Triton X-100, sodium dodecyl sulphate (SDS), cetyltrimethyl ammonium bromide (CTAB) increased, up to 800 % when using CTAB. However, CTAB and Triton-X100 presented a negative effect on enzyme stability even at low concentrations (0.01 % (v/v)) and neither SDS can be used for long times at 1 % concentration. In order to keep the hyperactivated form of the enzyme in the absence of detergent (that is deleterious for the stability), ionic polymers were added during the incubation of the immobilized enzyme in different concentrations of detergents. Coating the immobilized enzyme with polyethylenimine (PEI) produced a 3-fold increase in enzyme activity (Figure 1). However, in the presence of 0.1 % SDS (v/v), this PEI coating produced a 50-fold increase in enzyme activity2 . Using an irreversible inhibitor, the inhibition rate showed that the PEI/SDS-CNBrLecitase preparation presented its catalytic Ser more exposed to the reaction medium than the unmodified CNBr-Lecitase., [Conclusion]: The coating of immobilized Lecitase Ultra with PEI in the presence of SDS permits the stabilization of the open form of the enzyme, increasing th activity of the immobilized enzyme even by a 50 fold factor., We gratefully the Spanish Government, grant CTQ2009-07568 and CTQ2013-41507-R and CNPq (Brazil) for financial support. The authors wish to thank Ramiro Martínez (Novozymes, Spain) for kindly supplying the enzymes used in this research., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Chemical modification of lipase b of candida antarctica in solid phase for improving biochemical properties

  • Barbosa, Oveimar
  • Rueda, Nazzoly
  • Torres Sáez, Rodrigo
  • Ortiz, Claudia
  • Fernández-Lafuente, Roberto
Trabajo presentado en el VII Workshop on Biocatalysis and Biotransformations - 1º Simposio Latinoamericano de Biocatalisis y Biotransformaciones, celebrado en Búzios (Brasil) del 23 al 26 de septiembre de 2014., [Introduction]: Chemical modification of enzymes is a strategy widely used in biocatalysis for design of biocatalysts with improved biochemical properties. when the chemical modification is performed on immobilized enzymes, we can protect the enzyme from side-effects that are normally produced with modification of the soluble form of the enzymes. In this work, we modified CALB through two differentmethodologies, and the effect of these modification on the activity, stability and specificity of the enzyme was studied., [Results and discussion]: The effect of chemical modification on the enzyme activity of CALB immobilized on octyl-agarose (OC) and Cyanogen Bromide-agarose (BrCN) were evaluated. In Table 1 are shown changes in enzyme activity of CALB by chemical modification produced by modification (100%) with EDA and TNBS.In Table 2 are shown enzyme activity and enantioselectivity of the different derivatives on (R/S)-Methyl mandelate. Modification of lipase caused different activity and enatioselectivity results, demonstrating that both activity and selectivity of lipase are affected depending on the type of enzyme modification., [Conclusion]: This work exemplifies as chemical modification on solid phase allows modulating biochemical properties of lipases, affecting activity, stability and enantioselectivity of these enzymes., This work was funded by COLCIENCIAS (Project No. 1102-489-25428), Universidad Industrial de Santander (VIE-UIS) and by Ministerio de Ciencia e Innovación from Spain (CTQ2013- 41507-R ).., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Combi-lipase for heterogeneous substrates- a new approach for hydrolysis and transesterification using mixtures of biocatalysts

  • Poppe, Jakeline K.
  • Alves, Joana S.
  • Silva, Alexandre M.
  • Záchia Ayub, Marco A.
  • Fernández-Lafuente, Roberto
  • Rodrigues, Rafael C.
Trabajo presentado en el VII Workshop on Biocatalysis and Biotransformations - 1º Simposio Latinoamericano de Biocatalisis y Biotransformaciones, celebrado en Búzios (Brasil) del 23 al 26 de septiembre de 2014., [Introduction]: Combination of different enzymes is mainly used for cascade or sequential reactions, however, in the present work, is being proposed the design of a combi-lipase biocatalyst strategy for the simultaneous hydrolysis or transesterification of a mixture of different substrates.1,2 It is based on the combination of different lipases as biocatalysts in reactions using heterogeneous substrates, such vegetable oils., [Results and discussion]: The hydrolysis and the transesterification of different vegetable oils (soybean oil, olive oil and palm oil) were evaluated, and Novozym 435 (CALB), Lipozyme TL-IM (TLL), and Lipozyme RM-IM (RML) were used as biocatalysts. For each reaction and oil, it was evaluated the best mixture of lipase, and thereafter the reaction parameters (substrate molar ratio, temperature and biocatalyst content) were optimized using an experimental design. For hydrolysis of soybean oil, a mixture of 80 % of RML and 20 % of CALB was the best biocatalyst. Reaction parameters were optimized, allowing to obtain more than 80 % of hydrolysis in 24 h using the combi-lipase, up from less than 50 % when any individual lipase, as shown in Figure 1. In the transesterification, using olive oil and ethanol the best mixture was composed by 30 % TLL, 12.5 % of RML and 57.5 % of CALB, reaching to 98 % of conversion after 18 h, while using palm oil and ethanol the best mixture was 52.5 % of TLL and 47.5 % of RML, yielding 80 % after 18 h. Reusability of the combi-lipase showed that it could be used for at least 15 cycles without any significant decrease in hydrolysis, and for 7 cycles in transesterification., [Conclusion]: The concept of combi-biocatalyst might be a useful technology for reactions including full modification of heterogeneous substrates. Further studies are granted to test these preparations in continuous flow reactors., This work was supported by grants from FAPERGS and CNPq (Brazil) and CTQ2013-41507-R from Spanish MINECO. The authors would like to thank Mr. Ramiro Martínez (Novozymes, Spain) for kindly supplying the enzymes used in this research., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chemical amination of lipases improves their immobilization on octyl-glyoxyl agarose beads

  • Rueda, Nazzoly
  • Dos Santos, José C. S.
  • Ortiz, Claudia
  • Barbosa, Oveimar
  • Fernández-Lafuente, Roberto
  • Torres Sáez, Rodrigo
This paper describes a new strategy that permits to take full advantage of octyl-agarose supports to immobilize lipases (one-step purification and immobilization, stabilization of the open form of the enzyme) but that may be used in any reaction media. To this purpose, we have utilized aminated lipases and glyoxyl-octyl agarose (OCGLX). As model enzymes, we have used lipase B from Candida antarctica, lipase from Thermomyces lanuginosus and lipase from Rhizomucor miehei (RML). The amination of the enzyme may be performed in the enzymes already adsorbed on OCGLX, greatly simplifying the protocol. The immobilization was carried out at pH 5 to ensure the immobilization via interfacial activation versus the hydrophobic support, and afterwards the pH was increased to pH 9 or 10 to promote some covalent attachments. 100% of the aminated lipases became covalently immobilized on OCGLX after 2 h even at pH 9, while using unmodified enzymes some enzyme molecules could be desorbed from the support even after 24 h of incubation at pH 10, with a significantly lower cost in terms of activity. The resulting biocatalysts have a significant improved stability compared to the non-aminated OCGLX preparations. Amination in some instances presented positive effects on enzyme properties, while in other cases the effects were negative. However, the covalent immobilization at OCGLX compensated the negative effects and increases the positive ones. In some cases, the stabilization factor become 40–50 when compared with the use of non-aminated enzyme (e.g., using RML), and retained a high percentage of hydrolytic activity in the presence of acetonitrile concentration as high as 90%, where the enzyme immobilized on octyl supports could be desorbed., We gratefully recognize the support from the MINECO of Spanish Government, CTQ2013-41507-R. The predoctoral fellowships for Ms. Rueda (Colciencias, Colombian Government) and Mr. dos Santos (CNPq, Brazil) are also recognized. The authors wish to thank Mr. Ramiro Martínez (Novozymes, Spain) for kindly supplying the enzymes used in this research., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optimization of ethyl ester production from olive and palm oils using mixtures of immobilized lipases

  • Poppe, Jakeline K.
  • Matte, Carla R.
  • Ruaro Peralba, Maria do Carmo
  • Fernández-Lafuente, Roberto
  • Rodrigues, Rafael C.
  • Záchia Ayub, Marco A.
Although reactions of transesterification are generally catalyzed by one specific lipase preparation, the concept of “combi-lipase” could be better explored for the production of biodiesel, since oils are heterogeneous substrates. In this research, we tested this concept by evaluating the enzymatic transesterification of olive and palm oils, two diverse fatty acid compositions, using standalone or mixtures of three immobilized lipases as biocatalysts: Novozym 435 (CALB), Lipozyme TL-IM (TLL), and Lipozyme RM-IM (RML). For olive oil, the combination of 29.0% of TLL, 12.5% of RML, and 58.5% of CALB was the best, allowing for 95% conversion efficiency in 18 h of reaction, up from 50% for the best individual lipase (CALB). For palm oil, the best enzyme combination was 52.5% of TLL and 47.5% of RML, resulting in 80% of conversion of ethyl esters in 18 h, compared to only 44% when standalone TLL was used. Repeated batches of reaction were carried out in order to test the operational stability of the combi-lipase systems, with results showing that they could be used for at least seven cycles keeping higher than 80% of their initial activities., This work was supported by grants from Brazilian Coordenação de Aperfoiçoamento de Pessoal de Nível Superior (CAPES) and CTQ2013-41507-R from Spanish MINECO., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Strategies for the one-step immobilization-purification of enzymes as industrial biocatalysts

  • Barbosa, Oveimar
  • Ortiz, Claudia
  • Berenguer Murcia, A.
  • Torres Sáez, Rodrigo
  • Rodrigues, Rafael C.
  • Fernández-Lafuente, Roberto
In this review, we detail the efforts performed to couple the purification and the immobilization of industrial enzymes in a single step. The use of antibodies, the development of specific domains with affinity for some specific supports will be revised. Moreover, we will discuss the use of domains that increase the affinity for standard matrices (ionic exchangers, silicates). We will show how the control of the immobilization conditions may convert some unspecific supports in largely specific ones. The development of tailor-made heterofunctional supports as a tool to immobilize–stabilize–purify some proteins will be discussed in deep, using low concentration of adsorbent groups and a dense layer of groups able to give an intense multipoint covalent attachment. The final coupling of mutagenesis and tailor made supports will be the last part of the review., This work has been supported by grant CTQ2013-41507-R from Spanish MINECO, grant no.1102-489-25428 from COLCIENCIAS and Universidad Industrial de Santander (VIE-UIS Research Program) (Colombia) and CNPq grant 403505/2013-5 (Brazil). A. Berenguer-Murcia thanks the Spanish MINECO for a Ramon y Cajal fellowship (RyC-2009-03813)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Accurel MP 1000 as a support for the immobilization of lipase from Burkholderia cepacia: Application to the kinetic resolution of myo-inositol derivatives

  • Manoel, Evelin A.
  • Ribeiro, Marcela
  • Sousa dos Santos, José Cleiton
  • Coelho, Maria Alice Z
  • Simas, Alessandro B.C.
  • Fernández-Lafuente, Roberto
  • Freire, Denise Maria Guimarães
Lipase from Burkholderia cepacia (PS) has been immobilized on Accurel MP 1000, and their performance has been compared to that of the most widely used immobilized commercial preparation of this enzyme. The maximum loading was 18 mg protein/g support, and its thermal and solvent stability was much higher than that of the commercial. PS preparations were used in hydrolysis of triacetin and methyl mandelate, in the esterification of oleic acid and ethanol and in the kinetic resolution of 1,3,4-tri-O-benzyl-myo-inositol (DL-1) using vinylacetate as activated acyl donor. For all reactions studied, PS on Accurel was more active than PS-IM. The conversion in the kinetic resolution of racemic DL-1 was optimized using response surface methodology. Optimal conditions were determined to be 2.0 mg/mL of substrate, temperature of 40 °C, 2.0 mL of vinyl acetate and without water addition. Under these conditions, maximum loaded Accurel-PS preparation permitted to improve the activity in this kinetic resolution compared to the PS commercial preparation by a 55-fold factor, and compared to Novozym 435 (the most active described in literature for this reaction) by a 23-fold factor. The conversion attained was 49.9% ± 0.3 of conversion and ee of 99% after 24 h. The reusability studies showed maintenance of conversion and ee during eight cycles., We gratefully recognize the support from the MINECO of Spanish Government, by the grant CTQ2013-41507-R, and Brazilian FAPERJ, CNPq and CAPES for funding and/or fellowships, including a PVE project for R. Fernandez-Lafuente., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Evaluation of divinylsulfone activated agarose to immobilize lipases and to tune their catalytic properties

  • Sousa dos Santos, José Cleiton
  • Rueda, Nazzoly
  • Torres Sáez, Rodrigo
  • Barbosa, Oveimar
  • Gonçalves, Luciana R. B.
  • Fernández-Lafuente, Roberto
Divinylsulfone (DVS) activated agarose beads have been used to immobilize several lipases, those from Pseudomonas flourescens, Rhizomucor miehei, and Thermomyces lanuginosus (TLL), as well as the artificial chimeric phospholipase Lecitase Ultra. The best results in terms of activity recovery and immobilization yield were achieved using TLL. This enzyme could be immobilized at pH from 5 (with poor yield) to pH 10 (with 100% yield). The incubation of the immobilized enzymes for 72 h at pH 10 before the blocking step (using ethylenediamine) improved the enzyme stability whatever the immobilization pH value, but the stabilization achieved in each case depended on the immobilization pH value, and also on the inactivation conditions. The enzyme activities versus different substrates were very dependent on the immobilization protocol and the conditions of activity determination. That way, TLL immobilized at pH 5 on DVS activated support was the most active versus methyl mandelate, even more active than TLL immobilized on octyl-agarose (between 3 and 7 fold factors depending on the pH of measure). Using ethyl hexanoate the most active preparation was the octyl-TLL preparation. The most active among the enzymes immobilized in DVS-activated supports was that just immobilized at pH 5 if the activity was determined at pH 7 or 8.5, while at pH 5 the most active was that enzyme but after incubation at pH 10. The results show that this support may be very useful for tuning lipase properties just by altering the first immobilization pH value, and that the further incubation at pH 10 improved enzyme stability, and in some cases, even increased activity., We gratefully recognize the support from the Spanish Government, grant CTQ2013-41507-R. The predoctoral fellowships for Mr dos Santos (CNPq, Brazil) and Ms Rueda (Colciencias, Colombia) are also recognized., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Immobilization of lipases on glyoxyl-octyl supports: Improved stability and reactivation strategies

  • Suescun, Angélica
  • Rueda, Nazzoly
  • Sousa dos Santos, José Cleiton
  • Castillo, John J.
  • Ortiz, Claudia
  • Torres Sáez, Rodrigo
  • Barbosa, Oveimar
  • Fernández-Lafuente, Roberto
Lipases from Candida rugosa (CRL) and from Candida antarctica (isoform A) (CALA) have been successfully immobilized on octyl–glyoxyl agarose (OCGLX) beads and compared to the octyl–agarose (OC) or glyoxyl (GLX) beads immobilized counterparts. Immobilization on OCGLX gave similar hyperactivations than those found for the immobilization on OC supports, although the incubation at pH 10.0 for 4 h decreased the activity of both enzymes by 25%. After reduction, more than 95% of the enzyme activity was covalently attached to the support. The fraction not covalently attached was desorbed by washing with detergent. These biocatalysts were more stable than the octyl counterparts in thermal or organic solvent inactivation. More interestingly, the irreversible immobilization permitted the reactivation of CALA biocatalysts inactivated by incubation in organic solvent, after unfolding in the presence of guanidine and refolding in aqueous buffer (around 55% of the activity could be recovered during 3 successive cycles of inactivation/reactivation). GLX–CALA permitted to recover 75% of the activity, but the thermal stability and activity was much lower, and this strategy could not be applied to CRL. Neither the enzyme immobilized on cyanogen bromide nor the enzyme immobilized on OCGLX exhibited significant activity after the unfolding/refolding strategy., We gratefully recognize the support from the MINECO of Spanish Government, CTQ2013-41507-R. The predoctoral fellowships for Ms. Rueda (Colciencia, Colombian Goberment) and Mr dos Santos (CNPq, Brazil) are also recognized., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enzymatic production and characterization of potential biolubricants from castor bean biodiesel

  • Cavalcanti da Silva, José André
  • Ferreira Soares, Valéria
  • Fernández-Lafuente, Roberto
  • Habert, Alberto Cláudio
  • Freire, Denise Maria Guimarães
Biodegradable lubricants (esters) are a logical solution to avoid the environmental threat of mineral lubricants disposal. This research reports the enzymatic synthesis and characterization of new biodegradable lubricants obtained via the transesterification of different methyl fatty acids esters (biodiesels produced from castor, soybean and jatropha oils) and 2-(hydroxymethyl)-2-ethylpropane-1,3-diol or trimethylolpropane (TMP). Different lipases have been compared in their performance to catalyze these reactions. The best lipase depended on the substrate, but a lipase from Candida rugosa and castor oil were selected due to the promising properties of the final product. After optimizing the experimental parameters of the processes, the optimal values were: enzyme content: 4.0%, water content: 1.0%, molar ratio castor oil biodiesel/TMP: 3.915:1, temperature: 40 °C and residence time: 24 h. Under these conditions, a conversion yield higher than 95% was obtained. This product is a promising biolubricant (very rich in ricinoleic acid) which was characterized and exhibited better lubricant properties than the products achieved using the other materials: viscosities of 290.2 mm2/s (at 40 °C) and 28.46 mm2/s (at 100 °C), and a viscosity index of 132. This work has indicated the feasibility of the proposed route for a new biolubricant with better properties than the previously described., We gratefully recognize the support from the MINECO of Spanish Government; by the grant CTQ2013-41507-R; and Brazilian FAPERJ; CNPq and CAPES for funding and/or fellowships; including a PVE project for R. Fernandez-Lafuente., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Immobilization of lipases on hydrophobic supports involves the open form of the enzyme

  • Manoel, Evelin A.
  • Sousa dos Santos, José Cleiton
  • Freire, Denise Maria Guimarães
  • Rueda, Nazzoly
  • Fernández-Lafuente, Roberto
The lipases from Thermomyces lanuginosus and Pseudomonas cepacia have been immobilized on octyl and cyanogen bromide (CNBr) agarose beads. The immobilization on octyl-agarose is slowed with increasing ionic strength, The lipases from Thermomyces lanuginosus and Pseudomonas cepacia have been immobilized on octyl and cyanogen bromide (CNBr) agarose beads. The immobilization on octyl-agarose is slowed with increasing ionic strength, while the immobilization on CNBr is not significantly affected by the ionic strength. The inhibition of the immobilized preparations with diethyl p-nitrophenylphosphate (D-pNPP) was analyzed. The inhibition was more rapid using octyl-lipase preparations than using covalent preparations, and the covalent preparations were much more sensitive to the reaction medium. The addition of detergent increased the inhibition rate of the covalent preparation while an increase on the ionic strength produced a slowdown of the inhibition rate by D-pNPP for both lipases. The effect of the medium on the activity versus fully soluble substrate (methyl mandelate) was in the same direction. The octyl preparations presented a slight decrease in activity when comparing the results using different concentrations of sodium phosphate buffer (between 0.025 and 1 M), while the CNBr preparations suffered drastic drops in its activity at high ionic strength.The results confirm that the lipases immobilized on octyl agarose presented their open form stabilized while the covalent preparation maintains a closing/opening equilibrium that may be modulated by altering the medium., We gratefully recognize the support from the MINECO of Spanish Government, by the grant CTQ2013-41507-R, CNPq (PVE 301139/2014-8) and FAPERJ. The predoctoral fellowships for Ms. Rueda (Colciencias, Colombian Government) and Mr. dos Santos (CNPq, Brazil) are also recognized., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Importance of the Support Properties for Immobilization or Purification of Enzymes

  • Sousa dos Santos, José Cleiton
  • Barbosa, Oveimar
  • Ortiz, Claudia
  • Berenguer Murcia, A.
  • Rodrigues, Rafael C.
  • Fernández-Lafuente, Roberto
Immobilization and purification of enzymes are usual requirements for their industrial use. Both purification and immobilization have a common factor: they use a solid activated support. Using a support for enzyme purification means having mild conditions for enzyme release and a selective enzyme–support interaction is interesting. When using a support for immobilization, however, enzyme desorption is a problem. The improvement of enzyme features through immobilization is a usual objective (e.g., stability, selectivity). Thus, a support designed for enzyme purification and a support designed for enzyme immobilization may differ significantly. In this review, we will focus our attention on the requirements of a support surface to produce the desired objectives. The ideal physical properties of the matrix, the properties of the introduced reactive groups, the best surface activation degree to reach the desired objective, and the properties of the reactive groups will be discussed., We gratefully recognize the support from the Spanish Government, CTQ2013‐41507‐R, Colciencia (Colombia) and CNPq (Brazil). The predoctoral fellowships for Mr dos Santos (CNPq, Brazil) are also recognized. Á. Berenguer‐Murcia thanks the Spanish Ministerio de Ciencia e Innovación for a Ramón y Cajal fellowship (RyC‐2009‐03813). The authors wish to thank Mr. Ramiro Martínez (Novozymes, Spain) for his continuous support to our research., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Improved performance of lipases immobilized on heterofunctional octyl-glyoxyl agarose beads

  • Rueda, Nazzoly
  • Sousa dos Santos, José Cleiton
  • Torres Sáez, Rodrigo
  • Ortiz, Claudia
  • Barbosa, Oveimar
  • Fernández-Lafuente, Roberto
A new heterofunctional support, octyl-glyoxyl agarose, is proposed in this study. The supports were prepared by simple periodate oxidation of the commercial octyl-agarose, introducing 25 μmol of glyoxyl groups per wet gram of support. This support was assayed with three different lipases (those from Candida antarctica (form B), Thermomyces lanuginosus (TLL) or Rhizomucor miehei) and the artificial phospholipase Lecitase Ultra. Used at pH 7, the new support maintained as first immobilization step the lipase interfacial activation. Thus, it was possible to have the purification and immobilization of the enzyme in one step. Moreover, stabilization of the open form of the lipase was achieved. The covalent enzyme/support bonds cannot be obtained if the immobilized enzyme was not incubated at alkaline pH value. This incubation at pH 10 of the previously immobilized enzymes produced a smaller decrease in enzyme activity when compared to the direct immobilization of the enzymes on glyoxyl-agarose at pH 10, because the immobilization via interfacial activation promoted a stabilization of the lipases. Except in the case of TLL (covalent attachment involved 70% of the enzyme molecules), covalent immobilization yield was over 80%. The non-covalent attached enzyme molecules were discarded by washings with detergent solutions and the new biocatalysts were compared to the octyl-agarose immobilized enzymes. While the stability in thermal and organic solvents inactivations was increased for Lecitase Ultra, CALB and RML, TLL improved its stability in organic media but its thermal stability decreased after covalent attachment of the interfacially activated enzyme. This stabilization resulted in octyl-glyoxyl-lipase preparations which presented higher activity in the presence of organic solvents. Finally, while octyl-agarose released enzyme molecules after incubation at high temperatures or in the presence of organic solvents and detergents, the covalently immobilized enzyme remained attached to the support even after boiling the enzyme in SDS, eliminating the risks of product contamination., We gratefully recognize the support from the MINECO of Spanish Government, CTQ2013-41507-R. The predoctoral fellowships for Ms. Rueda (Colciencia, Colombian Goberment) and Mr dos Santos (CNPq, Brazil) are also recognized., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optimization and characterization of CLEAs of the very thermostable dimeric peroxidase from Roystonea regia

  • Morales, Alba
  • Barbosa, Oveimar
  • Rueda, Nazzoly
  • Fonseca, Zayda
  • Torres Sáez, Rodrigo
  • Rodrigues, Rafael C.
  • Ortiz, Claudia
  • Fernández-Lafuente, Roberto
This paper describes the optimization of the immobilization of the peroxidase from Roystonea regia (RPTP) using the technique of the crosslinking enzyme aggregates. The immobilization was optimized using response surface methodology and after evaluating three different precipitants, ethanol was finally selected. Three variables were analyzed, glutaraldehyde concentration, precipitant concentration and time before collecting the RPTP-CLEAs. The immobilization yield was around 75%. The activity of the RPTP-CLEA was very high, this was even more patent at pH 3, where the free RPTP was fully inactive and the RPTP-CLEA maintained 40% of the maximum activity. In stress inactivations, the RPTP-CLEA maintained the very high thermostability that presented the free enzyme at 90 °C and pH 7 (half-live of 50 min). At pH 3, the free enzyme suffered subunit dissociation as a first step of the inactivation, this is not possible using RPTP-CLEAs and provided a very high thermostabilization (that depends on the enzyme concentration). The stability of the enzyme in the presence of hydrogen peroxide is good at low concentrations of this reagent (e.g., 10 mM), but if the concentration is higher (e.g., 300 mM), the enzyme stability drops. The immobilization provides an improved stability in the presence of this oxidant, but the values reached may not be high enough for some applications. The RPTP-CLEAs may be used for the decoloration of methyl orange solutions using 5 mM of hydrogen peroxide for 4 cycles (4 h each cycle) without apparent decrease in activity (but only degrading around 50% of the substrate). Using 225 mM of this oxidative reagent, the activity slowly decreased after each cycle (but enabling the full destruction of the colorant). This immobilized enzyme may be used even at pH 3 and 225 mM hydrogen peroxide, conditions where the free enzyme is completely inactive., We gratefully recognize the support from the MINECO of Spanish Government, CTQ2013-41507-R and project 1391 from the Department of research and extension of the Health facultyUIS. The predoctoral fellowship for Ms Rueda (Colciencia, Colombian Government)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Production and immobilization of Geotrichum candidum lipase via physical adsorption on eco-friendly support: Characterization of the catalytic properties in hydrolysis and esterification reactions

  • Ramos, Elisa Z.
  • Júnior, R.H.M.
  • Castro, Patricia F. de
  • Tardioli, Paulo W.
  • Mendes, Adriano A.
  • Fernández-Lafuente, Roberto
  • Hirata, Daniela B
The present study reports the production of an extracellular lipase from Geotrichum candidum by submerged fermentation using cottonseed oil as inductor agent and its immobilization on poly-hydroxybutyrate (PHB) particles via physical adsorption. The catalytic properties of the biocatalyst prepared were determined in aqueous (hydrolysis of olive oil emulsion) and organic (ethyl linoleate synthesis) media. In the enzyme production, maximum hydrolytic activity of 22.91 IU/mL at 30 °C and pH 5.2 was reached after 48 h of cultivation. A single protein band with an apparent molecular mass of 65 kDa was detected by SDS-PAGE analysis. The biocatalyst prepared by offering 75 mL of crude enzymatic extract (without cells) per gram of support exhibited maximum hydrolytic activity of 404.4 ± 2.3 IU/g at 37 °C and pH 7.0, with a recovered activity percentage of around 40% and an immobilization yield of 59%. The optimal pH and temperature for both soluble and immobilized enzyme in the hydrolysis reaction was 8.0 and around 37–40 °C. The biocatalyst was more thermally stable than the crude enzymatic extract at 35 °C in 8 h (46.2% and 23.7%, respectively) and slightly more stable at 45 °C in 40 min (47.5% and 35.2%, respectively). In the esterification reaction, around 70% ester conversion was reached after 2 h of reaction under experimental conditions previously optimized by Central Composite Rotatable Design (CCRD). The biocatalyst retained 93% of its initial esterification activity after 6 successive cycles of esterification reaction. This biocatalyst is a promising one to catalyze reactions in aqueous and organic media., The authors are grateful to FAPEMIG (Process number APQ–00968–12), CNPq (Process number 475289/2012–9) and UNIFAL-MG for the IC fellowships of the students, and the MINECO of Spanish Government, by the grant CTQ2013-41507-R., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reactivation of lipases by the unfolding and refolding of covalently immobilized biocatalysts

  • Rueda, Nazzoly
  • Sousa dos Santos, José Cleiton
  • Torres Sáez, Rodrigo
  • Barbosa, Oveimar
  • Ortiz, Claudia
  • Fernández-Lafuente, Roberto
Lipases from Candida antarctica (isoform B) (CALB) and Thermomyces lanuginosus (TLL) have been immobilized either covalently or by interfacial activation versus an octyl support, followed by covalent attachment by glyoxyl groups using octyl–glyoxyl agarose beads (OCGLX). These biocatalysts have been submitted to successive cycles of unfolding by incubation in 9 M guanidine and refolding by incubation in aqueous 100 mM phosphate buffer at pH 7, before and after total inactivation in the presence of organic solvents. The four preparations have been reactivated to some extent using this strategy, but the results depended on the method of preparation. Glyoxyl-immobilized CALB may recover 100% of its activity versus p-nitrophenyl butyrate, but after solvent inactivation the recovery of activity was reduced to 95%. The pure covalent TLL preparation recovered around 80% of its activity, either before or after solvent inactivation. Both enzymes showed less recovery of activity using OCGLX, as might be expected from the hydrophobic nature of the supporting groups (60% for CALB and 45% for TLL). In addition, using enzymes previously inactivated by solvent, recovery decreased by 5–10%. These values were maintained through three successive cycles. However, using R- and S-methyl mandelate, it was clear that recovery of activity decreased with further reactivation cycles. Taken as a whole, the unfolding and refolding effect may be used to recover a degree of enzyme activity. This is relevant in terms of application, as it may allow the enzyme preparations to be used for a longer period. However, to reach a similar enzyme structure in each reactivation cycle, it will be necessary to undertake further studies involving the use of other supports in order to improve the unfolding and refolding steps., We are grateful for the support provided by the MINECO of Spanish Government, CTQ2013–41507 R. The predoctoral fellowships for Ms Rueda (Colciencias, Colombian Government) and Mr dos Santos (CNPq, Brazil) are also acknowledged., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Stabilizing effects of cations on lipases depend on the immobilization protocol

  • Fernández-López, Laura
  • Bartolomé-Cabrero, Rocío
  • Rodriguez, María Daniela
  • Sousa dos Santos, José Cleiton
  • Rueda, Nazzoly
  • Fernández-Lafuente, Roberto
The effect of an additive on enzyme stability used to be considered an intrinsic feature of a lipase. However, in this paper we have found that the effect of additive on enzyme stability depends on the immobilization protocol. After assaying the effects of diverse chloride salts with different cations on different lipases activity, no relevant effect was detected. Free enzymes or the covalently immobilized enzymes are not stabilized by these cations for any of the studied lipases. However, Mn2+ and Ca2+ (at a concentration of 5 mM) are able to greatly stabilize the lipases from Rhizomucor miehei (RML) and Candida rugosa (CRL) when they are present during the inactivation, but only if the enzymes are immobilized on octyl-agarose (stabilization factor ranging from 20 to 50). The effect was only detected when using more than 2.5 mM of the cations, and reached the maximum value at 5 mM, suggesting a saturation mechanism of action. The stabilization seemed to be based on a specific mechanism, and required the recognition sites to be saturated by the cations. Mg2+ has no effect on enzyme stability for both enzymes, but it is able to suppress the stabilization promoted by the other two cations using CRL; while it has no effect on the cation stabilization when using RML. This is the first report of a cation induced enzyme stabilization effect that depends on the lipase immobilization protocol., We gratefully recognize the support from the MINECO from Spanish Government, (project number CTQ2013-41507-R). The predoctoral fellowships for Ms Rueda (Colciencias, Colombian Government and Becas Iberoamérica “Jóvenes Investigadores”, Banco Santander) and for Ms Rodríguez (CONICET and SPU, Argentine Government) and Dr dos Santos (CNPq, Brazil) are also recognized., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Selectivity control in oxidation of 1-tetradecanol on supported nano Au catalysts

  • Martínez-González, Susana
  • Ivanova, Svetlana
  • Domínguez, M. I.
  • Cortés Corberán, Vicente
Selective oxidation of tetradecanol, a model higher fatty alcohol, on Au/CeO-AlO catalyst has been investigated to assess the factors that control selectivity. The analysis of the effect of operation conditions (temperature, run time and alcohol/metal (A/M) ratio) on catalytic performance revealed a quite complex reaction network, in which acid formation starts only after a certain level of conversion is reached. This level depends linearly on the total support surface available, indicating that it must be saturated by species generated by the reaction itself to allow acid formation to start. Addition of water to reaction medium did not modify this level, indicating that such species is not adsorbed water, as previously hypothesized, but probably spilled over hydrogen species. The resulting drastic change in the selectivity trends makes the ratio A/M a critical factor to control selectivity to aldehyde and to acid. Selectivity to ester is less sensible to operation parameters. It is noteworthy that aldehyde yields up to 27% with 90% selectivity, and acid yields up to 40% with 81% selectivity can be reached by proper selection of operation parameters., Funding of this work by CSIC (project 201480E070) and MINECO (project CTQ2013-41507-R) is greatfully acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tuning the catalytic properties of lipases immobilized on divinylsulfone activated agarose by altering its nanoenvironment

  • Sousa dos Santos, José Cleiton
  • Rueda, Nazzoly
  • Gonçalves, Luciana R. B.
  • Fernández-Lafuente, Roberto
Lipase from Thermomyces lanuginosus (TLL) and lipase B from Candida antarctica (CALB) have been immobilized on divinylsulfone (DVS) activated agarose beads at pH 10 for 72 h. Then, as a reaction end point, very different nucleophiles have been used to block the support and the effect of the nature of the blocking reagent has been analyzed on the features of the immobilized preparations. The blocking has generally positive effects on enzyme stability in both thermal and organic solvent inactivations. For example, CALB improved 7.5-fold the thermal stability after blocking with imidazole. The effect on enzyme activity was more variable, strongly depending on the substrate and the experimental conditions. Referring to CALB; using p-nitrophenyl butyrate (p-NPB) and methyl phenylacetate, activity always improved by the blocking step, whatever the blocking reagent, while with methyl mandelate or ethyl hexanoate not always the blocking presented a positive effect. Other example is TLL-DVS biocatalyst blocked with Cys. This was more than 8 times more active than the non-blocked preparation and become the most active versus p-NPB at pH 7, the least active versus methyl phenylacetate at pH 5 but the third one most active at pH 9, versus methyl mandelate presented lower activity than the unblocked preparation at pH 5 and versus ethyl hexanoate was the most active at all pH values. That way, enzyme specificity could be strongly altered by this blocking step., We gratefully recognize the support from the Spanish Government, grant CTQ2013-41507-R. The predoctoral fellowships for Mr dos Santos (CNPq, Brazil) and Ms Rueda (Colciencias, Colombia) are also recognized. The authors wish to thank Mr. Ramiro Martínez (Novozymes, Spain) for kindly supplying the enzymes used in this research., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Versatility of divinylsulfone supports permits the tuning of CALB properties during its immobilization

  • Sousa dos Santos, José Cleiton
  • Rueda, Nazzoly
  • Sánchez, Alfredo
  • Gonçalves, Luciana R. B.
  • Fernández-Lafuente, Roberto
The lipase B from C. antarctica (CALB) has been immobilized on divinylsulfone (DVS) activated agarose beads under different conditions (pH 5–10). In the presence of 0.3% Triton X-100, the immobilization rate was rapid at pH 10 and the slowest one was at pH 5. Incubation at pH 10 for 72 h of the immobilized enzymes before blocking of the support with ethylenediamine permitted improvement of the enzyme stability. Enzyme features (activity, stability, specificity versus different substrates, effect of the pH on enzyme properties) were quite different on the different CALB preparations, suggesting the different orientation of the enzyme. The alkaline incubation produced an increase in enzyme activity with some substrates, and some of the DVS-CALB preparations exhibited a higher specific activity than the octyl-preparations. The indirect fluorescence spectrum of the different immobilized preparations confirmed that different structures of the CALB molecules were generated after immobilization., We gratefully recognize the support from the MINECO of Spanish Government, by the grant CTQ2013-41507-R. The predoctoral fellowships for Ms Rueda (Colciencias, Colombian Goberment) and Mr dos Santos (CNPq, Brazil) are also recognized., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Selective synthesis of partial glycerides of conjugated linoleic acids via modulation of the catalytic properties of lipases by immobilization on different supports

  • Verdasco-Martín, Carlos M.
  • García-Verdugo, Eduardo
  • Porcar, Raúl
  • Fernández-Lafuente, Roberto
  • Otero Hernández, Cristina
Lipases B from Candida antarctica (CALB), Rhizomucor miehei (RML) and Thermomyces lanuginosus (TLL) were immobilized on octadecyl methacylate (OM) or octadecyl methacrylate (OMC) beads. Their specific activity and regioselectivity were studied in the synthesis of conjugated linoleic acid (CLA) partial glycerides, which presented nutraceutical properties. TLL derivatives were poor catalysts. Novozym® 435 was much better than Lipozyme® RM IM. RML activity (a GRAS enzyme) was modulated via immobilization. After only 3 h, OM−RML gave the highest CLA conversion (54% at 40 °C with 1:3 M ratio of glycerol to CLA). OM-RML reduced by a factor of 3.12 and 1.16 the activation energy of the reaction with Lipozyme® RM IM and Novozym® 435, respectively. The new GRAS preparation OM-RML brings forth an optimal regioselective preparation of sn-1 mono and sn-1,3 diacylglycerols rich in CLA, with a ratio of sn-1,3/sn-1,2 regioisomers of 21.8, compared to 2.3 for Novozym® 435. © 2017 Elsevier Ltd, This work was partially supported by the Program of I+D Activities of the Autonomous Community of Madrid, Spain: Tecnología 2013 (Project INSPIRA1-CM Ref. S2013/ABI-2783 “Aplicaciones industriales de la Espirulina”., and co-financed by the European Structural Found (European Social Found -EFS- and European Found for Regional Development-FEDER-). We recognize the support from the MINECO of Spanish Government, CTQ2013-41507-R and CTQ2017-86170-R. The authors wish to thank Mr. Ramiro Martínez (Novozymes, Spain) for kindly supplying the enzymes used in this research. The help and suggestions made by Dr. Ángel Berenguer (Instituto de Materiales, Universidad de Alicante) and Dr Malcolm Yates (ICP-CSIC) are gratefully recognized., Peer reviewed