Pasar al contenido principal

ELECTRONIC TONGUE FINGERPRINTING: APLICACIONES EN EL CAMPO ALIMENTARIO Y DE SEGURIDAD

CTQ2013-41577-P

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2013
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario UNIVERSIDAD AUTONOMA DE BARCELONA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 18
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Aptamer-antibody sandwich assay for cytochrome c employing a MWCNT platform and the electrochemical impedance technique

  • Ocaña Tejada, Cristina
  • Lukic, Sonja
  • Valle, Manel del|||0000-0002-1032-8611
We report on a sensitive aptamer-antibody interaction-based assay for cytochrome c (Cytc) using electrochemical impedance. 4-Amino benzoic acid is used for the oriented immobilization of aminated aptamers onto multi-walled carbon nanotubes on the surface of a screen-printed electrode via electrochemical grafting. Impedance was measured in a solution containing the redox system ferro/ferricyanide. The change in interfacial charge transfer resistance (Rct) experienced by the redox marker was recorded to confirm the formation of a complex between aptamer and the target (Cytc). A biotinylated antibody against cytochrome c was then used in a sandwich type of assay. The addition of streptavidin conjugated to gold nanoparticles and signal enhancement by treatment with silver led to a further increase in Rct. Under optimized conditions, a detection limit as low as 12 pM was obtained. Cross-reactivity against other serum proteins including fibrinogen, BSA and immunoglobulin G demonstrated improved selectivity.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Resolution of galactose, glucose, xylose and mannose in sugarcane bagasse employing a voltammetric electronic tongue formed by metals oxy-hydroxide/MWCNT modified electrodes

  • Cardoso de Sá, Acelino|||0000-0002-9811-4879
  • González-Calabuig, Andreu|||0000-0002-6325-138X
  • Cipri, Andrea
  • Ramos Stradiotto, Nelson
  • Valle, Manel del|||0000-0002-1032-8611
Second generation ethanol is produced from the carbohydrates released from the cell wall of bagasse and straw of sugarcane. The objective of this work is the characterization and application of a voltammetric electronic tongue using an array of glassy carbon electrodes modified with multi-walled carbon nanotubes containing metal (Paladium, Gold, Copper, Nickel and Cobalt) oxy-hydroxide nanoparticles (GCE/MWCNT/MetalsOOH) towards a simpler analysis of carbohydrates (glucose, xylose, galactose and mannose). The final architecture of the back-propagation Artificial Neural Network (ANN) model had 36 input neurons and a hidden layer with 5 neurons. The ANN based prediction model has provided satisfactory concentrations for all carbohydrates; the obtained response had a maximum NRMSE of 12.4% with a maximum deviation of slopes in the obtained vs. expected comparison graph of 15%. For all species, the comparison correlation coefficient was of r ≥ 0.99 for the training subset and of r ≥ 0.96 for the test subset.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

DNA polymorphism sensitive impedimetric detection on gold-nanoislands modified electrodes

  • Bonanni, Alessandra
  • Pividori, María Isabel|||0000-0002-5266-7873
  • Valle, Manel del|||0000-0002-1032-8611
Nanocomposite materials are being increasingly used in biosensing applications as they can significantly improve biosensor performance. Here we report the use of a novel impedimetric genosensor based on gold nanoparticles graphite-epoxy nanocomposite (nanoAu-GEC) for the detection of triple base mutation deletion in a cystic-fibrosis (CF) related human DNA sequence. The developed platform consists of chemisorbing gold nano-islands surrounded by rigid, non-chemisorbing, and conducting graphite-epoxy composite. The ratio of the gold nanoparticles in the composite was carefully optimized by electrochemical and microscopy studies. Such platform allows the very fast and stable thiol immobilization of DNA probes on the gold islands, thus minimizing the steric and electrostatic repulsion among the DNA probes and improving the detection of DNA polymorphism down to 2.25 fmol by using electrochemical impedance spectroscopy. These findings are very important in order to develop new and renewable platforms to be used in point-of-care devices for the detection of biomolecules.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Crown ether-modified electrodes for the simultaneous stripping voltammetric determination of Cd(II), Pb(II) and Cu(II)

  • Serrano i Plana, Núria
  • González-Calabuig, Andreu|||0000-0002-6325-138X
  • Valle, Manel del|||0000-0002-1032-8611
This work describes the immobilization of 4-carboxybenzo-18-crown-6 (CB-18-crown-6) and 4-carboxybenzo-15-crown-5 (CB-15-crown-5) assisted by lysine on aryl diazonium salt monolayers anchored to the surface of graphite-epoxy composite electrodes (GEC), and their use for the simultaneous determination of Cd(II), Pb(II) and Cu(II) by differential pulse anodic stripping voltammetry (DPASV). These modified electrodes display a good repeatability and reproducibility with detection and quantification limits at levels of µg L-1 (ppb), confirming their suitability for the determination of Cd(II), Pb(II) and Cu(II) ions in environmental samples. The overlapped nature of the multimetal stripping measurements was resolved by employing the two-sensor array CB-15-crown-5-GEC and CB-18-crown-6-GEC, since the metal complex selectivity exhibited by the considered ligands could add some discrimination power. For the processing of the voltammograms, Discrete Wavelet Transform and Causal Index were selected as preprocessing tools for data compression coupled with an artificial neural network for the modeling of the obtained responses, allowing the resolution of mixtures of these metals with good prediction of their concentrations (correlation with expected values for an external test subset better than 0.942).
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Simultaneous voltammetric determination of heavy metals by use of crown ether-modified electrodes and chemometrics

  • González-Calabuig, Andreu|||0000-0002-6325-138X
  • Guerrero, David
  • Serrano i Plana, Núria
  • Valle, Manel del|||0000-0002-1032-8611
A three-sensor array consisting of a graphite-epoxy composite electrode (GEC), 4-carboxybenzo-18-crown-6-GEC and 4- carboxybenzo-15-crown-5-GEC was employed for the simultaneous determination of Cd(II), Pb(II) and Hg(II) by differential pulse anodic stripping voltammetry (DPASV). Sensors were firstly studied for the determination of Hg(II); secondly, peak current responses confirmed that all sensors showed differentiated response for the three considered metals. A response model was developed to resolve mixtures of Cd(II), Pb(II) and Hg(II) at the μg L⁻¹ level; Discrete Wavelet Transform was selected as preprocessing tool and artificial neural network used for the modelling of the obtained responses.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A novel bio-electronic tongue using cellobiose dehydrogenase from different origins to resolve mixtures of various sugars and interfering analytes

  • Cipri, Andrea
  • Schulz, Christopher
  • Ludwig, Roland
  • Gorton, Loo
  • Valle, Manel del|||0000-0002-1032-8611
A novel application of cellobiose dehydrogenase (CDH) as sensing element for a Bioelectronic Tongue (BioET) system has been tested. In this work CDHs from various fungi, which exhibit different substrate specificities, were used to discriminate between lactose and glucose in presence of the interfering matrix compound Ca²⁺ in various mixtures. This work exploits the advantage of an electronic tongue system with practically zero pre-treatment of samples and operation at low voltages in a direct electron transfer mode. The Artificial Neural Network (ANN) used in the BioET system to interpret the voltammetric data was able to provide a correct prediction of the concentrations of the analytes considered. Correlation coefficients in the comparison of obtained vs. expected concentrations were highly significant, especially for lactose (R²=0.975) and Ca²⁺ (R²=0.945). This BioET application has a high potential especially for the food and dairy industry and also, if further miniaturised in screen printed format, for its in-situ use.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Three different signal amplification strategies for the impedimetric sandwich detection of thrombin

  • Ocaña Tejada, Cristina
  • Valle, Manel del|||0000-0002-1032-8611
In this work, we report a comparative study on three highly specific amplification strategies for the ultrasensitive detection of thrombin with the use of aptamer sandwich protocol. The protocol consisted on the use of a first thrombin aptamer immobilized on the electrode surface, the recognition of thrombin protein, and the reaction with a second biotinylated thrombin aptamer forming the sandwich. Through the exposed biotin end, three variants have been tested to amplify the electrochemical impedance signal. The strategies included (a) silver enhancement treatment, (b) gold enhancement treatment and (c) insoluble product produced by the combination of the enzyme horseradish peroxidase (HRP) and 3-amino-9-ethylcarbazole (AEC). The properties of the sensing surface were probed by electrochemical impedance measurements in the presence of the ferrocyanide/ferricyanide redox marker. Insoluble product strategy and silver enhancement treatment resulted in the lowest detection limit (0.3 pM), while gold enhancement method resulted in the highest reproducibility, 8.8% RSD at the pM thrombin concentration levels. Results of silver and gold enhancement treatment also permitted direct inspection by scanning electron microscopy (SEM).
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Label-free aptasensor for lysozyme detection using electrochemical impedance spectroscopy

  • Ortiz, Dionisia|||0000-0002-5637-8120
  • Valle, Manel del|||0000-0002-1032-8611
This research develops a label-free aptamer biosensor (aptasensor) based on graphite-epoxy composite electrodes (GECs) for the detection of lysozyme protein using Electrochemical Impedance Spectroscopy (EIS) technique. The chosen immobilization technique was based on covalent bonding using carbodiimide chemistry; for this purpose, carboxylic moieties were first generated on the graphite by electrochemical grafting. The detection was performed using [Fe(CN)]/[Fe(CN)] as redox probe. After recording the frequency response, values were fitted to its electric model using the principle of equivalent circuits. The aptasensor showed a linear response up to 5 µMfor lysozyme and a limit of detection of 1.67 µM. The sensitivity of the established method was 0.090 µM in relative charge transfer resistance values. The interference response by main proteins, such as bovine serum albumin and cytochrome c, has been also characterized. To finally verify the performance of the developed aptasensor, it was applied to wine analysis.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A voltammetric electronic tongue for the resolution of ternary nitrophenol mixtures

  • González-Calabuig, Andreu|||0000-0002-6325-138X
  • Cetó, Xavier|||0000-0003-1589-6076
  • Valle, Manel del|||0000-0002-1032-8611
This work reports the applicability of a voltammetric sensor array able to quantify the content of 2,4-dinitrophenol, 4-nitrophenol, and picric acid in artificial samples using the electronic tongue (ET) principles. The ET is based on cyclic voltammetry signals, obtained from an array of metal disk electrodes and a graphite epoxy composite electrode, compressed using discrete wavelet transform with chemometric tools such as artificial neural networks (ANNs). ANNs were employed to build the quantitative prediction model. In this manner, a set of standards based on a full factorial design, ranging from 0 to 300 mg·L, was prepared to build the model; afterward, the model was validated with a completely independent set of standards. The model successfully predicted the concentration of the three considered phenols with a normalized root mean square error of 0.030 and 0.076 for the training and test subsets, respectively, and r ≥ 0.948.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Electronic tongue for nitro and peroxide explosive sensing

  • González-Calabuig, Andreu|||0000-0002-6325-138X
  • Cetó, Xavier|||0000-0003-1589-6076
  • Valle, Manel del|||0000-0002-1032-8611
This work reports the application of a voltammetric electronic tongue (ET) towards the simultaneous determination of both nitro-containing and peroxide-based explosive compounds, two families that represent the vast majority of compounds employed either in commercial mixtures or in improvised explosive devices. The multielectrode array was formed by graphite, gold and platinum electrodes, which exhibited marked mix-responses towards the compounds examined; namely, 1,3,5-trinitroperhydro-1,3,5-triazine (RDX), octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX), pentaerythritol tetranitrate (PETN), 2,4,6-trinitrotoluene (TNT), N-methyl-N,2,4,6-tetranitroaniline (Tetryl) and triacetone triperoxide (TATP). Departure information was the set of voltammograms, which were first analyzed by means of principal component analysis (PCA) allowing the discrimination of the different individual compounds, while artificial neural networks (ANNs) were used for the resolution and individual quantification of some of their mixtures (total normalized root mean square error for the external test set of 0.108 and correlation of the obtained vs. expected concentrations comparison graphs r.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Analysis of amino acid mixtures by voltammetric electronic tongues and artificial neural networks

  • Faura, Georgina
  • González-Calabuig, Andreu|||0000-0002-6325-138X
  • Valle, Manel del|||0000-0002-1032-8611
A new voltammetric electronic tongue formed with graphite-epoxy composite electrodes which were modified with metal-oxide nanoparticles is presented for the quantification of tryptophan, tyrosine and cysteine aminoacid mixtures. The signals were obtained by cyclic voltammetry, and data was processed using two different chemometric techniques, artificial neural networks and partial least squares regression, for comparison purposes. Before performing artificial neural networks data was compressed by fast Fourier transform or discrete wavelet transform. The best results were attained using artificial neural networks with previous fast Fourier transform compression of the data with a normalized root-mean-square error of 0.032 (n=15) for the external test subset. The present method shows results comparable to other similar approaches, but with a much easier sampling process for the training set and new electrode modifiers to form the voltammetric sensors.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Bioelectronic tongue using MIP sensors for the resolution of volatile phenolic compounds

  • Herrera-Chacon, Anna|||0000-0002-6169-147X
  • González-Calabuig, Andreu|||0000-0002-6325-138X
  • Campos, Inmaculada
  • Valle, Manel del|||0000-0002-1032-8611
The proposed approach reports the combined advantages of biosensors made of molecularly imprinted polymers (MIPs) and the modelling capabilities of Artificial Neural Networks (ANN) in a bio-electronic tongue (BioET) analysis system for the very first time. Molecularly imprinted polymers taylor-made for 4-ethylphenol (4-EP) and 4-ethylguaiacol (4-EG) and their control polymers, non-imprinted polymers (NIPs), were succesfully synthesized with similar morphologies and integrated onto an electrochemical sensor surface, as the recognition element, via sol-gel immobilization. The resulting MIP-functionalized electrodes were employed to arrange an array of different biosensor electrodes to quantify by means of ANN the binary mixtures of 4-EP and 4-EG yielding an obtained vs. expected correlation coefficient.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Multivariate determination of total sugar content and ethanol in bioethanol production using carbon electrodes modified with MWCNT/MeOOH and chemometric data treatment

  • Cardoso de Sá, Acelino|||0000-0002-9811-4879
  • Cipri, Andrea
  • González-Calabuig, Andreu|||0000-0002-6325-138X
  • Stradiotto, Nelson Ramos
  • Valle, Manel del|||0000-0002-1032-8611
This work reports the characterization and application of a voltammetric electronic tongue using an array of glassy carbon electrodes modified with multi-walled carbon nanotubes containing metal (Pd, Au, Cu) and oxy-hydroxide nanoparticles (MetalsOOH of Ni, Co) towards the determination of total sugar content in products related with sugarcane-bioethanol production. The prediction model based on Artificial Neural Networks (ANN) has given satisfactory results for the carbohydrate sum and the obtained response had shown an adequate accuracy. Voltammetric data was first adapted for the computation using the Fast Fourier transform, and results from the electronic tongue approach were compared with use of different electrodes alone. Final performance was better using uniquely the Ni oxy-hydroxide modified electrode, especially in the quantification of ethanol, a side-effect of counter-balancing its interference.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Graphene electrode platform for impedimetric aptasensing

  • Aceta, Yara|||0000-0002-6843-2200
  • Valle, Manel del|||0000-0002-1032-8611
In this study, we synthesized graphene oxide (GO) at different oxidation times (30, 60 and 120 min) using a modified Hummer's method and investigated their carbon-to-oxygen (C/O) ratios, the % C-C double bond, the diffraction pattern, their topography and their electrochemical behaviour both by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). All GOs synthesized were compared with a GO from commercial source. Graphite-epoxy composite (GEC) electrodes fabricated in our laboratory were modified with GO and electrochemically reduced graphene oxide (ERGO) in preliminary assays to elucidate its applicability for enhanced DNA aptamer biosensing applications.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Computational design of molecularly imprinted polymer for direct detection of melamine in milk

  • Bates, Ferdia
  • Busato, Mirko
  • Piletska, Elena
  • Whitcombe, Michael J.
  • Karim, Kal
  • Guerreiro, Antonio
  • Valle, Manel del|||0000-0002-1032-8611
  • Giorgetti, Alejandro
  • Piletsky, Sergey
A novel protocol for use of molecularly imprinted polymer (MIP) in analysis of melamine is presented. Design of polymer for melamine has been achieved using a combination of computational techniques and laboratory trials, the former greatly reducing the duration of the latter. The compatibility and concerted effect of monomers and solvents were also investigated and discussed. Two novel open-source tools were presented which are the online polymer calculator from mipdatabase.com and the application of the Gromacs modelling suite to determine the ideal stoichiometric ratio between template and functional monomer. The MIP binding was characterised for several structural analogues at 1-100 μM concentrations. The use of divinylbenzene (DVB) as cross-linking polymer and itaconic acid as functional monomer allowed synthesis of MIP with imprint factor (IF) of 2.25 for melamine. This polymer was used in high-performance liquid chromatography (HPLC) for the rapid detection of melamine in spiked milk samples with an experimental run taking 7-8 min. This approach demonstrated the power of virtual tools in accelerated design of MIPs for practical applications.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Electronic tongues to assess wine sensory descriptors

  • Cetó, Xavier|||0000-0003-1589-6076
  • González-Calabuig, Andreu|||0000-0002-6325-138X
  • Crespo, Nora
  • Pérez Rafael, Sandra|||0000-0002-6411-0861
  • Capdevila Mestres, Josefa
  • Puig-Pujol, Anna
  • Valle, Manel del|||0000-0002-1032-8611
This work reports the application of an electronic tongue as a tool towards the analysis of wine in tasks such as its discrimination based on the maturing in barrels or the prediction of the global scores assigned by a sensory panel. To this aim, red wine samples were first analysed with the voltammetric sensor array, without performing any sample pretreatment. Afterwards, obtained responses were preprocessed employing fast Fourier transform (FFT) for the compression and reduction of signal complexity, and obtained coefficients were then used as inputs to build the qualitative and quantitative models employing either linear discriminant analysis (LDA) or partial least squares regression (PLS), respectively. Satisfactory results were obtained overall, with a classification rate of 100% in the discrimination of the type of barrel used during wine maturing, a normalized NRMSE of 0.077 in the estimation of ageing time (months) or 0.11 in the prediction of the scores (0-10) from a trained sensory panel (all for the external test subset).
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Enhanced electrochemical response of carbon quantum dot modified electrodes

  • Algarra, Manuel|||0000-0003-2410-8430
  • González-Calabuig, Andreu|||0000-0002-6325-138X
  • Radotić, Ksenija
  • Mutavdzic, D.
  • Ania, Conchi|||0000-0001-9517-8132
  • Lázaro-Martínez, Juan Manuel M.|||0000-0002-7189-6874
  • Jiménez-Jiménez, José|||0000-0002-9727-0570
  • Rodríguez-Castellón, Enrique|||0000-0003-4751-1767
  • Valle, Manel del|||0000-0002-1032-8611
A glassy carbon electrode (GCE) was surface-modified with carbon quantum dots (CQDs) and applied for the effective enhancement of the electrochemical signal for dopamine and uric acid determination. CQDs were prepared from graphite by a green modification of the Hummers method. They were characterized by FTIR-ATR, XPS, solid-state NMR, fluorescence and Raman spectroscopies. TPD-MS analysis was applied to characterize the functionalization of the surface. The CQDs were assembled on the glassy carbon electrode by adsorption because of the large number of carboxy groups on their surface warrants effective adsorption. The modified GCE exhibits a sensitivity that is almost 10 times better than of the bare GCE. The lower limits of detection are 1.3 μM for uric acid and 2.7 μM for dopamine.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Voltammetric electronic tongue to identify Brett character in wines. On-site quantification of its ethylphenol metabolites

  • González-Calabuig, Andreu|||0000-0002-6325-138X
  • Valle, Manel del|||0000-0002-1032-8611
This work reports the applicability of a voltammetric sensor array able to evaluate the content of the metabolites of the Brett defect: 4-ethylphenol, 4-ethylguaiacol and 4-ethylcatechol in spiked wine samples using the electronic tongue (ET) principles. The ET used cyclic voltammetry signals, obtained from an array of six graphite epoxy modified composite electrodes; these were compressed using Discrete Wavelet transform while chemometric tools, among these artificial neural networks (ANNs), were employed to build the quantitative prediction model. In this manner, a set of standards based on a modified full factorial design and ranging from 0 to 25 mg L-1 on each phenol, was prepared to build the model; afterwards, the model was validated with an external test set. The model successfully predicted the concentration of the three considered phenols with a normalized root mean square error of 0.02 and 0.05, for the training and test subsets respectively, and correlation coefficients better than 0.958.