Pasar al contenido principal

DISEÑO Y APLICACIONES DE NUEVOS MICRO/NANOGELES BIOCOMPATIBLES OBTENIDOS MEDIANTE METODOS DE CONDENSACION AVANZADOS

CTQ2014-52687-C3-1-P

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2014
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Gelatin/Maltodextrin Water-in-Water (W/W) Emulsions for the Preparation of Cross-Linked Enzyme-Loaded Microgels

  • Beldengrün, Yoran
  • Aragón, Jordi
  • Prazeres, Sofia F.
  • Montalvo, Gemma
  • Miras Hernández, Jonathan
  • Esquena, Jordi
Cross-linked gelatin microgels were formed in gelatin-in-maltodextrin water-in-water (W/W) emulsions and evaluated as carriers of the enzyme β-galactosidase (β-Gal). The phase behavior of aqueous gelatin/maltodextrin mixtures was studied in detail, focusing on the multiphase region of the phase diagram that is constituted by three equilibrium phases: two immiscible aqueous phases plus one solid phase. The solid phase was analyzed by Raman spectroscopy, and water-in-water emulsions were formed within the multiphase region. Gelation of the dispersed gelatin droplets was induced by cooling and cross-linking with genipin, which is a natural cross-linking reagent of low toxicity, leading to the formation of gelatin microgel particles. These microgels were studied as delivery vehicles for the enzyme lactase, used as a model active component. Various incorporation methods of the enzyme were tested, to achieve highest encapsulation yield and activity recovery. Microgel particles, loaded with the enzyme, can be freeze-dried, and the enzyme remained active after a complete cycle of freeze-drying and rehydration. The stability of the enzyme at 37 °C under gastric and neutral pH conditions was tested and led to the conclusion that the cross-linked microgels could be suitable for use in food-industry, where β-Gal carriers are of interest for hydrolyzing lactose in milk products. Copyright © 2018 American Chemical Society., The authors greatly acknowledge financial support from the Spanish Ministry of Economy and Competitiveness (CTQ2014-52687-C3-1-P project) and Marie Sklodowska Curie Initial Training Networks (FP7-PEOPLE-2013-ITN-606713, BIBAFOODS project). Support from Generalitat de Catalunya (2014SGR1655 and TECCIT15-1-0009) and Centro de Investigacioń Biomed́ ica en Red de Bioingenierıá, Biomateriales y Nanomedicina (CIBER-BBN), is also acknowledged. Phase behavior, microscopy observations, and particle size determinations have been performed by the Nano-structured Liquid Characterization Unit, located at the Institute of Advanced Chemistry of Catalonia (IQAC), belonging to the Spanish National Research Council (CSIC) and affiliated to the NANBIOSIS ICTS of the Biomedical Networking Center (CIBER-BBN). The authors also greatly thank Allan Mackie and Josep Bonet (Universitat Rovira i Virgili, Spain) and Carlos Rodriguez-Abreú (IQAC-CSIC) for useful discussions., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Current Opinion in Colloid and Interface Science

  • Esquena, Jordi
Water-in-water (W/W) emulsions are colloidal dispersions of an aqueous solution into another aqueous phase. Such dispersions can be formed in mixtures of at least two hydrophilic macromolecules, which are thermodynamically incompatible in solution, generating two immiscible aqueous phases. W/W emulsions are much less known than conventional oil-in-water or water-in-oil emulsions, despite the fact that phase separation in aqueous mixtures is highly common. The thermodynamics and the phase behavior of segregative phase separation in mixtures of hydrophilic polymers have focused a great attention, with many excellent scientific reports in the literature. However, the kinetic stability of water-in-water emulsions is generally difficult to control, since amphiphilic molecules do not adsorb on water-water interfaces. Consequently, surfactants are not good stabilizers for W/W emulsions, and until recently, only a limited number of scientific studies have dealt with the formation and stabilization of emulsions in aqueous two-phase systems. Recent advances and successful results in the stabilization of these emulsions, by alternative mechanisms, have triggered a renewed interest. Nowadays, fast progress is being made in formation and stabilization methods, and new knowledge is rapidly acquired, opening a wide range of novel possibilities for practical applications. Interestingly, highly stable water-in-water emulsions can be formulated using fully biocompatible and edible components, and consequently, these emulsions can be used in food formulations, among many other interesting applications. This review describes the general background of research in the field, and focuses on recent scientific advances, including phase behavior, formation, stability and kinetic aspects, as well as applications such as formation of microgels, encapsulation and drug delivery. © 2016 Elsevier Ltd, The author greatly acknowledges the financial support from the Spanish Ministry of Economy and Competitiveness (CTQ2014-52687-C3-1-P project) and Marie Sklodowska Curie Initial Training Networks (FP7-PEOPLE-2013-ITN, BIBAFOODS project). The author also acknowledges support from Generalitat de Catalunya (2014SGR1655 and TECCIT15-1-0009) and Centro de Investigación Biomédica en Red de Bioingeniería, Biomateriales y Nanomedicina (CIBER-BBN)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Simple Method for Rheological Determination of Surfactant Layer Thickness, Adsorbed on Soft Rubber Particles

  • Singh, Manroshan
  • Tadros, Tharwat F.
  • Solans, Conxita
  • Booten, Karl
  • Levecke, Bart
  • Esquena, Jordi
Natural rubber latex is a colloidal suspension of particles, which is very important for many industrial applications. These latex particles are not only polydispersed but also very soft and deformable, which makes the prediction of rheological properties much difficult. Herein, the rheology of natural rubber latex has been studied at high particle concentrations, analyzing the effects of surfactant addition on colloidal stability. A hydrophobically modified inulin surfactant (INUTEC NRA) was selected for this study, since previous works had shown that this inulin surfactant imparts good colloidal stability to polystyrene latex particles. The most important objective was studying the influence of the surfactant on the particle adsorbed layer and determining the thickness of the adsorbed surfactant layer. The results showed that relative viscosity increased as a function of latex volume fraction and this increase became extremely sharp as the volume fraction approached the maximum packing volume fraction, as expected. This variation in viscosity with volume fraction has a complex behavior, which could not be analysed using conventional models based on hard-rigid spheres, such as Krieger-Dougherty (K-D) or Maron-Pierce (M-P). Herein, we describe a simple semiempirical method to determine the surfactant adsorbed layer thickness, based on the linear dependence of intrinsic viscosity with 1/(max-2, where  is the volume fraction of rubber particles and max is the maximum volume fraction at which viscosity tends to infinity. The difference in maximum packing fraction, with and without surfactant, allows the calculation of the adsorbed layer thickness,  ≈2.8 nm, which is a good estimate for the thickness of surfactant molecules adsorbed on latex particles. This surfactant thickness has been confirmed by direct measurements using Dynamic Light Scattering (DLS), which gave a value of 3.1 nm. Viscoelastic oscillatory measurements have also been performed, showing that natural rubber particle suspensions are predominantly elastic above =0.63 latex volume fractions. The elastic modulus has been analyzed as a function of surfactant concentration, confirming that stability of latex particles is mainly controlled by surfactant concentration., First, the authors greatly thank the Malaysian Rubber Board, Beneo (Belgium) and CreaChem (Belgium) for providing the financial support required in this joint research project. The authors also acknowledge the financial support from the Spanish Ministry of Science, Innovation and Universities (CTQ2014-52687-C3-1-P and CTQ2017-84998-P projects). Support from Generalitat de Catalunya (2014SGR1655 and 2017SGR1778 consolidated group awards; and TECCIT15-1-0009 and TECCIT16-1-0049 TECNIO awards) is also acknowledged. Characterization of latexes and rheological determinations was performed at the Nanostructured Liquid Characterization Unit, located at the Institute of Advanced Chemistry of Catalonia (IQAC) of the Spanish National Research Council (CSIC). This characterization unit is affiliated to the NANBIOSIS ICTS, ascribed to Centro de Investigación Biomédica en Red de Bioingeniería, Biomateriales y Nanomedicina, CIBER-BBN, which is financed by Instituto de Salud Carlos III. The authors also acknowledge the Grupo de Nanotecnología Farmacéutica, of the University of Barcelona (UB), in the Faculty of Pharmacy, which forms an Associated Unit to CSIC. Authors are also very grateful to the European Regional Development Fund (Fondo Europeo de Desarrollo Regional, FEDER), which provides financial support to government programs., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Cell penetrating peptide grafting of PLGA nanoparticles to enhance cell uptake

  • Feiner-Gracia, Natalia
  • Dols-Pérez, Aurora
  • Royo, Miriam
  • Solans, Conxita
  • García-Celma, M. J.
  • Fornaguera, Cristina
Polymeric nanoparticles emerged a few decades ago and since then, their use and research has experienced an exponential increase, especially in the biomedical field. Among the methods to prepare polymeric nanoparticles, nano-emulsion templating is advantageous in terms of versatility, robustness, safety and efficiency. The current study represents a proof of concept of the versatility and robustness of this method for the formation of dell penetrating peptide (CPP) – functionalized PLGA nanoparticles able to efficiently cross plasma membrane and release their cargo inside the cell, where most active principles must perform their therapeutic activity. First, PLGA nano-emulsions were prepared by the phase inversion composition method, in mild conditions, required for labile pharmaceutical actives and without the need of purification steps, thus being appropriate for pharmaceutical purposes. Once nanoparticles are formed, they are functionalized, a posteriori, with a model CPP; procedure advantageous to preserve CPP functionality. It is worth noting that these nanoparticles showed smaller sizes than most PLGA nanoparticles reported previously elsewhere, property advantageous in terms of in vivo use. CPP covalent post-attachment promoted efficient nanoparticle uptake allowing them to efficiently cross plasmatic cell membranes, a bottleneck step for many nanosystems. Crossing plasmatic cell membrane was overcome with our CPP-functionalized nanoparticles, as confirmed by confocal microscopy studies. Thus, nanoparticles prepared by nano-emulsion templating can be considered a promising alternative to design novel efficient nanotherapies for multiple therapeutic purposes., Financial support from Spanish Ministry of Economy and Competitivity, MINECO (grant CTQ2014-52687, CTQ2016-80645-R and SAF-2014-60138-R) and Generaltitat de Catalunya (grant 2014-SGR-1655, 2014-SGR-137, and 2017-SGR-1439) is acknowledged. CIBER-BBN is an initiative funded by the VI National R&D&I Plan 2008–2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund. C. Fornaguera is grateful to AGAUR for their Predoctoral Fellowship (grant FI-DGR 2012) and to MINECO for their Postdoctoral Fellowship (grant PTQ2015) and N. Feiner-Gracia is grateful to CIBER-BBN for their starting grant., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Characterization of Polymeric Nanoparticle Dispersions for Biomedical Applications: Size, Surface Charge and Stability

  • Fornaguera, Cristina
  • Solans, Conxita
In the last decades, nanoparticles intended for biomedical applications have gained increased attention due to the advantages they represent among the current diagnostic and therapeutic methods. However, the translation of nanomaterials laboratory results to human therapies is limited, mainly due to incomplete characterization of nanosystem properties, before preclinical studies. In this context, this review aims to summarize the main physicochemical characterization techniques of nanoparticles in a liquid dispersion, required in their design steps; which is of utmost importance for successful applications. One of the key physicochemical parameters of nanomaterials is size. To assess nanoparticles' size, a wide revision of light scattering and microscopic techniques is reported here, some of them being also useful for determining nanomaterial morphology. The determination of nanosystem surface charge is also reported, because it is also a key parameter that will influence their interaction with biological components. In addition, the determination of nanomaterials' stability, which is important in terms of storage and use, is described. In conclusion, this review will be a useful support to find the appropriate techniques for an appropriate nanoparticle physicochemical preclinical characterization., Financial support from Spanish Ministry of Economy and Competitivity, MINECO (grant CTQ2014-52687) and Generaltitat de Catalunya (grant 2014-SGR-1655) is acknowledged. CIBER-BBN is an initiative funded by the VI National R&D&I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund. CFP is acknowledged to Generalitat de Catalunya, for their FI-2012 Agaur predoctoral grant and to MINECO, for their Torres Quevedo postdoctoral grant., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chromonic self-assemblies in a series of dialkyl-thiacarbocyanine dyes and generalization of a facile route for the synthesis of fluorescent nanostructured silica fibers

  • Magaña, José Rodrigo
  • Solans, Conxita
  • Salonen, Laura M.
  • Carbó-Argibay, Enrique
  • Gallo, Juan
  • Tiddy, Gordon J.T.
  • Rodríguez-Abreu, Carlos
In the search for new chromonic liquid crystals, we have explored the self-assembly behavior in water of a series of high-purity dialkylthiacarbocyanine dyes with different alkyl chain lengths and acetate as counterion. The dimer model was used to fit the UV–vis spectra and estimate the dissociation energy between molecules, which increases with the alkyl chain length suggesting that not only aromatic π–π interactions but also entropic/steric effects contribute to the aggregation process. NMR spectra suggest the existence of aromatic stacking interactions within the aggregates. At high concentrations, the dyes form nematic and hexagonal chromonic liquid crystals (CLC) in water within a limited range of alkyl chain lengths (ethyl to butyl); for longer lengths (pentyl) no liquid crystals were observed because of insufficient dye solubility. From small angle X-ray scattering patterns, it can be inferred that dye aggregates have cylindrical morphology with a multimolecular cross-section. The dye aggregates template the formation of silica nanofibers synthetized via sol–gel method in alkaline media. After removing excess dye, the silica/dye nanofibers showed high fluorescence emission with superb photochemical stability. The present report demonstrates a generalized route for the wet synthesis of nanostructured silica nanofibers with tunable optical properties., J.R.M. acknowledges funding from the Ministerio de Economia y Competitividad, Spain (grant EEBB-I-15-10167 and project CTQ2011-29336-C03-01). The authors also acknowledge the project CTQ2014-52687 and the Generaltitat de Catalunya (grant 2014-SGR-1655). CIBER-BBN is an initiative funded by the VI National R&D&I Plan 2008–2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Design of parenteral MNP-loaded PLGA nanoparticles by a low-energy emulsification approach as theragnostic platforms for intravenous or intratumoral administration

  • Calderó, Gabriela
  • Fornaguera, Cristina
  • Zadoina, L.
  • Dols-Pérez, Aurora
  • Solans, Conxita
Encapsulation of magnetic nanoparticles (MNP) into PLGA nanoparticles has been achieved by nano-emulsion templating using for the first time both, a low-energy emulsification method as well as biocompatible components accepted for pharmaceuticals intended for human use. The incorporation of MNP by nano-emulsion templating method proposed in this work has been investigated in two different systems applying mild process conditions and is shown to be simple and versatile, providing stable MNP-loaded PLGA nanoparticles with tunable size and MNP concentration. MNP-loaded PLGA nanoparticles showed sizes below 200nm by DLS and 50nm by TEM, and mean MNP loading per PLGA nanoparticle of 1 to 4, depending on the nanoparticle dispersion composition. Physical-chemical features suggest that the MNP-loaded PLGA nanoparticles obtained are good candidates for intravenous or intratumoral administration., Financial support from MINECO (grant CTQ2014-52687-C3-1-P); Generalitat de Catalunya (grant 2014-SGR-1655), and CIBER-BBN are acknowledged. CIBER-BBN is an initiative funded by the VI National R&D&I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund. Cristina Fornaguera is grateful to AGAUR for their Predoctoral Fellowship (grant FI-DGR 2012)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hyaluronan based materials with catanionic sugar-derived surfactants as drug delivery systems

  • Roig-Roig, Ferrán
  • Blanzat, M.
  • Solans, Conxita
  • Esquena, Jordi
  • García-Celma, M. J.
In the present work novel drug delivery systems consisting in highly porous Hyaluronan foams for the administration of a non-steroidal anti-inflammatory drug (NSAID), ketoprofen, have been obtained. A sugar-derived surfactant associated with ketoprofen was prepared and incorporated into the porous hyaluronan materials. The association between a lactose derived surfactant, Lhyd12, and ketoprofen was obtained by acid-base reaction and its physicochemical properties were studied. Tensiometric and dynamic light scattering (DLS) determinations showed the formation of catanionic surfactant aggregates, Lhyd12/ketoprofen, in aqueous solution. Furthermore, the catanionic surfactants allowed greater solubilisation of ketoprofen. Hyaluronan porous materials were developed using butanediol diglycidyl ether as crosslinking agent. The profile release of Lhyd12/ketoprofen from hyaluronan based materials shows differences as a function of the aggregation state of catanionic surfactant., The authors wish to acknowledge the sponsorship of the Spanish Ministry of Economy and Competitivity (CTQ2016-80645-R and CTQ2014-52687-C-1-P) and Generalitat de Catalunya (Grant 2014SGR1655)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of polymer concentration on the properties of nano-emulsions and nanoparticles obtained by a low-energy method

  • Homs, Maria
  • Calderó, Gabriela
  • Monge, Marta
  • Morales, Daniel
  • Solans, Conxita
This study concerns the effect of polymer content on the properties of nano-emulsions formulated by the PIC low-energy method and on the nanoparticles prepared from nano-emulsions by solvent evaporation. The region of nano-emulsion formation, droplet size and stability as a function of polymer content were investigated. Nano-emulsions were formed in a wide range of oil-to-surfactant weight ratios (Ros) and water contents higher than 45%. For nanoparticles, droplet size, stability, encapsulation efficiency, pH, drug release and cytotoxicity effect were evaluated as a function of polymer content. Nano-emulsion droplet size (Rh = 8–75 nm) and nanoparticle size (Rh = 8–55 nm) increase with the polymer content. No desestabilization process such as creaming or sedimentation was observed by light transmittance/backscattering neither in nano-emulsions nor in nanoparticle dispersions. The morphology and size of nano-emulsions and nanoparticles were comfirmed by Cryo-TEM and TEM techniques, respectively. The pH of nanoparticle dispersions was in the range of 5–6.5 during the studied experimental time (7days), an indication of no polymer degradation. Moreover, Dexamethasone (DXM) encapsulated in the polymeric nanoparticles (0.18 wt% DXM in the oil phase of the template nano-emulsion) did not modify the nanoparticle size. No effect of polymer concentration was found in the encapsulation efficiency (close to 90%) of DXM. In vitro drug release studies indicated Fick's diffusion as the main drug release mechanism from the nanoparticle to the receptor solution. DXM loaded and non-loaded nanoparticles showed cell viability higher than 70%. This study reports a promising system to be used as template for polymeric nanoparticle preparation suitable for biomedical applications., Financial support from Spanish Ministry of Economics and Competitivity, MINECO (grants CTQ 2014-52687-C3-1-P and CTQ 2016-80645-R) and Generalitat de Catalunya (grant 2014SGR-1655) is acknowledged. CIBER-BBN is an initiative funded by the VI National R&D&I Plan 2008–2011., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

PLGA nanoparticles from nano-emulsion templating as imaging agents: Versatile technology to obtain nanoparticles loaded with fluorescent dyes

  • Fornaguera, Cristina
  • Feiner-Gracia, Natalia
  • Calderó, Gabriela
  • García-Celma, M. J.
  • Solans, Conxita
The interest in polymeric nanoparticles as imaging systems for biomedical applications has increased notably in the last decades. In this work, PLGA nanoparticles, prepared from nano-emulsion templating, have been used to prepare novel fluorescent imaging agents. Two model fluorescent dyes were chosen and dissolved in the oil phase of the nano-emulsions together with PLGA. Nano-emulsions were prepared by the phase inversion composition (PIC) low-energy method. Fluorescent dye-loaded nanoparticles were obtained by solvent evaporation of nano-emulsion templates. PLGA nanoparticles loaded with the fluorescent dyes showed hydrodynamic radii lower than 40nm; markedly lower than those reported in previous studies. The small nanoparticle size was attributed to the nano-emulsification strategy used. PLGA nanoparticles showed negative surface charge and enough stability to be used for biomedical imaging purposes. Encapsulation efficiencies were higher than 99%, which was also attributed to the nano-emulsification approach as well as to the low solubility of the dyes in the aqueous component. Release kinetics of both fluorescent dyes from the nanoparticle dispersions was pH-independent and sustained. These results indicate that the dyes could remain encapsulated enough time to reach any organ and that the decrease of the pH produced during cell internalization by the endocytic route would not affect their release. Therefore, it can be assumed that these nanoparticles are appropriate as systemic imaging agents. In addition, in vitro toxicity tests showed that nanoparticles are non-cytotoxic. Consequently, it can be concluded that the preparation of PLGA nanoparticles from nano-emulsion templating represents a very versatile technology that enables obtaining biocompatible, biodegradable and safe imaging agents suitable for biomedical purposes., Financial support from MINECO (grant CTQ2014-52687); Generalitat de Catalunya (grant 2014-SGR-1655), and CIBER-BBN are acknowledged. CIBER-BBN is an initiative funded by the Spanish National Plan for Scientific and Technical Research and Innovation 2013–2016, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions are financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund. Cristina Fornaguera is grateful to AGAUR for their Predoctoral Fellowship (grant FI-DGR 2012). Natalia Feiner is grateful to CIBER-BBN for their Research Initiation Grant., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spontaneous emulsification

  • Solans, Conxita
  • Morales, Daniel
  • Homs, Maria
Spontaneous emulsification may occur when immiscible liquids in non-equilibrium conditions are in contact. This phenomenon is triggered by gradients of chemical potential between the phases, which under certain conditions lead to negative values of free energy of emulsification. A summary of background information on spontaneous emulsification is first presented with emphasis on proposed mechanisms. It follows a description of recent developments, in both surfactant-free and surfactant systems. Applications based on the use of spontaneous emulsification to produce delivery systems and nanostructured materials with improved properties in a cost-effective way are also described., Financial support from the Spanish Ministry of Economy and Competitiveness, MINECO (grant CTQ 2011-29336-CO3-01 and CTQ2014-52687), the Generalitat de Catalunya (grant 2014SGR-1655), and the CIBER-BBN is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Versatile Methodology to Encapsulate Gold Nanoparticles in PLGA Nanoparticles Obtained by Nano-Emulsion Templating

  • Fornaguera, Cristina
  • Feiner-Gracia, Natalia
  • Dols-Pérez, Aurora
  • García-Celma, M. J.
  • Solans, Conxita
[Purpose] Gold nanoparticles have been proved useful for many biomedical applications, specifically, for their use as advanced imaging systems. However, they usually present problems related with stability and toxicity., [Methods] In the present work, gold-nanoparticles have been encapsulated in polymeric nanoparticles using a novel methodology based on nano-emulsion templating. Firstly, gold nanoparticles have been transferred from water to ethyl acetate, a solvent classified as class III by the NIH guidelines (low toxic potential). Next, the formation of nano-emulsions loaded with gold nanoparticles has been performed using a low-energy, the phase inversion composition (PIC) emulsification method, followed by solvent evaporation giving rise to polymeric nanoparticles., [Results] Using this methodology, high concentrations of gold nanoparticles (>100 pM) have been encapsulated. Increasing gold nanoparticle concentration, nano-emulsion and nanoparticle sizes increase, resulting in a decrease on the stability. It is noteworthy that the designed nanoparticles did not produce cytotoxicity neither hemolysis at the required concentration., [Conclusions] Therefore, it can be concluded that a novel and very versatile methodology has been developed for the production of polymeric nanoparticles loaded with gold nanoparticles., inancial support from MINECO (grants CTQ2014-52687-C3-1-P and CTQ2016-80645-R); Generalitat de Catalunya (grant 2014-SGR-1655), and CIBER-BBN are acknowledged. CIBER-BBN is an initiative funded by the VI National R&D&I Plan 2008–2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund. Cristina Fornaguera is grateful to AGAUR for their Predoctoral Fellowship (grant FI-DGR 2012)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Ultrasound-induced microbubble formation in perfluorohexane nanoemulsions for blood brain barrier opening

  • Calderó, Gabriela
  • Rodríguez-Abreu, Carlos
  • González, A.
  • Monge, Marta
  • García-Celma, M. J.
  • Solans, Conxita
Trabajo presentado en la XII Spanish-Portuguese Conference on Controlled Drug Delivery "Tailoring drug delivery system to the patients' needs", celebrada en Coimbra (Portugal), entre el 14 y el 16 de enero de 2018., [Introduction] Recently, it has been shown that microbubbles (MB) can be used to open the blood-brain barrier (BBB) in a noninvasive, reversible and local manner when stimulated by focused ultrasound (FUS) [1]. In this context, perfluorohexane (PFH) nano-emulsions may constitute an advantageous approach. PFH is liquid at body temperature and shows interesting properties such as echogenicity, high oxygen carrying ability and extremely low solubility in aqueous media, including blood [2,3]. The formulation of PFH in O/W nano-emulsions allows intravenous administration and facilitates PFH droplets reaching fine brain capillaries, where they may undergo a phase transition to microbubble formation upon in situ activation with focused ultrasounds (FUS), thus contributing to loosening the tight junctions of brain capillaries endothelial cells. In this study, the incorporation of PFH into polymeric nano-emulsions prepared by a low-energy method has been investigated, as well as its use for the preparation of PFH-loaded nanocapsules as microbubble precursors., [Materials and Methods] MATERIALS: Perfluorohexane (PFH); PLGA (MW ≈ 10.000 g/mol), ethyl acetate, nonionic surfactant (HLB = 15), Apolar Low Density Oil (ALDO), phosphate buffered saline (pH=7.4; 0.16M and 0.33 M). METHODS: Nano-emulsions were prepared by the phase inversion composition (PIC) method. Nanocapsules were obtained from the nano-emulsions by dialysis against PBS. Nano-emulsions and nanocapsules were characterized by Dynamic Light Scattering (DLS), Enhanced Dark Field Microscopy (EDFM), and Transmission Electron Microscopy (TEM). Nano-emulsion stability was assessed by light transmission and backscattering (Turbiscan Lab Expert) at 25ºC. PFH in the nanocapsules was determined by elemental fluor microanalysis and hyperspectral mapper classification of hyperspectral images of NC. Biocompatiblity of the nanocapsules was assessed by means of MTT assay., [Results and Discussion] PFH nano-emulsions were obtained at high oil-to-surfactant ratios with hydrodynamic droplet sizes typically below 300 nm. The incorporation of the PFH in the oil component of the polymeric nano-emulsion dramatically decreases its stability against sedimentation, but this can be improved by the addition of apolar low-density oil. The PFH nanoemulsions were used as templates for the preparation of PFH-loaded polymeric nanocapsules (NC) using a dialysis method. The as-obtained NC show globular shape and sizes below 250 nm by DLS, smaller than the corresponding template nano-emulsion. Successful PFH encapsulation in the NC has been evidenced by VNIR spectral angle mapper classification of hyperspectral images of single NC as well as F elemental microanalysis. Cytotoxicity tests suggest that loading of PFH in the NC does not produce a cytotoxic effect, while ALDO has a negative impact on cell viability. Further, preliminary assays suggest that the as-prepared PFH-loaded NC are promising MB precursors for FUS-assisted BBB opening., [Conclusions] PFH was successfully incorporated in polymeric nano-emulsions (NE) prepared by a PIC method. PFH-loaded NC have been obtained from NE by dialysis. The addition of an apolar low density oil into the oil component of the nanoemulsion improves the stability of the PFH nano-emulsion but has a negative impact on the biocompatibility of the NC. The as prepared PFH-loaded NC are promising MB precursors for FUS-assisted BBB opening., CIBER-BBN is an initiative funded by the VI National R&D&I Plan 2008-2011. Financial support from Spanish Ministry of Economics and Competitivity, MINECO (grants CTQ2014-52687-C3-1-P and CTQ 2016-80645-R) and Generalitat de Catalunya (grant 2014SGR-1655) is acknowledged., Peer reviewed