Pasar al contenido principal

SEGREGACION MOLECULAR A MULTIPLES ESCALAS EN SISTEMAS NO TENSIOCTIVOS PARA LA OBTENCION DE MATERIALES AVANZADOS

CTQ2017-84998-P

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 15
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Formulating stable hexosome dispersions with a technical grade diglycerol-based surfactant

  • Magaña, José Rodrigo
  • Homs, Maria
  • Esquena, Jordi
  • Freilich, Inbar
  • Kesselman, Ellina
  • Kesselman, Ellina
  • Rodríguez-Abreu, Carlos
  • Solans, Conxita
We report on the phase behavior of a technical grade and commercially available diglycerol monoisostearate, C41V, and its use for the preparation of nanostructured liquid crystal dispersions (hexosomes). C41V in water forms a reverse hexagonal liquid crystal at room temperature and in a wide range of concentrations (0.5–95 wt%); this hexagonal liquid crystal is stable up to 70 °C. A simple and effective method has been developed to disperse hexosomes with an encapsulated active molecule (Ketoprofen) that consists of (1) producing a nano-emulsion stabilized by an amphiphilic block copolymer (Pluronic F127) and containing ethyl acetate and C41V by using ultrasounds and (2) evaporating the solvent to produce hexosomes. The size of the hexosomes and ultrasound dispersion time is markedly reduced by using ethyl acetate as an auxiliary solvent with an optimal initial ratio of C41V:ethyl acetate of 50:50. Dynamic light scattering shows that the size of the hexosomes decreases as the concentration of stabilizer F127 or encapsulated Ketoprofen is increased. The lattice parameter in the hexagonal structure is calculated from small angle scattering data to be ca. 5.3 nm and is only slightly dependent on the amount of F127 and/or encapsulated Ketoprofen. Cryo electron microscopy reveals that the samples contain hexosomes and these coexist with spherical, likely F127 micelles. Lastly, hexosomes show a pH responsive release of Ketoprofen which could be useful for target delivery in the gastrointestinal tract. © 2019 Elsevier Inc., Financial support from the Ministry of Science, Innovation and Universities (grant CTQ2017-84998-P ) and Spanish National Research Council (CSIC) (grant I-LINK 1188) is gratefully acknowledged. Synchrotron SAXS experiments were performed at BL11-NCD beamline at ALBA Synchrotron Light Facility with the collaboration of ALBA staff. DLS measurements have been performed at the Nanostructured Liquid Characterization Unit, located at the Institute of Advanced Chemistry of Catalonia (IQAC), belonging to the Spanish National Research Council (CSIC) and affiliated to the NANBIOSIS ICTS of the Biomedical Networking Research Center (CIBER-BBN). Appendix A, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ethylcellulose nanoparticles as a new “in vitro” transfection tool for antisense oligonucleotide delivery

  • Leitner, S.
  • Grijalvo, Santiago
  • Solans, Conxita
  • Eritja Casadellà, Ramón
  • García-Celma, M. J.
  • Calderó, Gabriela
Oil-in-water nano-emulsions have been obtained in the HEPES 20 mM buffer solution / [Alkylamidoammonium:Kolliphor EL = 1:1] / [6 weight% ethylcellulose in ethyl acetate] system over a wide oil-to-surfactant range and above 35 weight% aqueous component at 25 °C. The nano-emulsion with an oil-to-surfactant ratio of 70/30 and 95 weight% aqueous component was used for nanoparticles preparation. These nanoparticles (mean diameter around 90 nm and zeta potential of +22 mV) were non-toxic to HeLa cells up to a concentration of 3 mM of cationic species. Successful complexation with an antisense phosphorothioate oligonucleotide targeting Renilla luciferase mRNA was achieved at cationic/anionic charge ratios above 16, as confirmed by zeta potential measurements and an electrophoretic mobility shift assay, provided that no Fetal Bovine Serum is present in the cell culture medium. Importantly, Renilla luciferase gene inhibition shows an optimum efficiency (40%) for the cationic/anionic ratio 28, which makes these complexes promising for “in vitro” cell transfection., The DLS, zeta potential and Turbiscan analyses have been performed at the Nanostructured Liquid Characterization Unit, located at the Institute of Advanced Chemistry of Catalonia (IQAC), belonging to the Spanish National Research Council (CSIC) and affiliated to the NANBIOSIS ICTS of the Biomedical Networking Center (CIBER-BBN). CIBER-BBN is an initiative funded by the VI National R&D&I Plan 2008-2011. Financial support from MINECO (grant CTQ2017-84998-P (AEI/FEDER,UE) and Generalitat de Catalunya (grant 2009SGR-961) is acknowledged. S.L. is grateful to CIBER-BBN for a research scholarship. Colorcon and Bonderalia S.A./Quimivita S.A. and BASF are gratefully acknowledged for the gift of ethylcellulose, ricinoleamidopropyltrimonium methosulfate and Kolliphor EL respectively., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modulating size and surface charge of ethylcellulose nanoparticles through the use of cationic nano-emulsion templates

  • Calderó, Gabriela
  • Leitner, S.
  • García-Celma, M. J.
  • Solans, Conxita
Ethylcellulose nano-emulsions have been obtained by the low-energy phase inversion composition method in the Water / [Alkylamidoammonium: Cremophor WO7] / [6% ethylcellulose in ethyl acetate] system at 25 °C. It is shown that nano-emlulsions’ composition variables (oil-to-surfactant ratio, cationic: nonionic surfactant ratio and polymer and water content) produce changes in their droplet diameter, surface charge and colloidal stability following defined trends. Nano-emulsions with good stability, droplet diameters between about 120 and 200 nm and surface charge from about 10 to 50 mV have been obtained. Nano-emulsions are further used as templates for nanoparticle dispersions preparation, which show sizes and surface charges typically smaller and similar respectively to their nano-emulsion templates. Cationic: nonionic surfactant ratio has the highest influence on both, size and surface charge, followed by oil-to-surfactant ratio and water content. Interestingly, the positive charge of the nanoparticles can be depleted under diluting conditions in a time-dependent manner. © 2019 Elsevier Ltd, The DLS, zeta potential, viscosity and Turbiscan analyses have been performed at the Nanostructured Liquid Characterization Unit, located at the Institute of Advanced Chemistry of Catalonia (IQAC), belonging to the Spanish National Research Council (CSIC) and affiliated to the NANBIOSIS ICTS of the Biomedical Networking Center (CIBER-BBN). CIBER-BBN is an initiative funded by the VI National R&D&I Plan 2008-2011. Financial support from MINECO (grant CTQ2011-29336-C03-01 and CTQ2017-84998-P ) and Generalitat de Catalunya (grant 2017 SGR 1778 ) is acknowledged. S.L. is grateful to CIBER-BBN for a research scholarship. Colorcon and Bonderalia S.A./Quimivita S.A. are gratefully acknowledged for the gift of ethylcellulose and ricinoleamidopropyltrimonium methosulfate respectively. Appendix A, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Simple Method for Rheological Determination of Surfactant Layer Thickness, Adsorbed on Soft Rubber Particles

  • Singh, Manroshan
  • Tadros, Tharwat F.
  • Solans, Conxita
  • Booten, Karl
  • Levecke, Bart
  • Esquena, Jordi
Natural rubber latex is a colloidal suspension of particles, which is very important for many industrial applications. These latex particles are not only polydispersed but also very soft and deformable, which makes the prediction of rheological properties much difficult. Herein, the rheology of natural rubber latex has been studied at high particle concentrations, analyzing the effects of surfactant addition on colloidal stability. A hydrophobically modified inulin surfactant (INUTEC NRA) was selected for this study, since previous works had shown that this inulin surfactant imparts good colloidal stability to polystyrene latex particles. The most important objective was studying the influence of the surfactant on the particle adsorbed layer and determining the thickness of the adsorbed surfactant layer. The results showed that relative viscosity increased as a function of latex volume fraction and this increase became extremely sharp as the volume fraction approached the maximum packing volume fraction, as expected. This variation in viscosity with volume fraction has a complex behavior, which could not be analysed using conventional models based on hard-rigid spheres, such as Krieger-Dougherty (K-D) or Maron-Pierce (M-P). Herein, we describe a simple semiempirical method to determine the surfactant adsorbed layer thickness, based on the linear dependence of intrinsic viscosity with 1/(max-2, where  is the volume fraction of rubber particles and max is the maximum volume fraction at which viscosity tends to infinity. The difference in maximum packing fraction, with and without surfactant, allows the calculation of the adsorbed layer thickness,  ≈2.8 nm, which is a good estimate for the thickness of surfactant molecules adsorbed on latex particles. This surfactant thickness has been confirmed by direct measurements using Dynamic Light Scattering (DLS), which gave a value of 3.1 nm. Viscoelastic oscillatory measurements have also been performed, showing that natural rubber particle suspensions are predominantly elastic above =0.63 latex volume fractions. The elastic modulus has been analyzed as a function of surfactant concentration, confirming that stability of latex particles is mainly controlled by surfactant concentration., First, the authors greatly thank the Malaysian Rubber Board, Beneo (Belgium) and CreaChem (Belgium) for providing the financial support required in this joint research project. The authors also acknowledge the financial support from the Spanish Ministry of Science, Innovation and Universities (CTQ2014-52687-C3-1-P and CTQ2017-84998-P projects). Support from Generalitat de Catalunya (2014SGR1655 and 2017SGR1778 consolidated group awards; and TECCIT15-1-0009 and TECCIT16-1-0049 TECNIO awards) is also acknowledged. Characterization of latexes and rheological determinations was performed at the Nanostructured Liquid Characterization Unit, located at the Institute of Advanced Chemistry of Catalonia (IQAC) of the Spanish National Research Council (CSIC). This characterization unit is affiliated to the NANBIOSIS ICTS, ascribed to Centro de Investigación Biomédica en Red de Bioingeniería, Biomateriales y Nanomedicina, CIBER-BBN, which is financed by Instituto de Salud Carlos III. The authors also acknowledge the Grupo de Nanotecnología Farmacéutica, of the University of Barcelona (UB), in the Faculty of Pharmacy, which forms an Associated Unit to CSIC. Authors are also very grateful to the European Regional Development Fund (Fondo Europeo de Desarrollo Regional, FEDER), which provides financial support to government programs., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Formation and stabilization of multiple water-in-water-in-water (W/W/W) emulsions

  • Beldengrün, Yoran
  • Dallaris, V.
  • Jaén, C.
  • Protat, R.
  • Miras Hernández, Jonathan
  • Calvo, M.
  • García-Celma, M. J.
  • Esquena, Jordi
Multiple Water-in-Water-in-Water (W/W/W) emulsions were prepared, stabilized and characterized. The main objective was to find a simple and low-cost method for the preparation of W/W/W emulsions. The system composed of gelatin, maltodextrin and water was used, and two different methods were studied for producing multiple emulsions in this system. In the first method, maltodextrin-in-gelatin (M/G) emulsions with small droplet size were formed by pH-induced nucleation of maltodextrin droplets, and afterwards, maltodextrin-in-gelatin-in-maltodextrin (M/G/M) multiple emulsions were obtained by dispersing M/G droplets into maltodextrin solutions. The second method consisted in cooling down gelatin-in-maltodextrin (G/M) emulsions, leading to the spontaneous formation of inner maltodextrin droplets. The latter method allowed producing more homogenous M/G/M multiple emulsion droplets. The colloidal stability of such emulsions greatly improved with the addition of mucin particles, which is a glycoprotein that adsorbs on the G/M interface. Stable M/G/M multiple emulsions have been prepared and characterized by fluorescence optical microscopy, where contrast has been enhanced through covalently labelling the various components with fluorescent dyes. To our knowledge, this is the first report of a simple and cost-effective method for the production of multiple W/W/W emulsions, without using microfluidic techniques. Moreover, the present work also demonstrates that mucin microparticles can be effective stabilizers for protein-in-polysaccharide emulsions, and these dispersions can be easily prepared by phase transition methods., The authors greatly acknowledge the financial support from the Spanish Ministry of Economy and Competitiveness (CTQ2017-84998-P and CTQ2016-80645-R projects) and Marie Sklodowska Curie Initial Training Networks (FP7-PEOPLE-2013-ITN-606713, BIBAFOODS project). Support from Generalitat de Catalunya (2017SGR1778 and TECCIT15-1-0009) and Centro de Investigación Biomédica en Red de Bioingeniería, Biomateriales y Nanomedicina (CIBER-BBN), is also acknowledged. The authors also acknowledge the “Grupo de Nanotecnología Farmacéutica”, of the University of Barcelona (UB), in the Faculty of Pharmacy, which forms an Associated Unit to CSIC. Authors are also very grateful to the European Regional Development Fund (Fondo Europeo de Desarrollo Regional, FEDER), which provides support to these government programs.Characterization, except Confocal Microscopy, have been performed by the Nanostructured Liquid Characterization Unit, located at the Institute of Advanced Chemistry of Catalonia (IQAC), belonging to the Spanish National Research Council (CSIC) and affiliated to the NANBIOSIS ICTS of the Biomedical Networking Centre (CIBER-BBN), which is financed by Instituto de Salud Carlos III. Laser Confocal Optical Microscopy was performed at the Advanced Optical Microscopy Unit of the Scientific and Technological Centres of University of Barcelona. The authors also greatly thank Carlos Rodríguez-Abreu and Conxita Solans (IQAC-CSIC), and Allan Mackie and Josep Bonet (Universitat Rovira i Virgili, Spain) for very useful discussions., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Adaptable Photochromic Switches with Self-Aggregating Heterocyclic Azo Dyes, Retrospect and Prospect: 30 years of Formula conferences!

  • García-Amorós, Jaume
  • Castro, M. Cidália R.
  • Nonell, Santi
  • Vílchez, Susana
  • Esquena, Jordi
  • Raposo, Manuela M.
  • Velasco, Dolores
It is well-known that the thermal isomerization kinetics of photochromic azo dyes can be modulated by subtle changes in their chemical architecture. However, the availability of an orthogonal input to control the thermal relaxation of azo dyes is essential to enable access to multifunctional and adaptive photochromic switches based on these particular organic chromophores. In this work, we have designed and synthesized a new family of green-light-activated heterocyclic azo derivatives that modify their switching capabilities as a function of concentration. In this line, we have investigated their self-assembly and the nature of the supramolecular aggregates formed by means of dynamic light scattering, polarized optical microscopy, and X-ray diffraction. Indeed, imparting control over the self-assembly of these organic dyes allows to fine-tune their thermal relaxation time and produce adaptable photochromic switches. Specifically, swapping the azo dye concentration between values located above and below the corresponding critical aggregation concentration modifies significantly the relaxation time up to 250 times, i.e., from the millisecond to the microsecond timescale. Moreover, the optical density of the system can be switched back and forth hundreds of times, for both diluted and concentrated solutions, without any sign of fatigue. © 2019 American Chemical Society., Financial support for this research was obtained from the Ministerio de Economı́a y Competitividad (Spain, PGC2018-095477-B-I00, CTQ2016-78454-C2-1-R, and CTQ2017-84998-P MINECO/FEDER). Thanks are also due to Fundação para a Ciência e Tecnologia (Portugal) for financial support to the Portuguese NMR network (PTNMR, Bruker Avance III 400-Univ. Minho), FCT, and FEDER (European Fund for Regional Development)-COMPETEQREN-EU for financial support to the research centre CQ/UM [ref UID/QUI/00686/2013 and UID/QUI/0686/2016], and a PhD grant to M.C.R.C. (SFRH/BD/78037/2011)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

PLGA cationic nanoparticles, obtained from nano-emulsion templating, as potential DNA vaccines

  • Soler Besumbes, Eduard
  • Fornaguera, Cristina
  • Monge, Marta
  • García-Celma, M. J.
  • Carrión, Javier
  • Solans, Conxita
  • Dols-Pérez, Aurora
Polymeric nanoparticles offer advantageous characteristics as gene-delivery vectors such as biocompatibility and biodegradability. With this aim, a smart and innovative strategy was followed here: Cationic PLGA nano-emulsions, prepared by a low energy method, were used as templates to obtain cationic nanoparticles (NPs) able to easily complex with nucleic acids (i.e. plasmid DNA) by electrostatic interactions. The strategy employed to produce stable positively-charged nanoparticles was the use of non-ionic/cationic surfactant mixtures to stabilize template nano-emulsions. This methodology allowed obtaining nanoparticles with reproducible nanometric sizes and positive zeta potential values, appropriate to successfully complex with nucleic acids, resulting in nanometric spherical polyplexes. Nanoparticles, plasmids and polyplexes proved to be biocompatible at the optimal concentration. Therefore, we can conclude that we have designed a novel strategy to efficiently obtain cationic polymeric nanoparticles that can be a promising approach to act as novel non-viral gene-delivery vectors, useful for many applications in gene therapy, such as gene vaccines. © 2019 Elsevier Ltd, Financial support from MINECO (grants CTQ2016-80645-R and CTQ2017-84998-P); Generalitat de Catalunya (grants 2014SGR1655 and 2017SGR1778), and CIBER-BBN are acknowledged. CIBER-BBN is an initiative funded by the Spanish National Plan for Scientific and Technical Research and Innovation 2013–2016, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions are financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund. Dr. Cristina Fornaguera is grateful to AGAUR for their Predoctoral Fellowship (grant FI-DGR 2012) and to MINECO for their Torres Quevedo Postdoctoral Fellowship(grant PTQ 2015). Authors thank the access to the facilities of TEM-SEM Casanova unit of the Centres Científics i Tecnològics (CCiTUB) of the University of Barcelona (UB) and its staff members for their technical advice., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Eco-friendly printing paste replacing urea-based formulations in cotton printing

  • Vílchez, Susana
  • López, Adaris
  • Miras Hernández, Jonathan
  • Bleda, María José
  • Manich, Albert M.
  • Puigventós, Nuria
  • Genís, Esteve
  • Esquena, Jordi
In textile printing, hydrotropic components are usually added to print paste formulations promoting the hydration of textile fabrics by disrupting the hydrogen bonding network between water molecules. For this purpose, urea is commonly used but nevertheless, its presence causes water eutrophication and their reduction or replacement by more environmentally-friendly products is required. In the present work, we have studied an alternative hydrotropic product (polyethylene glycol, PEG) to replace urea. A factorial design of experiments has been carried out to identify the factors that optimize several variables of interest such as viscosity of the printing paste and fabric colour strength. The results showed that a reduction of 70 wt% of urea was achieved by using PEG 400, while preserving the performance of printing formulation. The viscosity of these eco-friendly printing paste formulations was similar to that of the original urea-based formulations and, more interestingly, fabrics showed similar colour strength and fastness to those of fabrics printed by the conventional method., The authors acknowledge financial support from EEA-Grants Program (grant no. 20140916). The authors also greatly acknowledge the financial support from the Spanish Ministry of Economy and Competitiveness (grant no. CTQ2017-84998-P) and support from Generalitat de Catalunya (grant nos. 2017SGR1778 and TECCIT15-1-0009)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ultrasound/radiation-responsive emulsions

  • Calderó, Gabriela
  • Paradossi, Gaio
The design of emulsions containing systems able to respond to different kinds of perturbations is attracting increasing interest for biomedical purposes. Emulsions of phase-change droplets, which undergo a liquid-to-gas transition on ultrasound or radiation activation are the most representative examples of such emulsions. Activation should be achieved within clinically acceptable settings, demanding a careful design of such emulsions, encompassing the selection of the components as well as the preparation procedures. New developments making use of microfluidics or low-energy emulsification methods are emerging to ensure the production of droplets of controlled size and minimal polydispersity. Furthermore, investigations on the properties of the droplets shell offer new insight for the understanding of their stability and acoustic behaviour under ultrasound irradiation. Emulsion-mediated sonodynamic therapy and the ground-breaking research on the ultrasound-propelled motors are also discussed in this review, in the light of the most recent literature., This work was partially supported by EU H2020 ‘AMPHORA’, contract n. 766456. Financial support from the Spanish Ministry of Science, Innovation and Universities (CTQ2017-84998-P project), Agencia Estatal de Investigación (AEI), the European Regional Development Fund (Fondo Europeo de Desarrollo Regional, FEDER), and Generalitat de Catalunya (2017SGR1778 Consolidated Group Grant) is acknowledged. The collaboration of the Grupo de Nanotecnología Farmacéutica, of the University of Barcelona (UB), headed by MJ Garcia-Celma in the Faculty of Pharmacy and Food Sciences, which forms an R&D Associated Unit to CSIC, is also acknowledged. GC is currently a Serra Húnter Fellow at the Department of Pharmacy and Pharmaceutical Technology and Physical Chemistry of the Faculty of Pharmacy and Food Sciences of the University of Barcelona, Spain., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

1D materials from ionic self-assembly in mixtures containing chromonic liquid crystal mesogens†

  • Rodríguez-Abreu, Carlos
  • Kolen'ko, Yury V.
  • Kovnir, Kirill
  • Sánchez-Domínguez, Margarita
  • Goswami Shrestha, Rekha
  • Bairi, Partha
  • Ariga, Katsuhiko
  • Shrestha, Lok Kumar
Ionic self-assembly is a simple yet powerful method to obtain robust nanostructures. Herewith, we use mixtures of oppositely-charged porphyrins that can act as mesogens to form chromonic liquid crystals in water, i.e., molecular stacks with orientational (nematic) or positional (hexagonal) order. Electrostatic locking coupled with π–π interactions between aromatic groups within the stacks, together with inter-stack hydrogen bonding induce formation of all-organic crystalline nanofibers with high aspect ratio (a few tenths of nanometers in width but several tenths of micrometers in length) and that display branching. The nanofibers prepared from metal-free porphyrin units feature interesting optical properties, including an absorption spectrum that is different from the simple sum of the individual spectra of the components, which is attributed to a striking aggregation-induced chromism. When in contact with some polar organic solvents the materials become fluorescent, as a result of disaggregation. In a proof-of-concept, the obtained self-assembled one-dimensional (1D) materials were carbonized (yield ca. 60%) to produce nitrogen-doped carbon nanofibers that can be used as active electrode materials for energy storage applications., C. R. acknowledges the financial support from Generalitat de Catalunya (2017SGR1778 grant), and from the Spanish Ministry of Science, Innovation and Universities (CTQ2017-84998-P project). C. R. is also grateful to the Agencia Estatal de Investigación and to the European Regional Development Fund (Fondo Europeo de Desarrollo Regional, FEDER). We thank ALBA staff for their help and support in the Synchrotron SAXS experiments performed at BL11-NCD beamline at ALBA (Spain). This work is partially supported by supported by JSPS KAKENHI Grant Number JP 16H06518 (Coordination Asymmetry), CREST JST Grant Number JPMJCR1665, and Grants-in-Aid for Scientific Research (C) Grant Number 20K05590., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Wetting and interfacial properties of bitumen at room temperature, and the role of naturally present ionic molecules

  • Martínez-Rodríguez, María
  • Esquena, Jordi
Bitumen is a complex material with great interest because of technological applications in road construction. The properties of asphalt formulations greatly depend on adhesion of bitumen to gravel particles. In this context, colloidal and adhesion properties of bitumen are related to bitumen composition and surface tension. It is known that bitumen contain ionic species that define its interfacial properties. Many authors have denoted these molecules as “endogenous surfactants”, but nevertheless these ionic molecules might not be true surfactants. Herein, the physicochemical properties of bitumen are investigated at room temperature, which is not an easy task, since the extremely high viscosity of bitumen makes difficult to characterize its surface properties at low temperatures. First, characterization by FTIR, SWAXS, DSC and TGA has been performed. Zeta potential of bitumen-in-water emulsion droplets has also been measured as a function of a cationic surfactant concentration. It was found that zeta potential inverted from negative to positive, with surfactant addition. The point of charge inversion was used as a titration tool to determine the density of acid groups present on bitumen/water interface. Then, surface pH was calculated using the Ionizable Surface Group Model and Grahame equation. Ionic species of bitumen are partly soluble in water, and thus, able to decrease surface tension of water. The diffusion of these bitumen ionic species has been studied by measuring surface tension of water as a function of time, and applying Henry and Gibbs diffusion models. Regarding surface energy, it has been studied by depositing sessile drops of various liquids with different polarity, on bitumen thin films at room temperature, since this is the most appropriate method for highly viscous materials. The surface free energy and their respective polar and dispersive components, calculated by the Owens and Wendt approach, have been related to the chemical composition of bitumen, and the main factor is the presence of the ionic molecular species, which are naturally present in bitumen. All results have shown that important physicochemical parameters of highly viscous bitumen can be studied at room temperature., The authors greatly appreciate the financial support from Centro para el Desarrollo Tecnológico e Industrial, CDTI (FENIX project, CENIT 2007 - 1014) and from the Spanish Ministry of Science and Innovation (CTQ2008-06892-C03-01, CTQ2011-23842 and CTQ2017-84998-P grants). The authors are also thankful to CIESM (Now Ciesm-Intevia), especially to Fernando Valor-Hernández, José López-González and Esther Tomás-Fortún; and to Generalitat de Catalunya for the 2009SGR961 and 2017SGR1778 grants. M. Martínez-Rodríguez also acknowledges CSIC for her scholarships. The European Regional Development Found (Fondo Europeo de Desarrollo Regional, FEDER) that provides support to these goverment programs, is also acknowledged. The authors are very grateful to Ricardo Molina (IQAC-CSIC), who provided support and helpful discussions for the study of surface and diffusion properties. Authors also thank to Prof Enric Bertran of the ENPHOCAMAT Group (FEMAN) of the University of Barcelona, for facilitating the measurements of contact angle. In addition, the authors also acknowledge the “Grupo de Nanotecnología Farmacéutica”, of the Faculty of Pharmacy and Food Sciences, at the University of Barcelona (UB), that forms an R&D Associated Unit (“Unidad Asociada”) to CSIC. Finally, the authors acknowledge Josep Carilla-Auguet, from the Service of Thermal Analysis of IQAC, for his help in DSC determinations and advice in interpretation of results., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mechanochemical Synthesis of TiO2 Nanoparticles and Their Self-organization at Interfaces to Produce Emulsion-Templated Photocatalytic Porous Polymers

  • Vílchez, A.
  • Rodríguez-Abreu, Carlos
  • Esquena, Jordi
  • Botta, P. M.
Mechanochemical synthesis methods are solid-state processes that constitute an alternative to those based on the use of liquid solvents. Mechanochemical methods have potential for industrial use as they are simple, scalable and environmental friendly. The solid-state reactions in mechanochemical synthesis can be used to obtain nanoparticles with small size and well-controlled crystallinity, at very low cost. Herein, we report on the mechanochemical synthesis of TiO2 photocatalytic nanoparticles, with controlled particle size and crystalline structure. Moreover, we also show that the bandgap of these TiO2 nanoparticles can be modified by carbon doping, so that they can display photocatalytic activity under visible light. The photocatalytic performance of various TiO2 nanoparticles has been evaluated by measuring the degradation of dyes. Moreover, upon convenient surface hydrophobization, the TiO2 nanoparticles can adsorb on liquid/liquid interfaces and become good stabilizers for highly concentrated emulsions. Such particle-stabilized emulsions were used as templates for the preparation of macroporous photocatalytic materials with a polymer matrix (photocatalytic polyHIPE)., The funding was supported by Ministerio de Ciencia, Innovación y Universidades (Grant No. CTQ2017-84998-P), European Regional Development Fund (Grant No. CTQ2017-84998-P) and Consejo Nacional de Investigaciones Científicas y Técnicas., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Short and ultrashort antimicrobial peptides anchored onto soft commercial contact lenses inhibit bacterial adhesion

  • Salvagni, Emiliano
  • García, Clara
  • Manresa, Ángeles
  • Müller-Sánchez, Claudia
  • Reina, Manuel
  • Rodríguez-Abreu, Carlos
  • García-Celma, M. J.
  • Esquena, Jordi
Commercial soft contact lenses were chemically modified to incorporate antibacterial properties. Contact lenses and especially soft contact lenses present a risk of eye microbial infection that eventually may lead to vision loss. This is a significant health issue given the large population of contact lenses wearers worldwide. In order to introduce bactericidal activity in hydrogel contact lenses, one short and one ultrashort antimicrobial peptides, LKKLLKLLKKLLKL (LK) and IRIRIRIR (IR), were selected. These peptides were anchored on the surface of contact lenses using a linker (1,4-butanediol diglycidyl ether) under mild conditions (room temperature, pH = 7.4). Physical and chemical properties of peptide-functionalized contact lenses were investigated through several analytical techniques including wettability, Raman confocal microscopy, fluorescence studies, refractometry and spectrophotometry. These studies demonstrated that contact lens modification occurred at the nanolevel (ng/lens). Bacterial cultures showed that peptide-functionalized contact lenses can drastically reduce bacterial adhesion and viability when exposed to Pseudomonas aeruginosa and Staphylococcus aureus. These systems offer the potential to minimise corneal bacterial infection and represent a suitable platform for future ophthalmic devices., The authors greatly acknowledge financial support from Generalitat de Catalunya (Tecnospring Program, TECSPR14-2-0044, and Consolidated Group 2017SGR1778), and from the Spanish Ministry of Science, Innovation and Universities (CTQ2017-84998-P and CTQ2016-80645-R). The authors are also very grateful to Agencia Estatal de Investigación and to the European Regional Development Fund. Support and collaboration received from the Iberian Nanotechnology Laboratory (Portugal) is acknowledged. The authors also acknowledge the “Grupo de Nanotecnología Farmacéutica”, of the University of Barcelona (UB), in the Faculty of Pharmacy and Food Sciences, which forms an Associated Unit to CSIC. Functionalized contact lenses were developed at the Institute of Advanced Chemistry of Catalonia (IQAC-CSIC), and characterization of contact lenses was carried out at the International Iberian Nanotechnology Laboratory (INL), in Braga, Portugal. The support provided by Yury Kolen'ko (INL) is acknowledged. Inhibition of bacteria was performed at the Section of Microbiology of the Biology, Health and Environment Department of the Faculty of Pharmacy, and cytotoxicity determinations were performed at the CellTec unit of the Faculty of Biology, both in the University of Barcelona. Refractive indices were measured in University of Minho (Braga, Portugal), with guidance from Madalena Lira. Raman Spectroscopy was performed in INL (Braga, Portugal), with assistance by Maria de Fátima Guimarães Cerqueira. Optical microscopy observations were carried out at the Nanostructured Liquid Characterization Unit, in the Institute of Advanced Chemistry of Catalonia (IQAC), of the Spanish National Research Council (CSIC), which is affiliated to the NANBIOSIS ICTS of the Networking Research Center on Bioengineering, Biomaterials and Nanomedicine (CIBER-BBN)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A nanocellulose-based platform towards targeted chemo-photodynamic/photothermal cancer therapy

  • Do, Thu Thi Anh
  • Grijalvo, Santiago
  • Imae, Toyoko
  • García-Celma, M. J.
  • Rodríguez-Abreu, Carlos
Cellulose nanocrystals (CNCs) have advantages as drug delivery carriers because of their biocompatibility and the presence of hydroxyl groups which favor chemical modification and drug binding. The present study describes the development of novel multifunctional rod-like CNCs-based carriers as therapeutic platforms: CNCs were hybridized with folic acid for actively targeting tumor cells, carbon dots (Cdots) for both imaging and photodynamic/photothermal treatments and doxorubicin (DOX) as an anticancer drug. Hybridized carriers displayed excellent drug-loading capacity. Moreover, Cdots-containing hybrids showed fluorescence and photosensitized singlet oxygen generation and photothermal behavior. Carriers exhibited pH-sensitive drug release because of changing interactions with DOX, and this release proved to be effective against in vitro cervical cancer cells, as evidenced by dose-dependent reduced cellular viabilities. Additionally, DOX release was promoted by light irradiation and the photodynamic behavior by reactive oxygen species was confirmed. These results demonstrate the potential of multifunctional CNCs-based carriers as platforms for multimodal photodynamic/photothermal-chemotherapy., C.R. is grateful to the financial support from the Spanish Ministry of Economy and Competitiveness (CTQ2017-84998-P project), the European Regional Development Fund, Generalitat de Catalunya (2017SGR01778) and Centro de Investigación Biomédica en Red de Bioingeniería, Biomateriales y Nanomedicina (CIBER-BBN). Support from the I-LINK 1188 project (CSIC) is also acknowledged. T.T.A.D. thanks the National Taiwan University of Science and Technology for kind financial support through a student scholarship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Deconstruction of technical grade diglycerol isostearate enables the controlled preparation of hexosomes and liposomes

  • Magaña, José Rodrigo
  • Esquena, Jordi
  • Solans, Conxita
  • Rodríguez-Abreu, Carlos
Glycerol-based technical grade surfactants of industrial interest generally contain a mixture of components with diverse composition. Consequently, their use cannot be generalized since the properties or the technical grade product will likely depend on batches and source. Herein, we address this issue by deconvoluting the role of individual components and pondering their influence on the phase behavior of mixtures. Technical grade diglycerol-monoisostearate (C41) was separated into different fractions based on polarity differences. Three fractions are obtained, which contain mainly unreacted diglycerol, the monoester and higher esterification degree amphiphiles. The formation of a single-phase reverse hexagonal liquid crystal (H2) in the water/C41 system is hindered by the presence of unreacted diglycerol, which dehydrates the hydrophilic channels of the H2 phase. On the other hand, the neat monoester forms a thermotropic lamellar liquid crystalline phase that melts at c.a. 40 °C, as confirmed by X-ray scattering (SAXS) and differential calorimetry (DSC). The formation of the lamellar phase in the neat monoester is ascribed to branching in the alkyl chain. The monoester also forms lamellar liquid crystals mixed with water and remains stable up to high water contents. Moreover, the addition of the higher esterification degree amphiphiles to the monoester/water mixtures promotes a transition from the lamellar phase to a reverse hexagonal one, confirmed by polarized optical microscopy and SAXS. Such transitions can be somehow predicted by calculations of the molecular packing parameters of mixtures. Similar to the lamellar phase, the reverse hexagonal liquid crystal remains stable in excess water. Finally, the coexistence between lamellar or hexagonal phases in excess water is harnessed to produce unilamellar vesicles and hexosomes, as confirmed by dynamic light scattering, SAXS, and cryo-electron microscopy., Financial support from the Spanish Ministry of Science and Innovation (CTQ2017-84998-P project), Agencia Estatal de Investigación, European Regional Development Fund, Generalitat de Catalunya (2017SGR01778) and Centro de Investigación Biomédica en Red de Bioingeniería, Biomateriales y Nanomedicina (CIBER-BBN) is gratefully acknowledged. Scattering measurements have been performed at the Nanostructured Liquid Characterization Unit, located at the Institute of Advanced Chemistry of Catalonia (IQAC), belonging to the Spanish National Research Council (CSIC) and affiliated to the NANBIOSIS ICTS of the Biomedical Networking Research Center (CIBER-BBN). We acknowledge Dr. Rafael Núñez-Ramírez from the electron microscopy unit of the Center for Biological Research Margarita Salas (Cib-CSIC) for his help on the cryo-TEM observations. The authors also acknowledge the “Grupo de Nanotecnología Farmacéutica” of the University of Barcelona (UB), in the Faculty of Pharmacy, which forms an Associated Unit to CSIC., Peer reviewed