Pasar al contenido principal

ESTUDIO DEL EFECTO DEL SULFURO DE HIDROGENO EN PROCESOS DE COMBUSTION DE DIFERENTES MEZCLAS GASEOSAS Y SU IMPACTO SOBRE LAS EMISIONES CONTAMINANTES

CTQ2015-65226-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2015
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Dirección General de Investigación Científica y Técnica
Centro beneficiario UNIVERSIDAD DE ZARAGOZA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Escaping undesired gas-phase chemistry: Microwave-driven selectivity enhancement in heterogeneous catalytic reactors

  • Ramírez, Adrian
  • Hueso, José L.
  • Abian, Olga
  • Alzueta, M.U.
  • Mallada, Reyes
  • Santamaría, Jesús
Research in solid-gas heterogeneous catalytic processes is typically aimed toward optimization of catalyst composition to achieve a higher conversion and, especially, a higher selectivity. However, even with the most selective catalysts, an upper limit is found: Above a certain temperature, gas-phase reactions become important and their effects cannot be neglected. Here, we apply a microwave field to a catalyst-support ensemble capable of direct microwave heating (MWH). We have taken extra precautions to ensure that (i) the solid phase is free from significant hot spots and (ii) an accurate estimation of both solid and gas temperatures is obtained. MWH allows operating with a catalyst that is significantly hotter than the surrounding gas, achieving a high conversion on the catalyst while reducing undesired homogeneous reactions. We demonstrate the concept with the CO 2 -mediated oxidative dehydrogenation of isobutane, but it can be applied to any system with significant undesired homogeneous contributions., Financial support from the European Research Council Advanced Grant (HECTOR267626), the Regional Government of Aragon (DGA), and the MINECO and FEDER (project CTQ2015-65226) is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A study of dimethyl carbonate conversion and its impact to minimize soot and NO emissions

  • Alzueta, M. U.
  • Salinas, Pablo
  • Millera, Ángela
  • Bilbao, Rafael
  • Abián, María
6 figures, 3 tables.-- Supplementary material under CC-BY license https://creativecommons.org/licenses/by/4.0/, Fuel reformulation through the use of oxygenated compounds e.g. dimethyl carbonate (DMC) is a potential option both to reduce the harmful soot emissions and to overcome the dependence on fossil fuels since many of them are bio-derived fuels. DMC presents a relative high oxygen content as compared with other additives and suitable characteristics to be used in combustion systems. The different fundamental aspects of the DMC combustion process including its oxidation behavior its tendency to produce soot and the role of the NO presence in the reaction system were studied. Experiments were conducted under well controlled conditions using specifically designed flow reactor systems. Results demonstrated the low tendency of DMC to form soot compared to other oxygenates and its capacity to contribute to NO reduction under specific fuel-rich conditions. Modeling calculations successfully reproduce reasonably well the experimental trends observed and emphasized the sensitivity of the results to the thermodynamic data of DMC and DMC derived species., Authors acknowledge the Aragón Government and the European Social Fund, GPT group, and MINECO and FEDER (Project CTQ2015-65226-R) for financial support. Dr. M. Abián acknowledges the MINECO and Instituto de Carboquímica (ICB-CSIC) for the post-doctoral grant awarded (FPDI-2013-16172).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Importance of Vanadium-Catalyzed Oxidation of SO2 to SO3 in Two-Stroke Marine Diesel Engines

  • Colom, J.M.
  • Alzueta, M.U.
  • Christensen, J.M.
  • Glarborg, P.
  • Cordtz, R.
  • Schramm, J.
Low-speed marine diesel engines are mostly operated on heavy fuel oils, which have a high content of sulfur and ash, including trace amounts of vanadium, nickel, and aluminum. In particular, vanadium oxides could catalyze in-cylinder oxidation of SO2 to SO3, promoting the formation of sulfuric acid and enhancing problems of corrosion. In the present work, the kinetics of the catalyzed oxidation was studied in a fixed-bed reactor at atmospheric pressure. Vanadium oxide nanoparticles were synthesized by spray flame pyrolysis, i.e., by a mechanism similar to the mechanism leading to the formation of the catalytic species within the engine. Experiments with different particle compositions (vanadium/sodium ratio) and temperatures (300–800 °C) show that both the temperature and sodium content have a major impact on the oxidation rate. Kinetic parameters for the catalyzed reaction are determined, and the proposed kinetic model fits well with the experimental data. The impact of the catalytic reaction is studied with a phenomenological zero-dimensional (0D) engine model, where fuel oxidation and SOx formation is modeled with a comprehensive gas-phase reaction mechanism. Results indicate that the oxidation of SO2 to SO3 in the cylinder is dominated by gas-phase reactions and that the vanadium-catalyzed reaction is at most a very minor pathway.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A study of dimethyl carbonate conversion and its impact to minimize soot and NO emissions

  • Alzueta, María U.
  • Salinas, Pablo
  • Millera, Ángela
  • Bilbao, Rafael.
  • Abián, María
Fuel reformulation through the use of oxygenated compounds e.g. dimethyl carbonate (DMC) is a potential option both to reduce the harmful soot emissions and to overcome the dependence on fossil fuels since many of them are bio-derived fuels. DMC presents a relative high oxygen content as compared with other additives and suitable characteristics to be used in combustion systems. The different fundamental aspects of the DMC combustion process including its oxidation behavior its tendency to produce soot and the role of the NO presence in the reaction system were studied. Experiments were conducted under well controlled conditions using specifically designed flow reactor systems. Results demonstrated the low tendency of DMC to form soot compared to other oxygenates and its capacity to contribute to NO reduction under specific fuel-rich conditions. Modeling calculations successfully reproduce reasonably well the experimental trends observed and emphasized the sensitivity of the results to the thermodynamic data of DMC and DMC derived species.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Effect of H2S on the S-PAH formation during ethylene pyrolysis

  • Adánez-Rubio, I.
  • Millera, Á.
  • Bilbao, R.
  • Alzueta, M.U.
The effect of the H2S presence on the formation of six different sulphurated polycyclic hydrocarbons (S-PAH), during the pyrolysis of ethylene-H2S mixtures, has been studied in a tubular flow reactor installation. Experiments with different inlet H2S concentrations (0.3, 0.5 and 1%) and temperatures of reaction (between 1075 and 1475 K) have been carried out. The 16 compounds that the Environmental Protection Agency (EPA) has stated as EPA-PAH priority pollutants were also analysed. EPA-PAH compounds were the majority of quantified PAH, and also S-PAH were found and quantified. For temperatures studied, the S-PAH/EPA-PAH ratio values showed a maximum value at 1075 K and a minimum value at 1175 K. With respect to the effect of the inlet concentration of H2S, the S-PAH/EPA-PAH ratio values increased with the increase of the H2S concentration.