Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Effect of H2S on the S-PAH formation during ethylene pyrolysis

  • Adánez-Rubio, I.
  • Millera, Á.
  • Bilbao, R.
  • Alzueta, M.U.
The effect of the H2S presence on the formation of six different sulphurated polycyclic hydrocarbons (S-PAH), during the pyrolysis of ethylene-H2S mixtures, has been studied in a tubular flow reactor installation. Experiments with different inlet H2S concentrations (0.3, 0.5 and 1%) and temperatures of reaction (between 1075 and 1475 K) have been carried out. The 16 compounds that the Environmental Protection Agency (EPA) has stated as EPA-PAH priority pollutants were also analysed. EPA-PAH compounds were the majority of quantified PAH, and also S-PAH were found and quantified. For temperatures studied, the S-PAH/EPA-PAH ratio values showed a maximum value at 1075 K and a minimum value at 1175 K. With respect to the effect of the inlet concentration of H2S, the S-PAH/EPA-PAH ratio values increased with the increase of the H2S concentration.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Exploratory study of polycyclic aromatic hydrocarbons occurrence and distribution in manure pyrolysis products

  • Adánez-Rubio, I.
  • Fonts, I.
  • Blas, P. de
  • Viteri, F.
  • Gea, G.
  • Alzueta, M.U.
The occurrence and distribution of polycyclic aromatic hydrocarbons (PAH) have been investigated in the products derived from the pyrolysis of pig manure at low temperatures (<550 °C) in a fixed bed reactor. The focus was on the sixteen PAH identified as priority pollutants by the US Environment Protection Agency (EPA). The pyrolysis does not generate a significant additional amount of EPA-PAH to that existing in the original pig manure, under the operational conditions studied (<550 °C). While the total EPA-PAH yield does not indicate a notable dependence on the pyrolysis temperature, the EPA-PAH distribution among the three pig manure pyrolysis products as well as the speciation changed significantly with the temperature. The proportion of heavy PAH species increased as the temperature increased. The initial EPA-PAH in the manure samples plays a significant role in both their concentration and speciation in the biochar. The relationship of the EPA-PAH concentration and speciation in the biochar with those of the raw material was corroborated with a cow manure sample and the biochars obtained from its pyrolysis. For this reason, feedstocks with low EPA-PAH concentrations are recommended in order to obtain biochars with concentrations below the maximum allowed threshold established for their use as a soil enhancer by the International Biochar Initiative (IBI) and in the European Biochar Certificate.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Experimental Study of the Pyrolysis of NH3under Flow Reactor Conditions

  • Benés, M.
  • Pozo, G.
  • Abián, M.
  • Millera, Á.
  • Bilbao, R.
  • Alzueta, M.U.
The possibility of using ammonia (NH3), as a fuel and as an energy carrier with low pollutant emissions, can contribute to the transition to a low-carbon economy. To use ammonia as fuel, knowledge about the NH3 conversion is desired. In particular, the conversion of ammonia under pyrolysis conditions could be determinant in the description of its combustion mechanism. In this work, pyrolysis experiments of ammonia have been performed in both a quartz tubular flow reactor (900-1500 K) and a non-porous alumina tubular flow reactor (900-1800 K) using Ar or N2 as bath gas. An experimental study of the influence of the reactor material (quartz or alumina), the bulk gas (N2 or Ar), the ammonia inlet concentration (1000 and 10a 000 ppm), and the gas residence time [2060/T (K)-8239/T (K) s] on the pyrolysis process has been performed. After the reaction, the resulting compounds (NH3, H2, and N2) are analyzed in a gas chromatograph/thermal conductivity detector chromatograph and an infrared continuous analyzer. Results show that H2 and N2 are the main products of the thermal decomposition of ammonia. Under the conditions of the present work, differences between working in a quartz or non-porous alumina reactor are not significant under pyrolysis conditions for temperatures lower than 1400 K. Neither the bath gas nor the ammonia inlet concentration influence the ammonia conversion values. For a given temperature and under all conditions studied, conversion of ammonia increases with an increasing gas residence time, which results into a narrower temperature window for NH3 conversion.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Interaction of NH3 and NO under combustion conditions. Experimental flow reactor study and kinetic modeling simulation

  • Alzueta, M.U.
  • Ara, L.
  • Mercader, V.D.
  • Delogu, M.
  • Bilbao, R.
The interaction between ammonia and NO under combustion conditions is analyzed in the present work, from both experimental and kinetic modelling points of view. An experimental systematic study of the influence of the main variables for the NH3sbnd]NO interaction is made using a laboratory tubular flow reactor installation. Experiments are performed at atmospheric pressure and variables analyzed include: temperature in the 700–1500 K range, air stoichiometry, from pyrolysis to very oxidizing conditions, and the NH3/NO ratio, in the 0.7–3.5 range. Nitrogen and argon have been used as diluent gas. A literature reaction mechanism has been used to simulate the present experimental results and discuss the main findings. Reaction path analysis has allowed the identification of the reaction routes under the studied conditions. The simulations reflect the main experimental trends observed. Main results show that NO reduction by NH3 occurs at any conditions studied, but is more intense under oxygen excess conditions. Interactions of NH3 and NO proceeds in a molar basis with optimum conversions of NO of up to almost 100%. © 2021
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Thermodynamic and physical property estimation of compounds derived from the fast pyrolysis of lignocellulosic materials

  • Fonts, Isabel
  • Atienza-Martinez, Maria
  • Carstensen, Hans-Heinrich
  • Benes, Mario
  • Pinheiro Pires, Anamaria Paiva
  • Garcia-Perez, Manuel
  • Bilbao, Rafael
The development of biomass pyrolysis oil refineries is a very promising path for the production of biofuels and bioproducts from lignocellulosic materials. Given that bio-oil is a complex mixture of organic compounds, the production of valuable bioproducts may imply the use of different separation processes, such as distillation, selective condensation, crystallization based on melting points, liquid-liquid extraction or adsorption, and/or upgrading treatments, such as catalytic cracking or hydrodeoxygenation. In this context, the main objectives of this work are (1) to propose a simple but representative composition of the bio-oil, which can be used as a bio-oil surrogate, and (2) to determine selected thermodynamic, physical, and molecular properties of the organic compounds included in the bio-oil surrogate using different estimation methods and calculation procedures. These properties are critical temperature, critical pressure, critical volume, normal boiling point, enthalpy of vaporization, vapor pressure curves, normal melting point, enthalpy of fusion, heat capacities of gas, liquid, and solid, gas and liquid standard enthalpy of formation, gas standard Gibbs free energy of formation, Hansen solubility parameters, molecular volume, and molecular diameter. This group of properties has been selected for their possible application in the simulation or design of thermochemical, separation, and upgrading processes. Additionally, the suitability of the estimated thermodynamic properties and the proposed surrogate composition has been assessed by comparing experimental and literature data with the apparent enthalpy of formation of the bio-oil predicted from the weight-averaged contributions of the compounds as well as the heat required for the pyrolysis process at 500 °C.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

High pressure ammonia oxidation in a flow reactor

  • García-Ruiz, P.
  • Uruén, M.
  • Abián, M.
  • Alzueta, M.U.
The present work deals with an experimental and modeling analysis of ammonia oxidation at high pressure (up to 40 bar), in the 600–1275 K temperature range using a quartz tubular reactor and argon as diluent. The impact of temperature, pressure, oxygen stoichiometry and presence of NO has been analyzed on the concentrations of NH3 and N2 obtained as main products of ammonia oxidation. The main results obtained indicate that increasing either pressure or stoichiometry results in a shift of NH3 conversion to lower temperatures. The effect of pressure is particularly significant in the low range of pressures studied. The main product of ammonia oxidation is N2, while NO, NO2 and N2O concentrations are below the detection limit for all the conditions considered. The experimental results are simulated and interpreted in terms of a literature detailed chemical kinetic mechanism, which, in general, predicts satisfactorily the experimental results.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Experimental and Modeling High-Pressure Study of Ammonia–Methane Oxidation in a Flow Reactor

  • García-Ruiz, Pedro
  • Salas, Iris
  • Casanova, Eva
  • Bilbao, Rafael
  • Alzueta, María U.
The present work deals with an experimental and modeling analysis of the oxidation of ammonia–methane mixtures at high pressure (up to 40 bar) in the 550–1250 K temperature range using a quartz tubular reactor and argon as a diluent. The impact of temperature, pressure, oxygen stoichiometry, and CH4/NH3 ratio has been analyzed on the concentrations of NH3, NO2, N2O, NO, N2, HCN, CH4, CO, and CO2 obtained as main products of the ammonia–methane mixture oxidation. The main results obtained indicate that increasing either the pressure, CH4/NH3 ratio, or stoichiometry results in a shift of NH3 and CH4 conversion to lower temperatures. The effect of pressure is particularly significant in the low range of pressures studied. The main products of ammonia oxidation are N2, NO, and N2O while NO2 concentrations are below the detection limit for all of the conditions considered. The N2O formation is favored by increasing the CH4/NH3 ratio and stoichiometry. The experimental results are simulated and interpreted in terms of an updated detailed chemical kinetic mechanism, which, in general, is able to describe well the conversion of both NH3 and CH4 under almost all of the studied conditions. Nevertheless, some discrepancies are found between the experimental results and model calculations.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

High-pressure study of the conversion of NH3/H2 mixtures in a flow reactor

  • García-Ruiz, Pedro
  • Castejón, Daniel
  • Abengochea, Miguel
  • Bilbao, Rafael
  • Alzueta, María U.
Carbon free fuels such as hydrogen (H2) and ammonia (NH3) will probably play a fundamental role owing to their potential for clean combustion without CO2 emissions. To contribute to the knowledge and development of technologies based on carbon free combustion, the present work deals with an experimental and kinetic analysis of ammonia oxidation in its mixtures with hydrogen at high pressure (up to 40 bar), in the 250–1250 K temperature range using a quartz tubular reactor and argon as bath gas. The impact of temperature, pressure, stoichiometry and H2/NH3 ratio on the concentrations of NH3, NO, NO2, N2O, and N2 obtained as main products of oxidation has been analyzed. The main results indicate that either increasing pressure, H2/NH3 ratio or oxygen availability results in a shift of NH3 and H2 conversion to lower temperatures. The NH3 and H2 consumptions are promoted by the reactions that produce NH2, H, OH, O, HO2 and HNO species and inhibited by reactions that form H2O, NH3, NO, H2NO and O2 species. The pressure effect is particularly significant in the low range of pressures studied. The main ammonia oxidation nitrogen products are N2 and N2O, while NO and NO2 concentrations are below the detection limit under all considered conditions. N2O formation is favored by increasing stoichiometry, pressure and H2/NH3 ratio. The experimental results are simulated and interpreted in terms of a literature detailed chemical kinetic mechanism, which, in general, is able to describe quite well both the H2 and NH3 conversion profiles under the studied conditions.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Study of the oxidation of ammonia in a flow reactor. Experiments and kinetic modeling simulation

  • Abian, M.
  • Benes, M.
  • de Goni, A.
  • Muñoz, B.
  • Alzueta, M.U.
The present work is focused on the analysis of the ammonia oxidation process and the formation of main nitrogen oxides (NO, NO2 and N2O) over a wide range of temperatures and O2 reaction environments. Experiments are performed at atmospheric pressure in a laboratory quartz tubular flow reactor, covering the temperature range of 875 to 1450 K and for different air excess ratios (from pyrolysis to very oxidizing conditions). The experimental results are simulated and interpreted in terms of a detailed chemical-kinetic mechanism. Reaction path and sensitivity analyses are used to delineate the NH3 oxidation scheme.