Pasar al contenido principal

ESTUDIO DE LA OXIDACION DE MEZCLAS DE AMONIACO Y COMBUSTIBLES OBTENIDOS EN PROCESOS DE BIOREFINERIA Y SU IMPACTO SOBRE LAS EMISIONES CONTAMINANTES

PID2021-124032OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE ZARAGOZA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Conversion of NH3 and NH3-NO mixtures in a CO2 atmosphere. A parametric study

  • Alzueta, María U.
  • Giménez-López, Jorge
  • Mercader, Víctor D.
  • Bilbao, Rafael
The present work addresses the oxidation of ammonia and ammonia-nitric oxide mixtures in a CO2 atmosphere, characteristic of oxy-fuel processes and/or biogas combustion, from both experimental and kinetic modelling points of view. A parametric study of NH3 and NH3/NO mixtures oxidation is carried out, evaluating the influence of the temperature (700–1500 K), stoichiometry (from pyrolysis, λ = 0, to significantly oxidizing conditions, λ = 3.3), gas residence time (low values, 195/T(K) s and high values, 3100/T(K) s) and NH3/NO ratio (0.5–2.2), at atmospheric pressure under well-controlled laboratory conditions using two tubular flow reactor setups. Experimental results have been simulated with an updated literature reaction mechanism, which has been used to interpret the experimental observations.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

High pressure ammonia oxidation in a flow reactor

  • García-Ruiz, P.
  • Uruén, M.
  • Abián, M.
  • Alzueta, M.U.
The present work deals with an experimental and modeling analysis of ammonia oxidation at high pressure (up to 40 bar), in the 600–1275 K temperature range using a quartz tubular reactor and argon as diluent. The impact of temperature, pressure, oxygen stoichiometry and presence of NO has been analyzed on the concentrations of NH3 and N2 obtained as main products of ammonia oxidation. The main results obtained indicate that increasing either pressure or stoichiometry results in a shift of NH3 conversion to lower temperatures. The effect of pressure is particularly significant in the low range of pressures studied. The main product of ammonia oxidation is N2, while NO, NO2 and N2O concentrations are below the detection limit for all the conditions considered. The experimental results are simulated and interpreted in terms of a literature detailed chemical kinetic mechanism, which, in general, predicts satisfactorily the experimental results.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

NH3 oxidation and NO reduction by NH3 in N2/Ar and CO2 atmospheres

  • Alzueta, María U.
  • Mercader, Víctor D.
  • Giménez-López, Jorge
  • Bilbao, Rafael
Impact of using CO2 or N2/Ar as bath gas, representative respectively of oxy-fuel or air combustion scenarios, has been evaluated on the oxidation of ammonia under a variety of operating conditions in a combined experimental and simulation study. Variables of relevance as temperature and oxygen stoichiometry have been considered at atmospheric pressure and under carefully controlled experimental conditions. Additionally, the impact of the presence of NO, which can be formed from ammonia oxidation, has also been evaluated. The experimental results obtained have been simulated with significant success with a detailed literature kinetic mechanism, which has been further used to interpret the main experimental observations. The results obtained are of interest in the power and energy industry, and can be used for guiding the co-firing of NH3 and carbon containing fuels.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Conversion of NH3/CO/NO/CO2 mixtures

  • Alzueta, María U.
  • Salas, Iris
The present work addresses the impact of the presence of both CO and NO during the conversion of NH3 using CO2 or N2/Ar as bath gas, which would correspond to oxy-fuel or conventional air fuel combustion processes respectively. The variation of temperature and oxygen excess ratio is studied in a flow reactor setup at atmospheric pressure. Experimental results have been simulated with a literature detailed kinetic mechanism and the main observations have been discussed. The main results indicate that the effect of the presence of CO is less important than in other reactive systems. Conversion of NH3 is almost insensitive to the presence of CO, and the temperature regime for NH3 conversion is only significantly affected under fuel-lean conditions. The present results extend the experimental database on ammonia conversion, for different mixtures and conditions, and contribute to evaluate the possibilities of improving the ignition of this compound.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

High-pressure study of the conversion of NH3/H2 mixtures in a flow reactor

  • García-Ruiz, Pedro
  • Castejón, Daniel
  • Abengochea, Miguel
  • Bilbao, Rafael
  • Alzueta, María U.
Carbon free fuels such as hydrogen (H2) and ammonia (NH3) will probably play a fundamental role owing to their potential for clean combustion without CO2 emissions. To contribute to the knowledge and development of technologies based on carbon free combustion, the present work deals with an experimental and kinetic analysis of ammonia oxidation in its mixtures with hydrogen at high pressure (up to 40 bar), in the 250–1250 K temperature range using a quartz tubular reactor and argon as bath gas. The impact of temperature, pressure, stoichiometry and H2/NH3 ratio on the concentrations of NH3, NO, NO2, N2O, and N2 obtained as main products of oxidation has been analyzed. The main results indicate that either increasing pressure, H2/NH3 ratio or oxygen availability results in a shift of NH3 and H2 conversion to lower temperatures. The NH3 and H2 consumptions are promoted by the reactions that produce NH2, H, OH, O, HO2 and HNO species and inhibited by reactions that form H2O, NH3, NO, H2NO and O2 species. The pressure effect is particularly significant in the low range of pressures studied. The main ammonia oxidation nitrogen products are N2 and N2O, while NO and NO2 concentrations are below the detection limit under all considered conditions. N2O formation is favored by increasing stoichiometry, pressure and H2/NH3 ratio. The experimental results are simulated and interpreted in terms of a literature detailed chemical kinetic mechanism, which, in general, is able to describe quite well both the H2 and NH3 conversion profiles under the studied conditions.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Polycyclic aromatic hydrocarbons formed during the pyrolysis of dimethoxymethane (DMM). Comparison with other oxygenated additives

  • Viteri, Fausto
  • Alexandrino, Katiuska
  • Millera, Ángela
  • Bilbao, Rafael
  • Alzueta, María U.
The influence of the temperature (1075 – 1475 K) and inlet concentration of fuel (33,333 and 50,000 ppmv) on the formation of the 16 EPA-priority Polycyclic Aromatic Hydrocarbons (PAH) from the pyrolysis of dimethoxymethane (DMM) was analyzed. PAH were detected in different phases (gas phase, adsorbed on soot, and stuck on the reactor walls) and quantified by gas chromatography-mass spectrometry (GC–MS). Additionally, the toxicity of the PAH samples, expressed as B[a]P-eq, was analyzed in all experiments. A comparison with the results obtained from the pyrolysis of other oxygenated compounds was also performed and similar behaviors were observed. The main results showed that, at low temperatures, the highest concentrations of PAH were found in the gas phase, while at high temperatures were found on soot. For both inlet concentrations of DMM, the light PAH, such as naphthalene and acenaphthylene, were found in major concentrations, in all phases and temperatures. The heavy PAH, such as fluoranthene and pyrene, increased its concentration on soot at highest temperatures. The highest formation of soot was obtained at 1475 K and follows the trend: 2,5DMF < tert-butanol < 2MF < 2butanol < iso-butanol < 1-butanol < ethanol < DMC < DMM. The highest formation of PAH was at 1275 K with the tendency: tert-butanol < 2-butanol < 1-butanol < 2,5DMF < 2MF < iso-butanol < ethanol < DMC < DMM. The highest B[a]P-eq value was found in the pyrolysis of 2,5DMF, and the lowest in the pyrolysis of DMM.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

High-pressure conversion of ammonia additivated with dimethyl ether in a flow reactor

  • García-Ruiz, Pedro
  • Ferrando, Pablo
  • Abián, María
  • Alzueta, María U.
The oxidation of ammonia (NH3) mixed with dimethyl ether (DME) was investigated from experimental and modeling points of view using a quartz flow reactor with argon as bath gas from 350 K to 1225 K, for two different DME/NH3 ratios (0.05 and 0.3), three oxygen excess ratios (λ = 0.7, 1 and 3) and various pressures (1, 10, 20 and 40 bar). The effect of pressure, oxygen stoichiometry, temperature, and DME/NH3 ratio has been analyzed on DME, NH3, NO, NO2, N2O, N2, O2, H2, HCN, CH4, CO, and CO2 concentrations. The present study indicates that oxygen availability, DME/NH3 ratio, and pressure are important variables that shift NH3 and DME conversion to lower temperatures as their values increase. Under certain conditions, the pressure effect can avoid NO and HCN production, which would represent a benefit for pressure applications. The main products of ammonia/dimethyl ether oxidation are N2, N2O, CO, and CO2, and under certain conditions, NO, H2, CH4, and HCN are also produced. NO2 is always detected below 5 ppm for all the conditions considered. The N2O formation is favored by increasing the O2 stoichiometry, pressure, and/or DME/NH3 ratio. The experimental results are interpreted and discussed in terms of an updated detailed chemical kinetic mechanism, which captures, with a general good agreement, the main trends of NH3 and DME conversion under the considered conditions. Despite this, some calculated species present discrepancies with the experimental results. The main challenge is the consideration of the C-N interactions that can be present in the combustion of DME/NH3 mixtures.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

High-Pressure Oxidation of Ammonia Mixed with Dimethoxymethane

  • Alexandrino, Katiuska
  • Andrés, Álvaro
  • Callejas, Alicia
  • Alzueta, María U.
The oxidation of ammonia-dimethoxymethane (NH3-DMM) mixtures at high pressure was analyzed from both experimental and kinetic modeling points of view. Experiments were performed using a laboratory tubular flow reactor installation and were conducted at 10, 20, and 40 bar under fuel-rich (λ = 0.7), stoichiometric (λ = 1), and fuel-lean (λ = 3) conditions and temperatures ranging from 650 to 1250 K. The inlet DMM concentration was varied (100 and 200 ppm), keeping the concentration of ammonia constant at 1000 ppm. The data were interpreted in terms of a detailed chemical kinetic model. Despite some discrepancy between the model predictions and measurements, the model accurately followed the experimental trends, highlighting its ability to describe the oxidation of the NH3-DMM mixture. The experimental and predicted results suggested that the conversion of both ammonia and DMM was favored by increased pressure and higher inlet concentrations of O2 and DMM. Under the conditions of the present work, the dominant path for ammonia and DMM conversion leads to N2/N2O and CO/CO2 in any case. Concentrations of NO and NO2 were below the detection limit in all the experimental conditions studied, which imply a benefit in the reduction of NOx emissions during the combustion of pure ammonia. DMM enhanced the ammonia reactivity, although its presence leads to the formation of CO2 not only by the common CO + OH reaction but also through the interaction of N2O with CO.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Pyrolysis of ethylene – ammonia mixture: Formation of soot, gases and PAH

  • Viteri, Fausto
  • Soler, María
  • Starace, Paola
  • Abián, María
  • Alzueta, María U.
The effect of inlet concentration of NH3 (0, 30000, 60000, and 100000 ppm) and temperature (1275, 1375, and 1475 K) on the formation of soot, gases and polycyclic aromatic hydrocarbons (PAH) from the pyrolysis of C2H4/NH3 mixtures with constant concentration of C2H4 (30000 ppm) was analyzed. Light gases were quantified through gas chromatography, while soot was collected in a fiber filter, at the reactor outlet, and the particle diameter was analyzed. The PAH were analyzed through gas chromatograph coupled to mass spectrometer by considering the 16 PAH reported by Environmental Protection Agency (EPA) as priority pollutants. The main results show that the higher the presence of NH3 in the NH3/C2H4 mixture, the lower the soot formation. This decrease of soot is accompanied by an increase of HCN and a decrease in C2H2, indicating that the carbon has been removed from the typical soot reaction pathways. In all conditions tested, PAH formed follow the typical trend observed in earlier works with respect to temperature, i.e. as the temperature increases, the formation of PAH decreases. At 1275 K, the presence of high NH₃ levels increases PAH concentrations, likely due to suppression of soot formation routes, which prevents PAH consumption and allows aromatic intermediates to accumulate rather than proceed to particle growth. The increase in NH3 concentrations at the inlet reduces the toxicity expressed as benzo[a]pyrene equivalent concentration (B[a]P-eq), under all conditions studied. Analysis of the particle distribution diameter reveals that the NH3 presence reduces diameter variations and predominantly results in smaller soot particles.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Oxidation of diethyl ether/ammonia mixtures in a flow reactor at different pressures

  • García-Ruiz, P.
  • García, M.
  • Abián, M.
  • Alzueta, M.U.
Ammonia (NH3) in their mixtures with diethyl ether (DEE) represents a strategy to reduce CO2 emissions and overcome the limitations of NH3 combustion, even for a small addition of DEE (5 %). DEE is considered a potential substitute for fossil fuels when obtained from bioethanol. The present work performs an experimental and kinetic analysis of DEE/NH3 oxidation and the formation of combustion products at different pressures (1–40 bar), in the 290 K–1180 K temperature range using a quartz tubular flow reactor by analyzing the effects of the main variables (pressure, temperature, oxygen excess ratio, and DEE/NH3 ratio) using argon as a bath gas. The results indicate that either increasing pressure, DEE/NH3 ratio, or oxygen availability results in a shift of NH3 and DEE conversion to lower temperatures. DEE and NH3 show a negative temperature coefficient (NTC) phenomenon at low temperatures, influenced by pressure, oxygen excess, and the DEE/NH3 ratio. The pressure effect is particularly significant in the low pressures studied. The main nitrogen products are N2 and N2O. HCN is only produced under atmospheric pressure, while NO2 and NO concentrations are below the detection limit under all considered conditions. N2O formation is favored by increasing stoichiometry, pressure, and DEE/NH3 ratio. Apart from CO and CO2, CH4, CH3OH, C2H4, and CH3CHO have been found as produced carbon pecies. The experimental results are interpreted in terms of a chemical kinetic mechanism for DEE/NH3 mixtures, which can describe the main trend of NH3 and DEE conversion under the studied conditions.