Pasar al contenido principal

ESTUDIO DE LA OXIDACION DE NH3 Y SUS MEZCLAS CON CH4/H2, EVALUANDO EL IMPACTO EN LAS EMISIONES CONTAMINANTES

PRE2019-090162

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i
Subprograma Subprograma Estatal de Formación
Convocatoria Contratos Predoctorales
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE ZARAGOZA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

High pressure ammonia oxidation in a flow reactor

  • García-Ruiz, P.
  • Uruén, M.
  • Abián, M.
  • Alzueta, M.U.
The present work deals with an experimental and modeling analysis of ammonia oxidation at high pressure (up to 40 bar), in the 600–1275 K temperature range using a quartz tubular reactor and argon as diluent. The impact of temperature, pressure, oxygen stoichiometry and presence of NO has been analyzed on the concentrations of NH3 and N2 obtained as main products of ammonia oxidation. The main results obtained indicate that increasing either pressure or stoichiometry results in a shift of NH3 conversion to lower temperatures. The effect of pressure is particularly significant in the low range of pressures studied. The main product of ammonia oxidation is N2, while NO, NO2 and N2O concentrations are below the detection limit for all the conditions considered. The experimental results are simulated and interpreted in terms of a literature detailed chemical kinetic mechanism, which, in general, predicts satisfactorily the experimental results.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Experimental and Modeling High-Pressure Study of Ammonia–Methane Oxidation in a Flow Reactor

  • García-Ruiz, Pedro
  • Salas, Iris
  • Casanova, Eva
  • Bilbao, Rafael
  • Alzueta, María U.
The present work deals with an experimental and modeling analysis of the oxidation of ammonia–methane mixtures at high pressure (up to 40 bar) in the 550–1250 K temperature range using a quartz tubular reactor and argon as a diluent. The impact of temperature, pressure, oxygen stoichiometry, and CH4/NH3 ratio has been analyzed on the concentrations of NH3, NO2, N2O, NO, N2, HCN, CH4, CO, and CO2 obtained as main products of the ammonia–methane mixture oxidation. The main results obtained indicate that increasing either the pressure, CH4/NH3 ratio, or stoichiometry results in a shift of NH3 and CH4 conversion to lower temperatures. The effect of pressure is particularly significant in the low range of pressures studied. The main products of ammonia oxidation are N2, NO, and N2O while NO2 concentrations are below the detection limit for all of the conditions considered. The N2O formation is favored by increasing the CH4/NH3 ratio and stoichiometry. The experimental results are simulated and interpreted in terms of an updated detailed chemical kinetic mechanism, which, in general, is able to describe well the conversion of both NH3 and CH4 under almost all of the studied conditions. Nevertheless, some discrepancies are found between the experimental results and model calculations.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

High-pressure study of the conversion of NH3/H2 mixtures in a flow reactor

  • García-Ruiz, Pedro
  • Castejón, Daniel
  • Abengochea, Miguel
  • Bilbao, Rafael
  • Alzueta, María U.
Carbon free fuels such as hydrogen (H2) and ammonia (NH3) will probably play a fundamental role owing to their potential for clean combustion without CO2 emissions. To contribute to the knowledge and development of technologies based on carbon free combustion, the present work deals with an experimental and kinetic analysis of ammonia oxidation in its mixtures with hydrogen at high pressure (up to 40 bar), in the 250–1250 K temperature range using a quartz tubular reactor and argon as bath gas. The impact of temperature, pressure, stoichiometry and H2/NH3 ratio on the concentrations of NH3, NO, NO2, N2O, and N2 obtained as main products of oxidation has been analyzed. The main results indicate that either increasing pressure, H2/NH3 ratio or oxygen availability results in a shift of NH3 and H2 conversion to lower temperatures. The NH3 and H2 consumptions are promoted by the reactions that produce NH2, H, OH, O, HO2 and HNO species and inhibited by reactions that form H2O, NH3, NO, H2NO and O2 species. The pressure effect is particularly significant in the low range of pressures studied. The main ammonia oxidation nitrogen products are N2 and N2O, while NO and NO2 concentrations are below the detection limit under all considered conditions. N2O formation is favored by increasing stoichiometry, pressure and H2/NH3 ratio. The experimental results are simulated and interpreted in terms of a literature detailed chemical kinetic mechanism, which, in general, is able to describe quite well both the H2 and NH3 conversion profiles under the studied conditions.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

High-pressure conversion of ammonia additivated with dimethyl ether in a flow reactor

  • García-Ruiz, Pedro
  • Ferrando, Pablo
  • Abián, María
  • Alzueta, María U.
The oxidation of ammonia (NH3) mixed with dimethyl ether (DME) was investigated from experimental and modeling points of view using a quartz flow reactor with argon as bath gas from 350 K to 1225 K, for two different DME/NH3 ratios (0.05 and 0.3), three oxygen excess ratios (λ = 0.7, 1 and 3) and various pressures (1, 10, 20 and 40 bar). The effect of pressure, oxygen stoichiometry, temperature, and DME/NH3 ratio has been analyzed on DME, NH3, NO, NO2, N2O, N2, O2, H2, HCN, CH4, CO, and CO2 concentrations. The present study indicates that oxygen availability, DME/NH3 ratio, and pressure are important variables that shift NH3 and DME conversion to lower temperatures as their values increase. Under certain conditions, the pressure effect can avoid NO and HCN production, which would represent a benefit for pressure applications. The main products of ammonia/dimethyl ether oxidation are N2, N2O, CO, and CO2, and under certain conditions, NO, H2, CH4, and HCN are also produced. NO2 is always detected below 5 ppm for all the conditions considered. The N2O formation is favored by increasing the O2 stoichiometry, pressure, and/or DME/NH3 ratio. The experimental results are interpreted and discussed in terms of an updated detailed chemical kinetic mechanism, which captures, with a general good agreement, the main trends of NH3 and DME conversion under the considered conditions. Despite this, some calculated species present discrepancies with the experimental results. The main challenge is the consideration of the C-N interactions that can be present in the combustion of DME/NH3 mixtures.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Oxidation of diethyl ether/ammonia mixtures in a flow reactor at different pressures

  • García-Ruiz, P.
  • García, M.
  • Abián, M.
  • Alzueta, M.U.
Ammonia (NH3) in their mixtures with diethyl ether (DEE) represents a strategy to reduce CO2 emissions and overcome the limitations of NH3 combustion, even for a small addition of DEE (5 %). DEE is considered a potential substitute for fossil fuels when obtained from bioethanol. The present work performs an experimental and kinetic analysis of DEE/NH3 oxidation and the formation of combustion products at different pressures (1–40 bar), in the 290 K–1180 K temperature range using a quartz tubular flow reactor by analyzing the effects of the main variables (pressure, temperature, oxygen excess ratio, and DEE/NH3 ratio) using argon as a bath gas. The results indicate that either increasing pressure, DEE/NH3 ratio, or oxygen availability results in a shift of NH3 and DEE conversion to lower temperatures. DEE and NH3 show a negative temperature coefficient (NTC) phenomenon at low temperatures, influenced by pressure, oxygen excess, and the DEE/NH3 ratio. The pressure effect is particularly significant in the low pressures studied. The main nitrogen products are N2 and N2O. HCN is only produced under atmospheric pressure, while NO2 and NO concentrations are below the detection limit under all considered conditions. N2O formation is favored by increasing stoichiometry, pressure, and DEE/NH3 ratio. Apart from CO and CO2, CH4, CH3OH, C2H4, and CH3CHO have been found as produced carbon pecies. The experimental results are interpreted in terms of a chemical kinetic mechanism for DEE/NH3 mixtures, which can describe the main trend of NH3 and DEE conversion under the studied conditions.