Pasar al contenido principal

OBTENCION DE BIOFILMS CON PROPIEDADES BARRERA A PARTIR DE RECURSOS RENOVABLES

CTQ2016-77936-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2016
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 1 página(s)

Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Improving filmogenic and barrier properties of nanocellulose films by addition of biodegradable plasticizers

  • Fernández Santos, Julia
  • Valls Vidal, Cristina
  • Cusola Aumedes, Oriol
  • Roncero Vivero, María Blanca
Cellulose nanocrystals (CNCs) were mixed with various additives to obtain films with good barrier and mechanical properties as replacements for petroleum-based plastics. The influence of different doses of additives including sorbitol (Sor), glycerol (Gly), maltitol (Mal), xylitol (Xyl), mannitol (Man), gellan gum (Gg), and ethylene glycol (Eg) on the resulting films was examined. Both the type of additive and its amount were found to affect film morphology, barrier, optical and mechanical properties. Most of the additives showed good results at low doses. All additives, except Eg and Man, improved film elongation; also, they increased tensile strength and decreased air and water permeance. The films containing Sor, Xyl, and Mal exhibited the highest barrier properties, providing films with totally resistance to oxygen under 60% of relative humidity conditions. Interestingly, those films containing additives were more easily biodegraded than the control film, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Enhanced fully cellulose based forward and reverse blood typing assay

  • Casals Terré, Jasmina
  • Farré Lladós, Josep
  • López Martínez, Joan Antoni
  • Vidal Lluciá, Teresa
  • Roncero Vivero, María Blanca
This study presents an enhanced paper-based analytical device (PAD) for forward and reverse group blood typing. The proposed PAD uses a novel methodology, which provides highly reliable results on a fully cellulose based device. The PAD was printed on different cellulose substrates. These substrates were made of different cellulose fibers (sisal and eucalyptus), different grammages, refining steps, and wet additive content. Best parameters were chosen to achieve high reliability on both forward and reverse blood typing. The substrates were patterned with five hydrophilic channels and two hydrophobic areas. For reverse blood typing, the hemoagglutination reaction took place on the hydrophobic surface of the paper before being transferred to the paper web, where together with the forward blood typing tests were all washed with saline solution to read the results by elution. This device allows direct read-out of results; the stains show were agglutination happens. Different blood types were in full agreement between the reverse and forward method and in agreement with traditional methods. The time and simplicity of this methodology confirmed its utility, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Sustainability in e-commerce packaging: a review

  • Escursell Martínez, Silvia
  • Llorach Massana, Pere
  • Roncero Vivero, María Blanca
Online purchasing, and hence e-commerce packaging production and use, have grown steadily in recent years, and so has their environmental impact as a result. This paper reviews the evolution of packaging over the last century through a compilation of scientific literature on e-commerce packaging focusing on its environmental side. The primary aims were to identify research gaps in e-commerce packaging and to propose new research lines aimed at reducing its environmental impact. A systematic search of abstracts was conducted to identify articles dealing with sustainability in e-commerce packaging in order to better understand changes in materials and formats, identify problems such as oversizing and allow prospective readers to become acquainted with the latest innovations in materials, sustainability and logistics. Based on existing research, packaging materials and technology evolved rapidly until the 1990s. Later, however, it has become increasingly difficult to further reduce their cost and environmental impact. Also, some packaging products continue to be made from non-renewable materials and thus restrict growth of e-commerce. Further research is needed with a view to producing new packages from renewable sources such as cellulose-containing materials, which are widely available in nature, or from recycled cellulose-based materials such as cartonboard. Improving distribution processes with new, more effective tools could additionally help alleviate the environmental impact of packaging. Similarly, new production processes such as additive manufacturing and 3D printing might help optimize package volume and shape, thereby facilitating more sustainable production through, for example, reduced CO2 emissions. Currently available technology can be useful to rethink the whole e-commerce packaging paradigm, which has changed very little over the past few decades, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Assessment of the potential of enzymes to produce dissolving pulps

  • Valls Vidal, Cristina
  • Quintana, Elisabet
  • Vidal Lluciá, Teresa
  • Roncero Vivero, María Blanca
In this work, a totally chlorine free (TCF) sequence including a laccase-mediator system was developed in a softwood sulfite pulp. Then, purification was carried out employing strong alkaline extractions and hydrolytic enzymes (endoglucanases). The combination of both procedures led to reduce the amount of hemicelluloses and increase the solubility behaviour of cellulose, desired aspects for its final application. Finally, laccase-TEMPO system was used to evaluate the improvement of strength properties through oxidative modification of cellulose, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Elucidating the chemical nature of laccase-modified alkyl gallates

  • Cusola Aumedes, Oriol
  • Valls Vidal, Cristina
  • Vidal Lluciá, Teresa
  • Roncero Vivero, María Blanca
In the present work we investigated the chemical changes undergone by enzyme-oxidized lauryl gallate (LG, dodecyl 3,4,5,-trihydroxybenzoate) by using Fourier transform infrared (FTIR) spectroscopy, and an oxidation mechanism is proposed from the results. The FTIR analysis revealed that enzyme-modified gallates consist mainly on open-ring acid products, while the hydrocarbon chains remained unaltered after oxidation, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Packaging y sostenibilidad en el e-commerce

  • Escursell Martínez, Silvia
  • Llorach Massana, Pere
  • Roncero Vivero, María Blanca
El e-commerce está generando un incremento exponencial de ingresos para las empresas, pero también está provocando un impacto ambiental importante, es decir se generan más residuos y una elevada huella de carbono como consecuencia de todos los trayectos. Este artículo presenta un breve análisis de la problemática, además de entender la evolución del packaging, desde finales del s. XIX, conocido como la época moderna del packaging, y la evolución de los materiales hasta la actualidad. El objetivo es saber escoger los materiales más adecuados, entender y reflexionar sobre la evolución de la logística y la tecnología, de manera que la producción y la forma del packaging permitan una alternativa a la existente. El propósito es aportar soluciones más adecuadas a este actual servicio, sin perder sus funciones principales como el de proteger y comunicar. Todo ello, debe pensarse desde la visión del diseño y la sostenibilidad pensando en la economía circular y las 5R
Recercat. Dipósit de la Recerca de Catalunya
Publicación

Packaging y sostenibilidad en el e-Commerce

  • Escursell Martínez, Silvia
  • Roncero Vivero, María Blanca
  • Llorach-Massana, Pere
El e-commerce está generando un incremento exponencial de ingresos para las empresas, pero también está provocando un impacto ambiental importante, es decir se generan más residuos y una elevada huella de carbono como consecuencia de todos los trayectos. Este artículo presenta un breve análisis de la problemática, además de entender la evolución del packaging, desde finales del s. XIX, conocido como la época moderna del packaging, y la evolución de los materiales hasta la actualidad. El objetivo es saber escoger los materiales más adecuados, entender y reflexionar sobre la evolución de la logística y la tecnología, de manera que la producción y la forma del packaging permitan una alternativa a la existente. El propósito es aportar soluciones más adecuadas a este actual servicio, sin perder sus funciones principales como el de proteger y comunicar. Todo ello, debe pensarse desde la visión del diseño y la sostenibilidad pensando en la economía circular y las 5R, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Facilitating the selection of raw materials: evaluation of the effects of TCF and ECF bleaching sequences on different wood and non-wood pulps

  • Beltramino, Facundo
  • Roncero Vivero, María Blanca
  • Vidal Lluciá, Teresa
  • Valls Vidal, Cristina
Properties of cellulosic raw materials are known to vary widely among different sources. The interest in the usage of non-conventional fibers makes necessary a better knowledge of the peculiarities of each source and their behavior under different bleaching processes. ECF and TCF bleached pulps (ISO brightness= 82%) from eucalyptus, flax and sisal as well as cotton linters were analyzed. Eucalyptus showed the highest zero-span tensile strength (1.1-1.2 N.m/g), higher than that of sisal (0.85-0.95 N.m/g) and flax (0.7-0.8 N.m/g) which were also found to be linearly correlated to their viscosity regardless of the cellulose source. Sisal and eucalyptus showed the largest hemicelluloses content (˜13-16 %) while cotton linters appeared as a high-cellulose content (97.7 %)source for high-quality fibers. ECF and TCF bleaching processes produced different effects on fibers, as the latter showed a slightly lower quality than the former, difference that may not be significant if the great environmental benefit of TCF bleaching is considered. Finally, fiber surface was examined using SEM microscopy for a more complete assessment of raw materials, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Elucidating the chemical nature of laccase-modified alkyl gallates

  • Cusola Aumedes, Oriol
  • Valls Vidal, Cristina
  • Vidal Lluciá, Teresa
  • Roncero Vivero, María Blanca
In the first part of the present work, relevant findings concerning the laccase (Lacc) activation of alkyl gallates, and its implementation in developing hydrophobic properties on cellulose-based substrates are reported. Surface state energy by water contact angle (CA), absorption tests, and Cobb60 measurements were used to assess the hydrophobic behavior of treated substrates. SEM images of paper samples treated with functionalization solutions (FS) revealed the presence of lauryl gallate (LG, dodecyl 3,4,5,-trihydroxybenzoate) particles attached to fiber surfaces. Secondly, the chemical structure of the enzyme-oxidized LG and several gallates of variable chain length was elucidated by using Fourier transform infrared (FTIR) spectroscopy, and a plausible oxidation mechanism was developed. Based on them, the hydrocarbon chain of LG remains unaltered after enzyme oxidation, while the aromatic ring is significantly altered to form acidic adducts undergoing strong hydrogen bonding. Possible routes for the grafting of enzyme-modified LG to cellulose are proposed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A passive portable microfluidic blood-plasma separator for simultaneous determination of direct and indirect ABO/Rh blood typing

  • Karimi, Shadi
  • Mehrdel, Pouya
  • Farré Lladós, Josep
  • Casals Terré, Jasmina
The blood typing test is mandatory in any transfusion, organ transplant, and pregnancy situation. There is a lack of point-of-care (POC) blood typing that could perform both direct and indirect methods using a single droplet of whole blood. This study presents a new methodology combining a passive microfluidic blood–plasma separator (BPS) and a blood typing detector for the very first time, leading to a stand-alone microchip which is capable of determining the blood group from both direct and indirect methods simultaneously. The proposed design separates blood cells from plasma by applying hydrodynamic forces imposed on them, which overcomes the clogging issue and consequently maximizes the volume of the extracted plasma. An axial migration effect across the main channel is responsible for collecting the plasma in plasma collector channels. The BPS novel design approached 12% yield of plasma with 100% purity in approximately 10 minutes. The portable BPS was designed and fabricated to perform ABO/Rh blood tests based on the detection of agglutination in both antigens of RBCs (direct) and antibodies of plasma (indirect). The differences between agglutinated and non-agglutinated samples were distinguishable by the naked eye and also validated by particle analysis of microscopic pictures. The results of this passive BPS in ABO/Rh blood grouping verified the quality and quantity of the extracted plasma in practical applications, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Ionic liquids-assisted bioconversion of lignocellulosic biomass for the development of value-added products

  • Amini, Elahe
  • Valls Vidal, Cristina
  • Roncero Vivero, María Blanca
Lignocellulosic biomass is the most abundant renewable and inexpensive source that can be used to produce biofuels and bioproducts. One of the major limitations of biomass valorisation is its recalcitrance to an efficient conversion due to its lignin-carbohydrate complex structure. This limitation causes technical and economic challenges for the conversion of lignocellulosic biomass into value-added products. Certain ionic liquids (ILs) have been proven to be effective solvents to deconstruct lignocellulosic biomass. The concerns over hazards of conventional volatile organic solvents can be overcome by ILs due to their unique and ‘green’ characteristics. Advancements in ionic liquid pretreatment may help to increase the productivity of lignocellulosic-based bioconversion. This review describes, at first, the potential of the most prominent types of ionic liquids and the impact of the cation/anion combination on their physiochemical properties. It then discusses the different approaches, which are followed for the dissolution and fractionation of three major components of lignocellulosic biomass using ionic liquids and categorize them based on the target application. Additionally, the optimal process parameters for ionic liquid pretreatment toward optimisation of the dissolution yield are mentioned. It finally highlights the challenges of using ionic liquid during its commercial use in biomass pretreatment and processing, specially the synthesis cost as the economic barrier. It is hoped that the highlights in future prospect and challenges of adopting IL in these processes will stimulate a wide range of research studies and collaborations, leading to significant industrial progress in this area, Special thanks are also due to the Serra Húnter Fellow to Cristina Valls and to the FPI-UPC awarded to Elahe Amini, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A straightforward bioprocess for a cleaner paper decolorization

  • Valls Vidal, Cristina
  • Cusola Aumedes, Oriol
  • Vidal Lluciá, Teresa
  • Torres López, Antonio Luis
  • Roncero Vivero, María Blanca
A new biotechnological sequence for decolorizing red and black colored paper was developed to reduce the environmental impact of the chemicals used in paper recycling processes. Commercially available low-redox potential laccase from Myceliophthora thermophila, which operates optimally under alkaline conditions, was used in combination with natural mediators to make the process even greener. Based on the optical properties of the resulting decolorized paper, red and black dyes were efficiently removed by all laccase–mediator systems. The best results were provided by the laccase–methyl syringate combination, followed by the laccase–acetosyringone system and the laccase–syringaldehyde system. The decolorization rate for red paper achieved with the laccase–methyl syringate treatment exceeded that obtained with ozone. Red was removed by about 98% by combining two enzymatic stages and hydrogen peroxide stage, and black by 65%, without altering the physical properties of the colored paper in either case. A sequence combining oxidative and reductive (formamidine sulfinic acid) chemical treatments led to comparable optical and physical properties for the two types of paper. The effects of Myceliophthora thermophila laccase and methyl syringate were similar to those of high-redox potential laccase from Trametes villosa combined with either methyl syringate or the synthetic mediator violuric acid, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Assessing the enzymatic effects of cellulases and LPMO in improving mechanical fibrillation of cotton linters

  • Valls Vidal, Cristina
  • Pastor Blasco, Francisco Ignacio Javier
  • Roncero Vivero, María Blanca
  • Vidal Lluciá, Teresa
  • Diaz Lucea, M. Pilar
  • Martinez Soler, Josefina
  • Valenzuela, Susana V.
Background: The increasing interest in replacing petroleum-based products by more sustainable materials in the packaging sector gives relevance to cellulose as a biodegradable natural resource. Moreover, its properties can be modified physically, chemically or biotechnologically in order to obtain new bioproducts. Refined cotton linters with high cellulose content were treated with hydrolytic (cellulases) and oxidative (LPMO and Laccase_Tempo) enzymes to evaluate their effect on fibre properties and in improving mechanical fibrillation. Results: Cellulases released cellooligosaccharides, reducing fibre length and partially degrading cellulose. They also improved mechanical fibrillation yielding up to 18% of nanofibrillated cellulose (NFC). LPMO introduced a slight amount of COOH groups in cellulose fibres, releasing cellobionic acid to the effluents. The action of cellulases was improved after LPMO treatment; however, the COOH groups created disappeared from fibres. After mechanical fibrillation of LPMO–cellulase-treated cotton linters a 23% yield of NFC was obtained. Laccase_Tempo treatment also introduced COOH groups in cellulose fibres from cotton, yielding 10% of NFC. Degree of polymerization was reduced by Laccase_Tempo, while LPMO treatment did not significantly affect it but produced a higher reduction in fibre length. The combined treatment with LPMO and cellulase provided films with higher transparency (86%), crystallinity (92%), smoothness and improved barrier properties to air and water than films casted from non-treated linters and from commercial NFC. Conclusions: The combined enzymatic treatment with LPMO and cellulases boosted mechanical fibrillation of cotton linters, improving the NFC production and providing bioproducts with high transparency and high barrier properties, Postprint (published version)