Pasar al contenido principal

DESARROLLO DE MICRODISPOSITIVOS CELULOSICOS DE BAJO IMPACTO AMBIENTAL PARA EL BIODIAGNOSTICO INMEDIATO

CTQ2017-84966-C2-1-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Recent impact of microfluidics on skin models for perspiration simulation

  • Rabost Garcia, Genís|||0000-0002-6783-4400
  • Farré Lladós, Josep|||0000-0001-5909-0176
  • Casals Terré, Jasmina|||0000-0002-1368-3950
Skin models offer an in vitro alternative to human trials without their high costs, variability, and ethical issues. Perspiration models, in particular, have gained relevance lately due to the rise of sweat analysis and wearable technology. The predominant approach to replicate the key features of perspiration (sweat gland dimensions, sweat rates, and skin surface characteristics) is to use lasermachined membranes. Although they work effectively, they present some limitations at the time of replicating sweat gland dimensions. Alternative strategies in terms of fabrication and materials have also showed similar challenges. Additional research is necessary to implement a standardized, simple, and accurate model representing sweating for wearable sensors testing, This research was funded by the Agència de Gestió d’Ajuts Universitaris i Recerca (AGAUR), for the Industrial PhD grant number 2019 DI 18. This work was partially funded thanks to the Red Nacional de Microfluídica RED2018-102829-T and the Spanish Ministry of Economy and Competitivity, grant CTQ2017-84966-C2-1-R
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Sustainability in e-commerce packaging: a review

  • Escursell Martínez, Silvia|||0000-0002-7947-2275
  • Llorach Massana, Pere
  • Roncero Vivero, María Blanca|||0000-0002-2694-2368
Online purchasing, and hence e-commerce packaging production and use, have grown steadily in recent years, and so has their environmental impact as a result. This paper reviews the evolution of packaging over the last century through a compilation of scientific literature on e-commerce packaging focusing on its environmental side. The primary aims were to identify research gaps in e-commerce packaging and to propose new research lines aimed at reducing its environmental impact. A systematic search of abstracts was conducted to identify articles dealing with sustainability in e-commerce packaging in order to better understand changes in materials and formats, identify problems such as oversizing and allow prospective readers to become acquainted with the latest innovations in materials, sustainability and logistics. Based on existing research, packaging materials and technology evolved rapidly until the 1990s. Later, however, it has become increasingly difficult to further reduce their cost and environmental impact. Also, some packaging products continue to be made from non-renewable materials and thus restrict growth of e-commerce. Further research is needed with a view to producing new packages from renewable sources such as cellulose-containing materials, which are widely available in nature, or from recycled cellulose-based materials such as cartonboard. Improving distribution processes with new, more effective tools could additionally help alleviate the environmental impact of packaging. Similarly, new production processes such as additive manufacturing and 3D printing might help optimize package volume and shape, thereby facilitating more sustainable production through, for example, reduced CO2 emissions. Currently available technology can be useful to rethink the whole e-commerce packaging paradigm, which has changed very little over the past few decades
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Elucidating the chemical nature of laccase-modified alkyl gallates

  • Cusola Aumedes, Oriol|||0000-0002-1407-8285
  • Valls Vidal, Cristina|||0000-0003-2307-1779
  • Vidal Lluciá, Teresa|||0000-0001-6269-4114
  • Roncero Vivero, María Blanca|||0000-0002-2694-2368
In the first part of the present work, relevant findings concerning the laccase (Lacc) activation of alkyl gallates, and its implementation in developing hydrophobic properties on cellulose-based substrates are reported. Surface state energy by water contact angle (CA), absorption tests, and Cobb60 measurements were used to assess the hydrophobic behavior of treated substrates. SEM images of paper samples treated with functionalization solutions (FS) revealed the presence of lauryl gallate (LG, dodecyl 3,4,5,-trihydroxybenzoate) particles attached to fiber surfaces. Secondly, the chemical structure of the enzyme-oxidized LG and several gallates of variable chain length was elucidated by using Fourier transform infrared (FTIR) spectroscopy, and a plausible oxidation mechanism was developed. Based on them, the hydrocarbon chain of LG remains unaltered after enzyme oxidation, while the aromatic ring is significantly altered to form acidic adducts undergoing strong hydrogen bonding. Possible routes for the grafting of enzyme-modified LG to cellulose are proposed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Ionic liquids-assisted bioconversion of lignocellulosic biomass for the development of value-added products

  • Amini, Elahe|||0000-0003-1524-0907
  • Valls Vidal, Cristina|||0000-0003-2307-1779
  • Roncero Vivero, María Blanca|||0000-0002-2694-2368
Lignocellulosic biomass is the most abundant renewable and inexpensive source that can be used to produce biofuels and bioproducts. One of the major limitations of biomass valorisation is its recalcitrance to an efficient conversion due to its lignin-carbohydrate complex structure. This limitation causes technical and economic challenges for the conversion of lignocellulosic biomass into value-added products. Certain ionic liquids (ILs) have been proven to be effective solvents to deconstruct lignocellulosic biomass. The concerns over hazards of conventional volatile organic solvents can be overcome by ILs due to their unique and ‘green’ characteristics. Advancements in ionic liquid pretreatment may help to increase the productivity of lignocellulosic-based bioconversion. This review describes, at first, the potential of the most prominent types of ionic liquids and the impact of the cation/anion combination on their physiochemical properties. It then discusses the different approaches, which are followed for the dissolution and fractionation of three major components of lignocellulosic biomass using ionic liquids and categorize them based on the target application. Additionally, the optimal process parameters for ionic liquid pretreatment toward optimisation of the dissolution yield are mentioned. It finally highlights the challenges of using ionic liquid during its commercial use in biomass pretreatment and processing, specially the synthesis cost as the economic barrier. It is hoped that the highlights in future prospect and challenges of adopting IL in these processes will stimulate a wide range of research studies and collaborations, leading to significant industrial progress in this area, Special thanks are also due to the Serra Húnter Fellow to Cristina Valls and to the FPI-UPC awarded to Elahe Amini
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Improving filmogenic and barrier properties of nanocellulose films by addition of biodegradable plasticizers

  • Fernández Santos, Julia|||0000-0002-9105-9117
  • Valls Vidal, Cristina|||0000-0003-2307-1779
  • Cusola Aumedes, Oriol|||0000-0002-1407-8285
  • Roncero Vivero, María Blanca|||0000-0002-2694-2368
Cellulose nanocrystals (CNCs) were mixed with various additives to obtain films with good barrier and mechanical properties as replacements for petroleum-based plastics. The influence of different doses of additives including sorbitol (Sor), glycerol (Gly), maltitol (Mal), xylitol (Xyl), mannitol (Man), gellan gum (Gg), and ethylene glycol (Eg) on the resulting films was examined. Both the type of additive and its amount were found to affect film morphology, barrier, optical and mechanical properties. Most of the additives showed good results at low doses. All additives, except Eg and Man, improved film elongation; also, they increased tensile strength and decreased air and water permeance. The films containing Sor, Xyl, and Mal exhibited the highest barrier properties, providing films with totally resistance to oxygen under 60% of relative humidity conditions. Interestingly, those films containing additives were more easily biodegraded than the control film
UPCommons. Portal del coneixement obert de la UPC
Publicación Capítulo o parte de un libro (BookPart)

Packaging y sostenibilidad en el e-Commerce

  • Escursell Martínez, Silvia|||0000-0002-7947-2275
  • Roncero Vivero, María Blanca|||0000-0002-2694-2368
  • Llorach-Massana, Pere
El e-commerce está generando un incremento exponencial de ingresos para las empresas, pero también está provocando un impacto ambiental importante, es decir se generan más residuos y una elevada huella de carbono como consecuencia de todos los trayectos. Este artículo presenta un breve análisis de la problemática, además de entender la evolución del packaging, desde finales del s. XIX, conocido como la época moderna del packaging, y la evolución de los materiales hasta la actualidad. El objetivo es saber escoger los materiales más adecuados, entender y reflexionar sobre la evolución de la logística y la tecnología, de manera que la producción y la forma del packaging permitan una alternativa a la existente. El propósito es aportar soluciones más adecuadas a este actual servicio, sin perder sus funciones principales como el de proteger y comunicar. Todo ello, debe pensarse desde la visión del diseño y la sostenibilidad pensando en la economía circular y las 5R
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Packaging y sostenibilidad en el e-commerce

  • Escursell Martínez, Silvia|||0000-0002-7947-2275
  • Llorach Massana, Pere
  • Roncero Vivero, María Blanca|||0000-0002-2694-2368
El e-commerce está generando un incremento exponencial de ingresos para las empresas, pero también está provocando un impacto ambiental importante, es decir se generan más residuos y una elevada huella de carbono como consecuencia de todos los trayectos. Este artículo presenta un breve análisis de la problemática, además de entender la evolución del packaging, desde finales del s. XIX, conocido como la época moderna del packaging, y la evolución de los materiales hasta la actualidad. El objetivo es saber escoger los materiales más adecuados, entender y reflexionar sobre la evolución de la logística y la tecnología, de manera que la producción y la forma del packaging permitan una alternativa a la existente. El propósito es aportar soluciones más adecuadas a este actual servicio, sin perder sus funciones principales como el de proteger y comunicar. Todo ello, debe pensarse desde la visión del diseño y la sostenibilidad pensando en la economía circular y las 5R
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Improving filmogenic and barrier properties of nanocellulose films by addition of biodegradable plasticizers

  • Fernández Santos, Julia
  • Valls Vidal, Cristina
  • Cusola Aumedes, Oriol
  • Roncero Vivero, María Blanca
Cellulose nanocrystals (CNCs) were mixed with various additives to obtain films with good barrier and mechanical properties as replacements for petroleum-based plastics. The influence of different doses of additives including sorbitol (Sor), glycerol (Gly), maltitol (Mal), xylitol (Xyl), mannitol (Man), gellan gum (Gg), and ethylene glycol (Eg) on the resulting films was examined. Both the type of additive and its amount were found to affect film morphology, barrier, optical and mechanical properties. Most of the additives showed good results at low doses. All additives, except Eg and Man, improved film elongation; also, they increased tensile strength and decreased air and water permeance. The films containing Sor, Xyl, and Mal exhibited the highest barrier properties, providing films with totally resistance to oxygen under 60% of relative humidity conditions. Interestingly, those films containing additives were more easily biodegraded than the control film, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Sustainability in e-commerce packaging: a review

  • Escursell Martínez, Silvia
  • Llorach Massana, Pere
  • Roncero Vivero, María Blanca
Online purchasing, and hence e-commerce packaging production and use, have grown steadily in recent years, and so has their environmental impact as a result. This paper reviews the evolution of packaging over the last century through a compilation of scientific literature on e-commerce packaging focusing on its environmental side. The primary aims were to identify research gaps in e-commerce packaging and to propose new research lines aimed at reducing its environmental impact. A systematic search of abstracts was conducted to identify articles dealing with sustainability in e-commerce packaging in order to better understand changes in materials and formats, identify problems such as oversizing and allow prospective readers to become acquainted with the latest innovations in materials, sustainability and logistics. Based on existing research, packaging materials and technology evolved rapidly until the 1990s. Later, however, it has become increasingly difficult to further reduce their cost and environmental impact. Also, some packaging products continue to be made from non-renewable materials and thus restrict growth of e-commerce. Further research is needed with a view to producing new packages from renewable sources such as cellulose-containing materials, which are widely available in nature, or from recycled cellulose-based materials such as cartonboard. Improving distribution processes with new, more effective tools could additionally help alleviate the environmental impact of packaging. Similarly, new production processes such as additive manufacturing and 3D printing might help optimize package volume and shape, thereby facilitating more sustainable production through, for example, reduced CO2 emissions. Currently available technology can be useful to rethink the whole e-commerce packaging paradigm, which has changed very little over the past few decades, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Packaging y sostenibilidad en el e-commerce

  • Escursell Martínez, Silvia
  • Llorach Massana, Pere
  • Roncero Vivero, María Blanca
El e-commerce está generando un incremento exponencial de ingresos para las empresas, pero también está provocando un impacto ambiental importante, es decir se generan más residuos y una elevada huella de carbono como consecuencia de todos los trayectos. Este artículo presenta un breve análisis de la problemática, además de entender la evolución del packaging, desde finales del s. XIX, conocido como la época moderna del packaging, y la evolución de los materiales hasta la actualidad. El objetivo es saber escoger los materiales más adecuados, entender y reflexionar sobre la evolución de la logística y la tecnología, de manera que la producción y la forma del packaging permitan una alternativa a la existente. El propósito es aportar soluciones más adecuadas a este actual servicio, sin perder sus funciones principales como el de proteger y comunicar. Todo ello, debe pensarse desde la visión del diseño y la sostenibilidad pensando en la economía circular y las 5R
Recercat. Dipósit de la Recerca de Catalunya
Publicación

Packaging y sostenibilidad en el e-Commerce

  • Escursell Martínez, Silvia
  • Roncero Vivero, María Blanca
  • Llorach-Massana, Pere
El e-commerce está generando un incremento exponencial de ingresos para las empresas, pero también está provocando un impacto ambiental importante, es decir se generan más residuos y una elevada huella de carbono como consecuencia de todos los trayectos. Este artículo presenta un breve análisis de la problemática, además de entender la evolución del packaging, desde finales del s. XIX, conocido como la época moderna del packaging, y la evolución de los materiales hasta la actualidad. El objetivo es saber escoger los materiales más adecuados, entender y reflexionar sobre la evolución de la logística y la tecnología, de manera que la producción y la forma del packaging permitan una alternativa a la existente. El propósito es aportar soluciones más adecuadas a este actual servicio, sin perder sus funciones principales como el de proteger y comunicar. Todo ello, debe pensarse desde la visión del diseño y la sostenibilidad pensando en la economía circular y las 5R, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Recent impact of microfluidics on skin models for perspiration simulation

  • Rabost Garcia, Genís
  • Farré Lladós, Josep
  • Casals Terré, Jasmina
Skin models offer an in vitro alternative to human trials without their high costs, variability, and ethical issues. Perspiration models, in particular, have gained relevance lately due to the rise of sweat analysis and wearable technology. The predominant approach to replicate the key features of perspiration (sweat gland dimensions, sweat rates, and skin surface characteristics) is to use lasermachined membranes. Although they work effectively, they present some limitations at the time of replicating sweat gland dimensions. Alternative strategies in terms of fabrication and materials have also showed similar challenges. Additional research is necessary to implement a standardized, simple, and accurate model representing sweating for wearable sensors testing, This research was funded by the Agència de Gestió d’Ajuts Universitaris i Recerca (AGAUR), for the Industrial PhD grant number 2019 DI 18. This work was partially funded thanks to the Red Nacional de Microfluídica RED2018-102829-T and the Spanish Ministry of Economy and Competitivity, grant CTQ2017-84966-C2-1-R, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Elucidating the chemical nature of laccase-modified alkyl gallates

  • Cusola Aumedes, Oriol
  • Valls Vidal, Cristina
  • Vidal Lluciá, Teresa
  • Roncero Vivero, María Blanca
In the first part of the present work, relevant findings concerning the laccase (Lacc) activation of alkyl gallates, and its implementation in developing hydrophobic properties on cellulose-based substrates are reported. Surface state energy by water contact angle (CA), absorption tests, and Cobb60 measurements were used to assess the hydrophobic behavior of treated substrates. SEM images of paper samples treated with functionalization solutions (FS) revealed the presence of lauryl gallate (LG, dodecyl 3,4,5,-trihydroxybenzoate) particles attached to fiber surfaces. Secondly, the chemical structure of the enzyme-oxidized LG and several gallates of variable chain length was elucidated by using Fourier transform infrared (FTIR) spectroscopy, and a plausible oxidation mechanism was developed. Based on them, the hydrocarbon chain of LG remains unaltered after enzyme oxidation, while the aromatic ring is significantly altered to form acidic adducts undergoing strong hydrogen bonding. Possible routes for the grafting of enzyme-modified LG to cellulose are proposed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Ionic liquids-assisted bioconversion of lignocellulosic biomass for the development of value-added products

  • Amini, Elahe
  • Valls Vidal, Cristina
  • Roncero Vivero, María Blanca
Lignocellulosic biomass is the most abundant renewable and inexpensive source that can be used to produce biofuels and bioproducts. One of the major limitations of biomass valorisation is its recalcitrance to an efficient conversion due to its lignin-carbohydrate complex structure. This limitation causes technical and economic challenges for the conversion of lignocellulosic biomass into value-added products. Certain ionic liquids (ILs) have been proven to be effective solvents to deconstruct lignocellulosic biomass. The concerns over hazards of conventional volatile organic solvents can be overcome by ILs due to their unique and ‘green’ characteristics. Advancements in ionic liquid pretreatment may help to increase the productivity of lignocellulosic-based bioconversion. This review describes, at first, the potential of the most prominent types of ionic liquids and the impact of the cation/anion combination on their physiochemical properties. It then discusses the different approaches, which are followed for the dissolution and fractionation of three major components of lignocellulosic biomass using ionic liquids and categorize them based on the target application. Additionally, the optimal process parameters for ionic liquid pretreatment toward optimisation of the dissolution yield are mentioned. It finally highlights the challenges of using ionic liquid during its commercial use in biomass pretreatment and processing, specially the synthesis cost as the economic barrier. It is hoped that the highlights in future prospect and challenges of adopting IL in these processes will stimulate a wide range of research studies and collaborations, leading to significant industrial progress in this area, Special thanks are also due to the Serra Húnter Fellow to Cristina Valls and to the FPI-UPC awarded to Elahe Amini, Postprint (published version)