Pasar al contenido principal

REACTORES DE CATALISIS QUIMICA Y BIOQUIMICA BASADOS EN NANOPARTICULAS DE OXIDOS METALICOS, ENZIMAS INMOVILIZADAS Y CLUSTERS ATOMICOS PARA LA ELIMINACION DE CONTAMINANTES

CTQ2016-79461-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2016
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDADE DE SANTIAGO DE COMPOSTELA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Optimization of the Extraction of Bioactive Compounds from Walnut (Juglans major 209 x Juglans regia) Leaves: Antioxidant Capacity and Phenolic Profile

  • Fernández Agulló, Adela
  • Castro Iglesias, Aída
  • Freire Leira, María Sonia
  • González Álvarez, Julia
This work studies the extraction of phenolic compounds from walnut leaves of the hybrid Juglans major 209 x Juglans regia based on extract antioxidant capacity. Once the solid/liquid ratio was selected (1/10 g/mL), by means of a Box-Benkhen experimental design, the influence of temperature (25–75 °C), time (30–120 min), and aqueous ethanol concentration (10–90%) on extraction yield and ferric reducing antioxidant power (FRAP), 2,2-diphenyl-1-picrylhydrazyl (DPPH), and 2,2’-azinobis-3-ethylbenzothiazoline-6-sulfonic acid (ABTS) antioxidant activities were analyzed. In all cases, the quadratic effect of % EtOH was the most significant, followed by the linear effect of temperature and, for most of the responses, the effect of time was almost negligible. Response surface analysis allowed to select the optimal extraction conditions: 75 °C, 120 min and 50% ethanol, which led to the following extract properties: extraction yield, 30.17%; FRAP, 1468 nmol ascorbic acid equivalents (AAE)/mg extract d.b.; DPPH, 1.318 mmol Trolox equivalents (TRE)/g extract d.b.; DPPH EC50, 0.11 mg/mL; ABTS, 1.256 mmol TRE/g extract (on dry basis) and ABTS EC50, 0.985 mg/mL. Quercetin 3-β-D-glucoside, neochlorogenic acid, and chlorogenic acid, in this order, were the main compounds identified in this extract by ultra-performance liquid chromatography coupled with electrospray ionization and time-of-flight mass spectrometry (UPLC/ESI-QTOF-MS), with various potential applications that support this valorization alternative for walnut leaves
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Development of a novel magnetic reactor based on nanostructured Fe3O4@PAA as heterogenous Fenton catalyst

  • Gamallo Mirón, María
  • Fernández Fernández, Lucía
  • Vázquez Vázquez, Carlos
  • Fondado Fondado, Alfonso
  • Mira Pérez, Jorge
  • Feijoo Costa, Gumersindo
  • Moreira Vilar, María Teresa
With the recent development of nanotechnology, magnetic nanoparticles (mNPs) have received increasing attention as potential heterogeneous Fenton catalysts in wastewater treatment applications, as an alternative to the conventional Fenton process using dissolved iron salts. Due to their superparamagnetic properties, Fe3O4 mNPs can be easily recovered and reused by applying a magnetic field. However, Fe3O4 mNPs have a marked tendency to form aggregates in water, leading to a decrease in their catalytic yield. To overcome these limitations, this work explores the catalytic activity of Fe3O4 coated with poly(acrylic acid) (Fe3O4@PAA) as stabilized Fenton heterogeneous nanocatalyst, in the degradation of C.I. Reactive Blue 19 (RB19). To maximize the catalytic potential of Fe3O4@PAA, an experimental design based on the Response Surface Methodology (RSM) has been developed to optimize the conditions of the Fenton process in terms of Fe3O4@PAA concentration (100–300 mg L−1) and H2O2 dose (100–400 mg L−1). Based on the results obtained, a novel sequential batch reactor (SBR) coupled to an external magnetic separation system has been developed, guaranteeing the complete retention of the mNPs in the system. This system allows the reuse of Fe3O4@PAA for at least 10 consecutive cycles, with a successful decolorization of RB19 after 4 h of treatment
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Formulation of Laccase Nanobiocatalysts Based on Ionic and Covalent Interactions for the Enhanced Oxidation of Phenolic Compounds

  • Moreira Vilar, María Teresa
  • Moldes Diz, Yolanda
  • Feijoo Moreira, Sara
  • Eibes González, Gemma María
  • Lema Rodicio, Juan Manuel
  • Feijoo Costa, Gumersindo
Oxidative biocatalysis by laccase arises as a promising alternative in the development of advanced oxidation processes for the removal of xenobiotics. The aim of this work is to develop various types of nanobiocatalysts based on laccase immobilized on different superparamagnetic and non-magnetic nanoparticles to improve the stability of the biocatalysts. Several techniques of enzyme immobilization were evaluated based on ionic exchange and covalent bonding. The highest yields of laccase immobilization were achieved for the covalent laccase nanoconjugates of silica-coated magnetic nanoparticles (2.66 U mg−1 NPs), formed by the covalent attachment of the enzyme between the aldehyde groups of the glutaraldehyde-functionalized nanoparticle and the amino groups of the enzyme. Moreover, its application in the biotransformation of phenol as a model recalcitrant compound was tested at different pH and successfully achieved at pH 6 for 24 h. A sequential batch operation was carried out, with complete recovery of the nanobiocatalyst and minimal deactivation of the enzyme after four cycles of phenol oxidation. The major drawback associated with the use of the nanoparticles relies on the energy consumption required for their production and the use of chemicals, that account for a major contribution in the normalized index of 5.28 × 10−3. The reduction of cyclohexane (used in the synthesis of silica-coated magnetic nanoparticles) led to a significant lower index (3.62 × 10−3); however, the immobilization was negatively affected, which discouraged this alternative
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Oxidation of flame retardant Tetrabromobisphenol A by a biocatalytic nanofiber of chloroperoxidase

  • García Zamora, José Luis
  • Santacruz Vázquez, Verónica
  • Valera Pérez, Miguel Ángel
  • Moreira Vilar, María Teresa
  • Cárdenas Chávez, Diana
  • Tapia Salazar, Mireya
  • Torres, Eduardo
Background: Tetrabromobisphenol (TBBPA), a flame retardant compound, is considered a ubiquitous pollutant, with potential impact on the environment and human health. Several technologies have been applied to accelerate its degradation and minimize environmental impacts. Due to its aromaticity character, peroxidase enzymes may be employed to carry out its transformation in mild conditions. Therefore, the purpose of this work was to determine the capacity of the enzyme chloroperoxidase (CPO) to oxidize TBBPA in several water samples. Methods: The oxidation capacity of CPO was evaluated in catalytic conditions using water samples from surface and groundwater, as well as effluents from wastewater treatment plants. The biocatalytic performance of CPO was improved due to its immobilization on nanofibers composed of polyvinyl alcohol and chitosan (PVA/chitosan). Results: Free and immobilized CPO were able to transform more than 80% in short reaction times (60 min); producing more biodegradable and less toxic products. Particularly, the immobilized enzyme was catalytically active in a wider range of pH than the free enzyme with the possibility of reusing it up to five times. Conclusions: The biocatalytic oxidation of TBBPA under environmental conditions is highly efficient, even in complex media such as treated effluents of wastewater treatment plants
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Novel synthetic routes of large-pore magnetic mesoporous nanocomposites (SBA-15/Fe3O4) as potential multifunctional theranostic nanodevices

  • Vargas Osorio, Zulema
  • González Gómez, Manuel Antonio
  • Piñeiro Redondo, Yolanda
  • Vázquez Vázquez, Carlos
  • Rodríguez Abreu, Carlos
  • López Quintela, Manuel Arturo
  • Rivas Rey, José
In this paper, novel magnetic silica nanocomposites were prepared by anchoring magnetite nanoparticles onto the outer surface of mesoporous SBA-15 silica; the magnetic nanoparticles were prepared by microemulsion and solvothermal methods, varying the synthesis conditions in order to control the final physicochemical, textural and magnetic properties. The morphology and mesostructure of the materials were characterized by X-ray diffraction (XRD), Fourier-Transform Infrared Spectroscopy (FTIR), N2 adsorption–desorption, and Transmission and Scanning Electron Microscopy (TEM and SEM). Magnetic silica nanocomposites feature a two-dimensional hexagonal arrangement constituted by a homogeneous pore channel system with diameters between 13 and 18 nm and a Brunauer–Emmett–Teller (BET) surface area higher than 260 m2 g−1. The different morphologies of the samples are given by the presence of diverse magnetic nanoparticle arrangements covalently linked onto the outer surface of the mesoporous silica rods. This confers on them a superparamagnetic behaviour with a magnetic response between 50–80 emu g−1, even though the weight percent of magnetite present in the samples does not exceed 21.7%. In addition, the magnetic nanocomposites exhibit magnetic hyperthermia with moderate Specific Absorption Rate (SAR) values
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Enhanced Photocatalytic Activity of Semiconductor Nanocomposites Doped with Ag Nanoclusters Under UV and Visible Light

  • González-Rodríguez, Jorge
  • Fernández Fernández, Lucía
  • Bava, Yanina B.
  • Buceta Fernández, David
  • Vázquez Vázquez, Carlos
  • López Quintela, Manuel Arturo
  • Feijoo Costa, Gumersindo
  • Moreira Vilar, María Teresa
Emerging contaminants (ECs) represent a wide range of compounds, whose complete elimination from wastewaters by conventional methods is not always guaranteed, posing human and environmental risks. Advanced oxidation processes (AOPs), based on the generation of highly oxidizing species, lead to the degradation of these ECs. In this context, TiO2 and ZnO are the most widely used inorganic photocatalysts, mainly due to their low cost and wide availability. The addition of small amounts of nanoclusters may imply enhanced light absorption and an attenuation effect on the recombination rate of electron/hole pairs, resulting in improved photocatalytic activity. In this work, we propose the use of silver nanoclusters deposited on ZnO nanoparticles (ZnO–Ag), with a view to evaluating their catalytic activity under both ultraviolet A (UVA) and visible light, in order to reduce energetic requirements in prospective applications on a larger scale. The catalysts were produced and then characterized by scanning electron microscopy (SEM), X-ray diffractometry (XRD) and inductively coupled plasma-optical emission spectrometry (ICP-OES). As proof of concept of the capacity of photocatalysts doped with nanoclusters, experiments were carried out to remove the azo dye Orange II (OII). The results demonstrated the high photocatalytic efficiency achieved thanks to the incorporation of nanoclusters, especially evident in the experiments performed under white light
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Fenton and Photo-Fenton Nanocatalysts Revisited from the Perspective of Life Cycle Assessment

  • Feijoo Moreira, Sara
  • González-Rodríguez, Jorge
  • Fernández Fernández, Lucía
  • Vázquez Vázquez, Carlos
  • Feijoo Costa, Gumersindo
  • Moreira Vilar, María Teresa
This study provides an overview of the environmental impacts associated with the production of different magnetic nanoparticles (NPs) based on magnetite (Fe3O4), with a potential use as heterogeneous Fenton or photo-Fenton catalysts in wastewater treatment applications. The tendency of Fe3O4 NPs to form aggregates in water makes necessary their decoration with stabilizing agents, in order to increase their catalytic activity. Different stabilizing agents were considered in this study: poly(acrylic acid) (PAA), polyethylenimine (PEI) and silica (SiO2), as well as the immobilization of the magnetite-based catalysts in a mesoporous silica matrix, SBA-15. In the case of photo-Fenton catalysts, combinations of magnetite NPs with semiconductors were evaluated, so that magnetic recovery of the nanomaterials is possible, thus allowing a safe discharge free of NPs. The results of this study suggest that magnetic nanoparticles coated with PEI or PAA were the most suitable option for their applications in heterogeneous Fenton processes, while ZnO-Fe3O4 NPs provided an interesting approach in photo-Fenton. This work showed the importance of identifying the relevance of nanoparticle production strategy in the environmental impacts associated with their use
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Bundling the removal of emerging contaminants with the production of ligninolytic enzymes from residual streams

  • González Rodríguez, Sandra
  • Chen, Xinyi
  • Eibes González, Gemma María
  • Pizzi, Antonio
  • Feijoo Costa, Gumersindo
  • Moreira Vilar, María Teresa
  • Lu Chau, Thelmo Alejandro
Enzymes offer interesting features as biological catalysts for industry: high specificity, activity under mild conditions, accessibility, and environmental friendliness. Being able to produce enzymes in large quantities and having them available in a stable and reusable form reduces the production costs of any enzyme-based process. Agricultural residues have recently demonstrated their potential as substrates to produce ligninolytic enzymes by different white rot fungi. In this study, the biotechnological production of a manganese peroxidase (MnP) by Irpex lacteus was conducted through solid-state fermentation (SSF) with wheat straw as substrate and submerged fermentation (SmF) employing wheat straw extract (WSE). The obtained enzyme cocktail also showed manganese-independent activity (MiP), related to the presence of a short MnP and a dye-decolorizing peroxidase (DyP) which was confirmed by shotgun proteomic analyses. In view of the enhanced production of ligninolytic enzymes in SmF, different parameters such as WSE concentration and nitrogen source were evaluated. The highest enzyme titers were obtained with a medium formulated with glucose and peptone (339 U/L MnP and 15 U/L MiP). The scale-up to a 30 L reactor achieved similar activities, demonstrating the feasibility of enzyme production from the residual substrate at different production scales. Degradation of five emerging pollutants was performed to demonstrate the high oxidative capacity of the enzyme. Complete removal of hormones and bisphenol A was achieved in less than 1 h, whereas almost 30% degradation of carbamazepine was achieved in 24 h, which is a significant improvement compared to previous enzymatic treatments of this compound
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Novel synthetic routes of large-pore magnetic mesoporous nanocomposites (SBA-15/Fe3O4) as potential multifunctional theranostic nanodevices

  • Vargas-Osorio, Zulema
  • Rodríguez-Abreu, Carlos
In this paper, novel magnetic silica nanocomposites were prepared by anchoring magnetite nanoparticles onto the outer surface of mesoporous SBA-15 silica; the magnetic nanoparticles were prepared by microemulsion and solvothermal methods, varying the synthesis conditions in order to control the final physicochemical, textural and magnetic properties. The morphology and mesostructure of the materials were characterized by X-ray diffraction (XRD), Fourier-Transform Infrared Spectroscopy (FTIR), N2 adsorption-desorption, and Transmission and Scanning Electron Microscopy (TEM and SEM). Magnetic silica nanocomposites feature a two-dimensional hexagonal arrangement constituted by a homogeneous pore channel system with diameters between 13 and 18 nm and a Brunauer-Emmett-Teller (BET) surface area higher than 260 m2 g-1. The different morphologies of the samples are given by the presence of diverse magnetic nanoparticle arrangements covalently linked onto the outer surface of the mesoporous silica rods. This confers on them a superparamagnetic behaviour with a magnetic response between 50-80 emu g-1, even though the weight percent of magnetite present in the samples does not exceed 21.7%. In addition, the magnetic nanocomposites exhibit magnetic hyperthermia with moderate Specific Absorption Rate (SAR) values. © 2017 The Royal Society of Chemistry., This work was supported in part by MINECO (Spain) and FEDER Funds (projects MAT 2015-67458-P and CTQ2016-79461-R); and the European Commission (PANA project, Call H2020-NMP-2015-two-stage, Grant 686009; and the MADIA project, Call H2020-ICT-2016-1, Grant 732678)., Peer reviewed