Pasar al contenido principal

PRODUCCION DE BIOADHESIVOS AMBIENTALMENTE AMIGABLES A PARTIR DE RECURSOS RENOVABLES

PCI2018-092866

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos Programación Conjunta Internacional
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDADE DE SANTIAGO DE COMPOSTELA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Tannin-based bio-adhesives for the wood panel industry as sustainable alternatives to petrochemical resins

  • Arias Calvo, Ana
  • González García, Sara
  • Moreira Vilar, María Teresa
  • Feijoo Costa, Gumersindo
The development of natural-based adhesives is a key aspect in reducing the consumption of fossil resources, in adapting to legislation on the use of formaldehyde and in ensuring the sustainability of the wood panel industry. This study focuses on five alternatives for tannin-based adhesives (tannin-paraformaldehyde, tannin-glyoxal, tannin-hexamine, tannin non-isocyanate polyurethane (NIPU) with ammonium hydroxide and tannin NIPU with HDMA bio-adhesives) as potential proposals for the substitution of synthetic adhesives currently used: Urea-formaldehyde (UF), Phenol-formaldehyde (PF) and melamine urea formaldehyde (MUF). Modeling and simulation tools were used for the conceptual design of the reaction stage of the bio-adhesives due to the lack of real data from industrial scale production systems. The life cycle assessment methodology was used to identify the environmental impacts associated with the production processes of these bio-adhesives. The results obtained showed that tannin NIPU bio-adhesive with ammonium hydroxide has the best environmental profile, although the other alternative bio-adhesives also show good environmental profiles compared to synthetic adhesives. Sensitivity analyses have been carried out after evaluating the main hot spots in the production processes. In all of them, reductions of the environmental impacts have been observed, with the replacement of DMC by EC and the reduction of energy consumption being the options that showed the greatest improvements
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Capítulo o parte de un libro (BookPart)

Cambio de paradigma en el diseño conceptual de procesos químicos y biotecnológicos en el marco de la Economía Circular

  • Feijoo Costa, Gumersindo
  • Conde, Júlio J.
  • Moreira Vilar, María Teresa
El sistema de producción lineal (extracción, fabricación, uso y eliminación) ha alcanzado sus límites. El actual enfoque predominante en la extracción y el agotamiento de las materias primas y los residuos generados a lo largo de la cadena de suministro del producto causa un enorme impacto medioambiental y socioeconómico. Como contrapunto, el término economía circular (EC) surge como concepto estratégico que aborda los aspectos económicos, medioambientales y sociales en el uso sostenible de los recursos y la gestión de los residuos asociados a la actividad productiva. Como su propio nombre indica, es necesario cerrar el círculo, por lo que la estrategia basada en la economía circular debe garantizar la sostenibilidad de los productos, servicios, materiales, agua y energía, a través de la gestión de los recursos y la valorización de los residuos. En este capítulo se destacan el enfoque de la economía circular en la ingeniería de procesos químicos y biotecnológicos. Es especialmente en este sector donde el uso eficiente de los recursos adquiere mayor importancia, ya que el modelo de producción debe asegurar que los residuos y los subproductos del proceso vuelvan a entrar en el ciclo de producción como materias primas secundarias. Cualquier intento de análisis, modelización, aplicación y/o evaluación de la EC requiere un enfoque holístico y estructurado que puede combinarse con el Análisis del Ciclo de Vida (ACV) como metodología de análisis. Este capítulo presenta los fundamentos de la EC en el diseño de procesos químicos y biotecnológicos junto con ejemplos de aplicaciones en los que se analiza cómo las estrategias de valorización de residuos mejoran el balance energético de la instalación, así como la cadena de valor del proceso.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

New environmental approach based on a combination of planetary boundaries and life cycle assessment in the wood-based bioadhesive market

  • Arias Calvo, Ana
  • Feijoo Costa, Gumersindo
  • Moreira Vilar, María Teresa
The role of the bioeconomy based on the use of renewable resources and also on the valorization of bio-based waste could contribute to a higher degree of sustainability. In this sense, biobased processes and products should exhibit values for indicators that demonstrate and outperform their competing counterparts. To this end, it is essential to apply a methodology to conduct the assessment of environmental impacts and potential damages at a global level. Life cycle assessment (LCA) has proven to be a suitable method to study the environmental profiles and damage scores of products and/or processes within their life cycle. In this regard, LCA impact scores are transformed into planetary boundary (PB) values, for which a threshold has been previously established. This has been the focus of this article, in which the environmental sustainability ratios of different bioadhesive scenarios have been evaluated under the combined framework of PBs and LCA for wood-based bioadhesives following different allocation approaches based on egalitarian, utilitarian, and grandfathering principles. In this way, it has been possible to assess the potential of bioadhesives to replace synthetic resins in the wood-based panel production chain. The results obtained show some variability in the environmental profiles and indicators, but it is possible to conclude that the bioadhesives selected can be considered as sustainable alternatives. However, improvements are required in certain PB categories, such as climate change or biogeochemical flows, as in some cases, the threshold value is exceeded. Future research should focus on two strategic lines: the application of guidelines for the evaluation of environmental sustainability at the planetary level and the optimization of bio-adhesive production to reduce their impact with the aim of achieving a more adequate sustainability ratio
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Towards industrial application of fungal pretreatment in 2G biorefinery: scale-up of solid-state fermentation of wheat straw

  • Álvarez Pallín, Miguel
  • González Rodríguez, Sandra
  • Eibes González, Gemma María
  • López Abelairas, María
  • Moreira Vilar, María Teresa
  • Lema Rodicio, Juan Manuel
  • Lu Chau, Thelmo Alejandro
Fungal pretreatment of lignocellulosic biomass for bioethanol production is an environmental-friendly alternative to steam explosion. However, this biological pretreatment has been tested on a small scale, where most of the typical problems of solid-state fermentations (SSF), such as limited aeration or temperature control, are not observed. The main objective of this study was to assess the feasibility of the fungal pretreatment of lignocellulosic biomass (wheat straw) at a demonstration scale using the white-rot fungus Irpex lacteus to improve straw digestibility. Different configurations were evaluated for the design of a 22 L SSF reactor, but a versatile vertical design that can operate as a packed-bed and as a tray reactor was selected. The wheat straw digestibility obtained in the SSF bioreactor after 21 days of pretreatment (60.6%) was similar to that achieved on a small scale (57.9%). In addition, the most common online monitoring variables (temperature and CO2 production) correlate with the fungal action on wheat straw. As well as the weight loss, obtaining comparable results at flask and reactor scale (30 and 34.5%, respectively)
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Bundling the removal of emerging contaminants with the production of ligninolytic enzymes from residual streams

  • González Rodríguez, Sandra
  • Chen, Xinyi
  • Eibes González, Gemma María
  • Pizzi, Antonio
  • Feijoo Costa, Gumersindo
  • Moreira Vilar, María Teresa
  • Lu Chau, Thelmo Alejandro
Enzymes offer interesting features as biological catalysts for industry: high specificity, activity under mild conditions, accessibility, and environmental friendliness. Being able to produce enzymes in large quantities and having them available in a stable and reusable form reduces the production costs of any enzyme-based process. Agricultural residues have recently demonstrated their potential as substrates to produce ligninolytic enzymes by different white rot fungi. In this study, the biotechnological production of a manganese peroxidase (MnP) by Irpex lacteus was conducted through solid-state fermentation (SSF) with wheat straw as substrate and submerged fermentation (SmF) employing wheat straw extract (WSE). The obtained enzyme cocktail also showed manganese-independent activity (MiP), related to the presence of a short MnP and a dye-decolorizing peroxidase (DyP) which was confirmed by shotgun proteomic analyses. In view of the enhanced production of ligninolytic enzymes in SmF, different parameters such as WSE concentration and nitrogen source were evaluated. The highest enzyme titers were obtained with a medium formulated with glucose and peptone (339 U/L MnP and 15 U/L MiP). The scale-up to a 30 L reactor achieved similar activities, demonstrating the feasibility of enzyme production from the residual substrate at different production scales. Degradation of five emerging pollutants was performed to demonstrate the high oxidative capacity of the enzyme. Complete removal of hormones and bisphenol A was achieved in less than 1 h, whereas almost 30% degradation of carbamazepine was achieved in 24 h, which is a significant improvement compared to previous enzymatic treatments of this compound