Pasar al contenido principal

HACIA UNA BIORREFINERIA INTEGRADA UTILIZANDO BIOMASA LIGNOCELULOSICA

CTQ2017-84963-C2-2-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario INSTITUTO NACIONAL DE INVESTIGACIÓN Y TECNOLOGÍA AGRARIA Y ALIMENTARIA - CSIC

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of additives on the enzymatic hydrolysis of pre-treated wheat straw

  • Vergara, Priscilla
  • Ladero, Miguel
  • Carbajo, J. M.
  • García-Ochoa, Félix
  • Villar, J. C.
9 Pág. Instituto de Ciencias Forestales (ICIFOR), Enzymatic hydrolysis of pre-treated wheat straw has been studied. Several additives have been checked as potential improvers of glucose yield in the enzymatic hydrolysis, trying to avoid the cellulases inhibition by the lignin as a cause of the decrease of the saccharification rate of lignocellulosic biomass. Non-ionic surfactants, such as Tween 80 (poly(oxyethylene)20-sorbitan-monooleate) and polyethylene glycol-6000, and proteins, as bovine serum albumin, casein and skimmed milk powder, have been used to improve the sugars yield in the enzymatic hydrolysis. Two pre-treated wheat straw materials, one with high delignification and another with low delignification, have been tested. Three concentrations of each additive have been considered. The results obtained point out that the lignin content of the pre-treated lignocellulosic biomass has a decisive influence in reaching a high yield in the enzymatic saccharification. The additives checked have a moderate effect on the cellulose hydrolysis rate. The more favorable option combines high delignification with the use of a cheap protein such as casein, reaching a glucose yield of 88.6% when the best conditions are employed., This study has been supported by Spanish Ministry of Economy and Competitiveness (MINECO) under contact CTQ2017-84963-C2-2-R, and Madrid Regional Government (Project RETO PROSOST P2013-MAE2907). Grant support for Priscilla Vergara by the National Commission for Scientific and Technological Research (CONICYT- Grant 72160108), of the Ministry of Education of Chile, is also gratefully recognized., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multi-feedstock lignocellulosic biorefineries based on biological processes: An overview

  • García-Ochoa, Félix
  • Vergara, Priscilla
  • Wojtusik, M.
  • Gutiérrez, Soledad
  • Santos, Victoria E.
  • Ladero, Miguel
  • Villar, J. C.
26 Pág.  Instituto de Ciencias Forestales (ICIFOR), The evolution of lignocellulosic biorefineries increasing the process complexity and integration through the processing of multiple raw biomass-based materials into several products is described. This critical overview deals with available lignocellulosic feedstocks, pretreatment operations, enzymatic saccharification to monosaccharides and their final transformation into bioethanol and other bio-based products. Aspects as process operating conditions, modes of operation, underlying physical and chemical phenomena, and mathematical modelling are addressed. Pretreatment stage is a key step for any further processing, specially when using multifeedstock. The use of ethanol-water mixtures for biomass fractionation is a promising treatment able to compete with the nowadays more employed pretreatment such as steam explotion and diluted acid processes. Enzymatic saccharification of pretreated biomass has been analysed considering its complexity and selectivity. Its mathematical modelling is described in detail, together with the underlying phenomena, highlighting the importance of mass transfer in a biphasic system. An adequate operation unit design, scale-up and control, and process design and integration can be ensured in this way. Finally, biotransformations of monosaccharides to biofuels and platform chemicals is analysed as they are becoming key processes within bioeconomy, in the framework of integrated biorefinery to fuels, chemicals and materials., The authors acknowledge the support of the Science and Innovation Ministry , which funded this work through Projects CTQ2017-84963-C2 (R-1 and R-2) and PCI2018-093114, and Madrid Regional Government for funding via Project RETOPROSOST P2013-MAE2907. We also thanks to CONICYT – Doctorado Becas Chile/2015- 72160108, for funding PV post-doctoral grant. This work has also been facilited by the network RESALVALOR supported by CYTED with ref. 319RT0575., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Structural properties of coated papers with cellulosic nanofibres using different metering systems and drying technologies

  • Fillat, Ursula
  • Vergara, Priscilla
  • Villar, J. C.
  • Gómez Hernández, Nuria
10 Pág., Cellulose nanofibres (CNFs) can improve the quality of cardboard packaging. This work evaluates the ability of CNFs to impart barrier properties to commercial paper used in packaging. Three CNFs were tested: mechanical (m-CNFs), by TEMPO mediated oxidation (T-CNFs) and carboxymethylated (c-CNFs). Two metering systems (wound rod and blade micrometer) were used to apply one, five and 10 layers of CNFs suspensions, and two drying methods (hot air jet and contact with a hot polished surface in a speed dryer) were evaluated. The quality of the CNFs coated papers was measured by structural (thickness, roughness and air permeance) and optical properties (gloss) and visual appearance. c-CNFs coatings obtained the lowest air permeance values, from 0.1 to 0.01 μm/Pa·s depending on the number of coating layers, and were below those of commercial starch. T-CNFs also reduced air permeance at low weights, reaching 1.1 μm/Pa·s with one layer and 0.1 when five layers were applied. Five layers of m-CNFs were needed for good results. SEM images showed good coverage at low coat weight in c-CNFs and T-CNFs, whereas m-CNFs was unable to cover the base paper. With increased layers of m-CNFs, an adequate film was formed. c-CNFs had the highest fibrillation degree and acid group content, and was the CNFs coating with most potential as a coating for paper., This work was supported by the Spanish Ministry of Science and Innovation (CTQ2017-84963-C2-2-R and PID2020-114365RB-C22) and Madrid Regional Government (RETO PROSOST S2018/EMT-4459). Morphological analysis of coated surface samples was carried out in the National Centre of Electronic Microscopy at the Complutense University of Madrid. The authors thank P. Pereira, P. Meza and P. Castellano for their contribution to the experimental work., Peer reviewed
Docta Complutense
Publicación Artículo científico (JournalArticle)

Lignocellulosic biorefineries based on multifeedstocks and the biological transformation to multiple products: An overview

  • García-Ochoa Soria, Félix
  • Vergara Alarcón, Priscilla
  • Wojtusik, Mateo
  • Gutiérrez, Soledad
  • Santos Mazorra, Victoria Eugenia
  • Ladero Galán, Miguel
  • Villar Gutiérrez, Juan Carlos
The evolution of lignocellulosic biorefineries increasing the process complexity and integration through the processing of multiple raw biomass-based materials into several products is described. This critical overview deals with available lignocellulosic feedstocks, pretreatment operations, enzymatic saccharification to monosaccharides and their final transformation into bioethanol and other bio-based products. Aspects as process operating conditions, modes of operation, underlying physical and chemical phenomena, and mathematical modelling are addressed. Pretreatment stage is a key step for any further processing, specially when using multifeedstock. The use of ethanol-water mixtures for biomass fractionation is a promising treatment able to compete with the nowadays more employed pretreatment such as steam explotion and diluted acid processes. Enzymatic saccharification of pretreated biomass has been analysed considering its complexity and selectivity. Its mathematical modelling is described in detail, together with the underlying phenomena, highlighting the importance of mass transfer in a biphasic system. An adequate operation unit design, scale-up and control, and process design and integration can be ensured in this way. Finally, biotransformations of monosaccharides to biofuels and platform chemicals is analysed as they are becoming key processes within bioeconomy, in the framework of integrated biorefinery to fuels, chemicals and materials.