Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Tesis doctoral (DoctoralThesis)

Modeling and control of an anthropomorphic robotic hand

  • Bensalah, Choukri
Mención Europea en el título de doctor, This thesis presents methods and tools for enabling the successful use of robotic hands. For highly dexterous and/or anthropomorphic robotic hands, these methods have to share some common goals, such as overcoming the potential complexity of the mechanical design and the ability of performing accurate tasks with low and efficient computational cost. A prerequisite for dexterity is to increase the workspace of the robotic hand. For this purpose, the robotic hand must be considered as a single multibody system. Solving the inverse kinematics problem of the whole robotic hand is an arduous task due to the high number of degrees of freedom involved and the possible mechanical limitations, singularities and other possible constraints. The redundancy has proven to be of a great usefulness for dealing with potential constraints. To be able to exploit the redundancy for dealing with constraints, the adopted method for solving the inverse kinematics must be robust and extendable. Obviously, addressing such complex problem, the method will certainly be computationally heavy. Thus, one of the aims of this thesis is to resolve the inverse kinematics problem of the whole robotic hand under constraints, taking into account the computational cost. To this end, this thesis extends and reduces the most recent Selectively Damped Least Squares method which is based on the computation of all singular values, to deal with constraints with a minimum computational cost. New estimation algorithm of singular values and their corresponding singular vectors is proposed to reduce the computational cost. The reduced extended selectively damped least squares method is simulated and experimentally evaluated using an anthropomorphic robotic hand as a test bed. On the other hand, dexterity depends not only on the accuracy of the position control, but also on the exerted forces. The tendon driven modern robotic hands, like the one used in this work, are strongly nonlinear dynamic systems, where motions and forces are transmitted remotely to the finger joints. The problem of modeling and control of position and force simultaneously at low level control is then considered. A new hybrid control structure based on the succession of two sliding mode controllers is proposed. The force is controlled by its own controller which does not need a contact model. The performance of the proposed controller is evaluated by performing the force control directly using the force sensor information of the fingertip, and indirectly using the torque control of the actuator. Finally, we expect that the applications of the methods presented in this thesis can be extended to cover different issues and research fields and in particular they can be used in a variety of algorithm that require the estimation of singular values., This work was partially supported by the European project HANDLE, FP7-231640, and by the Spanish ministry MICINN through FPI scholarship within the project DPI-2005-04302., Programa Oficial de Doctorado en Ingeniería Eléctrica, Electrónica y Automática, Presidente: Anis Sahbani.- Secretario: Fares Jawad Moh D Abu-Dakka.- Vocal: Claudio Rossi
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Contribución de congreso (ConferenceOutput)

A new finger inverse kinematics method for an anthropomorphic hand

  • Bensalah, Choukri
  • Abderrahim Fichouche, Mohamed
  • González Gómez, Juan
Proceedings of: 2011 IEEE International Conference on Robotics and Biomimetics (ROBIO), December 7-11, 2011, Phuket (Thailand), In this paper, a new method for solving the inverse kinematics of the fingers of an anthropomorphic hand is proposed. Our approach combines a Modified Selectively Damped Least Squares (MSDLS) and Jacobian Transpose (JT) methods. The main advantages of this method with respect to the ordinary SDLS are: optimal Cartesian increment, shorter computation time and better response near singularity configurations. The original JT method exhibits a strong shattering with small magnitudes which occurs near the goal position or in the case of unreachable positions. Like in the SDLS, a damping factor was applied to each input singular vector to filter the undesirable behavior. A comparative study between the MSDLS applied to the inverse Jacobian and JT matrix is developed to investigate manipulator performance in critical end-point positions of the index finger of a commercial anthropomorphic robotic hand and also to evaluate the impact of the increment length on computation time., This work was partially supported by the European project HANDLE, FP7-231640. Choukri Bensalah is supported by the Spanish ministry MICINN through FPI scholarship within the project DPI-2005-04302