Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 19
Encontrada(s) 1 página(s)

e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Tesis doctoral (DoctoralThesis)

Model-based motor control learning in robotics

  • González-Quijano Álvarez, Javier
Robot motor control learning is currently a very active research area in robotics. The challenge consists in designing an efficient heuristic to guide a search process which will attempt to find and appropriate motor control policy capable of accomplishing a certain task. Implicitly or explicitly, the search is an optimization process of some specific objective function. This means, in practise, that the robot will have to evaluate potential candidate solutions in the real environment. Each evaluation is a trial-and-error execution that will end up with useful information to feed the heuristic that will decide which potential candidate solution will be evaluated in the next execution. Many learning techniques have been developed during past decades. A very general classification divides these methods into two groups: global learning and local learning methods. The state of art in local learning techniques is very developed. There are hundreds of examples where complex learning tasks can be achieved using these methods. Nevertheless, they all constraint the search space to make the learning process feasible. The result is always a local optimum of the objective function. On the other hand, global learning techniques are oriented to find global optimum solutions. This is generally a much harder problem as the search space is larger. Research on global learning methods is also large. However, there is a lack of methods with direct applicability in complex robotics systems without assuming prior knowledge about the task. This is mainly due to two facts. First, they scale badly to problems with continuous and high dimensional state-action spaces. Second, too many real robot-environment interactions are needed. Whatever the performance of these methods is, it seems to be clear that global methods based on model-based learning have clear advantages with respect to model-free methods, especially those related to the minimization of the number of trial-error executions. A complete study of the most relevant work done in motor control learning is performed in Chapter 2, where the advantages and disadvantages of the different existing methods are discussed. Nevertheless, this thesis puts the focus on overcoming the limitations on current global learning methods, concretely those following a model-based learning philosophy. In our opinion, they have more advantages. This statement will be justified during the reading of this chapter. As already mentioned, every learning problem is indeed an optimization process. Learning methods based on an explicit optimization process have several advantages when the complete search space can be represented by control policy functions depending on a reduce set of parameters. This occurs always when taking advantage of the existing controllers in literature. For these cases, a new learning method consisting in an optimization process using surrogate models has been proposed in Chapter 3. Some learning problems are very complex because there is any controller which a priori can solve the objective task. In these cases is very hard to parametrize any control policy and therefore it is necessary to search directly for a sequence of low-level motor control commands. Accomplishing this task is very difficult if seeking for optimal solutions. If optimality is not crucial, it is possible to take advantage of kinodynamic planning algorithms to solve the problem. However, planners need models, and models are not known, otherwise it would not be a learning problem. Nevertheless, this research has found the way to combine kinodynamic planning with model learning to manage an efficient new solution for learning problems from scratch (without assuming prior knowledge). This finding is described in Chapter 4 and the first part of Chapter 5. Despite the effectiveness of such solution, it still lacks of a ideal behaviour for its application in real environments as the provided control policies are open-loop. Nonetheless, it is possible to combine the output of such algorithm with the potential of model predictive control. This is done in the second part of such chapter. The result is a complete architecture capable of providing robust close-loop policies capable of operating efficiently in real environments., I would like to acknowledge the Spanish Government for providing me with a FPU fellowship award from Spanish Ministry of Education (MEC), which certainly has helped on the purpose of achieving the results of this research work. Furthermore, it is fair to specially mention the European project HANDLE funded within the Seventh Framework Programme (FP7)., Programa Oficial de Doctorado en Ingeniería Eléctrica, Electrónica y Automática, Presidente: Antonio Barrientos Cruz.- Secretario: Fares Jawad Moh D Abu-Dakka.- Vocal: Claudio Rossi
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Tesis doctoral (DoctoralThesis)

Modeling and control of an anthropomorphic robotic hand

  • Bensalah, Choukri
Mención Europea en el título de doctor, This thesis presents methods and tools for enabling the successful use of robotic hands. For highly dexterous and/or anthropomorphic robotic hands, these methods have to share some common goals, such as overcoming the potential complexity of the mechanical design and the ability of performing accurate tasks with low and efficient computational cost. A prerequisite for dexterity is to increase the workspace of the robotic hand. For this purpose, the robotic hand must be considered as a single multibody system. Solving the inverse kinematics problem of the whole robotic hand is an arduous task due to the high number of degrees of freedom involved and the possible mechanical limitations, singularities and other possible constraints. The redundancy has proven to be of a great usefulness for dealing with potential constraints. To be able to exploit the redundancy for dealing with constraints, the adopted method for solving the inverse kinematics must be robust and extendable. Obviously, addressing such complex problem, the method will certainly be computationally heavy. Thus, one of the aims of this thesis is to resolve the inverse kinematics problem of the whole robotic hand under constraints, taking into account the computational cost. To this end, this thesis extends and reduces the most recent Selectively Damped Least Squares method which is based on the computation of all singular values, to deal with constraints with a minimum computational cost. New estimation algorithm of singular values and their corresponding singular vectors is proposed to reduce the computational cost. The reduced extended selectively damped least squares method is simulated and experimentally evaluated using an anthropomorphic robotic hand as a test bed. On the other hand, dexterity depends not only on the accuracy of the position control, but also on the exerted forces. The tendon driven modern robotic hands, like the one used in this work, are strongly nonlinear dynamic systems, where motions and forces are transmitted remotely to the finger joints. The problem of modeling and control of position and force simultaneously at low level control is then considered. A new hybrid control structure based on the succession of two sliding mode controllers is proposed. The force is controlled by its own controller which does not need a contact model. The performance of the proposed controller is evaluated by performing the force control directly using the force sensor information of the fingertip, and indirectly using the torque control of the actuator. Finally, we expect that the applications of the methods presented in this thesis can be extended to cover different issues and research fields and in particular they can be used in a variety of algorithm that require the estimation of singular values., This work was partially supported by the European project HANDLE, FP7-231640, and by the Spanish ministry MICINN through FPI scholarship within the project DPI-2005-04302., Programa Oficial de Doctorado en Ingeniería Eléctrica, Electrónica y Automática, Presidente: Anis Sahbani.- Secretario: Fares Jawad Moh D Abu-Dakka.- Vocal: Claudio Rossi
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Tesis doctoral (DoctoralThesis)

Desarrollo y evaluación de estrategias para aplicaciones de percepción 3D usando cámaras de rango

  • Rodríguez Jiménez, Silvia
La evolución de sensores de profundidad de bajo coste en los últimos años ha permitido un uso más generalizado de las cámaras de rango. Su aplicación, gracias a que proporcionan información de profundidad en tiempo real, se ha ampliado a diversos ámbitos de percepción de objetos donde es necesario el conocimiento del entorno en tres dimensiones (3D) para poder interaccionar con él. Por este motivo, existe una demanda creciente de sistemas de percepción visual capaces de explotar la información procedente de los dispositivos de rango. Sin embargo, la mayoría de los enfoques existentes presentan limitaciones en entornos poco estructurados, comunes en el mundo real. El objetivo de esta tesis es contribuir al progreso de sistemas eficaces de percepción 3D de objetos en este tipo de entornos, abordando diversos retos aún sin resolver como la falta de información a priori o ruido en las imágenes. Para ello se ha diseñado una metodología que permite desarrollar estrategias para entornos complejos con el objetivo de dar solución a los desafíos de percepción planteados, explotando al máximo las características de la escena. Para validar la estrategia planteada se ha seguido una metodología guiada por escenarios, por lo que para su evaluación se han seleccionado tres entornos con diferente complejidad, y lo suficientemente significativos a la vez que complementarios entre sí. Cada contexto se enmarca dentro de un grupo de escenarios semiestructurados de percepción visual, clasificados según condiciones ambientales así como grado de información conocida a priori. Para cada escenario se propone una estrategia, la cual se desarrolla y se evalúa exhaustivamente en un contexto experimental, seleccionando el hardware así como el software a implementar más adecuado a los requisitos y necesidades del entorno. El enfoque descrito en esta tesis permite reducir la incertidumbre centrándose en un determinado contexto para plantear la estrategia a seguir, reduciendo el espacio de estados sin afectar a la tarea a desempeñar., The evolution of low cost depth sensors in recent years has allowed a more widespread use of range cameras. They provide depth information in real time so their application has been extended to various areas of object perception where three-dimensional (3D) knowledge of the environment is mandatory to interact with it. For this reason, there is a growing demand for visual perception systems to exploit the information from range devices. However, most existing approaches are limited in unstructured environments, which are common in the real world. The objective of this thesis is to contribute to the progress of 3D object perception in these environments, addressing open challenges like lack of prior information or picture noise. A methodology to develop strategies for complex environment has been designed to solve the challenges, exploiting the characteristics of the scene. The strategy is validated following a methodology based on scenarios, so three environments have been selected with different complexity. These are sufficiently significant and complementary. Each context is part of a group of perception unstructured scenarios, classified by environmental conditions and the degree of information known a priori. For each scenario, a strategy is proposed, which is developed and evaluated thoroughly in an experimental context. This has also taken into account that hardware and software should be appropriated to the requirements and environmental needs. The approach described in this thesis decreases uncertainty by focusing on a particular context. Furthermore the state space is reduced without affecting the task to be performed., Esta tesis ha sido parcialmente financiada por el proyecto europeo HANDLE, dentro del Séptimo Programa Marco de la Comunidad Europea en virtud del acuerdo de subvención ICT 231640. También ha sido parcialmente financiada por una beca de Formación de Personal Investigador de la Universidad Carlos III de Madrid (PIF-UC3M ref. 03-1213)., Programa Oficial de Doctorado en Ingeniería Eléctrica, Electrónica y Automática, Presidente: José María Sebastián y Zúñiga.- Secretario: Juan Antonio Escalera Piña.- Vocal: Óscar Reinoso García
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Contribución de congreso (ConferenceOutput)

Multi-sensor based segmentation of human manipulation tasks

  • Hendrich, Norman
  • Klimentjew, Denis
  • Zhang, Jianwei
Proceedings of: 2010 IEEE Conference on Multisensor Fusion and Integration for Intelligent Systems (FMI), September 5-7, 2010, Salt Lake City, USA, In this paper we present an overview of a multisensor setup designed to record and analyse human in-hand manipulation - tasks consisting of several phases of finger motions following the initial grasp. During the experiments all of the hand, finger, and object positions are recorded, as are the contact forces applied to the manipulated objects. The use of instrumented sensing objects complements the data. The goal is to understand and extract a basic set of finger and hand movement patterns, which can then be combined to perform a complete manipulation task, and which can be transferred to control robotic hands. The segmentation of whole manipulation traces into several phases corresponding to individual basic patterns is the first step towards this goal. Initial analysis and segmentation of two typical manipulation tasks are presented, showing the advantages of the multi-modal analysis., This work is partially supported by the European project HANDLE ICT-23641O, www.handleproject.eul.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Contribución de congreso (ConferenceOutput)

Body schema acquisition through active learning

  • Martínez-Cantín, Rubén
  • Lopes, Manuel
  • Montesano, Luis
Proceedings of: 2010 IEEE International Conference on Robotics and Automation (ICRA'10), May 3-8, 2010, Anchorage (Alaska, USA), We present an active learning algorithm for the problem of body schema learning, i.e. estimating a kinematic model of a serial robot. The learning process is done online using Recursive Least Squares (RLS) estimation, which outperforms gradient methods usually applied in the literature. In addiction, the method provides the required information to apply an active learning algorithm to find the optimal set of robot configurations and observations to improve the learning process. By selecting the most informative observations, the proposed method minimizes the required amount of data. We have developed an efficient version of the active learning algorithm to select the points in real-time. The algorithms have been tested and compared using both simulated environments and a real humanoid robot., This work was supported in part by the FCT Programa Operacional Sociedade de Informaçao (POSC) in the frame of QCA III, PTDC/EEA-ACR/70174/2006 project and SFRH/BPD/48857/2008 grant; and in part by the EU Project Handle (EU-FP7-ICT-231640).
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Contribución de congreso (ConferenceOutput)

Progressive 3D reconstruction of unknown objects using one eye-in-hand camera

  • Walck, Guillaume
  • Drouin, Michel
Proceedings of: 2009 IEEE International Conference on Robotics and Biomimetics (ROBIO 2009) December 19-23, 2009, Guilin, China, This paper presents a complete 3D-reconstruction method optimized for online object modeling in the context of object grasping by a robot hand. The proposed solution is based on images captured by an eye-in-hand camera mounted on the robot arm and is an original combination of classical but simplified reconstruction methods. The different techniques used form a process that offers fast, progressive and reactive reconstruction of the object., The research leading to these results has been partially supported by the HANDLE project, which has received funding from the European Communitity’s Seventh Framework Programme (FP7/2007-2013) under grant agreement ICT 231640
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Contribución de congreso (ConferenceOutput)

Novel miniature MRI-compatible fiber-optic force sensor for cardiac catherization procedures

  • Polygerinos, Panagiotis
  • Puangmali, Pinyo
  • Schaeffter, Tobias
  • Razavi, Reza
  • Seneviratne, Lakmal D.
  • Althoefer, Kaspar
Proceedings of: 2010 IEEE International Conference on Robotics and Automation (ICRA'10), May 3-8, 2010, Anchorage (Alaska, USA), This paper presents the prototype design and development of a miniature MR-compatible fiber optic force sensor suitable for the detection of force during MR-guided cardiac catheterization. The working principle is based on light intensity modulation where a fiber optic cable interrogates a reflective surface at a predefined distance inside a catheter shaft. When a force is applied to the tip of the catheter, a force sensitive structure varies the distance and the orientation of the reflective surface with reference to the optical fiber. The visual feedback from the MRI scanner can be used to determine whether or not the catheter tip is normal or tangential to the tissue surface. In both cases the light is modulated accordingly and the axial or lateral force can be estimated. The sensor exhibits adequate linear response, having a good working range, very good resolution and good sensitivity in both axial and lateral force directions. In addition, the use of low-cost and MR-compatible materials for its development makes the sensor safe for use inside MRI environments., The research leading to these results has received funding from the European Community's Seventh Framework Programme FP7/2007-2013 under Grant Agreement No. 231640
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Contribución de congreso (ConferenceOutput)

Gaussian Mixture Models for Affordance Learning Using Bayesian Networks

  • Osório, Pedro
  • Bernardino, Alexandre
  • Martínez-Cantín, Rubén
  • Santos-Victor, José
Proceedings of: IEEE/RSJ 2010 International Conference on Intelligent Robots and Systems (IROS 2010), October 18-22, 2010, Taipe, Taiwan, Affordances are fundamental descriptors of relationships between actions, objects and effects. They provide the means whereby a robot can predict effects, recognize actions, select objects and plan its behavior according to desired goals. This paper approaches the problem of an embodied agent exploring the world and learning these affordances autonomously from its sensory experiences. Models exist for learning the structure and the parameters of a Bayesian Network encoding this knowledge. Although Bayesian Networks are capable of dealing with uncertainty and redundancy, previous work considered complete observability of the discrete sensory data, which may lead to hard errors in the presence of noise. In this paper we consider a probabilistic representation of the sensors by Gaussian Mixture Models (GMMs) and explicitly taking into account the probability distribution contained in each discrete affordance concept, which can lead to a more correct learning., This work has been partly supported by PTDC/EEAACR/70174/2006, grant SFRH/BPD/48857/2008 from FCT and EU projects HANDLE and FIRST-MM.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Capítulo o parte de un libro (BookPart)

Xtru3D: Single-View 3D Object Reconstruction from Color and Depth Data

  • Rodríguez-Jiménez, Silvia
  • Burrus, Nicolas
  • Abderrahim Fichouche, Mohamed
D object reconstruction from single image has been a noticeable research trend in recent years. The most common method is to rely on symmetries of real-life objects, but these are hard to compute in practice. However, a large class of everyday objects, especially when manufactured, can be generated by extruding a 2D shape through an extrusion axis. This paper proposes to exploit this property to acquire 3D object models using a single RGB+Depth image, such as those provided by available low-cost range cameras. It estimates the hidden parts by exploiting the geometrical properties of everyday objects, and both depth and color information are combined to refine the model of the object of interest. Experimental results on a set of 12 common objects are shown to demonstrate not only the effectiveness and simplicity of our approach, but also its applicability for tasks such as robotic grasping., The research leading to these results has been funded by the HANDLE European project (FP7/2007-2013) under grant agreement ICT 231640-http://www.handle-project.eu., Publicado
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Contribución de congreso (ConferenceOutput)

Miniaturized force-indentation depth sensor for tissue abnormality identification during laparoscopic surgery

  • Liu, Hongbin
  • Li, Jichun
  • Poon, Qi-ian
  • Seneviratne, Lakmal D.
  • Althoefer, Kaspar
Proceedings of: 2010 IEEE International Conference on Robotics and Automation (ICRA'10), May 3-8, 2010, Anchorage (Alaska, USA), This paper presents a novel miniaturized force-indentation depth (FID) sensor designed to conduct indentation on soft tissue during minimally invasive surgery. It can intra-operatively aid the surgeon to rapidly identify the tissue abnormalities within the tissue. The FID sensor can measure the indentation depth of a semi-spherical indenter and the tissue reaction force simultaneously. It make use of with fiber optical fiber sensing method measure indentation depth and force and is small enough to fit through a standard trocar port with a diameter of 11 mm. The created FID sensor was calibrated and tested on silicone block simulating soft tissue. The results show that the sensor can measure the indentation depth accurately and also the orientation of the sensor with respect to the tissue surface whilst performing indentation., The research leading to these results has been partially supported by the HANDLE project, which has received funding from the European Communitity’s Seventh Framework Programme (FP7/2007-2013) under grant agreement ICT 231640
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Contribución de congreso (ConferenceOutput)

Arm-hand movement: imitation of human natural gestures with tenodesis effect

  • Nguyen, Kien-Cuong
  • Perdereau, Véronique
Proceedings of: 2011 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS '11), September 25-30, 2011, San Francisco, USA, For an anthropomorphic arm-hand robot, grasping and in-hand manipulating an object can be realized with numerous approach trajectories and grasping configurations. The redundancy at this level of the tasks is due to a large number of degrees-of-freedom (DOFs) of the arm-hand system. This redundancy constitutes a big challenge to the planning and control tasks of the robot. For this kind of tasks, human has his own choices privileging certain configurations over the others. These choices come from a long learning process which implicitly takes into account the mechanical constraints of the system. In this work, we concentrate our effort on deciphering certain mechanical constraints, ”tenodesis” phenomenon in particular, in order to solve the redundancy and imitate the human natural gestures in the tasks of grasping or in-hand manipulation., The research leading to these results has been supported by the HANDLE project, which has received funding from the European Communitys Seventh Framework Programme (FP7/2007-2013) under grant agreement ICT 231640.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Contribución de congreso (ConferenceOutput)

A new finger inverse kinematics method for an anthropomorphic hand

  • Bensalah, Choukri
  • Abderrahim Fichouche, Mohamed
  • González Gómez, Juan
Proceedings of: 2011 IEEE International Conference on Robotics and Biomimetics (ROBIO), December 7-11, 2011, Phuket (Thailand), In this paper, a new method for solving the inverse kinematics of the fingers of an anthropomorphic hand is proposed. Our approach combines a Modified Selectively Damped Least Squares (MSDLS) and Jacobian Transpose (JT) methods. The main advantages of this method with respect to the ordinary SDLS are: optimal Cartesian increment, shorter computation time and better response near singularity configurations. The original JT method exhibits a strong shattering with small magnitudes which occurs near the goal position or in the case of unreachable positions. Like in the SDLS, a damping factor was applied to each input singular vector to filter the undesirable behavior. A comparative study between the MSDLS applied to the inverse Jacobian and JT matrix is developed to investigate manipulator performance in critical end-point positions of the index finger of a commercial anthropomorphic robotic hand and also to evaluate the impact of the increment length on computation time., This work was partially supported by the European project HANDLE, FP7-231640. Choukri Bensalah is supported by the Spanish ministry MICINN through FPI scholarship within the project DPI-2005-04302
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Contribución de congreso (ConferenceOutput)

3D hand trajectory segmentation by curvatures and hand orientation for classification through a probabilistic approach

  • Faria, Diego R.
  • Dias, Jorge
Proceedings of: The 2009 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2009), October 11-15, 2009, St. Louis, USA, In this work we present the segmentation and classification of 3D hand trajectory. Curvatures features are acquired by (r, θ, h) and the hand orientation is acquired by approximating the hand plane in 3D space. The 3D positions of the hand movement are acquired by markers of a magnetic tracking system [6]. Observing humans movements we perform a learning phase using histogram techniques. Based on the learning phase is possible classify reach-to-grasp movements applying Bayes rule to recognize the way that a human grasps an object by continuous classification based on multiplicative updates of beliefs. We are classifying the hand trajectory by its curvatures and by hand orientation along the trajectory individually. Both results are compared after some trials to verify the best classification between these two kinds of segmentation. Using entropy as confidence level, we can give weights for each kind of classification to combine both, acquiring a new classification for results comparison. Using these techniques we developed an application to estimate and classify two possible types of grasping by the reach-to-grasp movements performed by humans. These reported steps are important to understand some human behaviors before the object manipulation and can be used to endow a robot with autonomous capabilities (e.g. reaching objects for handling)., This work is partially supported by the European project HANDLE ICT23-16-40. Diego Faria is supported by Portuguese Foundation for Science and Technology.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Contribución de congreso (ConferenceOutput)

Prioritized independent contact regions for form closure grasps

  • Krug, Robert
  • Dimitrov, Dimitar
  • Charusta, Krzysztof
  • Iliev, Boyko
Proceedings of: 2011 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS'11), September 25-30, 2011, San Francisco, USA, The concept of independent contact regions on a target object’s surface, in order to compensate for shortcomings in the positioning accuracy of robotic grasping devices, is well known. However, the numbers and distributions of contact points forming such regions is not unique and depends on the underlying computational method. In this work we present a computation scheme allowing to prioritize contact points for inclusion in the independent regions. This enables a user to affect their shape in order to meet the demands of the targeted application. The introduced method utilizes frictionless contact constraints and is able to efficiently approximate the space of disturbances resistible by all grasps comprising contacts within the independent regions., This research has been partially supported by the HANDLE project, funded by the European Community’s Seventh Framework Programme (FP7/2007-2013) under grant agreement ICT 231640.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Contribución de congreso (ConferenceOutput)

Miniaturized triaxial optical fiber force sensor for MRI-guided minimally invasive surgery

  • Puangmali, Pinyo
  • Dasgupta, Prokar
  • Seneviratne, Lakmal D.
  • Althoefer, Kaspar
Proceedings of: 2010 IEEE International Conference on Robotics and Automation (ICRA'10), May 3-8, 2010, Anchorage (Alaska, USA), This paper describes the design and construction of a miniaturized triaxial force sensor which can be applied inside a magnetic resonance imaging (MRI) machine. The sensing principle of the sensor is based on an optical intensity modulation mechanism that utilizes bent-tip optical fibers to measure the deflection of a compliant platform when exposed to a force. By measuring the deflection of the platform using this optical approach, the magnitude and direction of three orthogonal force components (Fx, Fy, and Fz) can be determined. The sensor prototype described in this paper demonstrates that it can perform force measurements in axial and radial directions with working ranges of +/- 2 N. Since the sensor is small in size and entirely made of nonmetallic materials, it is compatible with minimally invasive surgery (MIS) and safe to be deployed within magnetic resonance (MR) environments., The research leading to these results has received funding from the European Community’s Seventh Framework Programme (FP7/2007-2013) under Grant Agreement No. 231640.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Contribución de congreso (ConferenceOutput)

Grasping movements recognition in 3D space using a bayesian approach

  • Faria, Diego R.
  • Aliakbarpour, Hadi
  • Dias, Jorge
Proceedings of: 14th International Conference on Advanced Robotics (ICAR 2009), 22-26 June 2009, Munich (Germany), In this work we present grasping movements recognition in 3D space. We also present the idea of a database of different sensors data for different scenarios of grasping and handling tasks for our future works. Multi-sensor information for grasp tasks require sensors calibration and synchronized data with timestamp that we start to develop to share with the researches of this area. In the scenario presented in this work we are performing the grasp recognition combining 2 different types of features from the reach-to-grasp movement. Observing the reach-to-grasp movements of different subjects we perform a learning phase based on histogram using the segmentation data. Based on a learning phase is possible to recognize the grasping movements applying Bayes rule by continuous classification based on multiplicative updates of beliefs. We developed an automated system to estimate and recognize two possible types of grasping by the hand movements performed by humans that are tracked by a magnetic tracking device. These reported steps are important to understand some human behaviors before the object manipulation and can be used to endow a robot with autonomous capabilities, like showing how to reach some object for manipulation or object displacement., This work is partially supported by the European project Handle ICT-23-16-40.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Contribución de congreso (ConferenceOutput)

Multi sensor fusion of camera and 3D laser range finder for object recognition

  • Klimentjew, Denis
  • Hendrich, Norman
  • Zhang, Jianwei
Proceedings of: 2010 IEEE Conference on Multisensor Fusion and Integration for Intelligent Systems (MFI), September 5-7, 2010, Salt Lake City, USA, This paper proposes multi sensor fusion based on an effective calibration method for a perception system designed for mobile robots and intended for later object recognition. The perception system consists of a camera and a three-dimensional laser range finder. The three-dimensional laser range finder is based on a two-dimensional laser scanner and a pan-tilt unit as a moving platform. The calibration permits the coalescence of the two most important sensors for three-dimensional environment perception, namely a laser scanner and a camera. Both sensors permit multi sensor fusion consisting of color and depth information. The calibration process based upon a specific calibration pattern is used to define the extrinsic parameters and calculate the transformation between a laser range finder and a camera. The found transformation assigns an exact position and the color information to each point of the surroundings. As a result, the advantages of both sensors can be combined. The resulting structure consists of colored unorganized point clouds. The achieved results can be visualized with OpenGL and used for surface reconstruction. This way, typical robotic tasks like object recognition, grasp calculation or handling of objects can be realized. The results of our experiments are presented in this paper., This work is partially supported by the EU-funded project HANDLE ICT-23-16-40.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Cooperative tasks between humans and robots in industrial environments

  • Corrales Ramón, Juan Antonio
  • Garcia, Gabriel J.
  • Torres, Fernando
  • Perdereau, Véronique
  • Garcia, Gabriel J.|||/items/2b8f4866-a3e0-4391-adb2-de533e354ac1
  • Torres, Fernando|||/items/17ced7cb-5c1d-429d-b922-315f91fddc33
Collaborative tasks between human operators and robotic manipulators can improve the performance and flexibility of industrial environments. Nevertheless, the safety of humans should always be guaranteed and the behaviour of the robots should be modified when a risk of collision may happen. This paper presents the research that the authors have performed in recent years in order to develop a human-robot interaction system which guarantees human safety by precisely tracking the complete body of the human and by activating safety strategies when the distance between them is too small. This paper not only summarizes the techniques which have been implemented in order to develop this system, but it also shows its application in three real human-robot interaction tasks.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Finger readjustment algorithm for object manipulation based on tactile information

  • Corrales Ramón, Juan Antonio
  • Torres, Fernando
  • Perdereau, Véronique
  • Torres, Fernando|||/items/17ced7cb-5c1d-429d-b922-315f91fddc33
This paper presents a novel algorithm which registers pressure information from tactile sensors installed over the fingers of a robotic hand in order to perform manipulation tasks with objects. This algorithm receives as an input the joint trajectories of the fingers which have to be executed and adapts it to the real contact pressure of each finger in order to guarantee that undesired slippage or contact‐breaking is avoided during the execution of the manipulation task. This algorithm has been applied not only for the manipulation of normal rigid bodies but also for bodies whose centre of mass can be changed during the execution of the manipulation task.