Pasar al contenido principal

MANIPULACION DE OBJETOS EN ENTORNOS NO ESTRUCTURADOS MEDIANTE TECNICAS DE CONTROL VISUAL Y COOPERACION ROBOTICA

DPI2011-22766

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2011
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSIDAD DE ALICANTE
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Cámara Virtual de Referencia: Una Aproximación para el Guiado Combinado de Robots Manipuladores mediante una Única Cámara, Reference Virtual Camera: An approach to guide several manipulator robots using only one camera

  • Pomares, J.
  • García, G.J.
  • Perea, I.
  • Jara, C.
  • Torres, F.
[EN] This paper presents the modeling, design and visual control of a 3 degrees of freedom joint structure with an eye-in-hand camera. For the structure guidance, the paper presents a new direct visual servoing strategy that allows the tracking of time-independent paths defined in the image space. This joint structure is attached at the end of a robotic manipulator Mitsubishi PA-10. This last robot will be applied to manipulation tasks in which a fixed camera cannot be used. To avoid this problem, the joint structure positions the camera following the path previously established that provides a proper visualization of the task. The defined control strategy is able, not only to make the guidance of the joint structure, but also to guide the robot manipulator using the extracted visual features. To do this, we have defined the concept of virtual reference camera, which simulates a real camera at the end of the manipulator. This virtual camera allows the manipulator guidance by using a classical image based visual servoing system., [ES] En este artículo se presenta el modelado, diseño y control visual de una estructura articular de 3 grados de libertad que dispone de una cámara en su extremo. Para su guiado se presenta una nueva estrategia de control visual directo que permite realizar el seguimiento de caminos o trayectorias no dependientes del tiempo definidas en el espacio de la imagen. Esta estructura articular a su vez se encuentra fijada al extremo de un robot manipulador Mitsubishi PA-10. Este último robot se desea aplicar a tareas de manipulación en las que no se puede emplear una cámara fija, ya que las necesidades de visualización dependen de la tarea. Para evitar este problema, la estructura articular posiciona la cámara, siguiendo la trayectoria previamente establecida que proporciona una visualización correcta de la tarea. La estrategia de control definida es capaz, no sólo de realizar el guiado de la estructura articular, sino también de guiar al robot manipulador haciendo uso de las características visuales extraídas. Para conseguir esto último se ha definido el concepto de cámara virtual de referencia, que simulando una cámara real ubicada en el extremo del manipulador, permite realizar su guiado mediante un sistema de control visual clásico basado en imagen., Este trabajo está financiado por el Ministerio de Educación y Ciencia (Proyecto DPI2011-22766).
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Cooperative tasks between humans and robots in industrial environments

  • Corrales Ramón, Juan Antonio
  • Garcia, Gabriel J.
  • Torres, Fernando
  • Perdereau, Véronique
  • Garcia, Gabriel J.|||/items/2b8f4866-a3e0-4391-adb2-de533e354ac1
  • Torres, Fernando|||/items/17ced7cb-5c1d-429d-b922-315f91fddc33
Collaborative tasks between human operators and robotic manipulators can improve the performance and flexibility of industrial environments. Nevertheless, the safety of humans should always be guaranteed and the behaviour of the robots should be modified when a risk of collision may happen. This paper presents the research that the authors have performed in recent years in order to develop a human-robot interaction system which guarantees human safety by precisely tracking the complete body of the human and by activating safety strategies when the distance between them is too small. This paper not only summarizes the techniques which have been implemented in order to develop this system, but it also shows its application in three real human-robot interaction tasks.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Dynamic visual servo control of a 4-axis joint tool to track image trajectories during machining complex shapes

  • Pomares, Jorge
  • Perea Fuentes, Iván
  • Jara, Carlos A.
  • Garcia, Gabriel J.
  • Torres, Fernando
  • Garcia, Gabriel J.|||/items/2b8f4866-a3e0-4391-adb2-de533e354ac1
  • Jara, Carlos A.|||/items/387c7e81-c049-4b46-b137-71b2825b3d93
  • Pomares, Jorge|||/items/b8d02261-9eb2-42fe-852a-91646a1259c4
  • Torres, Fernando|||/items/17ced7cb-5c1d-429d-b922-315f91fddc33
A large part of the new generation of computer numerical control systems has adopted an architecture based on robotic systems. This architecture improves the implementation of many manufacturing processes in terms of flexibility, efficiency, accuracy and velocity. This paper presents a 4-axis robot tool based on a joint structure whose primary use is to perform complex machining shapes in some non-contact processes. A new dynamic visual controller is proposed in order to control the 4-axis joint structure, where image information is used in the control loop to guide the robot tool in the machining task. In addition, this controller eliminates the chaotic joint behavior which appears during tracking of the quasi-repetitive trajectories required in machining processes. Moreover, this robot tool can be coupled to a manipulator robot in order to form a multi-robot platform for complex manufacturing tasks. Therefore, the robot tool could perform a machining task using a piece grasped from the workspace by a manipulator robot. This manipulator robot could be guided by using visual information given by the robot tool, thereby obtaining an intelligent multi-robot platform controlled by only one camera.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

A Multi-Sensorial Hybrid Control for Robotic Manipulation in Human-Robot Workspaces

  • Pomares, Jorge
  • Perea Fuentes, Iván
  • Garcia, Gabriel J.
  • Jara, Carlos A.
  • Corrales Ramón, Juan Antonio
  • Torres, Fernando
  • Garcia, Gabriel J.|||/items/2b8f4866-a3e0-4391-adb2-de533e354ac1
  • Jara, Carlos A.|||/items/387c7e81-c049-4b46-b137-71b2825b3d93
  • Pomares, Jorge|||/items/b8d02261-9eb2-42fe-852a-91646a1259c4
  • Torres, Fernando|||/items/17ced7cb-5c1d-429d-b922-315f91fddc33
Autonomous manipulation in semi-structured environments where human operators can interact is an increasingly common task in robotic applications. This paper describes an intelligent multi-sensorial approach that solves this issue by providing a multi-robotic platform with a high degree of autonomy and the capability to perform complex tasks. The proposed sensorial system is composed of a hybrid visual servo control to efficiently guide the robot towards the object to be manipulated, an inertial motion capture system and an indoor localization system to avoid possible collisions between human operators and robots working in the same workspace, and a tactile sensor algorithm to correctly manipulate the object. The proposed controller employs the whole multi-sensorial system and combines the measurements of each one of the used sensors during two different phases considered in the robot task: a first phase where the robot approaches the object to be grasped, and a second phase of manipulation of the object. In both phases, the unexpected presence of humans is taken into account. This paper also presents the successful results obtained in several experimental setups which verify the validity of the proposed approach.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

RASMA: plataforma para la creación de animaciones Stop-motion con asistencia robótica

  • Cuenca, David
  • Perea Fuentes, Iván
  • Garcia, Gabriel J.
  • Pomares, Jorge
  • Torres, Fernando
  • Garcia, Gabriel J.|||/items/2b8f4866-a3e0-4391-adb2-de533e354ac1
  • Pomares, Jorge|||/items/b8d02261-9eb2-42fe-852a-91646a1259c4
  • Torres, Fernando|||/items/17ced7cb-5c1d-429d-b922-315f91fddc33
En este artículo se describe el concepto de plataforma RASMA, Robot-Assisted Stop-Motion Animation, cuya finalidd es facilitar la tarea de generar los fotogramas necesarios para crear una secuencia animada en 2D. Se describen tanto la generación de trayectorias que deben seguir los objetos (en Unity 3D o en Adobe Flash Player), como la exportación/importación de los ficheros de datos en XML, la planificación de las trayectorias del robot, la toma de fotogramas y el ensamblado final de toda la secuencia.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Dynamic Visual Servoing With Chaos Control for Redundant Robots

  • Pomares, Jorge
  • Perea Fuentes, Iván
  • Torres, Fernando
  • Pomares, Jorge|||/items/b8d02261-9eb2-42fe-852a-91646a1259c4
  • Torres, Fernando|||/items/17ced7cb-5c1d-429d-b922-315f91fddc33
This paper presents a new dynamic visual control system for redundant robots with chaos compensation. In order to implement the visual servoing system, a new architecture is proposed that improves the system maintainability and traceability. Furthermore, high performance is obtained as a result of parallel execution of the different tasks that compose the architecture. The control component of the architecture implements a new visual servoing technique for resolving the redundancy at the acceleration level in order to guarantee the correct motion of both end-effector and joints. The controller generates the required torques for the tracking of image trajectories. However, in order to guarantee the applicability of this technique, a repetitive path tracked by the robot-end must produce a periodic joint motion. A chaos controller is integrated in the visual servoing system and the correct performance is observed in low and high velocities. Furthermore, a method to adjust the chaos controller is proposed and validated using a real three-link robot.