Pasar al contenido principal

MANIPULACION DIESTRA DE OBJETOS RIGIDOS Y ELASTICOS CON GUIADO MEDIANTE CONTROL VISUAL-TACTIL-FUERZA

DPI2012-32390

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2012
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Secretaría de Estado de Investigación, Desarrollo e Innovación
Centro beneficiario UNIVERSIDAD DE ALICANTE
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 19
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Calibración de cámaras de tiempo de vuelo: Ajuste adaptativo del tiempo de integración y análisis de la frecuencia de modulación, ToF Camera calibration: an automatic setting of its integration time and an experimental analysis of its modulation frequency

  • Gil, P.
  • Kisler, T.
  • García, G.J.
  • Jara, C.A.
  • Corrales, J.A.
[ES] La percepción de profundidad se hace imprescindible en muchas tareas de manipulación, control visual y navegación de robots. Las cámaras de tiempo de vuelo (ToF: Time of Flight) generan imágenes de rango que proporcionan medidas de profundidad en tiempo real. No obstante, el parámetro distancia que calculan estas cámaras es fuertemente dependiente del tiempo de integración que se configura en el sensor y de la frecuencia de modulación empleada por el sistema de iluminación que integran. En este artículo, se presenta una metodología para el ajuste adaptativo del tiempo de integración y un análisis experimental del comportamiento de una cámara ToF cuando se modifica la frecuencia de modulación. Este método ha sido probado con éxito en algoritmos de control visual con arquitectura ‘eye-in-hand’ donde el sistema sensorial está compuesto por una cámara ToF. Además, la misma metodología puede ser aplicada en otros escenarios de trabajo., [EN] The depth perception is essential in many manipulation tasks, visual inspection and robot navigation. The cameras of Time of Flight (TOF) generate range images which provide depth measurements in real time. However, the distance parameter computed from these cameras is strongly dependent on the integration time set for the sensor and the frequency of modulation used by the integrated lighting system. In this paper, a methodology for automatic setting of integration time and an experimental analysis of ToF camera behavior adjusting its modulation frequency is presented. This method has been successfully tested on visual servoing algorithms with architecture ‘eye-in-hand’ in which the sensory system consists of a ToF camera, in addition this methodology can be applied to other workspaces and scenarios., Este trabajo ha sido co-financiado por el Gobierno regional de la Generalitat Valenciana, Universidad de Alicante y CICYT través de los proyectos GV2012/102, GRE10-16 y DPI2012-32390.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Detección de deformaciones 3D calculando esqueletos de curvaturas

  • Mateo Agulló, Carlos
  • Gil, Pablo
  • Torres, Fernando
  • Gil, Pablo|||/items/bb6cdca6-1fdd-44c0-a64a-6e328dbb74e9
  • Torres, Fernando|||/items/17ced7cb-5c1d-429d-b922-315f91fddc33
El artículo presenta un método de análisis 3D para medir la variación en superficies planas. El método está orientado a la detección de deformaciones elásticas en objetos formados por superficies planas. Estas deformaciones son causadas habitualmente cuando dos cuerpos, uno sólido y otro elástico, intersectan, generando una presión de contacto entre sus caras. El método describe una estrategia para modelar la forma de las deformaciones, usando una aproximación matemática basada principalmente en dos conceptos: Histograma y Mapa de Curvatura. En concreto se describe el algoritmo encargado de la detección de deformaciones, con el objetivo de realizar tareas de control visual e inspecciones para el proceso de manipulado con manos robóticas. Los resultados de varios experimentos se muestran de tal forma que se logra evaluar la validez y robustez del método para detectar y medir deformaciones en tareas de agarre. Para realizar estos experimentos, varias escenas virtuales fueron creadas con el fin de simular el contacto entre los dedos de una mano robot y un objeto elástico.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

In-hand recognition and manipulation of elastic objects using a servo-tactile control strategy

  • Delgado Rodríguez, Ángel
  • Jara, Carlos A.
  • Torres, Fernando
  • Jara, Carlos A.|||/items/387c7e81-c049-4b46-b137-71b2825b3d93
  • Torres, Fernando|||/items/17ced7cb-5c1d-429d-b922-315f91fddc33
Grasping and manipulating objects with robotic hands depend largely on the features of the object to be used. Especially, features such as softness and deformability are crucial to take into account during the manipulation tasks. Indeed, positions of the fingers and forces to be applied by the robot hand when manipulating an object must be adapted to the caused deformation. For unknown objects, a previous recognition stage is usually needed to get the features of the object, and the manipulation strategies must be adapted depending on that recognition stage. To obtain a precise control in the manipulation task, a complex object model is usually needed and performed, for example using the Finite Element Method. However, these models require a complete discretization of the object and they are time-consuming for the performance of the manipulation tasks. For that reason, in this paper a new control strategy, based on a minimal spring model of the objects, is presented and used for the control of the robot hand. This paper also presents an adaptable tactile-servo control scheme that can be used in in-hand manipulation tasks of deformable objects. Tactile control is based on achieving and maintaining a force value at the contact points which changes according to the object softness, a feature estimated in an initial recognition stage.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Analysis of Shapes to Measure Surfaces: An Approach for Detection of Deformations

  • Mateo Agulló, Carlos
  • Gil, Pablo
  • Mira Martínez, Damián
  • Torres, Fernando
  • Gil, Pablo|||/items/bb6cdca6-1fdd-44c0-a64a-6e328dbb74e9
  • Torres, Fernando|||/items/17ced7cb-5c1d-429d-b922-315f91fddc33
This paper presents a method to analyse 3D planar surfaces and to measure variations on it. The method is oriented to the detection of deformations on the elastic object surfaces formed by flat faces. These deformations are usually caused when two bodies, a solid and another elastic object, come in contact and there are contact pressures among their faces. Our method describes a strategy to model the shape of deformation using a mathematical approach based on two concepts: Histogram and Map of curvature. In particular, we describe the algorithm for deformations in order to use it in visual control and inspection tasks for manipulation processes with robot hands. Several experiments and their results are shown to evaluate the validity and robustness of the method to detect and measure deformations in grasping tasks. To do it, some virtual scenarios were created to simulate contacts with fingers of a hand robot.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

A Survey on FPGA-Based Sensor Systems: Towards Intelligent and Reconfigurable Low-Power Sensors for Computer Vision, Control and Signal Processing

  • Garcia, Gabriel J.
  • Jara, Carlos A.
  • Pomares, Jorge
  • Alabdo, Aiman
  • Poggi, Lucas M.
  • Torres, Fernando
  • Alabdo, Aiman|||/items/38f3d4d5-0114-46ac-a065-523410a92777
  • Garcia, Gabriel J.|||/items/2b8f4866-a3e0-4391-adb2-de533e354ac1
  • Jara, Carlos A.|||/items/387c7e81-c049-4b46-b137-71b2825b3d93
  • Pomares, Jorge|||/items/b8d02261-9eb2-42fe-852a-91646a1259c4
  • Torres, Fernando|||/items/17ced7cb-5c1d-429d-b922-315f91fddc33
The current trend in the evolution of sensor systems seeks ways to provide more accuracy and resolution, while at the same time decreasing the size and power consumption. The use of Field Programmable Gate Arrays (FPGAs) provides specific reprogrammable hardware technology that can be properly exploited to obtain a reconfigurable sensor system. This adaptation capability enables the implementation of complex applications using the partial reconfigurability at a very low-power consumption. For highly demanding tasks FPGAs have been favored due to the high efficiency provided by their architectural flexibility (parallelism, on-chip memory, etc.), reconfigurability and superb performance in the development of algorithms. FPGAs have improved the performance of sensor systems and have triggered a clear increase in their use in new fields of application. A new generation of smarter, reconfigurable and lower power consumption sensors is being developed in Spain based on FPGAs. In this paper, a review of these developments is presented, describing as well the FPGA technologies employed by the different research groups and providing an overview of future research within this field.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Control and Guidance of Low-Cost Robots via Gesture Perception for Monitoring Activities in the Home

  • Sempere, Angel D.
  • Serna-Leon, Arturo
  • Gil, Pablo
  • Puente Méndez, Santiago T.
  • Torres, Fernando
  • Gil, Pablo|||/items/bb6cdca6-1fdd-44c0-a64a-6e328dbb74e9
  • Puente Méndez, Santiago T.|||/items/b02d19c1-e93f-45cd-9367-7c228d585248
  • Torres, Fernando|||/items/17ced7cb-5c1d-429d-b922-315f91fddc33
This paper describes the development of a low-cost mini-robot that is controlled by visual gestures. The prototype allows a person with disabilities to perform visual inspections indoors and in domestic spaces. Such a device could be used as the operator's eyes obviating the need for him to move about. The robot is equipped with a motorised webcam that is also controlled by visual gestures. This camera is used to monitor tasks in the home using the mini-robot while the operator remains quiet and motionless. The prototype was evaluated through several experiments testing the ability to use the mini-robot’s kinematics and communication systems to make it follow certain paths. The mini-robot can be programmed with specific orders and can be tele-operated by means of 3D hand gestures to enable the operator to perform movements and monitor tasks from a distance.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Active Visual Features Based on Events to Guide Robot Manipulators in Tracking Tasks

  • Gil, Pablo
  • Garcia, Gabriel J.
  • Mateo Agulló, Carlos
  • Torres, Fernando
  • Garcia, Gabriel J.|||/items/2b8f4866-a3e0-4391-adb2-de533e354ac1
  • Gil, Pablo|||/items/bb6cdca6-1fdd-44c0-a64a-6e328dbb74e9
  • Torres, Fernando|||/items/17ced7cb-5c1d-429d-b922-315f91fddc33
Traditional visual servoing systems do not deal with the topic of moving objects tracking. When these systems are employed to track a moving object, depending on the object velocity, visual features can go out of the image, causing the fail of the tracking task. This occurs specially when the object and the robot are both stopped and then the object starts the movement. In this work, we have employed a retina camera based on Address Event Representation (AER) in order to use events as input in the visual servoing system. The events launched by the camera indicate a pixel movement. Event visual information is processed only at the moment it occurs, reducing the response time of visual servoing systems when they are used to track moving objects.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

A Performance Evaluation of Surface Normals-Based Descriptors for Recognition of Objects using CAD-Models

  • Mateo Agulló, Carlos
  • Gil, Pablo
  • Torres, Fernando
  • Gil, Pablo|||/items/bb6cdca6-1fdd-44c0-a64a-6e328dbb74e9
  • Torres, Fernando|||/items/17ced7cb-5c1d-429d-b922-315f91fddc33
This paper describes a study and analysis of surface normal-base descriptors for 3D object recognition. Specifically, we evaluate the behaviour of descriptors in the recognition process using virtual models of objects created from CAD software. Later, we test them in real scenes using synthetic objects created with a 3D printer from the virtual models. In both cases, the same virtual models are used on the matching process to find similarity. The difference between both experiments is in the type of views used in the tests. Our analysis evaluates three subjects: the effectiveness of 3D descriptors depending on the viewpoint of camera, the geometry complexity of the model and the runtime used to do the recognition process and the success rate to recognize a view of object among the models saved in the database.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

3D visual sensing of human hand for remote operation of a robotic hand

  • Gil, Pablo
  • Mateo Agulló, Carlos
  • Torres, Fernando
  • Gil, Pablo|||/items/bb6cdca6-1fdd-44c0-a64a-6e328dbb74e9
  • Torres, Fernando|||/items/17ced7cb-5c1d-429d-b922-315f91fddc33
New low cost sensors and open free libraries for 3D image processing are making important advances in robot vision applications possible, such as three-dimensional object recognition, semantic mapping, navigation and localization of robots, human detection and/or gesture recognition for human-machine interaction. In this paper, a novel method for recognizing and tracking the fingers of a human hand is presented. This method is based on point clouds from range images captured by a RGBD sensor. It works in real time and it does not require visual marks, camera calibration or previous knowledge of the environment. Moreover, it works successfully even when multiple objects appear in the scene or when the ambient light is changed. Furthermore, this method was designed to develop a human interface to control domestic or industrial devices, remotely. In this paper, the method was tested by operating a robotic hand. Firstly, the human hand was recognized and the fingers were detected. Secondly, the movement of the fingers was analysed and mapped to be imitated by a robotic hand.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Dynamic visual servo control of a 4-axis joint tool to track image trajectories during machining complex shapes

  • Pomares, Jorge
  • Perea Fuentes, Iván
  • Jara, Carlos A.
  • Garcia, Gabriel J.
  • Torres, Fernando
  • Garcia, Gabriel J.|||/items/2b8f4866-a3e0-4391-adb2-de533e354ac1
  • Jara, Carlos A.|||/items/387c7e81-c049-4b46-b137-71b2825b3d93
  • Pomares, Jorge|||/items/b8d02261-9eb2-42fe-852a-91646a1259c4
  • Torres, Fernando|||/items/17ced7cb-5c1d-429d-b922-315f91fddc33
A large part of the new generation of computer numerical control systems has adopted an architecture based on robotic systems. This architecture improves the implementation of many manufacturing processes in terms of flexibility, efficiency, accuracy and velocity. This paper presents a 4-axis robot tool based on a joint structure whose primary use is to perform complex machining shapes in some non-contact processes. A new dynamic visual controller is proposed in order to control the 4-axis joint structure, where image information is used in the control loop to guide the robot tool in the machining task. In addition, this controller eliminates the chaotic joint behavior which appears during tracking of the quasi-repetitive trajectories required in machining processes. Moreover, this robot tool can be coupled to a manipulator robot in order to form a multi-robot platform for complex manufacturing tasks. Therefore, the robot tool could perform a machining task using a piece grasped from the workspace by a manipulator robot. This manipulator robot could be guided by using visual information given by the robot tool, thereby obtaining an intelligent multi-robot platform controlled by only one camera.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Guidance of robot arms using depth data from RGB-D camera

  • Garcia, Gabriel J.
  • Gil, Pablo
  • Llácer, David
  • Torres, Fernando
  • Garcia, Gabriel J.|||/items/2b8f4866-a3e0-4391-adb2-de533e354ac1
  • Gil, Pablo|||/items/bb6cdca6-1fdd-44c0-a64a-6e328dbb74e9
  • Torres, Fernando|||/items/17ced7cb-5c1d-429d-b922-315f91fddc33
Image Based Visual Servoing (IBVS) is a robotic control scheme based on vision. This scheme uses only the visual information obtained from a camera to guide a robot from any robot pose to a desired one. However, IBVS requires the estimation of different parameters that cannot be obtained directly from the image. These parameters range from the intrinsic camera parameters (which can be obtained from a previous camera calibration), to the measured distance on the optical axis between the camera and visual features, it is the depth. This paper presents a comparative study of the performance of D-IBVS estimating the depth from three different ways using a low cost RGB-D sensor like Kinect. The visual servoing system has been developed over ROS (Robot Operating System), which is a meta-operating system for robots. The experiments prove that the computation of the depth value for each visual feature improves the system performance.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Direct Visual Servoing Framework based on Optimal Control for Redundant Joint Structures

  • Pomares, Jorge
  • Jara, Carlos A.
  • Pérez Alepuz, Javier
  • Torres, Fernando
  • Jara, Carlos A.|||/items/387c7e81-c049-4b46-b137-71b2825b3d93
  • Pomares, Jorge|||/items/b8d02261-9eb2-42fe-852a-91646a1259c4
  • Torres, Fernando|||/items/17ced7cb-5c1d-429d-b922-315f91fddc33
This paper presents a new framework based on optimal control to define new dynamic visual controllers to carry out the guidance of any serial link structure. The proposed general method employs optimal control to obtain the desired behaviour in the joint space based on an indicated cost function which determines how the control effort is distributed over the joints. The proposed approach allows the development of new direct visual controllers for any mechanical joint system with redundancy. Finally, authors show experimental results and verifications on a real robotic system for some derived controllers obtained from the control framework.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Optimal control for robot-hand manipulation of an object using dynamic visual servoing

  • Jara, Carlos A.
  • Pomares, Jorge
  • Candelas-Herías, Francisco A.
  • Torres, Fernando
  • Jara, Carlos A.|||/items/387c7e81-c049-4b46-b137-71b2825b3d93
  • Pomares, Jorge|||/items/b8d02261-9eb2-42fe-852a-91646a1259c4
  • Candelas-Herías, Francisco A.|||/items/d4ce6549-c436-439d-ab35-c08c9c4398c2
  • Torres, Fernando|||/items/17ced7cb-5c1d-429d-b922-315f91fddc33
This paper presents a novel control approach to dynamic visual servo control multi-fingered robotic hands for the manipulation performance of an object. The control approach allows the path tracking of the object motion by means of visual information and takes into account both the dynamics model of the robot hand and the grasping force of the fingertips. In addition, an optimal approach is employed to obtain the desired behaviour in the joint space based on an indicated cost function which determines how the control effort is distributed over the robot fingers’ joints. Finally, authors show experimental verifications on a robotic manipulation system for some of the visual servo controllers derived from the control approach.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Calibración de cámaras de tiempo de vuelo: ajuste adaptativo del tiempo de integración y análisis de la frecuencia de modulación, ToF Camera calibration: an automatic setting of its integration time and an experimental analysis of its modulation frequency

  • Gil, Pablo
  • Kisler, Thomas
  • Garcia, Gabriel J.
  • Jara, Carlos A.
  • Corrales Ramón, Juan Antonio
  • Garcia, Gabriel J.|||/items/2b8f4866-a3e0-4391-adb2-de533e354ac1
  • Gil, Pablo|||/items/bb6cdca6-1fdd-44c0-a64a-6e328dbb74e9
  • Jara, Carlos A.|||/items/387c7e81-c049-4b46-b137-71b2825b3d93
La percepción de profundidad se hace imprescindible en muchas tareas de manipulación, control visual y navegación de robots. Las cámaras de tiempo de vuelo (ToF: Time of Flight) generan imágenes de rango que proporcionan medidas de profundidad en tiempo real. No obstante, el parámetro distancia que calculan estas cámaras es fuertemente dependiente del tiempo de integración que se configura en el sensor y de la frecuencia de modulación empleada por el sistema de iluminación que integran. En este artículo, se presenta una metodología para el ajuste adaptativo del tiempo de integración y un análisis experimental del comportamiento de una cámara ToF cuando se modifica la frecuencia de modulación. Este método ha sido probado con éxito en algoritmos de control visual con arquitectura ‘eye-in-hand’ donde el sistema sensorial está compuesto por una cámara ToF. Además, la misma metodología puede ser aplicada en otros escenarios de trabajo.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Control framework for dexterous manipulation using dynamic visual servoing and tactile sensors’ feedback

  • Jara, Carlos A.
  • Pomares, Jorge
  • Candelas-Herías, Francisco A.
  • Torres, Fernando
  • Candelas-Herías, Francisco A.|||/items/d4ce6549-c436-439d-ab35-c08c9c4398c2
  • Jara, Carlos A.|||/items/387c7e81-c049-4b46-b137-71b2825b3d93
  • Pomares, Jorge|||/items/b8d02261-9eb2-42fe-852a-91646a1259c4
  • Torres, Fernando|||/items/17ced7cb-5c1d-429d-b922-315f91fddc33
Tactile sensors play an important role in robotics manipulation to perform dexterous and complex tasks. This paper presents a novel control framework to perform dexterous manipulation with multi-fingered robotic hands using feedback data from tactile and visual sensors. This control framework permits the definition of new visual controllers which allow the path tracking of the object motion taking into account both the dynamics model of the robot hand and the grasping force of the fingertips under a hybrid control scheme. In addition, the proposed general method employs optimal control to obtain the desired behaviour in the joint space of the fingers based on an indicated cost function which determines how the control effort is distributed over the joints of the robotic hand. Finally, authors show experimental verifications on a real robotic manipulation system for some of the controllers derived from the control framework.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Event-based visual servoing

  • Garcia, Gabriel J.
  • Pomares, Jorge
  • Torres, Fernando
  • Gil, Pablo
  • Garcia, Gabriel J.|||/items/2b8f4866-a3e0-4391-adb2-de533e354ac1
  • Gil, Pablo|||/items/bb6cdca6-1fdd-44c0-a64a-6e328dbb74e9
  • Pomares, Jorge|||/items/b8d02261-9eb2-42fe-852a-91646a1259c4
  • Torres, Fernando|||/items/17ced7cb-5c1d-429d-b922-315f91fddc33
Traditional visual servoing systems have been widely studied in the last years. These systems control the position of the camera attached to the robot end-effector guiding it from any position to the desired one. These controllers can be improved by using the event-based control paradigm. The system proposed in this paper is based on the idea of activating the visual controller only when something significant has occurred in the system (e.g. when any visual feature can be loosen because it is going outside the frame). Different event triggers have been defined in the image space in order to activate or deactivate the visual controller. The tests implemented to validate the proposal have proved that this new scheme avoids visual features to go out of the image whereas the system complexity is reduced considerably. Events can be used in the future to change different parameters of the visual servoing systems.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Dynamic Visual Servoing With Chaos Control for Redundant Robots

  • Pomares, Jorge
  • Perea Fuentes, Iván
  • Torres, Fernando
  • Pomares, Jorge|||/items/b8d02261-9eb2-42fe-852a-91646a1259c4
  • Torres, Fernando|||/items/17ced7cb-5c1d-429d-b922-315f91fddc33
This paper presents a new dynamic visual control system for redundant robots with chaos compensation. In order to implement the visual servoing system, a new architecture is proposed that improves the system maintainability and traceability. Furthermore, high performance is obtained as a result of parallel execution of the different tasks that compose the architecture. The control component of the architecture implements a new visual servoing technique for resolving the redundancy at the acceleration level in order to guarantee the correct motion of both end-effector and joints. The controller generates the required torques for the tracking of image trajectories. However, in order to guarantee the applicability of this technique, a repetitive path tracked by the robot-end must produce a periodic joint motion. A chaos controller is integrated in the visual servoing system and the correct performance is observed in low and high velocities. Furthermore, a method to adjust the chaos controller is proposed and validated using a real three-link robot.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Event-based visual servoing with features’ prediction

  • Garcia, Gabriel J.
  • Pomares, Jorge
  • Torres, Fernando
  • Gil, Pablo
  • Garcia, Gabriel J.|||/items/2b8f4866-a3e0-4391-adb2-de533e354ac1
  • Gil, Pablo|||/items/bb6cdca6-1fdd-44c0-a64a-6e328dbb74e9
  • Pomares, Jorge|||/items/b8d02261-9eb2-42fe-852a-91646a1259c4
  • Torres, Fernando|||/items/17ced7cb-5c1d-429d-b922-315f91fddc33
Event-based visual servoing is a recently presented approach that performs the positioning of a robot using visual information only when it is required. From the basis of the classical image-based visual servoing control law, the scheme proposed in this paper can reduce the processing time at each loop iteration in some specific conditions. The proposed control method enters in action when an event deactivates the classical image-based controller (i.e. when there is no image available to perform the tracking of the visual features). A virtual camera is then moved through a straight line path towards the desired position. The virtual path used to guide the robot improves the behavior of the previous event-based visual servoing proposal.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Computation of Curvature Skeleton to Measure Deformations in Surfaces

  • Mateo Agulló, Carlos
  • Gil, Pablo
  • Torres, Fernando
  • Gil, Pablo|||/items/bb6cdca6-1fdd-44c0-a64a-6e328dbb74e9
  • Torres, Fernando|||/items/17ced7cb-5c1d-429d-b922-315f91fddc33
This work presents a method to analyse 3D flat objects and to measure variations of its surface. The method represents of the objects using processsing techniques based on point cloud. The proposed method is focused on the deformation detection of elastic objects which are formed by flat faces. These deformations are usually caused when two bodies, a solid and another elastic object, come in contact and there are contact pressures among their faces. Our method describes an algorithm to estimate the deformation shape. It is done by calculating its skeleton. Particularly, the algorithm calculates the curvature values of the surface points on the object using an analysis of eigenvectors and eigenvalues. Afterwards, the points of the similar curvature are grouped in level curvatures. Finally, a set of the minimum path among level curvatures are calculated to obtain the skeleton. The paper shows a set of experiments which simulate the deformations caused by a robot hand in manipulation tasks of flat objects.