Pasar al contenido principal

INSPECCION Y MANIPULACION DE PRODUCTOS ALIMENTICIOS

DPI2010-20286

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2010
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Review. Technologies for robot grippers in pick and place operations for fresh fruits and vegetables

  • Blanes Campos, Carlos|||0000-0003-1977-7429
  • Mellado, Martin|||0000-0002-3429-5316
  • Ortiz Sánchez, María Coral|||0000-0002-2744-6964
  • Valera Fernández, Ángel|||0000-0001-6843-6394
[EN] Robotics has been introduced in industry to replace humans in arduous and repetitive tasks, to reduce labour costs and to ensure consistent quality control of the process. Nowadays robots are cheaper, can work in hostile and dirty environments and they are able to manipulate products at high speed. High speed and reliability and low robot gripper costs are necessary for a profitable pick and place (P&P) process. However, current grippers are not able to handle these products properly because they have uneven shapes, are flexible and irregular, have different textures and are very sensitive to being damaged. This review brings together the requirements and phases used in the process of manipulation, summarises and analyses of the existing, potential and emerging techniques and their possibilities for the manipulation of fresh horticultural products from a detailed study of their characteristics. It considers the difficulties and the lack of engineers to conceive of and implement solutions. Contact grippers with underactuated mechanism and suction cups could be a promising approach for the manipulation of fresh fruit and vegetables. Ongoing study is still necessary on the characteristics and handling requirements of fresh fruit and vegetables in order to design grippers which are suitable for correct manipulation, at high speed, in profitable P&P processes for industrial applications., This work has been partially funded by research project with reference DPI2010-20286 financed by the Spanish Ministerio de Ciencia e Innovacion.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Calibration of a trinocular system formed with wide angle lens cameras

  • Ricolfe Viala, Carlos|||0000-0002-2980-4569
  • Sánchez Salmerón, Antonio José|||0000-0003-1896-5356
  • Valera Fernández, Ángel|||0000-0001-6843-6394
To obtain 3D information of large areas, wide angle lens cameras are used to reduce the number of cameras as much as possible. However, since images are high distorted, errors in point correspondences increase and 3D information could be erroneous. To increase the number of data from images and to improve the 3D information, trinocular sensors are used. In this paper a calibration method for a trinocular sensor formed with wide angle lens cameras is proposed. First pixels locations in the images are corrected using a set of constraints which define the image formation in a trinocular system. When pixels location are corrected, lens distortion and trifocal tensor is computed., This work was partially funded by the Universidad Politecnica de Valencia research funds (PAID 2010-2431 and PAID 10017), Generalitat Valenciana (GV/2011/057) and by Spanish government and the European Community under the project DPI2010-20814-C02-02 (FEDER-CICYT) and DPI2010-20286 (CICYT).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Human robot interaction and tracking using low cost 3D vision systems

  • Martínez Bertí, Enrique
  • Sánchez Salmerón, Antonio José|||0000-0003-1896-5356
  • Benimeli, Francesc|||0000-0001-8565-5548
[EN] This paper describes a platform which allows humans to interact with robotic arms using augmented reality. Low cost kinect cameras (Xbox 360) are used for tracking human skeletons and locations of robot s end effectors. The main goal of this paper is to develop robust trackers on this platform. Concretely, a Kalman filter is used for tracking robotic arms using data received from these sensors. It comes to finding a low cost platform for human-robot interactions., This work was partially funded by the Universitat Politècnica de València research funds (PAID 2010, Project no. 2566) and by Spanish government and the European Community under the project DPI2010- 20814-C02-02 (FEDER-CICYT) and DPI2010-20286 (CICYT).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Camera calibration under optimal conditions

  • Ricolfe Viala, Carlos|||0000-0002-2980-4569
  • Sánchez Salmerón, Antonio José|||0000-0003-1896-5356
Different methods based on photogrammetry or self-calibration exist to calibrate intrinsic and extrinsic camera parameters and also for data pre- and post-processing. From a practical viewpoint, it is quite difficult to decide which calibration method gives accurate results and even whether any data processing is necessary. This paper proposes a set of optimal conditions to resolve the calibration process accurately. The calibration method uses several images of a 2D pattern. Optimal conditions define the number of points and the number of images to resolve the calibration accurately, as well as positions and orientations from where images should be taken., This work was partially funded by the Universidad Politecnica de Valencia research funds (PAID 2010-2431 and PAID 10017), Generalitat Valenciana (GV/2011/057) and by Spanish government and the European Community under the project DPI2010-20814-C02-02 (FEDER-CICYT) and DPI2010-20286 (CICYT).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Handling uncertainty of resource division in multi agent system using game against nature

  • Skrzypczyk, Krzysztof
  • Mellado, Martin|||0000-0002-3429-5316
This paper addresses the problem of resource division for robotic agents in the framework of Multi Agent System. Knowledge of the environment represented in the system is uncertain, incomplete and distributed among the individual agents that have both limited sensing and communication abilities. The pick-up-and-collection problem is considered in order to illustrate the idea presented. In this paper a framework for cooperative task assignment to individual agents is discussed. The process of negotiating access to common resources by intercommunicating agents is modeled and solved as a game against Nature. The working of the proposed system was verified by multiple simulations. Selected, exemplary simulations are presented in the paper to illustrate the approach discussed., This study is partially supported by IMPA (Inspection & Manipulation of Food Products) project (ref. DPI2010-20286), funded by the Spanish Government MICINN and by Programa de Apoyo a la Investigacion y Desarrollo (PAID-02-11) of the Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Using the camera pin-hole model restrictions to calibrate the lens distortion model

  • Ricolfe Viala, Carlos|||0000-0002-2980-4569
  • Sánchez Salmerón, Antonio José|||0000-0003-1896-5356
Camera calibration required the computation of camera pin-hole and lens distortion models. The lens distortion is estimated alone or together with the pin-hole model, by using some existing lens distortion non-metric or self-calibration methods. If both models are computed together, then the models are adjusted to training data, but not to real camera. This is because both pin-hole and lens distortion models are coupled. If they are computed separately, difficulties arise since calibration of lens distortion alone is an unstable process. To improve existing camera calibration methods, this paper proposes a metric calibration method to compute lens distortion separately from the pin-hole model. This method is solved under stable conditions, independently of the computed lens distortion model, since pin-hole and distortion models are computed separately. Images of a planar template are used. First, using distorted control points extracted from images, a set of undistorted points which fits in the pin-hole model are computed. Second, with distorted and undistorted control points, lens distortion is calibrated by using a metric calibration process. © 2011 Elsevier Ltd. All rights reserved., This work was partially funded by the Universidad Politecnica de Valencia research funds (PAID 2010, Project no. 2431) and by Spanish government and the European Community under the project nos. DPI2010-20814-C02-02 (FEDER-CICYT) and DPI2010-20286 (CICYT).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Efficient lens distortion correction for decoupling in calibration of wide angle lens cameras

  • Ricolfe Viala, Carlos|||0000-0002-2980-4569
  • Sánchez Salmerón, Antonio José|||0000-0003-1896-5356
  • Valera Fernández, Ángel|||0000-0001-6843-6394
In photogrammetry applications, camera parameters must be as accurate as possible to avoid deviations in measurements from images. Errors increase if wide angle lens cameras are used. Moreover, the coupling between intrinsic and extrinsic camera parameters and the lens distortion model influences the result of the calibration process notably. This paper proposes a method for calibrating wide angle lens cameras, which takes into account the existing hard coupling. The proposed method obtains stable results, which do not depend on how the image lens distortion is corrected., This work was supported in part by the Universidad Politecnica de Valencia research funds (PAID 2010-2431 and PAID 10017), the Generalitat Valenciana (GV/2011/057) and the Spanish government and the European Community under Project DPI2010-20814-C02-02 (FEDER-CICYT) and Project DPI2010-20286 (CICYT). The associate editor coordinating the review of this paper and approving it for publication was Dr. Subhas C. Mukhopadhyay.