Pasar al contenido principal

NUEVAS TECNICAS ULTRASONICAS PARA ESTIMACION NO-INVASIVA. APLICACIONES INNOVADORAS EN TEJIDOS, VEGETALES, MATERIALES MICRO/NANOESTRUCTURADOS Y ELEMENTOS ESTRATEGICOS.

DPI2011-22438

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2011
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of material structure on air-borne ultrasonic application in drying

  • Ozuna López, César
  • Gomez Alvarez-Arenas, Tomas
  • Riera, Enrique
  • Carcel, J. A.|||0000-0002-3796-6146
  • Garcia-Perez, J.V.|||0000-0002-9993-4246
[EN] This work aims to contribute to the understanding of how the properties of the material being dried affect air-borne ultrasonic application. To this end, the experimental drying kinetics (40 C and 1 m/s) of cassava (Manihot esculenta) and apple (Malus domestica var. Granny Smith) were carried out applying different ultrasonic powers (0, 6, 12, 19, 25 and 31 kW/m3). Furthermore, the power ultrasound-assisted drying kinetics of different fruits and vegetables (potato, eggplant, carrot, orange and lemon peel) already reported in previous studies were also analyzed. The structural, textural and acoustic properties of all these products were assessed, and the drying kinetics modeled by means of the diffusion theory. A significant linear correlation (r > 0.95) was established between the identified effective diffusivity (DW) and the applied ultrasonic power for the different products. The slope of this relationship (SDUP) was used as an index of the effectiveness of the ultrasonic application; thus the higher the SDUP, the more effective the ultrasound application. SDUP was well correlated (rP0.95) with the porosity and hardness. In addition, SDUP was largely affected by the acoustic impedance of the material being dried, showing a similar pattern with the impedance than the transmission coefficient of the acoustic energy on the interface. Thus, soft and open-porous product structures exhibited a better transmission of acoustic energy and were more prone to the mechanical effects of ultrasound. However, materials with a hard and closed-compact structure were less affected by acoustic energy due to the fact that the significant impedance differences between the product and the air cause high energy losses on the interface, The authors acknowledge the financial support of the Spanish Ministerio de Economia y Competitividad (Ref. DPI2012-37466-C03-03, DPI2012-37466-C03-03 and DPI2011-22438) and the assistance with the microstructural analysis provided by Dra. Ana Puig from Departamento de Tecnologia de Alimentos of Universitat Politecnica de Valencia (UPV). The author Cesar Ozuna thanks UPV for an FPI Grant (Ref. 2009-02).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Advances in the Ultrasound Characterization Of Dry-Cured Meat Products

  • Corona Jiménez, Edith
  • Gómez Álvarez-Arenas, Tomas E.
  • Watson, Nicholas
  • Povey, Malcolm J.W.
  • Garcia-Perez, J.V.|||0000-0002-9993-4246
  • Benedito Fort, José Javier|||0000-0003-0163-4593
[EN] In this work, the feasibility of using non-contact ultrasonic techniques (air-coupled and scanning acoustic microscopy, SAM) for characterizing different dry-cured meat products was assessed. Air-coupled ultrasonic measurements were performed on vacuum packaged sliced dry-cured ham, and compared with contact measurements. The average ultrasonic velocity in dry-cured ham was 1846 +/- 49 m/s and 1842 +/- 42 m/s for air-coupled and contact measurements, respectively. The deviation (1% relative error) between both techniques was related to the influence of the heterogeneous structure and composition of dry-cured ham and the transducer focusing. The SAM was used to characterize dry-cured ham and chorizo samples. B-scan images for dry-cured ham and chorizo showed two dominant reflections from the sample, linked to reflections in the lean and fatty tissues. The results indicate that contact ultrasonic measurements could be replaced by the air-coupled technique, reducing the measuring time and the material handling. On the other hand, SAM technique allows the microscopic characterization of dry-cured meat products. (C) 2013 Elsevier Ltd. All rights reserved., The authors acknowledge the financial support from the "Ministerio de Economia y Competitividad" in Spain through the Projects RTA 2010-00029-C04-02 and DPI2011-22438.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Wavelet Cycle Spinning Denoising of NDE Ultrasonic Signals Using a Random Selection of Shifts

  • San Emeterio Prieto, José Luis
  • Rodríguez-Hernández, Miguel A.|||0000-0002-3616-1928
Wavelets are a powerful tool for signal and image denoising. Most of the denoising applications in different fields were based on the thresholding of the discrete wavelet transform (DWT) coefficients. Nevertheless, DWT transform is not a time or shift invariant transform and results depend on the selected shift. Improvements on the denoising performance can be obtained using the stationary wavelet transform (SWT) (also called shift-invariant or undecimated wavelet transform). Denoising using SWT has previously shown a robust and usually better performance than denoising using DWT but with a higher computational cost. In this paper, wavelet shrinkage schemes are applied for reducing noise in synthetic and experimental non-destructive evaluation ultrasonic A-scans, using DWT and a cycle-spinning implementation of SWT. A new denoising procedure, which we call random partial cycle spinning (RPCS), is presented. It is based on a cycle-spinning over a limited number of shifts that are selected in a random way. Wavelet denoising based on DWT, SWT and RPCS have been applied to the same sets of ultrasonic A-scans and their performances in terms of SNR are compared. In all cases three well known threshold selection rules (Universal, Minimax and Sure), with decomposition level dependent selection, have been used. It is shown that the new procedure provides a good robust denoising performance, without the DWT fluctuating performance, and close to SWT but with a much lower computational cost., This work was partially supported by Spanish MCI Project DPI2011-22438
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Noise reduction using wavelet cycle spinning: analysis of useful periodicities in the z-transform domain

  • Rodríguez-Hernández, Miguel A.|||0000-0002-3616-1928
  • San Emeterio, Jose L.
Cycle spinning (CS) and a'trous algorithms are different implementations of the undecimated wavelet transform (UWT). Both algorithms can be used for UWT and even though the resulting wavelet coefficients are different, they keep a correspondence. This paper describes an analysis of the CS algorithm performed in the z-transform domain, showing the similarities and differences with the a'trous implementation. CS generates more wavelet coefficients than a'trous, but the number of significative and different coefficients is the same in both cases because of the occurrence of a periodic repetition in CS coefficients. Mathematical expressions for the relationship between CS and a'trous coefficients and for CS coefficient periodicities are provided in the z-transform domain. In some wavelet denoising applications, periodicities (present in the coefficients of the CS procedure) can also be found in the performance measure of the processed signals. In particular, in ultrasonic CS denoising applications, periodicities have been appreciated in the signal-to-noise ratio (SNR) of the ultrasonic denoised signals. These periodicities can be used to optimize the number of CS coefficients for an efficient implementation. Two examples showing the periodicities in the SNR are included. A selection of several reduced sets of CS wavelet coefficients has been utilized in the examples, and the SNRs resulting after denoising are analyzed., This work was partially supported by Spanish MCI Project DPI2011-22438 and MEC Project TIN2013-47272-C2-1-R. The translation of this paper was funded by the Universitat Politecnica de Valencia, Spain.