Pasar al contenido principal

DISEÑO DE PROTESIS BIOMIMETICAS CON ADAPTACION A LAS PROPIEDADES DEL TEJIDO RECEPTOR. APLICACION EN LA REPARACION DE PROCESOS HERNIARIOS.

DPI2011-27939-C02-02

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2011
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSIDAD DE ALCALA
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Developing a new methodology to characterize in vivo the passive mechanical behavior of abdominal wall on an animal model

  • Simón-Allué, R.
  • Martínez Montiel, J.M.
  • Bellón, J.M.
  • Calvo, B.
The most common surgical repair of abdominal wall hernia goes through implanting a mesh that substitutes the abdominal muscle/fascia while it is healing. To reduce the risk of relapse or possible complications, this mesh needs to mimic the mechanical behavior of the muscle/fascia, which nowadays is not fully determined. The aim of this work is to develop a methodology to characterize in vivo the passive mechanical behavior of the abdominal wall. For that, New Zealand rabbits were subjected to pneumoperitoneum tests, taking the inner pressure from 0 mmHg to 12 mmHg, values similar to those used in human laparoscopies. Animals treated were divided into two groups: healthy and herniated animals with a surgical mesh (polypropylene SurgiproTM Covidien) previously implanted. All experiments were recorded by a stereo rig composed of two synchronized cameras. During the postprocessing of the images, several points over the abdominal surface were tracked and their coordinates extracted for different levels of internal pressure. Starting from that, a three dimensional model of the abdominal wall was reconstructed. Pressure–displacement curves, radii of curvature and strain fields were also analysed. During the experiments, animals tissue mostly deformed during the first levels of pressure, showing the noticeable hyperelastic passive behavior of abdominal muscles. Comparison between healthy and herniated specimen displayed a strong stiffening for herniated animals in the zone where the high density mesh was situated. Cameras were able to discern this change, so this method can be used to measure the possible effect of other meshes.
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Short term behaviour of different polymer structure lightwight meshes used to repair abdominal wall defects

  • Pascual González, María Gemma|||0000-0002-1623-4384
  • Hernández Gascón, Belén
  • Sotomayor Núñez, Sandra
  • Peña Baquedano, Estefanía
  • Calvo Calzada, Begoña
  • Buján Varela, María Julia Araceli|||0000-0003-2419-2476
  • Bellón Caneiro, Juan Manuel|||0000-0002-6071-5011
11 p., Background. While lightweight (LW) polypropylene (PP) meshes are been used for hernia repair, new prosthetic meshes also of low-density and with large pores have recently been introduced composed of other polymer materials. This study compares the behavior in the short-term of two macroporous LW prosthetic materials, PP and non-expanded PTFE. Methods. Partial defects were created in the lateral wall of the abdomen in New Zealand White rabbits and then repaired using a LW PP mesh or a new monofile, LW PTFE mesh. At 14 days postimplant, shrinkage and tissue incorporation, gene and protein expression of neocollagens (qRT-PCR/immunofluorescence), macrophage response (immunohistochemistry) and biomechanical strength were determined. Results. Both meshes induced good host tissue ingrowth, yet the macrophage response was significantly greater for the PTFE implants (p<0.05). Collagen 1/3 mRNA expression was greater for the PP mesh but differences lacked significance. Similar patterns of collagen I and III protein expression were observed in the neoformed tissue infiltrating the two meshes. After 14 days of implant, tensile strengths were also similar, while elastic modulus values were higher for the PTFE mesh (p<0.05). Conclusions. In the short term, host collagen deposition and biomechanical performance seemed unaffected by the polymer structure of the implanted mesh. In contrast, the inflammatory response to mesh implant produced at this early time point was more intense for the PTFE., Ministerio de Ciencia y Tecnología, Instituto de Salud Carlos III
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Short and long-term biomechanical and morphological study of a new suture types in abdominal wall closure

  • Simón Allué, Raquel
  • Pérez López, Paloma
  • Sotomayor Núñez, Sandra
  • Peña Baquedano, Estefanía
  • Pascual González, María Gemma|||0000-0002-1623-4384
  • Bellón Caneiro, Juan Manuel|||0000-0002-6071-5011
  • Calvo Calzada, Begoña
11 p., To perform an abdominal-wall closure, a continuous suture is the preferred method. The suture materials that are most commonly employed in abdominal surgery are polypropylene and polydioxanone. However, in recent times, new products have been marketed, such as non-absorbable polyurethane with elastic properties (Assuplus®, Assut Europe, Italy) and absorbable barbed polydioxanone (Filbloc®, Assut Europe, Italy). The purpose of this study was to compare the ability of those against the standard polypropylene (SurgiproTM, Covidien, USA) and polydioxanone (Assufil®, Assut Europe, Italy) to mimic the biomechanical behavior of the abdominal wall closure. Comparison of the sutures was made first with the materials alone and later in a laparotomy closure of a rabbit abdomen, used as an animal model. The biomechanical analysis consisted of uniaxial tensile tests of threads and sutured samples of the animal abdomen. In the latter case, results were analyzed at short- (21 days) and long- (180 days) term intervals after the surgery. The morphology studies and collagen expression of the samples were also investigated. The results determined that polydioxanone and polypropylene sutures showed a linear elastic behavior, with barbed polydioxanone as the most compliant suture and polyurethane as the stiffest. The sutured samples showed a statistically significant loss of resistance, measured as the load needed to perform a certain stretch, when compared with the corresponding control tissue. Analysis of the stress?stretch curves showed that elastic polyurethane was the only suture able to reproduce the mechanical behavior of healthy tissue in the short term, while the rest of the sutures remained less stiff. This coincides with the expression of type I collagen observed in this group at this point in the study. In the long term, there was no difference among the sutures, and none was able to mimic control behavior., Ministerio de Economía y Competitividad, Instituto de Salud Carlos III
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Long-term behaviour of biological prostheses used as abdominal wall substitutes

  • Pascual González, María Gemma|||0000-0002-1623-4384
  • Sotomayor Núñez, Sandra
  • Pérez López, Paloma
  • Buján Varela, María Julia Araceli|||0000-0003-2419-2476
  • Bellón Caneiro, Juan Manuel|||0000-0002-6071-5011
11 p., Summary. Background. Despite their degradation in the host organism, the benefits of collagen bioprostheses remain unclear. This study addresses the absorption and long-term host tissue incorporation of several collagen biomeshes. Material and methods. Partial ventral hernial defects created in the abdominal wall of rabbits were repaired using the crosslinked meshes Permacol® or CollaMend®, or the non-crosslinked Surgisis®, Tutomesh® or Strattice®. After 90 and 180 days of implant, morphological studies and morpho-metric analysis of the thickness of the meshes were performed. Immunofluorescence confocal microscopy combined with differential interference contrast (DIC) imaging was used to distinguish newly formed collagen from that comprising the mesh. The macrophage response was examined by immunohisto-chemistry. Results. At 90 days, the thinner non-crosslinked biomeshes Tutomesh and Surgisis were more fully degraded with much of their collagen replaced with loose connective tissue. By 180 days, both implants had been practically fully absorbed. In contrast, in Strattice only the outermost third was infiltrated by neoformed tissue. On both surfaces of the crosslinked meshes, a fibrous capsule with host cells lining its perimeter was observed at both time points, though at 180 days these cells had penetrated the mesh interior. At both implant times, Strattice showed the higher expression of collagen type I while collagen III expression was similar for all the meshes. The non-crosslinked materials elicited lower macrophage counts at both time points, significantly so for Strattice. The macrophage response decreased over time for all the meshes but Surgisis. Conclusions. Strattice, the thicker, more compacted non-crosslinked mesh showed the best balance between tissue incorporation and absorption while eliciting a minimal foreign-body reaction in the long-term., Ministerio de Economía y Competitividad