Pasar al contenido principal

MODELADO BIOMECANICO DEL TEJIDO MUSCULO-ESQUELETICO ABDOMINAL

DPI2011-27939-C02-01

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2011
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSIDAD DE ZARAGOZA
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Interaction between diurnal variations of intraocular pressure, pachymetry, and corneal response to an air puff: Preliminary evidence

  • Ariza-Gracia, Miguel Á.
  • Piñero, David P.
  • Rodriguez-Matas, José F.
  • Pérez Cambrodí, Rafael J.
  • Calvo, Begoña
  • Piñero, David P.|||/items/02d2ffcc-a108-4e8d-ad21-df3b3fc92a22
  • Pérez Cambrodí, Rafael J.|||/items/38364cfd-3cc5-456e-a7cf-5f8521b60c56
Diurnal changes in corneal geometry, pachymetry, and intraocular pressure (IOP) in a healthy eye were recorded. The deformation response to an air puff was simulated using 3 levels of corneal stiffness. The response was dependent on IOP and pachymetry and not only on the biomechanical properties of the cornea. Similarly, the maximum variability due to the diurnal changes in pachymetry and IOP in the corneal displacement generated by the air puff was found to reach 5%. Therefore, diurnal changes in IOP and corneal thickness were able to induce some variability in the air puff–based corneal deformation response. This potential variability should be considered when the biomechanical properties of the cornea are analyzed with air-puff devices.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Coupled Biomechanical Response of the Cornea Assessed by Non-Contact Tonometry. A Simulation Study

  • Ariza-Gracia, Miguel Á.
  • Zurita, Jesús F.
  • Piñero, David P.
  • Rodriguez-Matas, José F.
  • Calvo, Begoña
  • Piñero, David P.|||/items/02d2ffcc-a108-4e8d-ad21-df3b3fc92a22
The mechanical response of the cornea subjected to a non-contact air-jet tonometry diagnostic test represents an interplay between its geometry, the corneal material behavior and the loading. The objective is to study this interplay to better understand and interpret the results obtained with a non-contact tonometry test. A patient-specific finite element model of a healthy eye, accounting for the load free configuration, was used. The corneal tissue was modeled as an anisotropic hyperelastic material with two preferential directions. Three different sets of parameters within the human experimental range obtained from inflation tests were considered. The influence of the IOP was studied by considering four pressure levels (10–28 mmHg) whereas the influence of corneal thickness was studied by inducing a uniform variation (300–600 microns). A Computer Fluid Dynamics (CFD) air-jet simulation determined pressure loading exerted on the anterior corneal surface. The maximum apex displacement showed a linear variation with IOP for all materials examined. On the contrary, the maximum apex displacement followed a cubic relation with corneal thickness. In addition, a significant sensitivity of the apical displacement to the corneal stiffness was also obtained. Explanation to this behavior was found in the fact that the cornea experiences bending when subjected to an air-puff loading, causing the anterior surface to work in compression whereas the posterior surface works in tension. Hence, collagen fibers located at the anterior surface do not contribute to load bearing. Non-contact tonometry devices give useful information that could be misleading since the corneal deformation is the result of the interaction between the mechanical properties, IOP, and geometry. Therefore, a non-contact tonometry test is not sufficient to evaluate their individual contribution and a complete in-vivo characterization would require more than one test to independently determine the membrane and bending corneal behavior.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Variations in tendon stiffness due to diets with different glycotoxins affect mechanical properties in the muscle-tendon unit

  • Grasa, J.
  • Calvo, B.
  • Delgado-Andrade, Cristina
  • Navarro, María Pilar
Passive elastic behavior of tendon tissue from rats subjected to different dietary treatments was characterized. For that purpose, twenty-four weanling Wistar rats (41.02 ± 0.16 g) were randomly distributed into four groups. During 88 days each group was fed on different diets: control diet and diets containing advanced glycation end products (AGEs) from glucose–lysine model system, from bread crust and bread dough, respectively. After the trial animals were sacrificed and tendon samples were extracted and tested mechanically to fracture in a uniaxial tensile test machine. A transversely-hyperelastic model was formulated based on stress–strain relationships and its parameters were fit to the experimental data using the Levenberg–Marquardt optimization algorithm. Material parameters were incorporated in a finite element model to study different stress–strain distributions in a muscle-tendon unit. Results show higher strains and stresses in the muscle belly when properties of a stiffer tendon associated with a diet rich in AGEs are included in the model. A real increase in this mechanical response of the tissue could imply possible pain in joint mobility., The authors gratefully acknowledge research support from the Spanish Ministry of Science and Technology through the research project DPI2011-27939-C02-01 as well as the financial support of the Junta de Andalucia., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Coupled Biomechanical Response of the Cornea Assessed by Non-Contact Tonometry. A Simulation Study

  • Ariza-Gracia, Miguel A.
  • Zurita, Jesus F.
  • Piñero, David P.
  • Rodriguez Matas, Jose F.
  • Calvo, Begoña
The mechanical response of the cornea subjected to a non-contact air-jet tonometry diagnostic test represents an interplay between its geometry, the corneal material behavior and the loading. The objective is to study this interplay to better understand and interpret the results obtained with a non-contact tonometry test. A patient-specific finite element model of a healthy eye, accounting for the load free configuration, was used. The corneal tissue was modeled as an anisotropic hyperelastic material with two preferential directions. Three different sets of parameters within the human experimental range obtained from inflation tests were considered. The influence of the IOP was studied by considering four pressure levels (10–28 mmHg) whereas the influence of corneal thickness was studied by inducing a uniform variation (300–600 microns). A Computer Fluid Dynamics (CFD) air-jet simulation de- termined pressure loading exerted on the anterior corneal surface. The maximum apex displacement showed a linear variation with IOP for all materials examined. On the contrary, the maximum apex displacement followed a cubic relation with corneal thickness. In addition, a significant sensitivity of the apical displacement to the corneal stiffness was also obtained. Explanation to this behavior was found in the fact that the cornea experiences bending when subjected to an air-puff loading, causing the anterior surface to work in compression whereas the posterior surface works in tension. Hence, collagen fibers located at the anterior surface do not contribute to load bearing. Non-contact tonometry devices give useful information that could be misleading since the corneal deformation is the result of the interaction between the mechanical properties, IOP, and geometry. Therefore, a non- contact tonometry test is not sufficient to evaluate their individual contribution and a complete in-vivo characterization would require more than one test to independently determine the membrane and bending corneal behavior.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Active behavior of abdominal wall muscles: Experimental results and numerical model formulation

  • Grasa, J.
  • Sierra, M.
  • Lauzeral, N.
  • Muñoz, M.J.
  • Miana-Mena, F.
  • Calvo, B.
In the present study a computational finite element technique is proposed to simulate the mechanical response of muscles in the abdominal wall. This technique considers the active behavior of the tissue taking into account both collagen and muscle fiber directions. In an attempt to obtain the computational response as close as possible to real muscles, the parameters needed to adjust the mathematical formulation were determined from in vitro experimental tests. Experiments were conducted on male New Zealand White rabbits (2047. ±. 34. g) and the active properties of three different muscles: Rectus Abdominis, External Oblique and multi-layered samples formed by three muscles (External Oblique, Internal Oblique, and Transversus Abdominis) were characterized. The parameters obtained for each muscle were incorporated into a finite strain formulation to simulate active behavior of muscles incorporating the anisotropy of the tissue. The results show the potential of the model to predict the anisotropic behavior of the tissue associated to fibers and how this influences on the strain, stress and generated force during an isometric contraction.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Developing a new methodology to characterize in vivo the passive mechanical behavior of abdominal wall on an animal model

  • Simón-Allué, R.
  • Martínez Montiel, J.M.
  • Bellón, J.M.
  • Calvo, B.
The most common surgical repair of abdominal wall hernia goes through implanting a mesh that substitutes the abdominal muscle/fascia while it is healing. To reduce the risk of relapse or possible complications, this mesh needs to mimic the mechanical behavior of the muscle/fascia, which nowadays is not fully determined. The aim of this work is to develop a methodology to characterize in vivo the passive mechanical behavior of the abdominal wall. For that, New Zealand rabbits were subjected to pneumoperitoneum tests, taking the inner pressure from 0 mmHg to 12 mmHg, values similar to those used in human laparoscopies. Animals treated were divided into two groups: healthy and herniated animals with a surgical mesh (polypropylene SurgiproTM Covidien) previously implanted. All experiments were recorded by a stereo rig composed of two synchronized cameras. During the postprocessing of the images, several points over the abdominal surface were tracked and their coordinates extracted for different levels of internal pressure. Starting from that, a three dimensional model of the abdominal wall was reconstructed. Pressure–displacement curves, radii of curvature and strain fields were also analysed. During the experiments, animals tissue mostly deformed during the first levels of pressure, showing the noticeable hyperelastic passive behavior of abdominal muscles. Comparison between healthy and herniated specimen displayed a strong stiffening for herniated animals in the zone where the high density mesh was situated. Cameras were able to discern this change, so this method can be used to measure the possible effect of other meshes.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Automatized patient-specific methodology for numerical determination of biomechanical corneal response

  • Ariza-Gracia, M.Á.
  • Zurita, J.
  • Piñero, D.P.
  • Calvo, B.
  • Rodríguez-Matas, J.F.
This work presents a novel methodology for building a three-dimensional patient-specific eyeball model suitable for performing a fully automatic finite element (FE) analysis of the corneal biomechanics. The reconstruction algorithm fits and smooths the patient’s corneal surfaces obtained in clinic with corneal topographers and creates an FE mesh for the simulation. The patient’s corneal elevation and pachymetry data is kept where available, to account for all corneal geometric features (central corneal thickness–CCT and curvature). Subsequently, an iterative free-stress algorithm including a fiber’s pull-back is applied to incorporate the pre-stress field to the model. A convergence analysis of the mesh and a sensitivity analysis of the parameters involved in the numerical response is also addressed to determine the most influential features of the FE model. As a final step, the methodology is applied on the simulation of a general non-commercial non-contact tonometry diagnostic test over a large set of 130 patients—53 healthy, 63 keratoconic (KTC) and 14 post-LASIK surgery eyes. Results show the influence of the CCT, intraocular pressure (IOP) and fibers (87%) on the numerical corneal displacement (Formula presented.) the good agreement of the (Formula presented.) with clinical results, and the importance of considering the corneal pre-stress in the FE analysis. The potential and flexibility of the methodology can help improve understanding of the eye biomechanics, to help to plan surgeries, or to interpret the results of new diagnosis tools (i.e., non-contact tonometers).
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Short term behaviour of different polymer structure lightwight meshes used to repair abdominal wall defects

  • Pascual González, María Gemma|||0000-0002-1623-4384
  • Hernández Gascón, Belén
  • Sotomayor Núñez, Sandra
  • Peña Baquedano, Estefanía
  • Calvo Calzada, Begoña
  • Buján Varela, María Julia Araceli|||0000-0003-2419-2476
  • Bellón Caneiro, Juan Manuel|||0000-0002-6071-5011
11 p., Background. While lightweight (LW) polypropylene (PP) meshes are been used for hernia repair, new prosthetic meshes also of low-density and with large pores have recently been introduced composed of other polymer materials. This study compares the behavior in the short-term of two macroporous LW prosthetic materials, PP and non-expanded PTFE. Methods. Partial defects were created in the lateral wall of the abdomen in New Zealand White rabbits and then repaired using a LW PP mesh or a new monofile, LW PTFE mesh. At 14 days postimplant, shrinkage and tissue incorporation, gene and protein expression of neocollagens (qRT-PCR/immunofluorescence), macrophage response (immunohistochemistry) and biomechanical strength were determined. Results. Both meshes induced good host tissue ingrowth, yet the macrophage response was significantly greater for the PTFE implants (p<0.05). Collagen 1/3 mRNA expression was greater for the PP mesh but differences lacked significance. Similar patterns of collagen I and III protein expression were observed in the neoformed tissue infiltrating the two meshes. After 14 days of implant, tensile strengths were also similar, while elastic modulus values were higher for the PTFE mesh (p<0.05). Conclusions. In the short term, host collagen deposition and biomechanical performance seemed unaffected by the polymer structure of the implanted mesh. In contrast, the inflammatory response to mesh implant produced at this early time point was more intense for the PTFE., Ministerio de Ciencia y Tecnología, Instituto de Salud Carlos III
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Short and long-term biomechanical and morphological study of a new suture types in abdominal wall closure

  • Simón Allué, Raquel
  • Pérez López, Paloma
  • Sotomayor Núñez, Sandra
  • Peña Baquedano, Estefanía
  • Pascual González, María Gemma|||0000-0002-1623-4384
  • Bellón Caneiro, Juan Manuel|||0000-0002-6071-5011
  • Calvo Calzada, Begoña
11 p., To perform an abdominal-wall closure, a continuous suture is the preferred method. The suture materials that are most commonly employed in abdominal surgery are polypropylene and polydioxanone. However, in recent times, new products have been marketed, such as non-absorbable polyurethane with elastic properties (Assuplus®, Assut Europe, Italy) and absorbable barbed polydioxanone (Filbloc®, Assut Europe, Italy). The purpose of this study was to compare the ability of those against the standard polypropylene (SurgiproTM, Covidien, USA) and polydioxanone (Assufil®, Assut Europe, Italy) to mimic the biomechanical behavior of the abdominal wall closure. Comparison of the sutures was made first with the materials alone and later in a laparotomy closure of a rabbit abdomen, used as an animal model. The biomechanical analysis consisted of uniaxial tensile tests of threads and sutured samples of the animal abdomen. In the latter case, results were analyzed at short- (21 days) and long- (180 days) term intervals after the surgery. The morphology studies and collagen expression of the samples were also investigated. The results determined that polydioxanone and polypropylene sutures showed a linear elastic behavior, with barbed polydioxanone as the most compliant suture and polyurethane as the stiffest. The sutured samples showed a statistically significant loss of resistance, measured as the load needed to perform a certain stretch, when compared with the corresponding control tissue. Analysis of the stress?stretch curves showed that elastic polyurethane was the only suture able to reproduce the mechanical behavior of healthy tissue in the short term, while the rest of the sutures remained less stiff. This coincides with the expression of type I collagen observed in this group at this point in the study. In the long term, there was no difference among the sutures, and none was able to mimic control behavior., Ministerio de Economía y Competitividad, Instituto de Salud Carlos III
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Long-term behaviour of biological prostheses used as abdominal wall substitutes

  • Pascual González, María Gemma|||0000-0002-1623-4384
  • Sotomayor Núñez, Sandra
  • Pérez López, Paloma
  • Buján Varela, María Julia Araceli|||0000-0003-2419-2476
  • Bellón Caneiro, Juan Manuel|||0000-0002-6071-5011
11 p., Summary. Background. Despite their degradation in the host organism, the benefits of collagen bioprostheses remain unclear. This study addresses the absorption and long-term host tissue incorporation of several collagen biomeshes. Material and methods. Partial ventral hernial defects created in the abdominal wall of rabbits were repaired using the crosslinked meshes Permacol® or CollaMend®, or the non-crosslinked Surgisis®, Tutomesh® or Strattice®. After 90 and 180 days of implant, morphological studies and morpho-metric analysis of the thickness of the meshes were performed. Immunofluorescence confocal microscopy combined with differential interference contrast (DIC) imaging was used to distinguish newly formed collagen from that comprising the mesh. The macrophage response was examined by immunohisto-chemistry. Results. At 90 days, the thinner non-crosslinked biomeshes Tutomesh and Surgisis were more fully degraded with much of their collagen replaced with loose connective tissue. By 180 days, both implants had been practically fully absorbed. In contrast, in Strattice only the outermost third was infiltrated by neoformed tissue. On both surfaces of the crosslinked meshes, a fibrous capsule with host cells lining its perimeter was observed at both time points, though at 180 days these cells had penetrated the mesh interior. At both implant times, Strattice showed the higher expression of collagen type I while collagen III expression was similar for all the meshes. The non-crosslinked materials elicited lower macrophage counts at both time points, significantly so for Strattice. The macrophage response decreased over time for all the meshes but Surgisis. Conclusions. Strattice, the thicker, more compacted non-crosslinked mesh showed the best balance between tissue incorporation and absorption while eliciting a minimal foreign-body reaction in the long-term., Ministerio de Economía y Competitividad
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Coupled biomechanical response of the cornea assessed by non-contact tonometry. A simulation study

  • Ariza Gracia, Miguel A.
  • Zurita Gabasa, Jesús
  • Piñero, David P.
  • Rodríguez Matas, José F.
  • Calvo, Begoña
The mechanical response of the cornea subjected to a non-contact air-jet tonometry diagnostic test represents an interplay between its geometry, the corneal material behavior and the loading. The objective is to study this interplay to better understand and interpret the results obtained with a non-contact tonometry test. A patient-specific finite element model of a healthy eye, accounting for the load free configuration, was used. The corneal tissue was modeled as an anisotropic hyperelastic material with two preferential directions. Three different sets of parameters within the human experimental range obtained from inflation tests were considered. The influence of the IOP was studied by considering four pressure levels (10–28 mmHg) whereas the influence of corneal thickness was studied by inducing a uniform variation (300–600 microns). A Computer Fluid Dynamics (CFD) air-jet simulation determined pressure loading exerted on the anterior corneal surface. The maximum apex displacement showed a linear variation with IOP for all materials examined. On the contrary, the maximum apex displacement followed a cubic relation with corneal thickness. In addition, a significant sensitivity of the apical displacement to the corneal stiffness was also obtained. Explanation to this behavior was found in the fact that the cornea experiences bending when subjected to an air-puff loading, causing the anterior surface to work in compression whereas the posterior surface works in tension. Hence, collagen fibers located at the anterior surface do not contribute to load bearing. Non-contact tonometry devices give useful information that could be misleading since the corneal deformation is the result of the interaction between the mechanical properties, IOP, and geometry. Therefore, a noncontact tonometry test is not sufficient to evaluate their individual contribution and a complete in-vivo characterization would require more than one test to independently determine the membrane and bending corneal behavior., The research leading these results has received funding from the European Union’s Seven Framework Program managed by REA Research Executive agency under Grant Agreement n° FP7-SME-2013 606634 and the Spanish Ministry of Economy and Competitiveness (DPI2011-27939-C02-01).