Pasar al contenido principal

MONITORIZACION, INFERENCIA, OPTIMIZACION Y CONTROL MULTI-ESCALA: DE CELULAS A BIORREACTORES.

DPI2011-28112-C04-01

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2011
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 16
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Estimation of recombinant protein production in Pichia pastoris base don a constraint-based model

  • Tortajada Serra, Marta
  • Llaneras Estrada, Francisco
  • Ramón, D.
  • Picó, Jesús|||0000-0003-4144-3521
[EN] A previously validated constraint based model and possibilistic MFA have been used to design a simple estimator of protein production rate in Pichia pastoris cultures. A structured model of the yeast P. pastoris metabolism is used to predict the balance of key energetic equivalents such as ATP from available measurements, mainly substrate consumption, gases exchange rates and biomass specific growth. It has been shown that ATP flux can be related to biomass growth and protein productivity specific rates by linear regression. Cross-validation has been applied for robust parameter fitting on the basis of chemostat, steady-state experimental conditions. In this way, protein estimation can be integrated in the constraint-based model, and possibilistic protein productivity prediction can be given even if only a few extracellular rates are known. Complimentary estimation of biomass growth and intracellular rates are also shown in different lacking-data conditions, frequent in industrial environment. © 2012 Elsevier Ltd., This research has been partially supported by the Spanish Government (2nd and 4th authors are grateful to grants DPI2008-06880-C03-01 and Feder-Cicyt DPI2011-28112-C04-01). The authors are also grateful to the Company Biopolis for his support to this research.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Otros (Other)

Modelado de sistemas bioquímicos: De la Ley de Acción de Masas a la Aproximación Lineal del Ruido, Modelling biochemical systems: from Mass Action Kinetics to Linear Noise Approximation

  • Picó, Jesús|||0000-0003-4144-3521
  • Vignoni, Alejandro|||0000-0001-9977-7132
  • Boada-Acosta, Yadira Fernanda|||0000-0001-5677-2702
  • Picó i Marco, Enric
[EN] In the last decade we have witnessed a growing application of engineering techniques to biology. Areas such as Systems Biology or, more recently, Synthetic Biology, get more and more attention from the engineers. Specifically, modeling in these fields makes possible the generation of new experimentally verifiable hypothesis, and new ways of biological intervention, as well as more or less mechanistic explanations of experimental results. A model-based approximation requires the consideration of the biochemical reactions dynamics and their regulation. The first part of this tutorial describes the deterministic modeling and model reduction techniques, as applied to the class of biochemical reactions specific to molecular cell biology.Noise plays a crucial role in the biological circuitry dynamics. In the field of automatic control there is a long tradition of modeling using linear stochastic differential equations, under the simplifying assumption that noise has a magnitude independent of the state. This assumption is not valid in biological circuits. The second part of the tutorial describes the most widely used methods for stochastic modeling in molecular cell biology, paying special attention to the so-called linear noise approximation. , [ES] Durante la ultima década hemos vivido una creciente aplicación de técnicas propias de las ingenierías a la biología. Áreas como la Biología de Sistemas o, más recientemente, la Biología Sintética, reciben una atención cada vez mayor por parte de los ingenieros. En particular, el modelado en estos ámbitos permite la generación de nuevas hipótesis contrastables experimentalmente, y de nuevas formas de intervención biológica, así como explicaciones más o menos mecanicistas de los resultados experimentales. Una aproximación basada en modelo requiere considerar la dinámica de las reacciones bioquímicas y su regulación. En la primera parte de este tutorial se introducen el modelado determinista y reducción de modelos de la clase de reacciones bioquímicas propias de la biología molecular celular.El ruido juega un papel crucial en la dinámica de los circuitos biológicos. En el área de control automático hay una larga tradición de modelado mediante ecuaciones diferenciales estocásticas lineales, bajo la hipótesis simplificadora de asumir que el ruido tiene una magnitud independiente de la del estado. Esta hipótesis no es válida en los circuitos biológicos. En la segunda parte del tutorial se describen los métodos de modelado estocástico más usados en biología molecular, con especial atención a denominada aproximación lineal del ruido., Este trabajo ha sido realizado parcialmente gracias al apoyo de los proyectos FEDER-CICYT DPI2011-28112-C04-01, y DPI2014-55276-C5-1. Yadira Boada agradece la beca FPI/2013- 3242 de la Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Stability preserving maps for finite-time convergence: super-twisting sliding-mode algorithm

  • Picó, Jesús|||0000-0003-4144-3521
  • Vignoni, Alejandro|||0000-0001-9977-7132
  • Picó Marco, Enrique
  • De Battista, Hernán
The super-twisting algorithm (STA) has become the prototype of second-order sliding mode algorithm. It achieves finite time convergence by means of a continuous action, without using information about derivatives of the sliding constraint. Thus, chattering associated to traditional sliding-mode observers and controllers is reduced. The stability and finite-time convergence analysis have been jointly addressed from different points of view, most of them based on the use of scaling symmetries (homogeneity), or non-smooth Lyapunov functions. Departing from these approaches, in this contribution we decouple the stability analysis problem from that of finite-time convergence. A nonlinear change of coordinates and a time-scaling are used. In the new coordinates and time¿space, the transformed system is stabilized using any appropriate standard design method. Conditions under which the combination of the nonlinear coordinates transformation and the time-scaling is a stability preserving map are given. Provided convergence in the transformed space is faster thanO(1/¿ )¿where ¿ is the transformed time¿ convergence of the original system takes place in finite-time. The method is illustrated by designing a generalized super-twisting observer able to cope with a broad class of perturbations., This work was supported by the National University of La Plata (Project 11-1127), ANPCyT (PICT2007-005359), and CONICET (PIP112-200801-01052) of Argentina; and grants FPI-UPV/2009-21, and Cicyt-FEDER DPI2011-28112-004-01 from Spain. The material in this paper was not presented at any conference. This paper was recommended for publication in revised form by Associate Editor Zhihua Qu under the direction of Editor Andrew R. Teel.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Metabolic flux understanding of Pichia pastoris grown on heterogenous culture media

  • González Martínez, José María
  • Folch-Fortuny, Abel
  • Llaneras Estrada, Francisco
  • Tortajada Serra, Marta
  • Picó, Jesús|||0000-0003-4144-3521
  • Ferrer, Alberto|||0000-0001-7244-5947
[EN] Within the emergent field of Systems Biology, mathematical models obtained from physical chemical laws (the so-called first principles-based models) of microbial systems are employed to discern the principles that govern cellular behaviour and achieve a predictive understanding of cellular functions. The reliance on this biochemical knowledge has the drawback that some of the assumptions (specific kinetics of the reaction system, unknown dynamics and values of the model parameters) may not be valid for all the metabolic possible states of the network. In this uncertainty context, the combined use of fundamental knowledge and data measured in the fermentation that describe the behaviour of the microorganism in the manufacturing process is paramount to overcome this problem. In this paper, a grey modelling approach is presented combining data-driven and first principles information at different scales, developed for Pichia pastoris cultures grown on different carbon sources. This approach will allow us to relate patterns of recombinant protein production to intracellular metabolic states and correlate intra and extracellular reactions in order to understand how the internal state of the cells determines the observed behaviour in P. pastoris cultivations., Research in this study was partially supported by the Spanish Ministry of Science and Innovation and FEDER funds from the European Union through grants DPI2011-28112-C04-01 and DPI2011-28112-C04-02. The authors are also grateful to Biopolis SL for supporting this research. We also gratefully acknowledge Associate Professor Jose Camacho for providing the Exploratory Data Analysis Toolbox.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Safety Auxiliary Feedback Element for the Artificial Pancreas in Type 1 Diabetes

  • Revert Tomás, Ana
  • Garelli, Fabricio
  • De Battista, Hernan
  • Rossetti, Paolo
  • Picó, Jesús|||0000-0003-4144-3521
  • Bondía Company, Jorge|||0000-0001-7286-3719
[EN] The artificial pancreas aims at the automatic deliv-ery of insulin for glycemic control in patients with type 1 diabetes, i.e., closed-loop glucose control. One of the challenges of the arti-ficial pancreas is to avoid controller overreaction leading to hypo-glycemia, especially in the late postprandial period. In this study, an original proposal based on sliding mode reference conditioning ideas is presented as a way to reduce hypoglycemia events induced by a closed-loop glucose controller. The method is inspired in the intuitive advantages of two-step constrained control algorithms. It acts on the glucose reference sent to the main controller shaping it so as to avoid violating given constraints on the insulin-on-board. Some distinctive features of the proposed strategy are that 1) it provides a safety layer which can be adjusted according to medical criteria; 2) it can be added to closed-loop controllers of any nature; 3) it is robust against sensor failures and overestimated prandial insulin doses; and 4) it can handle nonlinear models. The method is evaluated in silico with the ten adult patients available in the FDA-accepted UVA simulator., This work was supported in part by the FEDER-CICYT under Grant DPI2008-06880-C03-01, Grant DPI2011-28112-C04-01, and Grant DPI2010-20764-C02, in part by the European Union Seventh Framework Programme (FP7/2007-2013) under Grant FP7-PEOPLE-2009-IEF Ref 252085, and in part by the Argentinian Government under Grant ANPCyT PICT-2011-0888, Grant CONICET PIP112-2011-00361, and Grant UNLP I164. The work of A. Revert was supported by the Spanish Ministry of Science and Innovation fellowship under Grant FPI BES-2009-020327.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Parameter Identification in Synthetic Biological Circuits Using Multi-Objective Optimization

  • Boada-Acosta, Yadira Fernanda|||0000-0001-5677-2702
  • Vignoni, Alejandro|||0000-0001-9977-7132
  • Picó, Jesús|||0000-0003-4144-3521
  • Reynoso Meza, Gilberto
[EN] Synthetic biology exploits the of mathematical modeling of synthetic circuits both to predict the behavior of the designed synthetic devices, and to help on the selection of their biological coin portents. The increasing complexity of the circuits being designed requires performing approximations and model reductions to get handy models. Parameter estimation in these models remains a challenging problem that has usually been addressed by optimizing the weighted combination of different prediction errors to obtain a single solution. The single-objective approach is inadequate to incorporate different kinds of experiments, and to identify parameters for an ensemble of biological circuit models. We present a methodology based on multi-objective optimization to perform parameter estimation that can fully harness to ensembles of local models for biological circuits. The methodology uses a global multi-objective evolutionary algorithm and a multi-criteria decision making strategy to select the most suitable solutions. Our approach finds an approximation to the Pareto optimal set of model parameters that correspond to each experimental scenario. Then, the Pareto set was clustered according to the experimental scenarios. This, in turn, allows to analyze the sensitivity of model parameters for different scenarios. Finally, we show the methodology applicability through the case study of a genetic incoherent feed-forward circuit, under different concentrations of the inducer input signal. (C) 2016 IFAC (International Federation Of Automatic Control) Hosting by Elsevier Ltd. All rights reserved., This work is partially supported by Spanish government and European Union (FEDER-CICYT DPI2011-28112-C04-01, and DPI2014-55276-C5-1). Y.B. thanks grant FP/2013-3242 of Universitat Politecnica de Valencia and Becas Iberoamerica of Santander Group, Spain 2015. G.R.M. thanks the partial support provided by the postdoctoral fellowship BJT-304804/2014-2 from the National Council of Scientific and Technologic Development of Brazil. A.V. thanks the Max Planck Society, the CSBD and the MPI-CBG. We are grateful to Dr. C,Bauerl and Dr, D. Provencio at the SB2CLab for their help in plasmid construction and getting experimental data. Also to Dr. V. Monedero at IATACSIC for allowing us to use the POLARstar plate reader at his lab,
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Validation of a FBA model for Pichia pastoris in chemostat cultures

  • Morales, Yeimy
  • Tortajada, Marta
  • Vehi, Josep
  • Picó, Jesús|||0000-0003-4144-3521
  • Llaneras, Francisco
Background: Constraint-based metabolic models and flux balance analysis (FBA) have been extensively used in the last years to investigate the behavior of cells and also as basis for different industrial applications. In this context, this work provides a validation of a small-sized FBA model of the yeast Pichia pastoris. Our main objective is testing how accurate is the hypothesis of maximum growth to predict the behavior of P. pastoris in a range of experimental environments. Results: A constraint-based model of P. pastoris was previously validated using metabolic flux analysis (MFA). In this paper we have verified the model ability to predict the cells behavior in different conditions without introducing measurements, experimental parameters, or any additional constraint, just by assuming that cells will make the best use of the available resources to maximize its growth. In particular, we have tested FBA model ability to: (a) predict growth yields over single substrates (glucose, glycerol, and methanol); (b) predict growth rate, substrate uptakes, respiration rates, and by-product formation in scenarios where different substrates are available (glucose, glycerol, methanol, or mixes of methanol and glycerol); (c) predict the different behaviors of P. pastoris cultures in aerobic and hypoxic conditions for each single substrate. In every case, experimental data from literature are used as validation. Conclusions: We conclude that our predictions based on growth maximisation are reasonably accurate, but still far from perfect. The deviations are significant in scenarios where P. pastoris grows on methanol, suggesting that the hypothesis of maximum growth could be not dominating in these situations. However, predictions are much better when glycerol or glucose are used as substrates. In these scenarios, even if our FBA model is small and imposes a strong assumption regarding how cells will regulate their metabolic fluxes, it provides reasonably good predictions in terms of growth, substrate preference, product formation, and respiration rates, This research has been partially supported by the Spanish Government (cicyt: DPI 2011-28112-C04-01, DPI 2013-46982-C2-2-R) and Biopolis S.L. (R.C.055/12). Yeimy Morales is grateful for the BR Grant of the University of Girona (BR2012/26). The authors are grateful to the company Biopolis S.L. for his support to this research.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multi-objective optimization framework to obtain model-based guidelines for tuning biological synthetic devices: an adaptive network case

  • Boada-Acosta, Yadira Fernanda|||0000-0001-5677-2702
  • Picó, Jesús|||0000-0003-4144-3521
  • Vignoni, Alejandro|||0000-0001-9977-7132
  • Reynoso Meza, Gilberto
Background: Model based design plays a fundamental role in synthetic biology. Exploiting modularity, i.e. using biological parts and interconnecting them to build new and more complex biological circuits is one of the key issues. In this context, mathematical models have been used to generate predictions of the behavior of the designed device. Designers not only want the ability to predict the circuit behavior once all its components have been determined, but also to help on the design and selection of its biological parts, i.e. to provide guidelines for the experimental implementation. This is tantamount to obtaining proper values of the model parameters, for the circuit behavior results from the interplay between model structure and parameters tuning. However, determining crisp values for parameters of the involved parts is not a realistic approach. Uncertainty is ubiquitous to biology, and the characterization of biological parts is not exempt from it. Moreover, the desired dynamical behavior for the designed circuit usually results from a trade-off among several goals to be optimized. Results: We propose the use of a multi-objective optimization tuning framework to get a model-based set of guidelines for the selection of the kinetic parameters required to build a biological device with desired behavior. The design criteria are encoded in the formulation of the objectives and optimization problem itself. As a result, on the one hand the designer obtains qualitative regions/intervals of values of the circuit parameters giving rise to the predefined circuit behavior; on the other hand, he obtains useful information for its guidance in the implementation process. These parameters are chosen so that they can effectively be tuned at the wet-lab, i.e. they are effective biological tuning knobs. To show the proposed approach, the methodology is applied to the design of a well known biological circuit: a genetic incoherent feed-forward circuit showing adaptive behavior. Conclusion: The proposed multi-objective optimization design framework is able to provide effective guidelines to tune biological parameters so as to achieve a desired circuit behavior. Moreover, it is easy to analyze the impact of the context on the synthetic device to be designed. That is, one can analyze how the presence of a downstream load influences the performance of the designed circuit, and take it into account., Research in this area is partially supported by Spanish government and European Union (FEDER-CICYT DPI2011-28112-C04-01, and DPI2014-55276-C5-1-R). Yadira Boada thanks grant FPI/2013-3242 of Universitat Politecnica de Valencia; Gilberto Reynoso-Meza gratefully acknowledges the partial support provided by the postdoctoral fellowship BJT-304804/2014-2 from the National Council of Scientific and Technologic Development of Brazil (CNPq) for the development of this work. We are grateful to Alejandra Gonzalez-Bosca for her collaboration on this topic while doing her Bachelor thesis, and to Dr. Jose Luis Pitarch from Universidad de Valladolid for his advise in algorithmic implementations and for proof reading the manuscript.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

MCR-ALS on metabolic networks: Obtaining more meaningful pathways

  • Folch-Fortuny, Abel
  • Tortajada Serra, Marta
  • Llaneras Estrada, Francisco
  • Prats-Montalbán, José Manuel|||0000-0001-6294-4486
  • Picó, Jesús|||0000-0003-4144-3521
  • Ferrer, Alberto|||0000-0001-7244-5947
[EN] With the aim of understanding the flux distributions across a metabolic network, i.e. within living cells, Principal Component Analysis (PCA) has been proposed to obtain a set of orthogonal components (pathways) capturing most of the variance in the flux data. The problems with this method are (i) that no additional information can be included in the model, and (ii) that orthogonality imposes a hard constraint, not always reasonably. To overcome these drawbacks, here we propose to use a more flexible approach such as Multivariate Curve Resolution-Alternating Least Squares (MCR-ALS) to obtain this set of biological pathways through the network. By using this method, different constraints can be included in the model, and the same source of variability can be present in different pathways, which is reasonable from a biological standpoint. This work follows a methodology developed for Pichia pastoris cultures grown on different carbon sources, lately presented in González-Martínez et al. (2014). In this paper a different grey modelling approach, which aims to incorporate a priori knowledge through constraints on the modelling algorithms, is applied to the same case of study. The results of both models are compared to show their strengths and weaknesses., Research in this study was partially supported by the Spanish Ministry of Science and Innovation and FEDER funds from the European Union through grants DPI2011-28112-C04-01 and DPI2011-28112-C04-02. The authors are also grateful to Biopolis SL for supporting this research.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Differential algebra for control systems design. Constructive computation of canonical forms

  • Picó-Marco, Enric
El artículo describe una nueva manera de calcular automáticamente determinadas formas canónicas de uso en control de sistemas usando álgebra diferencial., The author acknowledges the support of the Transnational Access Programme at the Research Institute for Symbolic Computation in Linz, Austria, funded by European Commission Framework 6 Programme for Integrated Infrastructures Initiatives under the project SCIEnce, Contract 026133. This work has been partially funded by the Spanish government, CICYT DPI2011-28112-C04-01, and the university UPV-PAID-05-2010-"Nuevas lineas de investigacion multidisciplinares" 20101210.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Second-order sliding mode observer for multiple kinetic rates estimation in bioprocesses

  • Nuñez, Sebastián
  • Battista, Hernán de
  • Garelli, Fabricio
  • Vignoni, Alejandro|||0000-0001-9977-7132
  • Picó, Jesús|||0000-0003-4144-3521
[EN] Specific kinetic rates are key variables regarding metabolic activity in bioprocesses. They are non-linear functions of concentrations and operating conditions and therefore of difficult access for process control. In this paper, a multiple kinetic rates observer based on second-order sliding mode ideas is proposed. The main difference with other proposals is that smooth estimates are achieved in finite-time without adding additional dynamics. The resulting estimator is robust against uncertainty in the model of the estimated variables. Experimental results from continuous fermentation of S. cerevisiae are presented, where microbial specific growth rate and net ethanol production rate are estimated., This work was supported by ANPCyT (PICT-2011-0888), National University of La Plata (Project 1164) and CONICET (PIP 112-2011-00361) of Argentina; and Universitat Politecnica de Valencia (Grant FPI/2009-21) and FEDER-CICYT (DPI2011-28112-C04-01) of Spain and European Union.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Evaluation of a novel continuous glucose monitoring-based method for mealtime insulin dosing - the iBolus - in subjects with type 1 diabetes using continuous subcutaneous insulin infusion therapy: a randomized controlled trial

  • Rossetti, Paolo
  • Ampudia Blasco, F. Javier
  • Laguna Sanz, Alejandro José
  • Revert Tomás, Ana
  • Vehí Casellas, Josep
  • Ascaso, Juan F.
  • Bondía Company, Jorge|||0000-0001-7286-3719
[EN] Objective: Prandial insulin dosing is an empirical practice associated frequently with poor reproducibility in postprandial glucose response. Based on continuous glucose monitoring (CGM), a method for prandial insulin administration (iBolus) is presented and evaluated for people with type 1 diabetes using CSII therapy. Subjects and Methods: An individual patient¿s model for a 5-h postprandial period was obtained from 6-day ambulatory CGM and used for iBolus calculation in 12 patients with type 1 diabetes. In a double-blind, crossover study each patient underwent four meal tests with 40 g or 100 g of carbohydrates (CHOs), both on two occasions. For each meal, the iBolus or the traditional bolus (tBolus) was given before mealtime (t 0) in a randomized order. We measured the postprandial glycemic response as the area under the curve of plasma glucose (AUC-PG0¿5h) and variability as the individual coef¿cient of variation (CV) of AUC-PG0¿5h. The contribution of the insulin-to-CHO ratio, CHO, plasma glucose at t 0 (PGt0), and insulin dose to AUC-PG0¿5h and its CV was also investigated. Results: AUC-PG0¿5h was similar with either bolus for 40-g (iBolus vs. tBolus, 585.5¿127.5 vs. 689.2¿180.7 mg/dL$h) or 100-g (752.1¿237.7 vs. 760.0¿263.2 mg/dL$h) CHO meals. A multiple regression analysis revealed a signi¿cant model only for the tBolus, with PGt0 being the best predictor of AUC-PG0¿5h explaining approximately 50% of the glycemic response. Observed variability was greater with the iBolus (CV, 16.7¿15.3% vs. 10.1¿12.5%) but independent of the factors studied. Conclusions: A CGM-based algorithm for calculation of prandial insulin is feasible, although it does not reduce unpredictability of individual glycemic responses. Causes of variability need to be identi¿ed and analyzed for further optimization of postprandial glycemic control., We are grateful to Mrs. Sara Correa, Fundacion INCLIVA-Hospital Clinico Universitario de Valencia, and Mrs. Geles Viguer, Hospital Clinico Universitario de Valencia, for their invaluable help in conducting the study. We also thanks Dr. Carmine Fanelli, University of Perugia, Dr. Howard Zisser, Sansum Diabetes Research Institute, and Prof. Alberto Ferrer, Universitat Politecnica de Valencia, for their suggestions on study design and data analysis. The research leading to these results has received funding from the European Union Seventh Framework Programme (FP7/2007/2013) under grant agreement 252085 and from the Spanish Ministry of Science under grants DPI2010-20764-C02-01 and DPI2011-28112-C04-01.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Sliding Mode Reference Coordination of Constrained Feedback Systems

  • Vignoni, Alejandro|||0000-0001-9977-7132
  • Picó, Jesús|||0000-0003-4144-3521
  • Garelli, Fabricio
[EN] This paper addresses the problem of coordinating dynamical systems with possibly different dynamics (e.g., linear and nonlinear, different orders, constraints, etc.) to achieve some desired collective behavior under the constraints and capabilities of each system. To this end, we develop a new methodology based on reference conditioning techniques using geometric set invariance and sliding mode control: the sliding mode reference coordination (SMRCoord). The main idea is to coordinate the systems references. Starting from a general framework, we propose two approaches: a local one through direct interactions between the different systems by sharing and conditioning their own references and a global centralized one, where a central node makes decisions using information coming from the systems references. In particular, in this work we focus in implementation on multivariable systems like unmanned aerial vehicles (UAVs) and robustness to external perturbations. To show the applicability of the approach, the problem of coordinating UAVs with input constraints is addressed as a particular case of multivariable reference coordination with both global and local configuration., Research in this area is partially supported by Argentine government (ANPCyT PICT 2011-0888 and CONICET PIP 112-2011-00361), Spanish government (FEDER-CICYT DPI2011-28112-C04-01), and Universitat Politecnica de Valencia (Grant FPI/2009-21)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Coordinación de sistemas con diferentes dinámicas utilizando conceptos de invarianza geométrica y modos deslizantes, Systems coordination: using geometric set invariance and sliding modes ideas

  • Vignoni, Alejandro|||0000-0001-9977-7132
  • Picó, Jesús|||0000-0003-4144-3521
  • Garelli, Fabricio
[ES] Dentro de las posibles acepciones de la palabra, en este trabajo hablaremos de coordinación para referirnos a la acción de actuar sobre las referencias de los sistemas para lograr algún comportamiento colectivo deseado pero considerando las restricciones y capacidades de cada sistema. Con este objetivo, se desarrolla una novedosa metodología basada en técnicas de acondicionamiento de referencia utilizando invarianza geométrica de conjuntos y control por modos deslizantes. A partir de un marco general, se proponen dos enfoques: uno global del tipo sistema supervisor, y otro local a través de interacciones entre los distintos sistemas, generando una red de interacciones. La metodologéa desarrollada permite abordar el el problema de coordinación de sistemas cuya dinámica no necesariamente es igual para todos los sistemas, pudiendo ser lineal, no lineal, de diferente orden, con restricciones, etc. Para ello, la dinámica propia de cada sub-sistema se mantiene oculta al sistema de coordinación. Por otro lado, el sistema de coordinación dispone sólo de la información necesaria sobre las limitaciones y restricciones de cada sistema. La idea principal de enfoque de este trabajo es que para coordinar varios sistemas es necesario modular las referencias locales de cada uno, teniendo en cuenta los objetivos globales, las interacciones locales y las capacidades de cada uno de los sistemas., [EN] Among the possible meanings of the word, this paper will discuss coordinated action to refer to the act on references of systems to achieve some collective behavior desired but considering the constraints and capabilities of each system. To this end, we develop a new methodology based on conditioning techniques reference using geometric invariance sets and sliding mode control. From a general framework, we propose two approaches: a global centralized one and a local through interactions between different systems. The approach addresses the problem of coordinating dynamical systems with possibly different dynamics (e.g. linear and nonlinear, different orders, constraints, etc.).The main idea is to shape the systems local feasible references in order to keep them coordinated.To show the applicability of the approach, the problem of coordinating different dynamical systems with control saturations is addressed as a particular case with both global and local configuration., Este trabajo ha sido realizado parcialmente gracias al apoyo del proyecto MultiScaleS (CICYT DPI2011-28112-C04-01) del Ministerio de Ciencia e Innovacion, Gobierno ´ de Espana y a ˜ los proyectos ANPCyT PICT-2011-0888, CONICET PIP 112-2011-00361 y UNLP I164 de Argentina. AV agradece el apoyo de la Universitat Politecnica ` de Valencia para ` el desarrollo de este trabajo mediante la becas FPI/2009-21 y PAID-00-11/2714.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optimization Alternatives for Robust Model-based Design of Synthetic Biological Circuits

  • Boada-Acosta, Yadira Fernanda|||0000-0001-5677-2702
  • Pitarch, José Luis|||0000-0001-5356-6321
  • Vignoni, Alejandro|||0000-0001-9977-7132
  • Picó, Jesús|||0000-0003-4144-3521
  • Reynoso Meza, Gilberto
[EN] Synthetic biology is reaching the situation where tuning devices by hand is no longer possible due to the complexity of the biological circuits being designed. Thus, mathematical models need to be used in order, not only to predict the behavior of the designed synthetic devices; but to help on the selection of the biological parts, i.e., guidelines for the experimental implementation. However, since uncertainties are inherent to biology, the desired dynamics for the circuit usually requires a trade-off among several goals. Hence, a multi-objective optimization design (MOOD) naturally arises to get a suitable parametrization (or range) of the required kinetic parameters to build a biological device with some desired properties. Biologists have classically addressed this problem by evaluating a set of random Monte Carlo simulations with parameters between an operation range. In this paper, We propose solving the MOOD by means of dynamic programming using both a global multi-objective evolutionary algorithm (MOLA) and a local gradient-based nonlinear programming (NLP) solver. The performance of both alternatives is then checked in the design of a well-known biological circuit: a genetic incoherent feed-forward loop showing adaptive behavior. (C) 2016, IFAC (International Federation of Antomatic Control) Hosting by Elsevier Ltd. All rights reserved., The research leading to these results has received funding from the European Union (FP7/2007-2013 under grant agreement no604068), the Spanish Government (FEDER-CICYT DPI2011-524 28112-C04-01, DPI2014-55276-C5-1-R, DPI2015-70975-P) and the National Council of Scientific and Technologic Development of Brazil (BJT-304804/2014-2). Yadira Boada thanks also grant FPI/2013-3242 of the Universitat Politecnica de Valencia
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dynamic estimations of metabolic fluxes with constraint-based models and possibility theory

  • Llaneras Estrada, Francisco
  • Sala, Antonio|||0000-0002-5691-8772
  • Picó, Jesús|||0000-0003-4144-3521
Living cells can be modelled by successively imposing known constraints that limit their behaviour, such as mass balances, thermodynamic laws or enzyme capacities. The resulting constraint-based models enclose all the functional states that the modelled cells may exhibit. Then, predictions can be obtained from the models in two main ways: adding experimental data to determine the state of cells at given conditions (MFA) or invoking an assumption of evolved optimal behaviour (FBA). Both MFA and FBA predictions are typically performed at steady state. However, it is easy to take extracellular dynamics into account. This work explores the benefits of using possibility theory to get these dynamic predictions. It will be shown that the possibilistic methods (a) provide rich estimates for time-varying fluxes and metabolite concentrations, (b) account for uncertainty and data scarcity, and (c) give predictions relaxing the optimality assumption of FBA. On the other hand, these methods could serve as basis for monitoring and fault detection systems in industrial bioprocesses., This research has been partially supported by the Spanish Government MINECO (1st and 3rd authors are grateful to grant CICYT DPI2011-28112-C04-01, and A. Sala is grateful to grant DPI2011-27845-C02-01).