Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 156
Encontrada(s) 2 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Introducción a la Diagnosis de Fallos basada en Modelos mediante Aprendizaje basado en Proyectos

  • Costa Castelló, Ramón
  • Puig, Vicenç
  • Blesa, Joaquim
[ES] La diagnosis de fallos basada en modelos es hoy en día un campo maduro dentro de la ingeniería de control que empieza a formar parte de los planes de estudios de grado y postgrado. Sin embargo, la falta de buenos materiales pedagógicos dificulta el proceso de enseñanza / aprendizaje. En este trabajo se muestra cómo una metodología de aprendizaje basada en proyectos se ha utilizado en las sesiones de laboratorio del curso de Diagnosis y Control Tolerante a Fallos del Máster en Automática y Robótica de la UPC utilizando un sistema real de tres depótodos. Los métodos de detección de fallos basados en observadores y la utilización de residuos estructurados para el aislamiento de fallos son introducidos a los estudiantes desde un punto de vista práctico, por medio de un conjunto de ejercicios que se proponen para alcanzar un conjunto de objetivos de aprendizaje., Este trabajo ha sido parcialmente financiado por la ayudas del Ministerio de Educación de España a través de los proyectos CICYT ECOCIS (ref. DPI2013-48243-C2-1-R) y CICYT HARCRICS (ref. DPI2014-58104-R).
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Implementación de un control fuzzy en el lazo de control de velocidad de un helicóptero coaxial no tripulado

  • Rubí Perelló, Bartomeu
[Resumen] El objetivo de este trabajo es el de estudiar el comportamiento de un controlador Fuzzy en el control de las velocidades lineales de un vehículo aéreo no tripulado, en el caso concreto de aplicación en un helicóptero coaxial en miniatura. Para ello, se parte de un sistema de control en cascada compuesto por un control de trayectoria, un control de velocidad y un control de actitud, y del cual ya se ha validado su funcionamiento de forma experimental. Este control, resultado de otro proyecto, muestra un correcto comportamiento respecto a sus especificaciones, pero demuestra una respuesta mejorable en el control de las velocidades. Por ello, en este artículo se muestran los resultados obtenidos al substituir este controlador, el cual anteriormente estaba implementado con un conjunto de controladores de tipo Proporcional- Derivativo, por un controlador inteligente de tipo Fuzzy. Los resultados muestran un comportamiento algo más rápido y más suave, por lo tanto se consigue mejorar el controlador de velocidad anterior., Este trabajo ha sido subvencionado por el Gobierno Español (MINISTERIO DE ECONOMIA Y COMPETITITVIDAD) y FEDER bajo el proyecto DPI2014- 58104-R (HARCRICS), https://doi.org/10.17979/spudc.9788497498081
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Robust sensor placement for leak location: analysis and design

  • Blesa, Joaquim
  • Nejjari, Fatiha
  • Sarrate, Ramon
In this paper, a nominal sensor placement methodology for leak location in water distribution networks is presented. To reduce the size and the complexity of the optimization problem a clustering technique is combined with the nominal sensor placement methodology. Some of the pressure sensor placement methods for leak detection and location in water distribution networks are based on the pressure sensitivity matrix analysis. This matrix depends on the network demands, which are nondeterministic, and the leak magnitudes, that are unknown. The robustness of the nominal sensor placement methodology is investigated against the fault sensitivity matrix uncertainty. Providing upon the dependency of the leak location procedure on the network operating point, the nominal sensor placement problem is then reformulated as a multi-objective optimization for which Pareto optimal solutions are generated. The robustness study as well as the resulting robust sensor placement methodology are illustrated by means of a small academic network as well as a district metered area in the Barcelona water distribution network, This work has been funded by the Spanish Ministry of Economy and Competitiveness through the CICYT projects ECOCIS (ref. DPI2013-48243-C2-1-R) and HARCRICS (ref. DPI2014-58104-R), and by the European Commission through contract EFFINET (ref. FP7-ICT2011-8-318556)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Stochastic model predictive control based on Gaussian processes applied to drinking water networks

  • Wang, Ye
  • Ocampo-Martínez, Carlos
  • Puig, Vicenç
This paper focuses on developing a stochastic model predictive control (MPC) strategy based on Gaussian Processes (GPs) for propagating system disturbances in a receding horizon way. Using a probabilistic system representation, the state trajectories considering the influence of disturbances can be obtained through the uncertainty propagation by using GPs. This fact allows obtaining the confidence intervals for state evolutions over the MPC prediction horizon that are included into the MPC objective function and constraints. The feasibility of the proposed MPC strategy considering the incorporated results of disturbance forecasting is also discussed. Simulation results obtained from the application of the proposed approach to the Barcelona drinking water network (DWN) taking real demand data into account are presented. The comparison with the well-known certainty-equivalent MPC shows the effectiveness of the proposed stochastic MPC approach., This work was supported by Spanish Government (Ministerio de Economía y Competitividad) and FEDER under project DPI2014-58104-R (HARCRICS). Moreover, this paper was partially supported by the research project ECOCIS DPI-2013-48243-C2-1-R of the Spanish Ministry of Science and by AGAUR Doctorat Industrial 2013-DI-041., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A practical test for assessing the reachability of discrete-time Takagi-Sugeno fuzzy systems

  • Witczak, Marcin
  • Rotondo, Damiano
  • Puig, Vicenç
  • Witczak, Piotr
This paper provides a necessary and sufficient condition for the reachability of discrete-time Takagi–Sugeno fuzzy systems that is easy to apply, such that it constitutes a practical test. The proposed procedure is based on checking if all the principal minors associated to an appropriate matrix are positive. If this condition holds, then the rank of the reachability matrix associated to the Takagi–Sugeno fuzzy system is full for any possible sequence of premise variables, and thus the system is completely state reachable. On the other hand, if the principal minors are not positive, the property of the matrix being a block P one with respect to a particular partition of a set of integers is studied in order to conclude about the reachability of the Takagi–Sugeno system. Examples obtained using an inverted pendulum are used to show that it is easy to check this condition, such that the reachability analysis can be performed efficiently using the proposed approach., This work has been funded by the National Science Centre of Poland under Grant: UMO-2013/11/B/ST7/01110, by the Spanish Ministry of Science and Technology through the projects CICYT ECOCIS (ref. DPI2013-48243-C2-1-R) and CICYT HARCRICS (ref. DPI2014-58104-R), by AGAUR through the contracts FI-DGR 2014 (ref. 2014FI_B1 00172) and FI-DGR 2015 (ref. 2015FI_B2 00171), and by the DGR of Generalitat de Catalunya (ref. 2014/SGR/374)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Optimal pressure sensor placement in water distribution networks minimizing leak location uncertainty

  • Nejjari, Fatiha
  • Sarrate, Ramon
  • Blesa, Joaquim
Trabajo presentado a: Computing and Control for the Water Industry (CCWI2015) Sharing the best practice in water management., Under a Creative Commons license, In this paper an optimal sensor placement strategy based on pressure sensitivity matrix analysis and an exhaustive search strategy that maximizes some diagnosis specifications for a water distribution network is presented. An average worst leak expansion distance as a new leak location performance measure has been proposed. This metric is later used to assess the leak location uncertainty provided by a sensor configuration. The method is combined with a clustering technique in order to reduce the size and the complexity of the sensor placement problem. The strategy is successfully applied to determine the location of a set of pressure sensors in a district metered area in the Barcelona water distribution network., This work has been funded by the Spanish Ministry of Economy and Competitiveness through the CICYT projects ECOCIS (ref. DPI2013-48243- C2-1-R) and HARCRICS (ref. DPI2014-58104-R), and by the European Commission through contract EFFINET (ref. FP7-ICT2011-8-318556)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

State estimation and fault detection using box particle filtering with stochastic measurements

  • Blesa, Joaquim
  • Gall, Françoise le
  • Jauberthie, Carine
  • Travé-Massuyès, Louise
Trabajo presentado al 26th International Workshop on Principles of Diagnosis (DX-15), celebrado en Paris (Francia) del 31 de agosto al 3 de septiembre de 2015., In this paper, we propose a box particle filtering algorithm for state estimation in nonlinear systems whose model assumes two types of ucertainties: stochastic noise in the measurements and bounded errors affecting the system dynamics.These assumptions respond to situations fre-quently encountered in practice. The proposed method includes a new way to weight the box particles as well as a new resampling procedure based on repartitioning the box enclosing the updated state. The proposed box particle filtering algorithm is applied in a fault detection schema illustrated by a sensor network target tracking example., This work has been partially funded by the Spanish Ministry of Science and Technology through the Project ECOCIS (Ref. DPI2013-48243-C2-1-R) and Project HARCRICS (Ref. DPI2014-58104-R)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Leak localization in water distribution networks using pressure residuals and classifiers

  • Ferrandez-Gamot, Lise
  • Busson, Pierre
  • Blesa, Joaquim
  • Tornil-Sin, Sebastian
  • Puig, Vicenç
  • Duviella, Eric
  • Soldevila, Adrià
Trabajo presentado al 9th IFAC Symposium on Fault Detection, Supervision and Safety for Technical Processes (SAFEPROCESS) celebrado en Paris (Francia) del 2 al 4 de septiembre de 2015., In order to take into account the scarcity of the water resource and the increasing of the population, the management of drinking water networks has to be improved with the use of new tools and actions that allows fighting against wasting water. The monitoring of drinking water networks is based on the use of sensors to locate malfunctions (leaks, quality/contamination events, etc.). Practical implementation has to be carried out by optimizing the placement of the number of sensors and improving the detection and localization of malfunctions. Techniques for the detection and localization of leaks have been proposed in the last years based on the evaluation of residuals obtained by means of the comparison between the measurements obtained by the sensors and the values obtained by simulating the water network in a leak free scenario. In this paper, a data-driven approach based on the use of statistical classifiers working in the residual space is proposed for leak localization. The classifiers are trained using leak data scenarios in all the nodes of the network considering uncertainty in demand distribution, additive noise in sensors and leak magnitude. Finally, the proposed approach is tested using the well-known Hanoi network benchmark., This work has been partially funded by the Spanish Ministry of Science and Technology through the Project ECOCIS (Ref. DPI2013-48243-C2-1-R) and Project HARCRICS (Ref. DPI2014-58104-R), and by EFFINET grant FP7-ICT-2012-318556 of the European Commission., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Combined holt-winters and GA trained ANN approach for sensor validation and reconstruction: Application to water demand flowmeters

  • Rodríguez-Rangel, Héctor
  • Puig, Vicenç
  • Flores, Juan J.
  • López Farías, Rodrigo
Trabajo presentado a la 3rd Conference on Control and Fault Tolerant Systems, celebrada en Barcelona (España) del 7 al 9 de septiembre de 2016., This paper proposes a Double Seasonal Holt-Winters (DSHW) forecasting model with an auxiliary Artificial Neural Network (ANN) trained with a Genetic Algorithm (GA) to model the DSHW residuals. ANN complements and improves the DSHW prediction. The proposed model also includes an online validation and reconstruction mechanism useful to detect and correct missing and erroneous data. This mechanism also impacts improving the DSHW prediction accuracy and precision. The proposed model and validation mechanism are applied to predict the time series generated by two monitored flowmeters of two sectors of Barcelona's drinking water network (DWN). The accuracy and precision improvement of the proposed method with respected to standard DSHW and ARIMA approaches is provided., This work has been partially funded by the Spanish Government (MINECO) through the project CICYT-ECOCIS (ref. DPI2013-48243-C2-1-R), by MINECO and FEDER through the project CICYT - HARCRICS (ref. DPI2014-58104-R), Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

An LMI approach to robust fault estimation for a class of nonlinear systems

  • Witczak, Marcin
  • Buciakowski, Mariusz
  • Puig, Vicenç
  • Rotondo, Damiano
  • Nejjari, Fatiha
The paper presents a robust fault estimation approach for a class of nonlinear discrete-time systems. In particular, two sources of uncertainty are present in the considered class of systems, that is, an unknown input and an exogenous external disturbance. Thus, apart from simultaneous state and fault estimation, the objective is to decouple the effect of an unknown input while minimizing the influence of the exogenous external disturbance within the framework. The resulting design procedure guarantees that a prescribed disturbance attenuation level is achieved with respect to the state and fault estimation error while assuring the convergence of the observer. The core advantage of the proposed approach is its simplicity by reducing the fault estimation problem to matrix inequalities formulation. In addition, the design conditions ensure the convergence of the observer with guaranteed performance. The effectiveness of the proposed approach is demonstrated by its application to a twin rotor multiple-input multiple-output system., The work was supported by the National Science Centre of Poland under grant no. 2013/11/B/ST7/01110. This work has also been partially funded by the Spanish Ministry of Science and Technology through the projects CICYT ECOCIS (ref. DPI2013- 48243-C2-1-R) and CICYT HARCRICS (ref. DPI2014-58104-R) by AGAUR through the contract FI-DGR 2014 (ref. 2014FI_B1_00172) and by the DGR of the Generalitat de Catalunya (ref. 2014/SGR/374)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

A fault hiding approach for the sliding mode fault-tolerant control of a non-holonomic mobile robot

  • Stancu, Alexandru
  • Codres, Eduard
  • Puig, Vicenç
Trabajo presentado a la 3rd Conference on Control and Fault Tolerant Systems, celebrada en Barcelona (España) del 7 al 9 de septiembre de 2016., When mobile robots are intended to be used in hazardous environments or for long-time operations, it is needed to increase their robustness against faults. This could be achieved by means of the inclusion of Fault Tolerant Control (FTC) mechanisms. In this paper, a FTC based on fault hiding approach is proposed for a non-holonomic mobile robot. First, a Sliding Mode Controller (SMC) is designed to control the robost and to cope with modelling uncertainty. Later on, it is enhanced to take into account actuator faults leading to a fault hiding approach for the sliding mode fault tolerant control of the robot. Results using simulated fault scenarios are presented to illustrate the performance of the proposed approach., This work has been partially funded by the Spanish Government (MINECO) through the project CICYT ECOCIS (ref. DPI2013-48243-C2-1-R), by MINECO and FEDER through the project CICYT HARCRICS (ref. DPI2014-58104-R)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Actuator multiplicative fault estimation in discrete-time LPV systems using switched observers

  • Rotondo, Damiano
  • López-Estrada, Francisco-Ronay
  • Nejjari, Fatiha
  • Ponsart, Jean-Christophe
  • Theilliol, Didier
  • Puig, Vicenç
This paper proposes an observer for the joint state and fault estimation devoted to discrete-time linear parameter varying (LPV) systems subject to actuator faults. The major contribution of this work is that the observer is able to estimate multiplicative faults, contrarily to the existing approaches, that consider additive faults. The main characteristic of this observer is that it is scheduled not only by means of the endogenous varying parameters of the faulty model, but also by the input vector. Another contribution of this paper consists in adding a switching component in order to guarantee the feasibility of the conditions for designing the observer gains. It is proved that, as long as the input sequence satisfies some characteristics, the convergence of the observer error dynamics to zero is assured. A numerical example is used to demonstrate the effectiveness of the proposed strategy., This work has been funded by the Spanish Government (MINECO) through the projects CICYT ECOCIS (ref. DPI2013-48243-C2-1-R), by MINECO and FEDER through the project CICYT HARCRICS (ref. DPI2014-58104-R), by AGAUR through the contracts FI-DGR 2014 (ref. 2014FI_B1 00172) and FI-DGR 2015 (ref. 2015FI_B2 00171), by the DGR of Generalitat de Catalunya (SAC group Ref. 2014/SGR/374), and by the National Council of Science and Technology (CONACyT) of Mexico., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Detection of icing and actuators faults in the longitudinal dynamics of small UAVs using an LPV proportional integral unknown input observer

  • Rotondo, Damiano
  • Cristofaro, Andrea
  • Arne Johansen, Tor
  • Nejjari, Fatiha
  • Puig, Vicenç
Trabajo presentado a la 3rd Conference on Control and Fault Tolerant Systems, celebrada en Barcelona (España) del 7 al 9 de septiembre de 2016., This paper proposes a linear parameter varying proportional integral unknown input observer (PI-UIO) for the diagnosis of actuator faults and icing in unmanned aerial vehicles. It is shown that in presence of sensor noise, the proposed PI-UIO has the advantage of being affected by the noise, but not by its derivative. Another contribution of the paper is the introduction of an icing to wind/noise ratio, which allows performing an optimal tuning of some PI-UIO design parameters. Results obtained with a Zagi Flying Wing simulator are used to validate the effectiveness of the proposed approach., This work has been supported by a grant from Iceland, Liechtenstein and Norway through the EEA Financial Mechanism. Operated by Universidad Complutense de Madrid (ref. 006-ABEL-IM-2014B). The authors also acknowledge support by the Spanish Government (Ministerio de Economía y Competividad) and FEDER through the projects CICYT ECOCIS (ref. DPI2013-48243-C2-1-R) and CICYT HARCRICS (ref. DPI2014-58104-R), by AGAUR through the contract FI-DGR 2014 (ref. 2014FI_B1_00172), by the DGR of the Generalitat de Catalunya (ref. 2014/SGR/374) and by the Research Council of Norway through the Centres of Excellence funding scheme (ref. 223254-NTNU AMOS). D. Rotondo and A. Cristofaro are also supported by the ERCIM Alain Bensoussan Fellowship programme., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dilated LMI characterization for the robust finite time control of discrete-time uncertain linear systems

  • Rotondo, Damiano
  • Nejjari, Fatiha
  • Puig, Vicenç
This paper provides new dilated linear matrix inequalities (LMIs) characterizations for the finite time boundedness (FTB) and the finite time stability (FTS) analysis of discrete-time uncertain linear systems. The dilated LMIs are later used to design a robust controller for the finite time control of discrete-time uncertain linear systems. The relevant feature of the proposed approach is the decoupling between the Lyapunov and the system matrices, that allows considering a parameter-dependent Lyapunov function. In this way, the conservativeness with respect to previous results is decreased. Numerical examples are used to illustrate the results., This work has been funded by the Spanish MINECO through the projects CICYT ECOCIS (ref. DPI2013-48243-C2-1-R) and CICYT HARCRICS (Ref. DPI2014-58104-R), by AGAUR through the contracts FI-DGR 2014 (ref. 2014FI B1 00172) and FI-DGR 2015 (ref. 2015FI B2 00171) and by the DGR of Generalitat de Catalunya (SAC group Ref. 2014/SGR/374)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Fault tolerance evaluation of nonlinear systems using viability theory

  • Zarch, Majid Ghaniee
  • Poshtan, Javad
  • Puig, Vicenç
Trabajo presentado a la 3rd Conference on Control and Fault Tolerant Systems, celebrada en Barcelona (España) del 7 al 9 de septiembre de 2016., This paper presents a computational procedure based on viability theory to evaluate the fault tolerance admissibility of a given fault configuration of a nonlinear system controlled by means of a predictive control law. The admissible solution set for the control problem, including the effect of faults, is determined using viability kernel and capture basin. Finally, water heater part of pasteurization process is provided as benchmark in order to show the usefulness of viability theory for fault tolerance evaluation., This work has been partially funded by the Spanish Government (MINECO) through the project CICYT ECOCIS (ref. DPI2013-48243-C2-1-R), by MINECO and FEDER through the project CICYT HARCRICS (ref. DPI2014-58104-R)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fault tolerant control of a proton exchange membrane fuel cell using Takagi–Sugeno virtual actuators

  • Rotondo, Damiano
  • Nejjari, Fatiha
  • Puig, Vicenç
In this paper, a fault tolerant control (FTC) strategy for proton exchange membrane (PEM) fuel cells based on the use of virtual actuators and the Takagi–Sugeno (TS) approach is proposed. The overall solution relies on adding a virtual actuator in the control loop to hide the fault from the controller point of view, allowing it to see the same plant as before the fault, such that the stability and some desired performances are preserved. The proposed methodology is based on the use of a reference model, where the resulting nonlinear error model is brought to a Takagi–Sugeno form using a gridding approach. The TS model is suitable for designing a controller using linear matrix inequalities (LMI)-based techniques, such that the resulting closed-loop error system is stable with poles placed in some desired region of the complex plane. Simulation results are used to show the effectiveness of the proposed approach., This work has been funded by the Spanish Government (MINECO) through the project CICYT ECOCIS (ref. DPI2013-48243-C2-1-R), by MINECO and FEDER through the project CICYT HARCRICS (ref. DPI2014-58104-R), by AGAUR through the contracts FI-DGR 2014 (ref. 2014FI_B1 00172) and FI-DGR 2015 (ref. 2015FI_B2 00171) and by the DGR of Generalitat de Catalunya (SAC group Ref. 2014/SGR/374). Damiano Rotondo also acknowledges support by the Research Council of Norway through the Centers of Excellence funding scheme, Project number 223254 – Centre for Autonomous Marine Operations and Systems (NTNU-AMOS)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Gain-scheduling multivariable LPV control of an irrigation canal system

  • Bolea, Yolanda
  • Puig, Vicenç
The purpose of this paper is to present a multivariable linear parameter varying (LPV) controller with a gain scheduling Smith Predictor (SP) scheme applicable to open-flow canal systems. This LPV controller based on SP is designed taking into account the uncertainty in the estimation of delay and the variation of plant parameters according to the operating point. This new methodology can be applied to a class of delay systems that can be represented by a set of models that can be factorized into a rational multivariable model in series with left/right diagonal (multiple) delays, such as, the case of irrigation canals. A multiple pool canal system is used to test and validate the proposed control approach., This work has been funded by the Spanish Government (MINECO) through the project CICYT ECOCIS (Ref. DPI2013-48243-C2-1-R) and by MINECO and FEDER through the project CICYT HARCRICS (Ref. DPI2014-58104-R)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Leak localization in water distribution networks using a mixed model-based/data-driven approach

  • Soldevila, Adrià
  • Tornil-Sin, Sebastian
  • Blesa, Joaquim
  • Duviella, Eric
  • Fernández Cantí, Rosa M.
  • Puig, Vicenç
This paper proposes a new method for leak localization in water distribution networks (WDNs). In a first stage, residuals are obtained by comparing pressure measurements with the estimations provided by a WDN model. In a second stage, a classifier is applied to the residuals with the aim of determining the leak location. The classifier is trained with data generated by simulation of the WDN under different leak scenarios and uncertainty conditions. The proposed method is tested both by using synthetic and experimental data with real WDNs of different sizes. The comparison with the current existing approaches shows a performance improvement., This work has been funded by the Spanish Government (MINECO) through the project CICYT ECOCIS (ref. DPI2013-48243-C2-1-R), by MINECO and FEDER through the project CICYT HARCRICS (ref. DPI2014-58104-R), by MINECO through the grant IJCI-2014-2081, by the DGR of Generalitat de Catalunya (SAC group Ref. 2014/SGR/374), by the AGAUR of Generalitat de Catalunya through the grant 2014PDJ00102 and by EFFINET grant FP7-ICT-2012-318556 of the European Commission., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Optimal sensor placement for classifier-based leak localization in drinking water networks

  • Soldevila, Adrià
  • Tornil-Sin, Sebastian
  • Fernández Cantí, Rosa M.
  • Blesa, Joaquim
  • Puig, Vicenç
  • Puig, Vicenç
Trabajo presentado a la 3rd Conference on Control and Fault Tolerant Systems, celebrada en Barcelona (España) del 7 al 9 de septiembre de 2016., This paper presents a sensor placement method for classifier-based leak localization in Water Distribution Networks. The proposed approach consists in applying a Genetic Algorithm to decide the sensors to be used by a classifier (based on the k-Nearest Neighbor approach). The sensors are placed in an optimal way maximizing the accuracy of the leak localization. The results are illustrated by means of the application to the Hanoi District Metered Area and they are compared to the ones obtained by the Exhaustive Search Algorithm. A comparison with the results of a previous optimal sensor placement method is provided as well., This work has been partially funded by the Spanish Government (MINECO) through the project CICYT ECOCIS (ref. DPI2013-48243-C2-1-R), by MINECO and FEDER through the project CICYT HARCRICS (ref. DPI2014-58104-R), by MINECO through the grant IJCI-2014-2081, by EFFINET grant FP7-ICT-2012-318556 of the European Commission, by the DGR of Generalitat de Catalunya (SAC group Ref. 2014/SGR/374) and by the AGAUR of Generalitat de Catalunya through the grants FI-DGR 2015 (ref. 2015 FI B 00591) and 2014PDJ00102., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reliable fault-tolerant model predictive control of drinking water transport networks

  • Robles, Deneb
  • Puig, Vicenç
  • Ocampo-Martínez, Carlos
  • Garza-Castañón, Luis E.
This paper proposes a reliable fault-tolerant model predictive control applied to drinking water transport networks. After a fault has occurred, the predictive controller should be redesigned to cope with the fault effect. Before starting to apply the fault-tolerant control strategy, it should be evaluated whether the predictive controller will be able to continue operating after the fault appearance. This is done by means of a structural analysis to determine loss of controllability after the fault complemented with feasibility analysis of the optimization problem related to the predictive controller design, so as to consider the fault effect in actuator constraints. Moreover, by evaluating the admissibility of the different actuator-fault configurations, critical actuators regarding fault tolerance can be identified considering structural, feasibility, performance and reliability analyses. On the other hand, the proposed approach allows a degradation analysis of the system to be performed. As a result of these analyses, the predictive controller design can be modified by adapting constraints such that the best achievable performance with some pre-established level of reliability will be achieved. The proposed approach is tested on the Barcelona drinking water transport network., This work has been partially funded by MINECO and FEDER through the Project ECOCIS (Ref. DPI2013-48243-C2-1-R) and Project HARCRICS (Ref. DPI2014-58104-R)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Robust fault diagnosis of proton exchange membrane fuel cells using a Takagi-Sugeno interval observer approach

  • Rotondo, Damiano
  • Fernández Cantí, Rosa M.
  • Tornil-Sin, Sebastian
  • Blesa, Joaquim
  • Puig, Vicenç
In this paper, the problem of robust fault diagnosis of proton exchange membrane (PEM) fuel cells is addressed by introducing the Takagi-Sugeno (TS) interval observers that consider uncertainty in a bounded context, adapting TS observers to the so-called interval approach. Design conditions for the TS interval observer based on regional pole placement are also introduced to guarantee the fault detection and isolation (FDI) performance. The fault detection test is based on checking the consistency between the measurements and the output estimations provided by the TS observers. In presence of bounded uncertainty, this check relies on determining if all the measurements lie inside their corresponding estimated interval bounds. When a fault is detected, the measurements that are inconsistent with their corresponding estimations are annotated and a fault isolation procedure is triggered. By using the theoretical fault signature matrix (FSM), which summarizes the effects of the different faults on the available residuals, the fault is isolated by means of a logic reasoning that takes into account the bounded uncertainty, and if the number of candidate faults is more than one, a correlation analysis is used to obtain the most likely fault candidate. Finally, the proposed approach is tested using a PEM fuel cell case study proposed in the literature., This work has been funded by the Spanish Government (MINECO) through the project CICYT ECOCIS (ref. DPI2013-48243-C2-1-R), by MINECO and FEDER through the project CICYT HARCRICS (ref. DPI2014-58104-R), by AGAUR through the contracts FI-DGR 2014 (ref. 2014FI_B1 00172) and FI-DGR 2015 (ref. 2015FI_B2 00171) and by the DGR of Generalitat de Catalunya (SAC group Ref. 2014/SGR/374)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Sensor placement for leak monitoring in drinking water networks combining clustering techniques and a semi-exhaustive search

  • Sarrate, Ramon
  • Blesa, Joaquim
  • Nejjari, Fatiha
Trabajo presentado a la 3rd Conference on Control and Fault Tolerant Systems, celebrada en Barcelona (España) del 7 al 9 de septiembre de 2016., This paper presents an optimal sensor placement strategy based on pressure sensitivity matrix analysis and a semi-exhaustive search strategy that maximizes some diagnosis specifications for water distribution networks. A mean average worst leak expansion distance has been proposed as a new leak location performance measure. The approach is combined with a clustering technique in order to reduce the size and the complexity of the sensor placement problem. The strategy is successfully applied to determine the location of a set of pressure sensors in a district metered area (DMA) in the Barcelona water distribution network (WDN)., This work has been funded by the Spanish Government (MINECO) through the project CICYT ECOCIS (ref. DPI2013-48243-C2-1-R), by MINECO and FEDER through the project CICYT HARCRICS (ref. DPI2014-58104-R), by MINECO through the grant IJCI-2014-2081, by the DGR of Generalitat de Catalunya (SAC group Ref. 2014/SGR/374), by the AGAUR of Generalitat de Catalunya through the grant 2014PDJ00102 and by EFFINET grant FP7-ICT-2012-318556 of the European Commission., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Robust state estimation and fault detection combining unknown input observer and set-membership approach

  • Xu, Feng
  • Tan, Junbo
  • Wang, Xueqian
  • Puig, Vicenç
  • Liu, Houde
  • Liang, Bin
  • Yuan, Bo
Trabajo presentado a la 3rd Conference on Control and Fault Tolerant Systems, celebrada en Barcelona (España) del 7 al 9 de septiembre de 2016., This paper aims to propose a new robust state estimation and fault-detection method by combining the unknown input observer (UIO) and the set-membership estimator (SME). It is known that both the SUIO and the SME can be used to estimate the states of a system. The former aims to obtain a particular value by actively decoupling the effect of unknown inputs, while the latter can obtain state-estimation sets by prediction and correction based on the set theory. Instead of particular state values, the latter can obtain state-estimation sets guaranteeing to contain system states (i.e., robust state estimation). In this paper, we propose to use the framework of the UIO to actively decouple part of unknown inputs and then further employ the set-membership estimation method to estimate state sets and detect faults. The objective of the proposed method is to reduce the conservatism of robust state estimation sets by using the UIO to remove the contribution of part of unknown inputs to the sizes of state-estimation sets. At the end of this paper, a numerical example is used to illustrate the effectiveness and advantages of the proposed approach., This work has been supported by the Natural Science Foundation of Guangdong (China) (No.2015A030313881), the Shenzhen Key Lab of Space Robotic Technology and Telescience (China), the Spanish Government (MINECO) through the project CICYT ECOCIS (ref. DPI2013-48243-C2-1-R), and MINECO and FEDER through the project CICYT HARCRICS (ref. DPI2014-58104-R)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Robust unknown input observer for state and fault estimation in discrete-time Takagi-Sugeno systems

  • Rotondo, Damiano
  • Witczak, Marcin
  • Puig, Vicenç
  • Nejjari, Fatiha
  • Pazera, Marcin
In this paper, a robust unknown input observer (UIO) for the joint state and fault estimation in discrete-time Takagi-Sugeno (TS) systems is presented. The proposed robust UIO, by applying the framework, leads to a less restrictive design procedure with respect to recent results found in the literature. The resulting design procedure aims at achieving a prescribed attenuation level with respect to the exogenous disturbances, while obtaining at the same time the convergence of the observer with a desired bound on the decay rate. An extension to the case of unmeasurable premise variables is also provided. Since the design conditions reduce to a set of linear matrix inequalities that can be solved efficiently using the available software, an evident advantage of the proposed approach is its simplicity. The final part of the paper presents an academic example and a real application to a multi-tank system, which exhibit clearly the performance and effectiveness of the proposed strategy., This work has been funded by the National Science Centre in Poland under the grant 2013/11/B/ST7/01110, by the Spanish Government (MINECO) through the project CICYT ECOCIS (ref. DPI2013-48243-C2-1-R), by MINECO and FEDER through the project CICYT HARCRICS (ref. DPI2014-58104-R), by AGAUR through the contracts FI-DGR 2014 (ref. 2014FI_B1 00172) and FIDGR 2015 (ref. 2015FI_B2 00171), and by the DGR of Generalitat de Catalunya (SAC group Ref. 2014/SGR/374)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Uncertainty effect on leak localisation in a DMA

  • Pérez, Ramon
  • Cugueró, Josep
  • Blesa, Joaquim
  • Cugueró-Escofet, Miquel Àngel
  • Sanz, Gerard
Trabajo presentado a la 3rd Conference on Control and Fault Tolerant Systems, celebrada en Barcelona (España) del 7 al 9 de septiembre de 2016., The leak localisation methodologies based on data and models are affected by both uncertainties in the model and in the measurements. This uncertainty should be quantified so that its effect on the localisation methods performance can be estimated. In this paper, a model-based leak localisation methodology is applied to a real District Metered Area using synthetic data. In the generation process of the data, uncertainty in demands is taken into account. This uncertainty was estimated so that it can justify the uncertainty observed in the real measurements. The leak localisation methodology consists, first, in generating the set of possible measurements, obtained by Monte Carlo Simulation under a certain leak assumption and considering uncertainty, and second, in falsifying sets of nodes using the correlation with a leak residual model in order to signal a set of possible leaky nodes. The assessment is done by means of generating the confusion matrix with a Monte Carlo approach., This work was partially supported by Spanish Government (MINISTERIO ECNONOMIA Y COMPETITIVIDAD) and FEDER under projects DPI2014-58104-R (HARCRICS), DPI-2013-48243-C2-1-R (ECOCIS), the grant IJCI-2014-2081, the Polytechnic University of Catalunya (UPC), EFFINET grant FP7-ICT-2012-318556 of the European Commission and by the Catalan Agency for Management of University and Research Grants (AGAUR) through the grant 2014PDJ00102., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Virtual actuator-based FTC for LPV systems with saturating actuators and FDI delays

  • Rotondo, Damiano
  • Ponsart, Jean-Christophe
  • Nejjari, Fatiha
  • Theilliol, Didier
  • Puig, Vicenç
Trabajo presentado a la 3rd Conference on Control and Fault Tolerant Systems, celebrada en Barcelona (España) del 7 al 9 de septiembre de 2016., The main contribution of this paper consists in solving the problem of fault tolerant control (FTC) for linear parameter varying (LPV) systems subject to actuator saturation and fault detection and isolation (FDI) delays. The FTC is based on virtual actuators that reconfigure the faulty plant to maintain the stability and to avoid the saturation of the actuators. On the other hand, a design methodology that provides the nominal output-feedback controller, which maximizes the tolerated delay between the fault occurrence and its isolation, is developed. The design process consists in finding the optimal feasible solution to a finite set of linear matrix inequalities (LMIs). Finally, an example is used to illustrate the theoretical results., This work has been funded by the Spanish Government (MINECO) through the project CICYT ECOCIS (ref. DPI2013-48243-C2-1-R), by MINECO and FEDER through the project CICYT HARCRICS (ref. DPI2014-58104-R), by AGAUR through the contract FI-GR 2015 (ref.2015FI_B200171) and by the DGR of Generalitat de Catalunya (SAC group Ref. 2014/SGR/374). D. Rotondo also acknowledges that part of this work was carried out during the tenure of an ERCIM Alain Bensoussan Fellowship Programme and that it was partly supported by the Research Council of Norway through the Centres of Excellence funding scheme, Project number 223254., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Zonotopic fault detection observer with H_ performance

  • Wang, Ye
  • Zhou, Meng
  • Puig, Vicenç
  • Cembrano, Gabriela
  • Wang, Zhenhua
Trabajo presentado a la 36th Chinese Control Conference (CCC), celebrada en Dalian (China) del 26 al 28 de julio de 2017., This paper proposes a robust fault detection observer based on zonotopes for discrete-time uncertain systems with sensor faults and unknown but bounded uncertainties. The main advantage of this method is that the observer gain of the robust zonotopic observer is designed to be robust against bounded uncertainties while being sensitive to faults. In order to detect sensor faults with low magnitudes, the fault sensitivity is taken into account by measuring the H_ performance. The designed zonotopic observer gain can be obtained by solving an optimization problem including a sequence of linear matrix inequalities (LMIs). Finally, an illustrative example is provided to demonstrate the proposed method., This work has been partially funded by the Spanish Government and FEDER through the projects CICYT ECOCIS (ref. DPI2013-48243-C2-1-R), CICYT DEOCS (ref. DPI2016-76493-C3-3-R), CICYT HARCRICS (ref. DPI2014-58104-R) and by National Natural Science Foundation of China (Grant No. 61273162, 61403104)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Zonotopic fault estimation filter design for discrete-time descriptor systems

  • Wang, Ye
  • Wang, Zhenhua
  • Puig, Vicenç
  • Cembrano, Gabriela
Trabajo presentado al 20th IFAC (International Federation of Automatic Control) World Congress, celebrado en Toulouse (Francia) del 9 al 14 de julio de 2017., This paper considers actuator-fault estimation for discrete-time descriptor systems with unknown but bounded system disturbance and measurement noise. A zonotopic fault estimation filter is designed based on the analysis of fault detectability indexes. To ensure estimation accuracy, the filter gain in the zonotopic fault estimation filter is optimized through the zonotope minimization. The designed zonotopic filter not only can estimate fault magnitudes, but it also provides fault estimation results in an interval, i.e. the upper and lower bounds of fault magnitudes. Moreover, the proposed fault estimation filter has a non-singular structure and hence is easy to implement. Finally, simulation results are provided to illustrate the effectiveness of the proposed method., This work has been partially funded by the Spanish Government and FEDER through the projects CICYT ECOCIS (ref. DPI2013-48243-C2-1-R), CICYT DEOCS (ref. DPI2016-76493-C3-3-R), CICYT HARCRICS (ref. DPI2014-58104-R) and by National Natural Science Foundation of China (Grant No. 61273162, 61403104)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Set-valued observer-based active fault-tolerant model predictive control

  • Xu, Feng
  • Puig, Vicenç
  • Ocampo-Martínez, Carlos
  • Wang, Xueqian
This paper proposes an integrated actuator and sensor active fault-tolerant model predictive control scheme. In this scheme, fault detection is implemented by using a set-valued observer, fault isolation (FI) is performed by set manipulations, and fault-tolerant control is carried out through the design of a robust model predictive control law. In this paper, a set-valued observer is used to passively complete the fault detection task, while FI is actively performed by making use of the constraint-handling capability of robust model predictive control. The set-valued observer is chosen to implement fault detection and isolation (FDI) because of its simple mathematical structure that is not affected by the type of faults such as sensor, actuator, and system-structural faults. This means that only one set-valued observer is needed to monitor all considered actuator and sensor statuses (health and fault) and to carry out the fault detection and isolation task instead of using a bank of observers (each observer matching a health/fault status). Furthermore, in the proposed scheme, the advantage of robust model predictive control is that it can effectively deal with system constraints, disturbances, and noises and allow to implement an active FI strategy, which can improve FI sensitivity when compared with the passive FI methods. Finally, a case study based on the well-known two-tank system is used to illustrate the effectiveness of the proposed fault-tolerant model predictive control scheme., This work has been partially funded by the Spanish Government (MINECO) through the project CICYT ECOCIS (ref. DPI2013-48243-C2-1-R), MINECO and FEDER through the project CICYT HARCRICS (ref. DPI2014- 58104-R), the Natural Science Foundation of Guangdong (No.2015A030313881), the National Natural Science Foundation of China (No.61673239), and the Shenzhen Key Lab of Space Robotic Technology and Telescience., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Short-term demand forecast using a bank of neural network models trained using genetic algorithms for the optimal management of drinking water networks

  • Rodríguez-Rangel, Héctor
  • Puig, Vicenç
  • López Farías, Rodrigo
  • Flores, Juan J.
Efficient management of a drinking water network reduces the economic costs related to water production and transport (pumping). Model predictive control (MPC) is nowadays a quite well-accepted approach for the efficient management of the water networks because it allows formulating the control problem in terms of the optimization of the economic costs. Therefore, shortterm forecasts are a key issue in the performance of MPC applied to water distribution networks. However, the short-term horizon demand forecast in a horizon of 24 hours in an hourly based scale presents some challenges as the water consumption can change from one day to another, according to certain patterns of behavior (e.g., holidays and business days). This paper focuses on the problem of forecasting water demand for the next 24 hours. In this work, we propose to use a bank of models instead of a single model. Each model is designed for forecasting one particular hour. Hourly models use artificial neural networks. The architecture design and the training process are performed using genetic algorithms. The proposed approach is assessed using demand data from the Barcelona water network., The present work has been developed while Hector Rodriguez was on a postdoctoral position at Universidad Politécnica de Cataluña under postdoctoral grant 237429, supported by CONACYT. He thanks the CSIC-UPC (Institut de Robòtica i Informàtica Industrial) for all the resources and accommodations that made his visit at the university possible. This work has also been partially funded by the Spanish Government (MINECO) through the project CICYT ECOCIS (ref. DPI2013-48243-C2-1-R), by MINECO and FEDER through the project CICYT HARCRICS (ref. DPI2014-58104-R)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sensor-fault tolerance using robust MPC with set-based state estimation and active fault isolation

  • Xu, Feng
  • Olaru, Sorin
  • Puig, Vicenç
  • Ocampo-Martínez, Carlos
  • Niculescu, Silviu-Iulian
In this paper, a sensor fault-tolerant control scheme using robust model predictive control (MPC) and set-theoretic fault detection and isolation (FDI) is proposed. The robust MPC controller is used to control the plant in the presence of process disturbances and measurement noises while implementing a mechanism to tolerate faults. In the proposed scheme, fault detection (FD) is passive based on interval observers, while fault isolation (FI) is active by means of MPC and set manipulations. The basic idea is that for a healthy or faulty mode, one can construct the corresponding output set. The size and location of the output set can be manipulated by adjusting the size and center of the set of plant inputs. Furthermore, the inputs can be adjusted on-line by changing the input-constraint set of the MPC controller. In this way, one can design an input set able to separate all output sets corresponding to all considered healthy and faulty modes from each other. Consequently, all the considered healthy and faulty modes can be isolated after detecting a mode changing while preserving feasibility of MPC controller. As a case study, an electric circuit is used to illustrate the effectiveness of the proposed scheme., This work was supported by the DGR of Generalitat de Catalunya (SAC group Ref. Ref. 2014/SRG/374), by MINECO and FEDER through the project CICYT HARCRICS (ref. DPI2014-58104-R) China Scholarship Council, CNRS-Supélec, Automatic Control Department, Supélec, France, the Natural Science Foundation of Guangdong (No. 2015A030313881) and the Shenzhen Key Lab of Space Robotic Technology and Telescience., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Robust optimization based energy dispatch in smart grids considering simultaneously multiple uncertainties: Load demands and energy prices

  • Nassourou, M.
  • Puig, Vicenç
  • Blesa, Joaquim
Trabajo presentado al 20th IFAC (International Federation of Automatic Control) World Congress, celebrado en Toulouse (Francia) del 9 al 14 de julio de 2017., Solving the problem of energy dispatch in a heterogeneous complex system is not a trivial task. The problem becomes even more complex considering uncertainties in demands and energy prices. This paper discusses the development of several Economic Model Predictive Control (EMPC) based strategies for solving an energy dispatch problem in a smart micro-grid. The smart grid components are described using control-oriented model approach. Considering uncertainty of load demands and energy prices simultaneously, and using an economic objective function, leads to a non-linear non-convex problem. The technique of using an affine dependent controller is used to convexify the problem. The goal of this research is the development of a controller based on EMPC strategies that tackles both endogenous and exogenous uncertainties, in order to minimize economic costs and guarantee service reliability of the system. The developed strategies have been applied to a hybrid system comprising some photovoltaic (PV) panels, a wind generator, a hydroelectric generator, a diesel generator, and some storage devices interconnected via a DC Bus. Additionally, a comparison between the standard EMPC, and its combination with MPC tracking in single-layer and two-layer approaches was also carried out based on the daily cost of energy production., This work was funded by the Ministerio de Economía, Industria y Competitividad (MEICOMP) of the Spanish Government and FEDER through the  project HARCRICS (ref. DPI2014-58104-R) and the grant IJCI-2014-20801.  , Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Robust periodic economic predictive control based on interval arithmetic for water distribution networks

  • Wang, Ye
  • Blesa, Joaquim
  • Puig, Vicenç
Trabajo presentado al 20th IFAC (International Federation of Automatic Control) World Congress, celebrado en Toulouse (Francia) del 9 al 14 de julio de 2017., This paper addresses a robust periodic economic model predictive control (EMPC) based on interval arithmetic with unknown-but-bounded additive disturbances for the management of water distribution networks (WDNs). The system constraints in presence of system disturbances are tightened along the prediction horizon by means of the proposed interval arithmetic and considering that system variables in the WDN model are also subject to some algebraic equations. These algebraic equations should be satisfied when the disturbances have effects on those system variables. The EMPC controller is designed with adding the terminal state constraint. The periodically optimal steady states are obtained by employing a periodic EMPC planner with the nominal model. This periodic steady states are subsequently used to be terminal states. The on-line robust constraint satisfactions are implemented into the robust periodic EMPC controller. Finally, the proposed control strategy is verified using a case study., This work has been partially funded by the Spanish Government and FEDER through the projects CICYT ECOCIS (ref. DPI2013-48243-C2-1-R), CICYT DEOCS (ref. DPI2016-76493-C3-3-R) and CICYT HARCRICS (ref. DPI2014-58104-R)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Reduced-order interval-observer design for dynamic systems with time-invariant uncertainty

  • Pourasghar, Masoud
  • Puig, Vicenç
  • Ocampo-Martínez, Carlos
  • Zhang, Qinghua
Trabajo presentado al 20th IFAC (International Federation of Automatic Control) World Congress, celebrado en Toulouse (Francia) del 9 al 14 de julio de 2017., This paper addresses the design of reduced-order interval-observers for dynamic systems with time-invariant uncertainty. Because of the limitations of using the set-based approach to preserve the time dependency of parameter uncertainty and the wrapping effect to deal with interval-observers, the trajectory-based interval-observer approach is used with an appropriate observer gain. But, there could be some difficulties to satisfy the conditions for selecting a suitable gain to guarantee the positivity of the resulting observer. Then, a reduced-order observer is designed to reduce the computational complexity and to increase the degree of freedom when selecting the observer gain. Finally, a simulation example is employed for illustrating and analyzing the effectiveness of the proposed approach., This work has been partially funded by the Spanish Government through the project DEOCS (ref. DPI2016-76493-C3-3-R), by MINECO and FEDER through the project HARCRICS (ref. DPI2014-58104-R) and by Agencia de Gestio d’Ajuts Universitaris i de Recerca., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Optimal management of barcelona water distribution network using non-linear model predictive control

  • Wang, Ye
  • Cembrano, Gabriela
  • Puig, Vicenç
  • Urrea, Maite
  • Romera, Juli
  • Saporta, David
  • Valero, J. G.
  • Quevedo, Joseba
Trabajo presentado al 20th IFAC (International Federation of Automatic Control) World Congress, celebrado en Toulouse (Francia) del 9 al 14 de julio de 2017., This paper presents a non-linear optimal control strategy for the operational management of water distribution networks (WDNs) including both flow and hydraulic head/pressure constraints. The optimal operation of WDNs should guarantee water supply with suitable pressures at all the demand nodes in the network. The challenge for non-linear model predictive control in this context is to compute control strategies for the pumps and valves in a WDN to supply the required demand while optimizing performance goals related to cost and safety. A two-layer scheme is used in order to produce set-points that can be directly sent to the actuators: on-off schedules for pumps and pressure set-points for pressures reducing valves. Finally, the results of applying the proposed control strategy to a portion of the Barcelona real WDN are provided., This work has been partially funded by the European Union through the project EFFINET (ref. FP7-ICT-2011-8-318556), by the Spanish Government and FEDER through the projects CICYT ECOCIS (ref. DPI2013-48243-C2-1-R), CICYT DEOCS (ref. DPI2016-76493-C3-3-R) and CICYT HARCRICS (ref. DPI2014-58104-R)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Periodic nonlinear economic model predictive control with changing horizon for water distribution networks

  • Wang, Ye
  • Salvador, José Ramón
  • Muñoz de la Peña, David
  • Puig, Vicenç
  • Cembrano, Gabriela
Trabajo presentado al 20th IFAC (International Federation of Automatic Control) World Congress, celebrado en Toulouse (Francia) del 9 al 14 de julio de 2017., A periodic nonlinear economic model predictive control (EMPC) with changing prediction horizon is proposed for the optimal management of water distribution networks (WDNs). The control model of the WDN is built by means of nonlinear differential-algebraic equations in which both the hydraulic pressure and flow variables are taken into account. The model allows the controller to consider minimum pressure constraints at the demands. A periodic terminal constraint is employed in order to guarantee closed-loop stability. The prediction horizon is modified on-line in order to guarantee convergence to the optimal periodic trajectory. The proposed control strategy is verified with the case study of the Richmond water network in a realistic hydraulic simulator. Although there are modeling errors between the control model and hydraulic model, the closed-loop system converges to a sub-optimal periodic trajectory satisfying all the constraints., This work has been partially funded by the Spanish Government and FEDER through the projects CICYT ECOCIS (ref. DPI2013-48243), CICYT DEOCS (ref. DPI2016-76493) and CICYT HARCRICS (ref. DPI2014-58104-R)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Distributed zonotopic set-membership state estimation based on optimization methods with partial projection

  • Wang, Ye
  • Alamo, Teodoro
  • Puig, Vicenç
  • Cembrano, Gabriela
Trabajo presentado al 20th IFAC (International Federation of Automatic Control) World Congress, celebrado en Toulouse (Francia) del 9 al 14 de julio de 2017., A distributed set-membership approach is proposed for the state estimation of large-scale systems. The uncertain system states are bounded in a sequence of the distributed set-membership estimators considering unknown-but-bounded system disturbances and measurement noise. In the framework of the set-membership approach, the measurement consistency test is implemented by finding parameterized intersection zonotopes. The size of the intersection zonotope is minimized by solving an optimization problem including a sequence of linear/bilinear matrix inequalities based on the weighted 2-norm criterion of the generator matrix. Meanwhile, for the distributed set-membership estimators, the partial projection method is considered to correct the estimation of the neighbor state. On the other hand, an on-line method is also provided. Finally, the proposed distributed set-membership approach is verified in a case study based on a urban drainage network., This work has been partially funded by the Spanish Government and FEDER through the projects CICYT ECOCIS (ref. DPI2013-48243), CICYT HARCRICS (ref. DPI2014-58104-R) and CICYT DEOCS (ref. DPI2016-76493)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Robust MPC for actuator-fault tolerance using set-based passive fault detection and active fault isolation

  • Xu, Feng
  • Puig, Vicenç
  • Ocampo-Martínez, Carlos
  • Olaru, Sorin
  • Niculescu, Silviu-Iulian
In this paper, a fault-tolerant control (FTC) scheme is proposed for actuator faults, which is built upon tube-based model predictive control (MPC) as well as set-based fault detection and isolation (FDI). In the class of MPC techniques, tubebased MPC can effectively deal with system constraints and uncertainties with relatively low computational complexity compared with other robust MPC techniques such as min-max MPC. Set-based FDI, generally considering the worst case of uncertainties, can robustly detect and isolate actuator faults. In the proposed FTC scheme, fault detection (FD) is passive by using invariant sets, while fault isolation (FI) is active by means of MPC and tubes. The active FI method proposed in this paper is implemented by making use of the constraint-handling ability of MPC to manipulate the bounds of inputs. After the system has been detected to become faulty, the input-constraint set of the MPC controller is adjusted to actively excite the system for achieving FI guarantees on-line, where an active FI-oriented input set is designed off-line. In this way, the system can be excited in order to obtain more extra system-operating information for FI than passive FI approaches. Overall, the objective of this paper is to propose an actuator MPC scheme with as little as possible of FI conservatism and computational complexity by combining tube-based MPC and set theory within the framework of MPC, respectively. Finally, a case study is used to show the effectiveness of the proposed FTC scheme., This work was supported by the DGR of Generalitat de Catalunya (SAC group ref. 2014/SGR/0375), the Spanish projects ECOCIS (ref. DPI2013-48243-C2-1-R) and HARCRICS (ref. DPI2014-58104-R), the China Scholarship Council (CSC), the Automatic Control Department of Supélec and CNRS-Supélec, France., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Generalized set-theoretic unknown input observer for LPV systems with application to state estimation and robust fault detection

  • Xu, Feng
  • Tan, Junbo
  • Wang, Xueqian
  • Puig, Vicenç
  • Liang, Bin
  • Yuan, Bo
  • Liu, Houde
This paper proposes to design an unknown input observer (UIO) for the linear-parameter-varying (LPV) system on the basis of the set theory, which is named as the set-theoretic UIO (SUIO). The advantage of the SUIO consists in that it combines active and passive approaches to obtain robustness in state estimation (SE) and fault detection (FD). The active approach is based on the use of UIO to decouple unknown inputs, while the passive approach is based on the set theory to bound uncertain factors that cannot be actively decoupled. As a result, the effect of both unknown inputs (process disturbances, modeling errors, etc.) and measurement noises can be appropriately handled in the residual signals compared with the standard UIO-based SE and FD approaches. The design of SUIO can overcome the limitations of the traditional UIO design conditions, which can significantly broaden the application of the UIO-based SE and FD theory. Moreover, this paper proposes a generalized framework that can provide more flexibility in the design of SUIO guaranteeing their stability by means of a group of matrix inequalities. Because the LPV system uses a collection of online obtainable scheduling variables to embed nonlinearities, the design of SUIO for the LPV system can be used to address the SE and FD problems of nonlinear systems. At the end of this paper, two case studies are used to illustrate the effectiveness of the proposed approach., This work was supported by the Natural Science Foundation of Guangdong (no. 2015A030313881), the National Natural Science Foundation of China (no. 61673239), the Shenzhen Key Lab of Space Robotic Technology and Telescience, the Spanish Government (MINECO) through the project CICYT ECOCIS (ref. DPI2013-48243-C2-1-R), and MINECO and FEDER through the project CICYT HARCRICS (ref. DPI2014-58104-R)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A distributed predictive control approach for periodic flow-based networks: application to drinking water systems

  • Grosso, J. M.
  • Ocampo-Martínez, Carlos
  • Puig, Vicenç
This paper proposes a distributed model predictive control approach designed to work in a cooperative manner for controlling flow-based networks showing periodic behaviours. Under this distributed approach, local controllers cooperate in order to enhance the performance of the whole flow network avoiding the use of a coordination layer. Alternatively, controllers use both the monolithic model of the network and the given global cost function to optimise the control inputs of the local controllers but taking into account the effect of their decisions over the remainder subsystems conforming the entire network. In this sense, a global (all-to-all) communication strategy is considered. Although the Pareto optimality cannot be reached due to the existence of non-sparse coupling constraints, the asymptotic convergence to a Nash equilibrium is guaranteed. The resultant strategy is tested and its effectiveness is shown when applied to a large-scale complex flow-based network: the Barcelona drinking water supply system., This work has been partially funded by the Spanish Ministry of Science and Technology through the projects DEOCS (Ref. DPI2016-76493-C3-3-R) and HARCRICS (Ref. DPI2014-58104-R)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Advanced monitoring of an industrial process integrating several sources of information through a data warehouse

  • Blesa, Joaquim
  • Puig, Vicenç
  • Sanz, Elma
  • Matey, J. L.
Trabajo presentado a la 4th International Conference on Control, Decision and Information Technologies (CoDIT), celebrada en Barcelona (España) del 5 al 7 de abril de 2017., This paper presents a methodology and architecture for the advanced monitoring of an industrial process integrating several sources of information using a data warehouse (DW) that include as metadata datamart to cross technical ubications and equipments with the information given by the existing monitoring systems and the time dimension. The advanced monitoring includes functionalities that allow to diagnose faulty components and to prognose faulty situations when a problem occurs in the production process. A real car painting process is used for illustration purposes., This work has been partially funded by the Spanish Government (MINECO) through the project CICYT ECOCIS (ref.DPI2013-48243- C2-1-R), by MINECO and FEDER through the project CICYT HARCRICS (ref.DPI2014-58104-R)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Fault detection and isolation in flat navigation canals

  • Segovia Castillo, Pablo
  • Rajaoarisoa, Lala
  • Duviella, Eric
  • Blesa, Joaquim
  • Nejjari, Fatiha
  • Puig, Vicenç
  • Horváth, Klaudia
Trabajo presentado a la 4th International Conference on Control, Decision and Information Technologies (CoDIT), celebrada en Barcelona (España) del 5 al 7 de abril de 2017., Inland navigation networks are composed of several artificial canals that are characterized by no slope. These canals are particularly subject to resonance phenomena, which can create waves such that the navigation condition might not be guaranteed. It is therefore required to ensure dealing with freefault measured data and actuators. In this work, a fault detection and isolation method based on the Integrator Delay Zero model (IDZ) is designed for flat navigation canals. The proposed method is dedicated to the detection and isolation of sensor and actuator faults. Finally, it is tested by considering the Cuinchy-Fontinettes canal located in the north of France., This work has been partially funded by the Spanish Ministry of Economy and Competitiveness (MINECOP) and FEDER through the project HARCRICS (ref. DPI2014-58104-R) and through the grant IJCI-2014-2081., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Comparative assessment of LPV-based predictive control strategies for a pasteurization plant

  • Karimi Pour, Fatemeh
  • Puig, Vicenç
  • Ocampo-Martínez, Carlos
Trabajo presentado a la 4th International Conference on Control, Decision and Information Technologies (CoDIT), celebrada en Barcelona (España) del 5 al 7 de abril de 2017., This paper presents a comparative study of three different approaches to design Model Predictive Control (MPC) strategies for a pasteurization plant using Linear Parameter Varying (LPV) models. The first two methods consider the LPV model in the design of the MPC controller in two different manners. The last approach uses a Robust MPC controller for taking parameter variations of the LPV model into account. It is assumed that the disturbances are unknown but bounded and the zonotopic set representation is used for modeling the uncertainty. In addition, a comprehensive comparison of the closed-loop performance accounting the proposed approaches is carried out through a high-fidelity simulator of a utility-scale pasteurization plant., This work has been partially funded by the Spanish Government (MINECO) through the projects ECOCIS (ref. DPI2013- 48243-C2-1-R), and HARCRICS (ref. DPI2014-58104-R FEDER)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Economic model predictive control for energy dispatch of a smart microgrid system

  • Nassourou, M.
  • Puig, Vicenç
  • Ocampo-Martínez, Carlos
Trabajo presentado a la 4th International Conference on Control, Decision and Information Technologies (CoDIT), celebrada en Barcelona (España) del 5 al 7 de abril de 2017., The problem of energy dispatch in heterogeneous complex systems such as smart grids cannot be efficiently solved using classical control or ad-hoc methods. This paper proposes the application of Economic Model Predictive Control (EMPC) for the management of a smart micro-grid system connected to an electrical power grid. The system comprises several subsystems, namely some photovoltaic (PV) panels, a wind generator, a hydroelectric generator, a diesel generator, and some storage devices (batteries). The batteries are charged with the energy from the PV panels, wind and hydroelectric generators, and they are discharged whenever the generators produce less energy than needed. The subsystems are interconnected via a DC Bus, from which load demands are satisfied. Assuming the load demand and the energy prices to be known, this study shows that EMPC is economically superior to other Model Predictive Control (MPC) based strategies (a standard tracking MPC, and their cascaded version in form of hierarchical two-layer approach)., This work was supported by Spanish Government (MINISTERIO ECNONOMIA Y COMPETITIVIDAD) and FEDER under project DPI2014-58104-R (HARCRICS)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Non-linear economic model predictive control of water distribution networks

  • Wang, Ye
  • Puig, Vicenç
  • Cembrano, Gabriela
This paper addresses a non-linear economic model predictive control (EMPC) strategy for water distribution networks (WDNs). A WDN could be considered as a non-linear system described by differential-algebraic equations (DAEs) when flow and hydraulic head equations are considered. As in other process industries, the main operational goal of WDNs is the minimisation of the economic costs associated to pumping and water treatment, while guaranteeing water supply with required flows and pressures at all the control/demand nodes in the network. Other operational goals related to safety and reliability are usually sought. From a control point of view, EMPC is a suitable control strategy for WDNs since the optimal operation of the network cannot be established a priori by fixing reference volumes in the tanks. Alternatively, the EMPC strategy should determine the optimal filling/emptying sequence of the tanks taking into account that electricity price varies between day and night and that the demand also follows a 24-hour repetitive pattern. On the other hand, as a result of the ON/OFF operation of parallel pumps in pumping stations, a two-layer control scheme has been used: a non-linear EMPC strategy with hourly control interval is chosen in the upper layer and a pump scheduling approach with one-minute sampling time in the lower layer. Finally, closed-loop simulation results of applying the proposed control strategy to the D-Town water network are shown., This work has been partially supported by the European Commission through the EFFINET project (ref. FP7-ICT-2012-318556), by the MEICOMP through the project CICYT ECOCIS (ref. DPI2013-48243-C2-1-R) and by MEICOMP and FEDER through the project CICYT HARCRICS (ref. DPI2014-58104-R)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Leak localization in water distribution networks using Bayesian classifiers

  • Soldevila, Adrià
  • Fernández Cantí, Rosa M.
  • Blesa, Joaquim
  • Tornil-Sin, Sebastian
  • Puig, Vicenç
This paper presents a method for leak localization in water distribution networks (WDNs) based on Bayesian classifiers. Probability density functions for pressure residuals are calibrated off-line for all the possible leak scenarios by using a hydraulic simulator, and considering the leak size uncertainty, demand uncertainty and sensor noise. A Bayesian classifier is applied on-line to the computed residuals to determine the location of leaks in the WDN. A time horizon based reasoning combined with the Bayesian classifier is also proposed to improve the localization accuracy. Two case studies based on the Hanoi and the Nova Icària networks are used to illustrate the performance of the proposed approach. Simulation results are presented for the Hanoi case study, whereas results for a real leak scenario are shown for the Nova Icària case study., This work has been funded by the Ministerio de Economía, Industria y Competitividad (MEINCOP) of the Spanish Government and FEDER through the projects ECOCIS (ref. DPI2013-48243-C2-1-R) and HARCRICS (ref. DPI2014-58104-R) and through the grant IJCI-2014-20801, by the European Commission through contract EFFINET (ref. FP7-ICT2011-8-318556) and by the Catalan Agency for Management of University and Research Grants (AGAUR), the European Social Fund (ESF) and the Secretary of University and Research of the Department of Companies and Knowledge of the Government of Catalonia through the grant FI-DGR 2015 (ref. 2015 FI_B 00591)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fault estimation of wind turbines using combined adaptive and parameter estimation schemes

  • Witczak, Marcin
  • Rotondo, Damiano
  • Puig, Vicenç
  • Puig, Vicenç
  • Nejjari, Fatiha
  • Pazera, Marcin
This paper addresses the problem of fault estimation in wind turbines using a joint fault and state estimation scheme. The scheme assumes a set of possible faults affecting the dynamics of the wind turbine. Then, a combined adaptive and parameter estimation scheme is developed taking into consideration that process disturbances and sensor noises are unknown but bounded in an ellipsoid. Two subcases are considered depending on the satisfaction of a certain rank condition. The proposed approach is applied to a wind turbine based on a benchmark system model. The benchmark represents relevant fault scenarios, including sensor, actuator, and process faults. The proposed approach focuses on the last group of faults. Finally, the obtained results show that a satisfactory fault estimation is achieved against a set of predefined fault scenarios., This work has been funded by the National Science Centre in Poland under grant 2013/11/B/ST7/01110, by the Spanish Ministry of Science and Technology through the project Health-Aware and Resilient Control of Critical Infrastructures and Complex Systems of the Comisión Interministerial de Ciencia y Tecnología (Reference: DPI2014-58104-R), by L′Agència de Gestió d′Ajuts Universitaris i de Recerca through contract FI-DGR 2015 (Reference: 2015FI_B2 00171), by the Direcció General de Recerca of Generalitat de Catalunya (SAC group Reference 2014/SGR/374), and by the Research Council of Norway through the Centers of Excellence funding scheme (project number 223254 - Centre for Autonomous Marine Operations and Systems, Norwegian University of Science and Technology). Damiano Rotondo also acknowledges that part of this work was carried out during the tenure of an ERCIM Alain Bensoussan Fellowship programme., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Set-membership approach and Kalman observer based on zonotopes for discrete-time descriptor systems

  • Wang, Ye
  • Puig, Vicenç
  • Cembrano, Gabriela
This paper proposes a set-membership state estimator and a zonotopic Kalman observer for discrete-time descriptor systems. Both approaches are developed in a set-based context considering system disturbances, measurement noise, and unknown inputs. This set-membership state estimation approach determines the set of consistent states with the model and measurements by constructing a parameterized intersection zonotope. Two methods to minimize the size of this intersection zonotope are provided: one inspired by Kalman filtering and the other based on solving an optimization problem involving a series of linear matrix inequalities. Additionally, we propose a zonotopic Kalman observer for discrete-time descriptor systems. Moreover, the relationship between both approaches is discussed. In particular, it is proved that the zonotopic Kalman observer in the current estimation type is equivalent to the set-membership approach. Finally, a numerical example is used to illustrate and compare the effectiveness of the proposed approaches., This work was partially supported by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects ECOCIS (ref. DPI2013-48243-C2-1-R), DEOCS (ref. DPI2016-76493-C3-3-R) and HARCRICS (ref. DPI2014-58104-R), and the FPI grant (ref. BES-2014-068319)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Periodic economic model predictive control with nonlinear-constraint relaxation for water distribution networks

  • Wang, Ye
  • Alamo, Teodoro
  • Puig, Vicenç
  • Cembrano, Gabriela
Trabajo presentado a la IEEE Conference on Control Applications (CCA), celebrada en Buenos Aires (Argentina) del 19 al 22 de septiembre de 2016., In this paper, a periodic economic model predictive control (EMPC) strategy with nonlinear algebraic constraint relaxations for water distribution networks (WDNs) is presented. A WDN is usually modeled by a series of differential-algebraic equations. When the hydraulic pressure/head and flow relations in the interconnected pipes are considered, the nonlinear algebraic equations will appear in the control-oriented model of WDNs. Specifically, two types of nonlinear algebraic equations are studied in terms of unidirectional and bidirectional flows in pipes. These nonlinear algebraic constraints are iteratively relaxed by a series of linear constraints. Therefore, the proposed EMPC strategy can be implemented by solving an optimization problem using the linear programming technique. Finally, the EMPC strategy with nonlinear algebraic constraint relaxations is verified in the Richmond water network. The comparison results of applying nonlinear EMPC strategy are also provided. The proposed nonlinear-constraint relaxation technique turns out to be much faster than the one obtained by a standard nonlinear optimization solver., This work has been funded by the Spanish projects ECOCIS (DPI-2013-48243-C2-1-R) and HARCRICS (DPI2014-58104-R)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Guaranteed state estimation and fault detection based on zonotopes for differential-algebraic-equation systems

  • Wang, Ye
  • Puig, Vicenç
  • Cembrano, Gabriela
  • Alamo, Teodoro
Trabajo presentado a la 3rd Conference on Control and Fault Tolerant Systems, celebrada en Barcelona (España) del 7 al 9 de septiembre de 2016., This paper presents a set-membership approach based on zonotopes for differential-algebraic-equation (DAE) systems with unknown-but-bounded disturbances and noise, which can be subsequently used for guaranteed state estimation and fault detection. Complex systems are usually modeled by differential and algebraic equations, where differential equations describe system dynamics and additionally, algebraic equations represent the static relations. The proposed algorithm provides a way to propagate a zonotopic set that contains the system states not only consistent with the measurement outputs but also constrained with their static relations. Finally, a real application has been presented to verify the proposed approach., This work has been partially funded by the Spanish Government (MINECO) through the project CICYT ECOCIS (ref. DPI2013-48243-C2-1-R), by MINECO and FEDER through the project CICYT HARCRICS (ref. DPI2014-58104-R)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Fault-tolerant periodic economic model predictive control of differential-algebraic-equation systems

  • Wang, Ye
  • Puig, Vicenç
  • Cembrano, Gabriela
Trabajo presentado a la 3rd Conference on Control and Fault Tolerant Systems, celebrada en Barcelona (España) del 7 al 9 de septiembre de 2016., This paper addresses a fault-tolerant periodic economic model predictive control (MPC) strategy for differential-algebraic-equation (DAE) systems. Fault tolerance evaluation of the proposed economic MPC strategy uses set computations and a performance degradation analysis. By means of the set computations, the feasible solution set (including system states and control inputs) can be determined as well as the admissible performance set can be obtained when system reconfiguration or fault accommodation strategies are used. The proposed control strategy allows to carry out an analysis of performance degradation by using the feasible and admissible performance set. As a result, if the performance degradation is accepted, the economic MPC controller can be applied using system reconfiguration or fault accommodation. Finally, the proposed fault-tolerant MPC strategy is verified through an illustrative example., This work has been partially funded by the Spanish Government (MINECO) through the project CICYT ECOCIS (ref. DPI2013-48243-C2-1-R), by MINECO and FEDER through the project CICYT HARCRICS (ref. DPI2014-58104-R)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Zonotopic extended Kalman filter and fault detection of discrete-time nonlinear systems applied to a quadrotor helicopter

  • Wang, Ye
  • Puig, Vicenç
Trabajo presentado a la 3rd Conference on Control and Fault Tolerant Systems, celebrada en Barcelona (España) del 7 al 9 de septiembre de 2016., This paper presents the extension of the zonotopic Kalman filter of linear systems to nonlinear systems subject to unknown-but-bounded system disturbances and Gaussian white noises known as zonotopic extended Kalman filter (ZEKF). Due to the computational simplicity of zonotopes, the uncertain system states are bounded into a zonotopic set. The system consistency test with the system measurements is completed without using the intersection between two sets but following the extended Kalman filtering procedure that requires to find the optimal observer gain. A fault detection method based on the ZEKF algorithm is also introduced. Finally, the proposed ZEKF algorithm is applied to the quadrotor helicopter under an on-line closed-loop simulation scheme and the simulation results illustrate the effectiveness of the proposed algorithm and fault detection method., This work has been partially funded by the Spanish Government (MINECO) through the project CICYT ECOCIS (ref. DPI2013-48243-C2-1-R), by MINECO and FEDER through the project CICYT HARCRICS (ref. DPI2014-58104-R)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Characterization of the minimum detectable fault of interval observers by using set-invariance theory

  • Pourasghar, Masoud
  • Puig, Vicenç
  • Ocampo-Martínez, Carlos
Trabajo presentado a la 3rd Conference on Control and Fault Tolerant Systems, celebrada en Barcelona (España) del 7 al 9 de septiembre de 2016., This paper addresses the characterization of the minimum detectable fault when using interval observers. The interval observers consider both input and uncertainty as unknown but bounded. The minimum detectable fault is characterized by means of residual sensitivity and invariant sets for interval observers. The design of such observers is performed by using zonotopic-set representations. The mathematical expression of the minimum magnitude of the fault that can be detected is derived for a given type of faults in separate formulations. Finally, a simulation example is employed to illustrate and discuss the effectiveness of the obtained results., This work has been partially funded by the Spanish Ministry of Science and Technology through the Project ECOCIS (Ref. DPI2013-48243-C2-1-R) and Project HARCRICS (Ref. DPI2014-58104-R)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Leak localization in water distribution networks using model-based Bayesian reasoning

  • Soldevila, Adrià
  • Fernández Cantí, Rosa M.
  • Blesa, Joaquim
  • Tornil-Sin, Sebastian
  • Puig, Vicenç
Trabajo presentado a la 15th European Control Conference (ECC) celebrada en Aalborg (Dinamarca) del 29 de junio al 1 de julio de 2016., This paper presents a new method for leak localization in Water Distribution Networks that uses a model-based approach combined with Bayesian reasoning. Probability density functions in model-based pressure residuals are calibrated off-line for all the possible leak scenarios by using a hydraulic simulator, being leak size uncertainty, demand uncertainty and sensor noise considered. A Bayesian reasoning is applied online to the available residuals to determine the location of leaks present in the Water Distribution Network. A time horizon method combined with the Bayesian reasoning is also proposed to improve the accuracy of the leak localization method. The Hanoi District Metered Area case study is used to illustrate the performance of the proposed approach., This work has been partially funded by Spanish Government (Ministerio de Economia y Competitividad) and FEDER through the Project ECOCIS (Ref. DPI2013-48243-C2-1-R) and Project HARCRICS (Ref. DPI2014-58104-R), and by EFFINET grant FP7-ICT-2012-318556 of the European Commission., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Nonlinear model predictive control with constraint satisfactions for a quadcopter

  • Wang, Ye
  • Ramirez-Jaime, A.
  • Xu, Feng
  • Puig, Vicenç
Trabajo presentado a la 13th European Workshop on Advanced Control and Diagnosis (ACD 2016)., This paper presents a nonlinear model predictive control (NMPC) strategy combined with constraint satisfactions for a quadcopter. The full dynamics of the quadcopter describing the attitude and position are nonlinear, which are quite sensitive to changes of inputs and disturbances. By means of constraint satisfactions, partial nonlinearities and modeling errors of the control-oriented model of full dynamics can be transformed into the inequality constraints. Subsequently, the quadcopter can be controlled by an NMPC controller with the updated constraints generated by constraint satisfactions. Finally, the simulation results applied to a quadcopter simulator are provided to show the eectiveness of the proposed strategy., This work has been partially funded by the Spanish Government (MINECO) through the project CICYT ECOCIS (ref. DPI2013-48243-C2-1-R), by MINECO and FEDER through the project CICYT HARCRICS (ref. DPI2014-58104-R), by the Natural Science Foundation of Guangdong (No.2015A030313881), by the National Natural Science Foundation of China (No.61673239) and the Shenzhen Key Lab of Space Robotic Technology and Telescience., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Robust optimization based energy dispatch in smart grids considering demand uncertainty

  • Nassourou, M.
  • Puig, Vicenç
  • Blesa, Joaquim
Trabajo presentado a la 13th European Workshop on Advanced Control and Diagnosis (ACD 2016)., In this study we discuss the application of robust optimization to the problem of economic energy dispatch in smart grids. Robust optimization based MPC strategies for tackling uncertain load demands are developed. Unexpected additive disturbances are modelled by defining an affine dependence between the control inputs and the uncertain load demands. The developed strategies were applied to a hybrid power system connected to an electrical power grid. Furthermore, to demonstrate the superiority of the standard Economic MPC over the MPC tracking, a comparison (e.g average daily cost) between the standard MPC tracking, the standard Economic MPC, and the integration of both in one-layer and two-layer approaches was carried out. The goal of this research is to design a controller based on Economic MPC strategies, that tackles uncertainties, in order to minimise economic costs and guarantee service reliability of the system., This work was supported by Spanish Government (MINISTERIO ECNONOMIA Y COMPETITIVIDAD) and FEDER under project DPI2014-58104-R (HARCRICS)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Leak localization in water distribution networks using pressure models and classifiers

  • Soldevila, Adrià
  • Tornil-Sin, Sebastian
  • Blesa, Joaquim
  • Fernández Cantí, Rosa M.
  • Puig, Vicenç
This chapter proposes an architecture and an associate methodology for leak localization in Water Distribution Networks (WDN) that are based on pressure models and classifiers. In a first stage of the proposed architecture, residuals are obtained by comparing available pressure measurements with the estimations provided by a WDN model. In a second stage, a classifier is applied to the residuals with the aim of determining the leak location. The classifier is trained with data generated by simulation of the WDN under different leak scenarios and uncertainty conditions. Several classification approaches are considered and compared. The proposed methodology is tested both using synthetic and experimental data with real WDNs of different sizes. The comparison with the current approaches shows a performance improvement., This work has been funded by the Spanish Ministry of Economy and Competitiveness (MINECO) and FEDER through the projects ECOCIS (ref. DPI2013-48243-C2-1-R) and HARCRICS (ref. DPI2014-58104-R) and through the grant IJCI-2014-2081,by the European Commission through contract EFFINET (ref. FP7-ICT2011- 8-318556) and by the Catalan Agency for Management of University and Research Grants (AGAUR) through the grants FI-DGR 2015 (ref. 2015 FI_B 00591) and 2014PDJ00102., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multi-model prediction for demand forecast in water distribution networks

  • López Farías, Rodrigo
  • Rodríguez-Rangel, Héctor
  • Puig, Vicenç
  • Flores, Juan J.
This paper presents a multi-model predictor called Qualitative Multi-Model Predictor Plus (QMMP+) for demand forecast in water distribution networks. QMMP+ is based on the decomposition of the quantitative and qualitative information of the time-series. The quantitative component (i.e., the daily consumption prediction) is forecasted and the pattern mode estimated using a Nearest Neighbor (NN) classifier and a Calendar. The patterns are updated via a simple Moving Average scheme. The NN classifier and the Calendar are executed simultaneously every period and the most suited model for prediction is selected using a probabilistic approach. The proposed solution for water demand forecast is compared against Radial Basis Function Artificial Neural Networks (RBF-ANN), the statistical Autoregressive Integrated Moving Average (ARIMA), and Double Seasonal Holt-Winters (DSHW) approaches, providing the best results when applied to real demand of the Barcelona Water Distribution Network. QMMP+ has demonstrated that the special modelling treatment of water consumption patterns improves the forecasting accuracy, This work has been partially funded by the Spanish Ministry of Economy and Competitiveness (MINECO) and the European Union through FEDER program through the projects DEOCS (ref. DPI2016-76493-C3-3-R) and HARCRICS (ref. DPI2014-58104-R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A shifting pole placement approach for the design of performance-varying multivariable PID controllers via BMIs

  • Sánchez, Helem Sabina
  • Rotondo, Damiano
  • Puig, Vicenç
  • Quevedo, Joseba
In this paper, the design of a performance-varying multivariable Proportional-Integral-Derivative (PID) controllers is presented. The main objective is to provide a framework for changing online the closed-loop behavior of the controlled system using the shifting pole placement approach. In order to carry out this target, the PID design problem is transformed into a static output feedback design problem which is analyzed through the linear parameter-varying (LPV) paradigm. An academic example is used to demonstrate the effectiveness of the proposed approach., This work has been partly funded by MINECO and FEDER through the project CICYT HARCRICS (ref.DPI2014-58104-R) and SCAV (ref.DPI2017-88403-R). This work has been also supported by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656) and the grant Juan de la Cierva-Formación (FJCI-2016-2901)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multi-layer health-aware economic predictive control of a pasteurization pilot plant

  • Karimi Pour, Fatemeh
  • Puig, Vicenç
  • Ocampo-Martínez, Carlos
This paper proposes two different health-aware economic predictive control strategies that aim at minimizing the damage of components in a pasteurization plant. The damage is assessed with a rainflow-counting algorithm that allows estimating the components’ fatigue. By using the results obtained from this algorithm, a simplified model that characterizes the health of the system is developed and integrated into the predictive controller. The overall control objective is modified by adding an extra criterion that takes into account the accumulated damage. The first strategy is a single-layer predictive controller with an integral action to eliminate the steady-state error that appears when adding the extra criterion. In order to achieve the best minimal accumulated damage and operational costs, the single-layer approach is improved with a multi-layer control scheme, where the solution of the dynamic optimization problem is obtained from the model in two different time scales. Finally, to achieve the advisable trade-off between minimal accumulated damage and operational costs, both control strategies are compared in simulation over a utility-scale pasteurization plant., This work has been partially funded by the Spanish Government (MINECO) through the project DEOCS (DPI2016-76493-C3-3-R), and by MINECO and FEDER through the project HARCRICS (DPI2014-58104-R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

State estimation and decoupling of unknown inputs in uncertain LPV systems using interval observers

  • Rotondo, Damiano
  • Cristofaro, Andrea
  • Arne Johansen, Tor
  • Nejjari, Fatiha
  • Puig, Vicenç
This paper proposes a linear parameter varying (LPV) interval observer for state estimation and unknown inputs decoupling in uncertain continuous-time LPV systems. Two different problems are considered and solved: (1) the evaluation of the set of admissible values for the state at each instant of time; and (2) the unknown input observation, i.e. the design of the observer in such a way that some information about the nature of the unknown inputs affecting the system can be obtained. In both cases, analysis and design conditions, which rely on solving linear matrix inequalities (LMIs), are provided. The effectiveness and appeal of the proposed method is demonstrated using an illustrative application to a two-joint planar robotic manipulator., This work has been supported by a grant from Iceland, Liecht- enstein and Norway through the EEA Financial Mechanism. Operated by Universidad Complutense de Madrid (ref. 006- ABEL-IM-2014B). The authors also acknowledge the support by MINECO and FEDER through the project CICYT HAR- CRICS (ref. DPI2014-58104-R), by AGAUR through the con- tracts FI-DGR 2014 (ref. 2014FI_B1_00172) and FI-DGR 2015 (ref. 2015FI_B2_00171), by the DGR of the Generalitat de Catalunya (ref. 2014/SGR/374) and by the Research Council of Norway through the Centres of Excellence funding scheme (ref. 223254 - AMOS). D. Rotondo is also supported by the ERCIM Alain Bensoussan Fellowship programme., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fault detection and isolation using viability theory and interval observers

  • Zarch, Majid Ghaniee
  • Puig, Vicenç
  • Poshtan, Javad
  • Shoorehdeli, Mahdi Aliyari
This paper proposes the use of interval observers and viability theory in fault detection and isolation (FDI). Viability theory develops mathematical and algorithmic methods for investigating the viability constraints characterisation of dynamic evolutions of complex systems under uncertainty. These methods can be used for checking the consistency between observed and predicted behaviour by using simple sets that approximate the exact set of possible behaviour (in the parameter or state space). In this paper, FDI is based on checking for an inconsistency between the measured and predicted behaviours using viability theory concepts and sets. Finally, an example is provided in order to show the usefulness of the proposed approach., This work was partially supported by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects ECOCIS (ref. DPI2013-48243- C2-1-R), DEOCS (ref. DPI2016-76493-C3-3-R) and HAR- CRICS (ref. DPI2014-58104-R)., Postprint, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modeling and fault diagnosis of flat inland navigation canals

  • Segovia Castillo, Pablo
  • Blesa, Joaquim
  • Horváth, Klaudia
  • Rajaoarisoa, Lala
  • Nejjari, Fatiha
  • Puig, Vicenç
  • Duviella, Eric
This article regards the development of an analytical redundancy-based approach for detecting and isolating both sensor and actuator faults in flat inland navigation canals. Inland navigation networks are principally used for transport and are composed of many canalized natural rivers and artificial canals characterized by no slope. These canals are strongly affected by resonance phenomena, which can create waves such that the navigation condition might not be guaranteed. It is, therefore, required to ensure dealing with fault-free measured data and actuators. The proposed approach is based on the integrator delay zero model of the flat inland navigation canal. The proposed method is tested by considering the Cuinchy–Fontinettes navigation reach (in the north of France) to detect and isolate the occurrence of faults in the Cuinchy and Fontinettes level sensors and in the Cuinchy gate., This work has been partially funded by the Spanish Ministry of Economy and Competitiveness (MINECOP) and FEDER through the project HARCRICS (ref. DPI2014-58104- R) and through the grant IJCI-2014-20801., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Robust zonotopic observer design: Interval observer versus set-membership approaches

  • Pourasghar, Masoud
  • Puig, Vicenç
  • Ocampo-Martínez, Carlos
Trabajo presentado en la 4th Conference on Control and Fault Tolerant Systems (SysTol), celebrada en Casablanca (Marruecos), del 18 al 20 de septiembre de 2019, The aim of this paper is to provide a robust observer design using a Linear Matrix Inequality (LMI) technique along with the analysis and comparison of the interval observer and set-membership approaches within the state estimation framework. The propagation of the uncertainty is taken into account considering a zonotopic-set representation. Both approaches are compared and related using Linear Quadratic Regulator (LQR). Finally, a simulation example based on a three-tank system is employed to both illustrate and discuss the effectiveness of the proposed approach., This work has been partially funded by the Spanish Government (MINECO) through the project DEOCS (ref. DPI2016-76493-C3-3-R), by MINECO and FEDER through the project HARCRICS (ref. DPI2014-58104-R) and by Agencia de Gestio d’Ajuts Universitaris i de Recerca.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Interval observer-based fault detectability analysis using mixed set-invariance theory and sensitivity analysis approach

  • Pourasghar, Masoud
  • Puig, Vicenç
  • Ocampo-Martínez, Carlos
This paper addresses the characterisation of the minimum detectable fault (MDF) by means of residual sensitivity integrated with the set-invariance theory when using an interval observer-based approach as a fault detection (FD) scheme. Uncertainties (disturbances and noise) are considered as of unknown but bounded nature (i.e. in the set-membership framework). A zonotopic-set representation towards reducing set operations to simple matrix calculations is utilised to bound the state/output estimations provided by the interval observer-based approach. In order to show the connection between sensitivity and set-invariance analyses, mathematical expressions of the MDF are derived when considering different types of faults. Finally, a simulation case study based on a quadruple-tank system is employed to both illustrate and discuss the effectiveness of the proposed approach. The interval observer-based FD scheme is used to test the MDF obtained from the integration of both residual sensitivity analysis and set-invariance theory in the considered case study., This work has been partially funded by the Spanish Government (MINECO) through the project DEOCS (ref. DPI2016-76493-C3-3-R), by MINECO and FEDER through the project HARCRICS (ref. DPI2014-58104-R) and by Ag`encia de Gesti´o d’Ajuts Universitaris i de Recerca.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optimal energy dispatch in a smart micro-grid system using economic model predictive control

  • Nassourou, M.
  • Blesa, Joaquim
  • Puig, Vicenç
The problem of energy dispatch in heterogeneous complex systems such as smart grids cannot be efficiently addressed using classical control or ad hoc methods. This article discusses the application of economic model predictive control to the management of a smart micro-grid system connected to an electrical power grid. The considered system is composed of several subsystems, namely, some photovoltaic panels, a wind generator, a hydroelectric generator, a diesel generator, and some storage devices (batteries). The batteries are charged with the energy from the photovoltaic panels, wind and hydroelectric generators, and they are discharged whenever the generators produce less energy than needed. The subsystems are interconnected via a DC Bus, from which load demands are satisfied. Modeling smart grids components is based on the generalized flow-based networked systems paradigm, and assuming energy generators to be stable, load demands and energy prices are known. This study shows that economic model predictive control is economically superior to a two-layer hierarchical model predictive control., This work has been partially funded by the Spanish Ministry of Economy and Competitiveness (MINECOP) and FEDER through the project HARCRICS (ref. DPI2014-58104- R) and through the grant IJCI-2014-20801 and by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656)
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Model calibration for leak localization, a real application

  • Sanz, Gerard
  • Meseguer Amela, Jordi
  • Pérez Magrané, Ramon|||0000-0002-9216-4234
The localization of leaks in Water Distribution Networks has a major relevance in terms of environmental and economic efficiency. This localization is generally carried on in situ by human operators using time consuming methods like acoustic loggers. Nevertheless, the automated aid provided to the operators is continuously increasing thanks to the exhaustive use of models. Models that have to be calibrated and updated in order to provide proper help and an improvement in the leak search. This paper presents an experience of leak localization using steady state models combined with a demand calibration algorithm. The calibration produces a notable improvement of the localization accuracy and signals changes in the network configuration. Results presented are based on real data and a real leak provoked for the test., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Fault tolerance evaluation of nonlinear systems using viability theory

  • Ghaniee Zarch, Majid
  • Poshtan, Javad
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
© 2016 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, This paper presents a computational procedure based on viability theory to evaluate the fault tolerance admissibility of a given fault configuration of a nonlinear system controlled by means of a predictive control law. The admissible solution set for the control problem, including the effect of faults, is determined using viability kernel and capture basin. Finally, water heater part of pasteurization process is provided as benchmark in order to show the usefulness of viability theory for fault tolerance evaluation.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Nonlinear model predictive control with constraint satisfactions for a quadcopter

  • Wang, Ye|||0000-0003-1395-1676
  • Ramírez Jaime, Andrés Felipe
  • Xu, Feng
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
This paper presents a nonlinear model predictive control (NMPC) strategy combined with constraint satisfactions for a quadcopter. The full dynamics of the quadcopter describing the attitude and position are nonlinear, which are quite sensitive to changes of inputs and disturbances. By means of constraint satisfactions, partial nonlinearities and modeling errors of the control-oriented model of full dynamics can be transformed into the inequality constraints. Subsequently, the quadcopter can be controlled by an NMPC controller with the updated constraints generated by constraint satisfactions. Finally, the simulation results applied to a quadcopter simulator are provided to show the e ectiveness of he proposed strategy.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Robust state estimation and fault detection combining unknown input observer and set-membership approach

  • Xu, Feng
  • Tan, Junbo
  • Wang, Xueqian
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
  • Liu, Houde
  • Liang, Bin
  • Yuan, Bo
© 2016 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, This paper aims to propose a new robust state-estimation and fault-detection method by combining the unknown input observer (UIO) and the set-membership estimator (SME). It is known that both the SUIO and the SME can be used to estimate the states of a system. The former aims to obtain a particular value by actively decoupling the effect of unknown inputs, while the latter can obtain state-estimation sets by prediction and correction based on the set theory. Instead of particular state values, the latter can obtain state-estimation sets guaranteeing to contain system states (i.e., robust state estimation). In this paper, we propose to use the framework of the UIO to actively decouple part of unknown inputs and then further employ the set-membership estimation method to estimate state sets and detect faults. The objective of the proposed method is to reduce the conservatism of robust state-estimation sets by using the UIO to remove the contribution of part of unknown inputs to the sizes of state-estimation sets. At the end of this paper, a numerical example is used to illustrate the effectiveness and advantages of the proposed approach.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Zonotopic fault estimation filter design for discrete-time descriptor systems

  • Wang, Ye|||0000-0003-1395-1676
  • Wang, Zhenhua
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
  • Cembrano Gennari, Gabriela|||0000-0003-1436-6022
This paper considers actuator-fault estimation for discrete-time descriptor systems with unknown but bounded system disturbance and measurement noise. A zonotopic fault estimation filter is designed based on the analysis of fault detectability indexes. To ensure estimation accuracy, the filter gain in the zonotopic fault estimation filter is optimized through the zonotope minimization. The designed zonotopic filter not only can estimate fault magnitudes, but it also provides fault estimation results in an interval, i.e. the upper and lower bounds of fault magnitudes. Moreover, the proposed fault estimation filter has a non-singular structure and hence is easy to implement. Finally, simulation results are provided to illustrate the effectiveness of the proposed method., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Implementación de un control Fuzzy en el lazo de control de velocidad de un helicóptero coaxial no tripulado

  • Rubí Perelló, Bartomeu|||0000-0002-8822-2681
El objetivo de este trabajo es el de estudiar el comportamiento de un controlador Fuzzy en el control de las velocidades lineales de un vehículo aéreo no tripulado, en el caso concreto de aplicación en un helicóptero coaxial en miniatura. Para ello, se parte de un sistema de control en cascada compuesto por un control de trayectoria, un control de velocidad y un control de actitud, y del cual ya se validado su funcionamiento de forma experimental. Este control, resultado de otro proyecto, muestra un correcto comportamiento respecto a sus especificaciones, pero demuestra una respuesta mejorable en el control de las velocidades. Por ello, en este artículo se muestran los resultados obtenidos al substituir este controlador, el cual anteriormente estaba implementado con un conjunto de controladores de tipo Proporcional-Derivativo, por un controlador inteligente de tipo Fuzzy. Los resultados muestran un comportamiento algo más rápido y más suave, por lo tanto se consigue mejorar el controlador de velocidad anterior., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Zonotopic extended Kalman filter and fault detection of discrete-time nonlinear systems applied to a quadrotor helicopter

  • Wang, Ye|||0000-0003-1395-1676
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
© 2016 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, This paper presents the extension of the zonotopic Kalman filter of linear systems to nonlinear systems subject to unknown-but-bounded system disturbances and Gaussian white noises known as zonotopic extended Kalman filter (ZEKF). Due to the computational simplicity of zonotopes, the uncertain system states are bounded into a zonotopic set. The system consistency test with the system measurements is completed without using the intersection between two sets but following the extended Kalman filtering procedure that requires to find the optimal observer gain. A fault detection method based on the ZEKF algorithm is also introduced. Finally, the proposed ZEKF algorithm is applied to the quadrotor helicopter under an on-line closed-loop simulation scheme and the simulation results illustrate the effectiveness of the proposed algorithm and fault detection method.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Stochastic model predictive control based on Gaussian processes applied to drinking water networks

  • Wang, Ye|||0000-0003-1395-1676
  • Ocampo-Martínez, Carlos|||0000-0001-9251-6044
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
This study focuses on developing a stochastic model predictive control (MPC) strategy based on Gaussian processes (GPs) for propagating system disturbances in a receding horizon way. Using a probabilistic system representation, the state trajectories considering the influence of disturbances can be obtained through the uncertainty propagation by using GPs. This fact allows obtaining the confidence intervals for state evolutions over the MPC prediction horizon that are included into the MPC objective function and constraints. The feasibility of the proposed MPC strategy considering the incorporated results of disturbance forecasting is also discussed. Simulation results obtained from the application of the proposed approach to the Barcelona drinking water network taking real demand data into account are presented. The comparison with the well-known certainty-equivalent MPC shows the effectiveness of the proposed stochastic MPC approach., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Nonlinear model predictive control for hydrogen production in an ethanol steam reformer with membrane separation

  • Pérez Contreras, Eloi
  • Serra, Maria|||0000-0002-9885-8093
  • Ocampo-Martínez, Carlos|||0000-0001-9251-6044
  • Llorca Piqué, Jordi|||0000-0002-7447-9582
© 2016 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, This paper presents a new Nonlinear Model Predictive Control (NMPC) design for an Ethanol Steam Reformer with Pd-Ag membrane separation stage. The reformer is used to produce pure hydrogen able to feed a Proton Exchange Membrane Fuel Cell. Mass and energy balances are used to obtain the nonlinear dynamic model of both the reforming and the separation stages. Constraints, system nonlinearities and flexible cost function are the main reasons to select an NMPC controller, which is tested against the ordinary differential equations as simulation model, and has an internal model based on the sample data technique.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Robust fault detection of singular LPV systems with multiple time-varying delays

  • Hassanabadi, Amir Hossein
  • Shafiee, Masoud
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
In this paper, the robust fault detection problem for LPV singular delayed systems in the presence of disturbances and actuator faults is considered. For both disturbance decoupling and actuator fault detection, an unknown input observer (UIO) is proposed. The aim is to compute a residual signal which has minimum sensitivity to disturbances while having maximum sensitivity to faults. Robustness to unknown inputs is formulated in the sense of the H-infinity-norm by means of the bounded real lemma (BRL) for LPV delayed systems. In order to formulate fault sensitivity conditions, a reference model which characterizes the ideal residual behavior in a faulty situation is considered. The residual error with respect to this reference model is computed. Then, the maximization of the residual fault effect is converted to minimization of its effect on the residual error and is addressed by using the BRL. The compromise between the unknown input effect and the fault effect on the residual is translated into a multi-objective optimization problem with some LMI constraints. In order to show the efficiency and applicability of the proposed method, a part of the Barcelona sewer system is considered.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Leak detection in a DMA, a real application of flow modelling

  • Jiménez, Víctor
  • Grau Torrent, Sergi|||0000-0003-1192-1430
  • Pérez Magrané, Ramon|||0000-0002-9216-4234
This paper presents a versatile methodology to calculate parameters that characterise the demand of a DMA. This parameters are used for the leak modelling so that a predictive model is built and trained with historical data and used to detect on-line new leaks so that the repair time can be reduced applying proper leak localisation techniques. This methodology has been programmed using R where the modelling packages available provide assortment of predictive models easily to implement. It has been integrated in a Data analysis tool in order to utilise the great amount of information coming continuously from the WDN. Once the methodology and the tool are described the results applied to a real DMA are presented. This work has been carried out by the fundació CTM Centre Tecnològic (CTM) collaborating with Research Center for Supervision, Safety and Automatic Control (CS2AC) within a research project of Aigües de Manresa., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Fault estimation of wind turbines using combined adaptive and parameter estimation schemes

  • Witczak, Marcin
  • Rotondo, Damiano|||0000-0002-8855-5582
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
  • Nejjari Akhi-Elarab, Fatiha|||0000-0001-9118-632X
  • Pazera, Marcin
"This is the peer reviewed version of the following article: Witczak M, Rotondo D, Puig V, Nejjari F, Pazera M. Fault estimation of wind turbines using combined adaptive and parameter estimation schemes. Int J Adapt Control Signal Process. 2017, which has been published in final form at 10.1002/acs.2792. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving.", This paper addresses the problem of fault estimation in wind turbines using a joint fault and state estimation scheme. The scheme assumes a set of possible faults affecting the dynamics of the wind turbine. Then, a combined adaptive and parameter estimation scheme is developed taking into consideration that process disturbances and sensor noises are unknown but bounded in an ellipsoid. Two subcases are considered depending on the satisfaction of a certain rank condition. The proposed approach is applied to a wind turbine based on a benchmark system model. The benchmark represents relevant fault scenarios, including sensor, actuator, and process faults. The proposed approach focuses on the last group of faults. Finally, the obtained results show that a satisfactory fault estimation is achieved against a set of predefined fault scenarios., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Robust unknown input observer for state and fault estimation in discrete-time Takagi-Sugeno systems

  • Rotondo, Damiano|||0000-0002-8855-5582
  • Witczak, Marcin
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
  • Nejjari Akhi-Elarab, Fatiha|||0000-0001-9118-632X
  • Pazera, Marcin
In this paper, a robust unknown input observer (UIO) for the joint state and fault estimation in discrete-time Takagi-Sugeno (TS) systems is presented. The proposed robust UIO, by applying the H-infinity framework, leads to a less restrictive design procedure with respect to recent results found in the literature. The resulting design procedure aims at achieving a prescribed attenuation level with respect to the exogenous disturbances, while obtaining at the same time the convergence of the observer with a desired bound on the decay rate. An extension to the case of unmeasurable premise variables is also provided. Since the design conditions reduce to a set of linear matrix inequalities that can be solved efficiently using the available software, an evident advantage of the proposed approach is its simplicity. The final part of the paper presents an academic example and a real application to a multi-tank system, which exhibit clearly the performance and effectiveness of the proposed strategy.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

A Fault hiding approach for the sliding mode fault-tolerant control of a non-holonomic mobile robot

  • Stancu, Alexandru
  • Codres, Eduard
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
© 2016 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, When mobile robots are intended to be used in hazardous environments or for long-time operations, it is needed to increase their robustness against faults. This could be achieved by means of the inclusion of Fault Tolerant Control (FTC) mechanisms. In this paper, a FTC based on fault hiding approach is proposed for a non-holonomic mobile robot. First, a Sliding Mode Controller (SMC) is designed to control the robost and to cope with modelling uncertainty. Later on, it is enhanced to take into account actuator faults leading to a fault hiding approach for the sliding mode fault-tolerant control of the robot. Results using simulated fault scenarios are presented to illustrate the performance of the proposed approach.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Fault-tolerant periodic economic model predictive control of differential-algebraic-equation systems

  • Wang, Ye|||0000-0003-1395-1676
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
  • Cembrano Gennari, Gabriela|||0000-0003-1436-6022
© 2016 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, This paper addresses a fault-tolerant periodic economic model predictive control (MPC) strategy for differential-algebraic-equation (DAE) systems. Fault tolerance evaluation of the proposed economic MPC strategy uses set computations and a performance degradation analysis. By means of the set computations, the feasible solution set (including system states and control inputs) can be determined as well as the admissible performance set can be obtained when system reconfiguration or fault accommodation strategies are used. The proposed control strategy allows to carry out an analysis of performance degradation by using the feasible and admissible performance set. As a result, if the performance degradation is accepted, the economic MPC controller can be applied using system reconfiguration or fault accommodation. Finally, the proposed fault-tolerant MPC strategy is verified through an illustrative example.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

A shifting pole placement approach for the design of performance-varying multivariable PID controllers via BMIs

  • Sánchez, Helem Sabina
  • Rotondo, Damiano|||0000-0002-8855-5582
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
  • Quevedo Casín, Joseba Jokin|||0000-0002-7827-2896
© <year>. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, In this paper, the design of a performance-varying multivariable Proportional-Integral-Derivative (PID) controllers is presented. The main objective is to provide a framework for changing online the closed-loop behavior of the controlled system using the shifting pole placement approach. In order to carry out this target, the PID design problem is transformed into a static output feedback design problem which is analyzed through the linear parameter-varying (LPV) paradigm. An academic example is used to demonstrate the effectiveness of the proposed approach., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Prognosis of quality sensors in the Barcelona drinking water network

  • García Valverde, Diego
  • Creus Rodriguez, Ramon
  • Minoves Ruiz, Meritxell
  • Pardo, Xavier
  • Quevedo Casín, Joseba Jokin|||0000-0002-7827-2896
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
One of the most important areas of the water utilities is the water quality management. This area is responsible of guaranteeing safety in the water supply to the citizens. The strategy to guarantee the safety is based on two principal elements: disinfection and monitoring. Disinfection techniques, such as chlorination, allow to prevent the growing of microorganisms present in the water. Moreover, in order to guarantee this safety in the whole water network and avoid any unexpected event, on-line sensors are required to monitor a set of quality parameters. The whole process is based on the assumption that the information retrieved from quality sensors is totally reliable. But due to the complexity of the calibration and maintenance of these chemical sensors, several factors affect the accuracy of the raw data collected. Consequently, any decision based on this raw data might be based on a non solid base. Therefore, this work presents a data analytics approach consisting in two modules: fault diagnosis and prognosis. The fault diagnosis module first discerns if a sensor is detecting a real change on water quality parameters or actually is providing inconsistent information due to some malfunction. The prognosis module aims to predict the fault instant due to a slow degradation, which is very common in chlorine sensors. This approach allows to apply a predictive maintenance strategy reducing corrective actions. The proposed methodology has been satisfactorily tested on the Barcelona Drinking Water Network., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Combined Holt-Winters and GA trained ANN approach for sensor validation and reconstruction: application to water demand flowmeters

  • Rodríguez Rangel, Héctor
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
  • Flores, Juan J.
  • López, Rodrigo
© 2016 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, This paper proposes a Double Seasonal Holt-Winters (DSHW) forecasting model with an auxiliary Artificial Neural Network (ANN) trained with a Genetic Algorithm (GA) to model the DSHW residuals. ANN complements and improves the DSHW prediction. The proposed model also includes an on-line validation and reconstruction mechanism useful to detect and correct missing and erroneous data. This mechanism also impacts improving the DSHW prediction accuracy and precision. The proposed model and validation mechanism are applied to predict the time series generated by two monitored flowmeters of two sectors of Barcelona's drinking water network (DWN). The accuracy and precision improvement of the proposed method with respect to standard DSHW and ARIMA approaches is provided.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Robust optimization based energy dispatch in smart grids considering simultaneously multiple uncertainties: load demands and energy prices

  • Nassourou, M
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
  • Blesa Izquierdo, Joaquim|||0000-0002-5626-3753
Solving the problem of energy dispatch in a heterogeneous complex system is not a trivial task. The problem becomes even more complex considering uncertainties in demands and energy prices. This paper discusses the development of several Economic Model Predictive Control (EMPC) based strategies for solving an energy dispatch problem in a smart micro-grid. The smart grid components are described using control-oriented model approach. Considering uncertainty of load demands and energy prices simultaneously, and using an economic objective function, leads to a non-linear non-convex problem. The technique of using an affine dependent controller is used to convexify the problem. The goal of this research is the development of a controller based on EMPC strategies that tackles both endogenous and exogenous uncertainties, in order to minimize economic costs and guarantee service reliability of the system. The developed strategies have been applied to a hybrid system comprising some photovoltaic (PV) panels, a wind generator, a hydroelectric generator, a diesel generator, and some storage devices interconnected via a DC Bus. Additionally, a comparison between the standard EMPC, and its combination with MPC tracking in single-layer and two-layer approaches was also carried out based on the daily cost of energy production., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Virtual actuator-based FTC for LPV systems with saturating actuators and FDI delays

  • Rotondo, Damiano|||0000-0002-8855-5582
  • Ponsart, J. C.
  • Nejjari Akhi-Elarab, Fatiha|||0000-0001-9118-632X
  • Theilliol, Didier
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
The main contribution of this paper consists in solving the problem of fault tolerant control (FTC) for linear parameter varying (LPV) systems subject to actuator saturation and fault detection and isolation (FDI) delays. The FTC is based on virtual actuators that reconfigure the faulty plant to maintain the stability and to avoid the saturation of the actuators. On the other hand, a design methodology that provides the nominal output-feedback controller, which maximizes the tolerated delay between the fault occurrence and its isolation, is developed. The design process consists in finding the optimal feasible solution to a finite set of linear matrix inequalities (LMIs). Finally, an example is used to illustrate the theoretical results., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Economic Model Predictive Control of Aeration Systems in a Full Scale Biological Wastewater Treatment Plant

  • Nejjari Akhi-Elarab, Fatiha|||0000-0001-9118-632X
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
  • Quevedo Casín, Joseba Jokin|||0000-0002-7827-2896
  • Pascual, Josep
  • de Campos Paus, Sergio
This work presents an economic model predictive control (EMPC) strategy for the control of the dissolved oxygen concentrations in the aerated reactors of a wastewater treatment plant located in Girona, Spain. The control strategy is investigated and evaluated based on the ASM1 simulation benchmark for performance assessment. In addition, the effect of the EMPC controller parameters such as the predictive horizon, the control horizon, the weights of input and the sample time are also investigated and studied. The obtained results applying the EMPC strategy for the control of the aeration system in the wastewater treatment plant show its effectiveness., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Model- vs. data-based approaches applied to fault diagnosis in potable water supply networks

  • Cugueró Escofet, Miquel Àngel|||0000-0001-9525-1790
  • Quevedo Casín, Joseba Jokin|||0000-0002-7827-2896
  • Alippi, Cesare
  • Roveri, Manuel
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
  • García Valverde, Diego
  • Trovò, F
In this paper, the problem of fault diagnosis in drinking water transport networks (DWTNs) is addressed. Two different fault diagnosis approaches are proposed to deal with this problem. The first one is based on a model-based approach exploiting a-priori information regarding physical/temporal relations existing between the measured variables in the monitored system, providing fault detection and isolation capabilities by means of the residuals generated using these measured variables and their estimations. This a-priori information is provided by the topology and the physical relations between the elements constituting the system, which is used by design in order to derive fault diagnosis. Differently, the second approach does not require the physical a-priori information of the network to operate. It relies on a data-driven solution meant to exploit the spatial and temporal relationships present in the acquired data streams to detect and isolate faults. Relationships between data streams are modelled through sequences of linear dynamic time-invariant models whose estimated coefficients are used to feed a Hidden Markov Model (HMM). When the pattern of estimated coefficients cannot be explained by the trained HMM, a change is detected. Afterwards, a cognitive method based on a functional graph representation of the system isolates the fault. Finally, a performance comparison between these two approaches is carried out using a part of the Barcelona water transport network., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Robust optimization based energy dispatch in smart grids considering demand uncertainty

  • Nassourou, Mohamadou
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
  • Blesa Izquierdo, Joaquim|||0000-0002-5626-3753
In this study we discuss the application of robust optimization to the problem of economic energy dispatch in smart grids. Robust optimization based MPC strategies for tackling uncertain load demands are developed. Unexpected additive disturbances are modelled by defining an affine dependence between the control inputs and the uncertain load demands. The developed strategies were applied to a hybrid power system connected to an electrical power grid. Furthermore, to demonstrate the superiority of the standard Economic MPC over the MPC tracking, a comparison (e.g average daily cost) between the standard MPC tracking, the standard Economic MPC, and the integration of both in one-layer and two-layer approaches was carried out. The goal of this research is to design a controller based on Economic MPC strategies, that tackles uncertainties, in order to minimise economic costs and guarantee service reliability of the system.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Robust adaptive simultaneous state and fault estimation for nonlinear systems: Application to an aerodynamical system

  • Buciakowski, Mariusz
  • Witczak, Marcin
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
  • Rotondo, Damiano|||0000-0002-8855-5582
  • Nejjari Akhi-Elarab, Fatiha|||0000-0001-9118-632X
© 2016 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, The paper is concerned with the task of robust adaptive fault estimation and an unknown input decoupling for nonlinear systems using a quadratic boundedness approach. In particular, the fault estimation strategy and decoupling of the unknown input is based on an unknown input observer. The above methods are used to describe a robust fault and state observer problem by a set of linear matrix inequalities, which are efficiently handled by freely available solvers. The proposed approach allows obtaining a feasible set of joint state and fault estimation errors. Based on this knowledge, the confidence intervals of the system state and actuator fault, which supports diagnostic decisions, are proposed. The final part of the paper presents an illustrative example concerning an aerodynamical twin-rotor system, which exhibits the performance of the proposed approach.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Advanced monitoring of an industrial process integrating several sources of information through a data warehouse

  • Sanz, E
  • Matey, J.L.
  • Blesa Izquierdo, Joaquim|||0000-0002-5626-3753
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
This paper presents a methodology and architecture for the advanced monitoring of an industrial process integrating several sources of information using a data warehouse (DW) that include as metadata datamart to cross technical ubications and equipments with the information given by the existing monitoring systems and the time dimension. The advanced monitoring includes functionalities that allow to diagnose faulty components and to prognose faulty situations when a problem occurs in the production process. A real car painting process is used for illustration purposes., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Fault tolerant control of uncertain dynamical systems using interval virtual actuators

  • Rotondo, Damiano|||0000-0002-8855-5582
  • Cristofaro, Andrea
  • Johansen, Tor Arne
This is the peer reviewed version of the following article: Rotondo D, Cristofaro A, Johansen TA. Fault tolerant control of uncertain dynamical systems using interval virtual actuators. Int J Robust Nonlinear Control. 2018;28:611–624, which has been published in final form at https://doi.org/10.1002/rnc.3888. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving., In this paper, a model reference fault tolerant control strategy based on a reconfiguration of the reference model, with the addition of a virtual actuator block, is presented for uncertain systems affected by disturbances and sensor noise. In particular, this paper (1) extends the reference model approach to the use of interval state observers, by considering an error feedback controller, which uses the estimated bounds for the error between the real state and the reference state, and (2) extends the virtual actuator approach to the use of interval observers, which means that the virtual actuator is added to the control loop to preserve the nonnegativity of the interval estimation errors and the boundedness of the involved signals, in spite of the fault occurrence. In both cases, the conditions to assure the desired operation of the control loop are provided in terms of linear matrix inequalities. An illustrative example is used to show the main characteristics of the proposed approach., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

An improved tool of water data analytics for flowmeters data

  • Quevedo Casín, Joseba Jokin|||0000-0002-7827-2896
  • Pesantez, José Luis
  • Espin, Santiago
  • Roquet, Jaume
  • Valero, Fernando
This paper presents an improved tool for data validation and reconstruction of flowmeters. These sensors are installed in the Catalonia regional water network from Barcelona (Spain). Here a new time series model with exogenous variable is proposed with excellent results for data validation. It is postulated that the integration of the electronics alarms, along with other tests about the daily data accumulated and a later analysis of the data reconstruction allow to improve the results of the existing tools. This is accomplished by decreasing the false alarms and missing alarms of more than 6000 hourly data retrieved from more than 200 flowmeters each day. This new tool provides reliable information daily reliable information of the state of the water network. This information could potentially contribute to optimally control and manage this large and complex water network.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Decentralized fault diagnosis using analytical redundancy relations: Application to a water distribution network

  • Gupta, Vikas
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
© 2016 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, In this paper, a decentralized fault diagnosis algorithm for large scale systems is proposed. The fault diagnosis algorithm starts with obtaining a set of ARRs (analytical redundancy relations) from the system model and available sensors. These ARRs are converted into a graph that is divided into various subgraphs using a partition algorithm. From various subgraphs, different fault signature matrices are obtained. This allows designing a decentralized fault diagnosis system by using a local diagnoser for each subsystem and a global one for coordination. Entire proposed decentralized fault diagnosis algorithm is divided into five different blocks. In order to illustratethe application of the proposed algorithm, a casestudy based on the Barcelona water network is used.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Leak localization in water distribution networks using Bayesian classifiers

  • Soldevila Coma, Adrià
  • Fernández Canti, Rosa M.|||0000-0002-9381-6601
  • Blesa Izquierdo, Joaquim|||0000-0002-5626-3753
  • Tornil Sin, Sebastián|||0000-0003-1799-2192
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
This paper presents a method for leak localization in water distribution networks (WDNs) based on Bayesian classifiers. Probability density functions for pressure residuals are calibrated off-line for all the possible leak scenarios by using a hydraulic simulator, and considering the leak size uncertainty, demand uncertainty and sensor noise. A Bayesian classifier is applied on-line to the computed residuals to determine the location of leaks in the WDN. A time horizon based reasoning combined with the Bayesian classifier is also proposed to improve the localization accuracy. Two case studies based on the Hanoi and the Nova Icària networks are used to illustrate the performance of the proposed approach. Simulation results are presented for the Hanoi case study, whereas results for a real leak scenario are shown for the Nova Icària case study., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Optimal management of barcelona water distribution network using non-linear model predictive control

  • Wang, Ye|||0000-0003-1395-1676
  • Cembrano Gennari, Gabriela|||0000-0003-1436-6022
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
  • Urrea, Maite
  • Romera Formiguera, Juli
  • Saporta, D.
  • Valero, J.G.
  • Quevedo Casín, Joseba Jokin|||0000-0002-7827-2896
© <year>. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, This paper presents a non-linear optimal control strategy for the operational management of water distribution networks (WDNs) including both flow and hydraulic head/pressure constraints. The optimal operation of WDNs should guarantee water supply with suitable pressures at all the demand nodes in the network. The challenge for non-linear model predictive control in this context is to compute control strategies for the pumps and valves in a WDN to supply the required demand while optimizing performance goals related to cost and safety. A two-layer scheme is used in order to produce set-points that can be directly sent to the actuators: on-off schedules for pumps and pressure set-points for pressures reducing valves. Finally, the results of applying the proposed control strategy to a portion of the Barcelona real WDN are provided., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Distributed fault diagnosis using minimal structurally over-determined sets: Application to a water distribution network

  • Gupta, Vikas
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
© 2016 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, Distributed fault diagnosis is becoming more and more common in industries, to diagnose faults in any large scale system. There are a lot of disadvantages using centralized fault diagnosis in large-scale systems, since in a centralized implementation all the information has to be collected in one location which is generally not possible or very difficult. Moreover, a centralized system needs a high performance centralized unit which generally in most cases is not available. Due to these difficulties in recent years distributed fault diagnosis techniques have been investigated [10]. In distributed fault diagnosis [1] [2], the global diagnoses for the complete system can be computed from the results in all agents and local diagnose is computed from the results of one agent. In distributed fault diagnosis [3] [8], a global coordination process is not necessary and each subsystem depends on a local diagnoser for local diagnosis tasks and communicating with the remaining local diagnosers until a global diagnosis is produced.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Data setup for water distribution system supervision

  • Pérez Magrané, Ramon|||0000-0002-9216-4234
  • Grau Torrent, Sergi|||0000-0003-1192-1430
  • Jimenez, Victor
  • Martínez, Xavier
  • Tomas, Ricard
The availability of on-line data coming from the water distribution systems (WDS) allows the monitoring of such critical infrastructures. Nevertheless the huge amount of data that come to the control centre implies an enormous processing challenge [4]. The use of data avoids any physical theory and relies on statistical correlations and inferences. Nevertheless the previous efforts in modelling the networks encourage the companies to fusion information coming from both sources. Models help validating data and data update these models. This paper presents the first stage of an ongoing project focused in the integration of data and models. Data are collected, harmonised and validated using the models so that they will be used in following stages of the project for the supervision of the WDS (water balance and quality). A tool is being developed in R where the different modules will be integrated., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Comparison of two non-linear model-based control strategies for autonomous vehicles

  • Alcalá, Eugenio
  • Sellart, Laura
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
  • Quevedo Casín, Joseba Jokin|||0000-0002-7827-2896
  • Saludes Closa, Jordi|||0000-0002-6666-1982
  • Vázquez, David
  • López, Antonio
This paper presents the comparison of two nonlinear model-based control strategies for autonomous cars. A control oriented model of vehicle based on a bicycle model is used. The two control strategies use a model reference approach. Using this approach, the error dynamics model is developed. Both controllers receive as input the longitudinal, lateral and orientation errors generating as control outputs the steering angle and the velocity of the vehicle. The first control approach is based on a non-linear control law that is designed by means of the Lyapunov direct approach. The second approach is based on a sliding mode-control that defines a set of sliding surfaces over which the error trajectories will converge. The main advantage of the sliding-control technique is the robustness against non-linearities and parametric uncertainties in the model. However, the main drawback of first ordersliding mode is the chattering, so it has been implemented a high order sliding mode control. To test and compare the proposed control strategies, different path following scenarios are used in simulation.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Formalism for a multiresolution time series database model

  • Llusà Serra, Aleix|||0000-0002-1682-9564
  • Vila Marta, Sebastià|||0000-0001-9069-1340
  • Escobet Canal, Teresa|||0000-0001-6090-1538
We formalise a specialised database management system model for time series using a multiresolution approach. These special purpose database systems store time series lossy compressed in a space-bounded storage. Time series can be stored at multiple resolutions, using distinct attribute aggregations and keeping its temporal attribute managed in a consistent way. The model exhibits a generic approach that facilitates its customisation to suit better the actual application requirements in a given context. The elements, the meaning of which depends on a real application, are of generic nature. Furthermore, we consider some specific time series properties that are a challenge in the multiresolution approach. We also describe a reference implementation of the model and introduce a use case based on real data., Peer Reviewed