Pasar al contenido principal

MODELOS DE COMPORTAMIENTO DEL TEJIDO OSEO INMADURO EN EL CALLO DE DISTRACCION OSEA

DPI2014-58233-P

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2014
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario UNIVERSIDAD DE SEVILLA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Comparison of methods for assigning the material properties of the distraction callus in computational models

  • Mora‐Macías, Juan
  • Giráldez-Sánchez, M. A.
  • López, Melchor
  • Domínguez, Jaime
  • Reina‐Romo, María Esther
In silico models of distraction osteogenesis and fracture healing usually assume constant mechanical properties for the new bone tissue generated. In addition, these models do not always account for the porosity of the woven bone and its evolution. In this study, finite element analyses based on computed tomography (CT) are used to predict the stiffness of the callus until 69 weeks after surgery using 15 CT images obtained at different stages of an experiment on bone transport, technique in which distraction osteogenesis is used to correct bone defects. Three different approaches were used to assign the mechanical properties to the new bone tissue. First, constant mechanical properties of the hard callus tissue and no porosity were assumed. Nevertheless, this approach did not show good correlations. Second, random variations in the elastic modulus and porosity of the woven bone were taken from previous experimental studies. Finally, the elastic properties of each element were assigned depending on gray scale in CT images. The numerically predicted callus stiffness was compared with previous in vivo measurements. It was concluded firstly that assignment depending on gray scale is the method that provides the best results and secondly that the method that considers a random distribution of porosity and elastic modulus of the callus is also suitable to predict the callus stiffness from 15 weeks after surgery. This finding provides a method for assigning the material properties of the distraction callus, which does not require CT images and may contribute to improve current in silico models., The authors gratefully acknowledge the Ministerio de Economía y Competitividad del Gobierno España (DPI2014‐58233‐P and DPI2017‐82501‐P) for research funding.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A multiscale data-driven approach for bone tissue biomechanics

  • Mora-Macías, Juan
  • Ayensa-Jiménez, J.
  • Reina‐Romo, María Esther
  • Doweidar, M. H.
  • Domínguez, J.
  • Doblaré, M.
  • Sanz-Herrera, José Antonio
The data-driven methodology with application to continuum mechanics relies upon two main pillars: (i) experimental characterization of stress–strain pairs associated to different loading states, and (ii) numerical elaboration of the elasticity equations as an optimization (searching) algorithm using compatibility and equilibrium as constraints. The purpose of this work is to implement a multiscale data-driven approach using experimental data of cortical bone tissue at different scales. First, horse cortical bone samples are biaxially loaded and the strain fields are recorded over a region of interest using a digital image correlation technique. As a result, both microscopic strain fields and macroscopic strain states are obtained by a homogenization procedure, associated to macroscopic stress loading states which are considered uniform along the sample. This experimental outcome is here referred as a multiscale dataset. Second, the proposed multiscale data-driven methodology is implemented and analyzed in an example of application. Results are presented both in the macroscopic and microscopic scales, with the latter considered just as a post-process step in the formulation. The macroscopic results show non-smooth strain and stress patterns as a consequence of the tissue heterogeneity which suggest that a preassumed linear homogeneous orthotropic model may be inaccurate for bone tissue. Microscopic results show fluctuating strain fields – as a consequence of the interaction and evolution of the microconstituents – an order of magnitude higher than the averaged macroscopic solution, which evidences the need of a multiscale approach for the mechanical analysis of cortical bone, since the driving force of many biological bone processes is local at the microstructural level. Finally, the proposed multiscale data-driven technique may also be an adequate strategy for the solution of intractable large size multiscale FE computational approaches since the solution at the microscale is obtained as a postprocessing. As a main conclusion, the proposed multiscale data-driven methodology is a useful alternative to overcome limitations in the continuum mechanical study of the bone tissue. This methodology may also be considered as a useful strategy for the analysis of additional biological or technological hierarchical multiscale materials., The authors gratefully acknowledge the support of Ministerio de Economía y Competitividad del Gobierno España, Spain through the grants DPI2014-58233-P, DPI2017-82501-P, and PGC2018-097257-B-C31; as well as Consejería de Economía y Conocimiento de la Junta de Andalucía, Spain (US-1261691, FEDER, UE).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Multiscale characterisation of cortical bone tissue

  • Sanz-Herrera, José A.
  • Mora-Macías, Juan
  • Reina-Romo, Esther
  • Domínguez, Jaime
  • Doblaré, Manuel
Multiscale analysis has become an attractive technique to predict the behaviour of materials whose microstructure strongly changes spatially or among samples, with that microstructure controlling the local constitutive behaviour. This is the case, for example, of most biological tissues-such as bone. Multiscale approaches not only allow, not only to better characterise the local behaviour, but also to predict the field-variable distributions (e.g., strains, stresses) at both scales (macro and micro) simultaneously. However, multiscale analysis usually lacks sufficient experimental feedback to demonstrate its validity. In this paper an experimental and numerical micromechanics analysis is developed with application to cortical bone. Displacement and strain fields are obtained across the microstructure by means of digital image correlation (DIC). The other mechanical variables are computed following the micromechanics theory. Special emphasis is given to the differences found in the different field variables between the micro- and macro-structures, which points out the need for this multiscale approach in cortical bone tissue. The obtained results are used to establish the basis of a multiscale methodology with application to the analysis of bone tissue mechanics at different spatial scales.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A multiscale data-driven approach for bone tissue biomechanics

  • Mora-Macías, J.
  • Ayensa-Jiménez, J.
  • Reina-Romo, E.
  • Doweidar, M.H.
  • Domínguez, J.
  • Doblaré, M.
  • Sanz-Herrera, J.A.
The data-driven methodology with application to continuum mechanics relies upon two main pillars: (i) experimental characterization of stress–strain pairs associated to different loading states, and (ii) numerical elaboration of the elasticity equations as an optimization (searching) algorithm using compatibility and equilibrium as constraints. The purpose of this work is to implement a multiscale data-driven approach using experimental data of cortical bone tissue at different scales. First, horse cortical bone samples are biaxially loaded and the strain fields are recorded over a region of interest using a digital image correlation technique. As a result, both microscopic strain fields and macroscopic strain states are obtained by a homogenization procedure, associated to macroscopic stress loading states which are considered uniform along the sample. This experimental outcome is here referred as a multiscale dataset. Second, the proposed multiscale data-driven methodology is implemented and analyzed in an example of application. Results are presented both in the macroscopic and microscopic scales, with the latter considered just as a post-process step in the formulation. The macroscopic results show non-smooth strain and stress patterns as a consequence of the tissue heterogeneity which suggest that a preassumed linear homogeneous orthotropic model may be inaccurate for bone tissue. Microscopic results show fluctuating strain fields – as a consequence of the interaction and evolution of the microconstituents – an order of magnitude higher than the averaged macroscopic solution, which evidences the need of a multiscale approach for the mechanical analysis of cortical bone, since the driving force of many biological bone processes is local at the microstructural level. Finally, the proposed multiscale data-driven technique may also be an adequate strategy for the solution of intractable large size multiscale FE2 computational approaches since the solution at the microscale is obtained as a postprocessing. As a main conclusion, the proposed multiscale data-driven methodology is a useful alternative to overcome limitations in the continuum mechanical study of the bone tissue. This methodology may also be considered as a useful strategy for the analysis of additional biological or technological hierarchical multiscale materials.