Pasar al contenido principal

REPARACION DE GRANDES DEFECTOS OSEOS: TRANSPORTE OSEO VERSUS ANDAMIAJES BIOIMPRIMIDOS PACIENTE PERSONALIZADOS

DPI2017-82501-P

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE SEVILLA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Structural optimization of 3D-printed patient-specific ceramic scaffolds for in vivo bone regeneration in load-bearing defects

  • Blázquez Carmona, Pablo
  • Sanz Herrera, José Antonio
  • Martínez Vázquez, Francisco Javier
  • Domínguez, Jaime
  • Reina Romo, Esther
Tissue engineering has recently gained popularity as an alternative to autografts to stimulate bone tissue regeneration through structures called scaffolds. Most of the in vivo experiments on long-bony defects use internally-stabilized generic scaffolds. Despite the wide variety of computational methods, a standardized protocol is required to optimize ceramic scaffolds for load-bearing bony defects stabilized with flexible fixations. An optimization problem was defined for applications to sheep metatarsus defects. It covers biological parameters (porosity, pore size, and the specific surface area) and mechanical constraints based on in vivo and in vitro results reported in the literature. The optimized parameters (59.30% of porosity, 5768.91 m−1 of specific surface area, and 360.80 μm of pore size) and the compressive strength of the selected structure were validated in vitro by means of tomographic images and compression tests of six 3D-printed samples. Divergences between the design and measured values of the optimized parameters, mainly due to manufacturing defects, are consistent with the previous studies. Using the mixed experimental-mathematical scaffold-design procedure described, they could be implanted in vivo with instrumented external fixators, therefore facilitating biomechanical monitoring of the regeneration process.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Real-Time Wireless Platform for In Vivo Monitoring of Bone Regeneration

  • Blázquez Carmona, Pablo
  • Sánchez Raya, Manuel
  • Mora Macías, Juan
  • Gómez Galán, Juan Antonio
  • Domínguez, Jaime
  • Reina Romo, Esther
For the monitoring of bone regeneration processes, the instrumentation of the fixation is an increasingly common technique to indirectly measure the evolution of bone formation instead of ex vivo measurements or traditional in vivo techniques, such as X-ray or visual review. A versatile instrumented external fixator capable of adapting to multiple bone regeneration processes was designed, as well as a wireless acquisition system for the data collection. The design and implementation of the overall architecture of such a system is described in this work, including the hardware, firmware, and mechanical components. The measurements are conditioned and subsequently sent to a PC via wireless communication to be in vivo displayed and analyzed using a developed real-time monitoring application. Moreover, a model for the in vivo estimation of the bone callus stiffness from collected data was defined. This model was validated in vitro using elastic springs, reporting promising results with respect to previous equipment, with average errors and uncertainties below 6.7% and 14.04%. The devices were also validated in vivo performing a bone lengthening treatment on a sheep metatarsus. The resulting system allowed the in vivo mechanical characterization of the bone callus during experimentation, providing a low-cost, simple, and highly reliable solution.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Comparison of methods for assigning the material properties of the distraction callus in computational models

  • Mora‐Macías, Juan
  • Giráldez-Sánchez, M. A.
  • López, Melchor
  • Domínguez, Jaime
  • Reina‐Romo, María Esther
In silico models of distraction osteogenesis and fracture healing usually assume constant mechanical properties for the new bone tissue generated. In addition, these models do not always account for the porosity of the woven bone and its evolution. In this study, finite element analyses based on computed tomography (CT) are used to predict the stiffness of the callus until 69 weeks after surgery using 15 CT images obtained at different stages of an experiment on bone transport, technique in which distraction osteogenesis is used to correct bone defects. Three different approaches were used to assign the mechanical properties to the new bone tissue. First, constant mechanical properties of the hard callus tissue and no porosity were assumed. Nevertheless, this approach did not show good correlations. Second, random variations in the elastic modulus and porosity of the woven bone were taken from previous experimental studies. Finally, the elastic properties of each element were assigned depending on gray scale in CT images. The numerically predicted callus stiffness was compared with previous in vivo measurements. It was concluded firstly that assignment depending on gray scale is the method that provides the best results and secondly that the method that considers a random distribution of porosity and elastic modulus of the callus is also suitable to predict the callus stiffness from 15 weeks after surgery. This finding provides a method for assigning the material properties of the distraction callus, which does not require CT images and may contribute to improve current in silico models., The authors gratefully acknowledge the Ministerio de Economía y Competitividad del Gobierno España (DPI2014‐58233‐P and DPI2017‐82501‐P) for research funding.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mechanical Influence of Surrounding Soft Tissue on Bone Regeneration Processes: A Bone Lengthening Study

  • Blázquez-Carmona, Pablo
  • Mora-Macías, Juan
  • Sanz-Herrera, José Antonio
  • Morgaz, Juan
  • Navarrete-Calvo, Rocío
  • Domínguez, Jaime
  • Reina‐Romo, María Esther
Bone lengthening is a bone regeneration technique with multiple clinical applications. One of the most common complications of this treatment is the lack of adaptation of the surrounding soft tissue to their extension. A better understanding of the mechanobiology of the tissues involved in distraction osteogenesis would allow better control of the clinical cases. Bone lengthening treatments were performed in vivo in the metatarsus of Merino sheep, measuring the distraction forces by means of an instrumented fixator. The tissue relaxation after distraction was analyzed in this study. A viscoelastic model was also applied to distraction data to assess the mechanical behavior of the tissues during the distraction phase. Tissue relaxation is similar to other bone regeneration processes which do not imply surrounding soft tissue extension, e.g. bone transport. The effects of this tissue on distraction forces are limited to the first minutes of distraction and elongations above 4% of the original length with the protocol applied. Moreover, the surrounding soft tissue initially loses some of its viscoelasticity and subsequently suffers strain hardening from day 5 of distraction until the end of the distraction phase, day 15. Finally, anatomical changes were also evidenced in the elongated limb of our specimens., We thank the Junta de Andalucía and the Ministerio de Economía y Competitividad from the Government of Spain for funding this research (US1261691, DPI2017-82501-P and PGC2018-097257-BC31), and the FPU Grant of one of the authors (FPU17/05361).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A multiscale data-driven approach for bone tissue biomechanics

  • Mora-Macías, Juan
  • Ayensa-Jiménez, J.
  • Reina‐Romo, María Esther
  • Doweidar, M. H.
  • Domínguez, J.
  • Doblaré, M.
  • Sanz-Herrera, José Antonio
The data-driven methodology with application to continuum mechanics relies upon two main pillars: (i) experimental characterization of stress–strain pairs associated to different loading states, and (ii) numerical elaboration of the elasticity equations as an optimization (searching) algorithm using compatibility and equilibrium as constraints. The purpose of this work is to implement a multiscale data-driven approach using experimental data of cortical bone tissue at different scales. First, horse cortical bone samples are biaxially loaded and the strain fields are recorded over a region of interest using a digital image correlation technique. As a result, both microscopic strain fields and macroscopic strain states are obtained by a homogenization procedure, associated to macroscopic stress loading states which are considered uniform along the sample. This experimental outcome is here referred as a multiscale dataset. Second, the proposed multiscale data-driven methodology is implemented and analyzed in an example of application. Results are presented both in the macroscopic and microscopic scales, with the latter considered just as a post-process step in the formulation. The macroscopic results show non-smooth strain and stress patterns as a consequence of the tissue heterogeneity which suggest that a preassumed linear homogeneous orthotropic model may be inaccurate for bone tissue. Microscopic results show fluctuating strain fields – as a consequence of the interaction and evolution of the microconstituents – an order of magnitude higher than the averaged macroscopic solution, which evidences the need of a multiscale approach for the mechanical analysis of cortical bone, since the driving force of many biological bone processes is local at the microstructural level. Finally, the proposed multiscale data-driven technique may also be an adequate strategy for the solution of intractable large size multiscale FE computational approaches since the solution at the microscale is obtained as a postprocessing. As a main conclusion, the proposed multiscale data-driven methodology is a useful alternative to overcome limitations in the continuum mechanical study of the bone tissue. This methodology may also be considered as a useful strategy for the analysis of additional biological or technological hierarchical multiscale materials., The authors gratefully acknowledge the support of Ministerio de Economía y Competitividad del Gobierno España, Spain through the grants DPI2014-58233-P, DPI2017-82501-P, and PGC2018-097257-B-C31; as well as Consejería de Economía y Conocimiento de la Junta de Andalucía, Spain (US-1261691, FEDER, UE).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Multiscale characterisation of cortical bone tissue

  • Sanz-Herrera, José A.
  • Mora-Macías, Juan
  • Reina-Romo, Esther
  • Domínguez, Jaime
  • Doblaré, Manuel
Multiscale analysis has become an attractive technique to predict the behaviour of materials whose microstructure strongly changes spatially or among samples, with that microstructure controlling the local constitutive behaviour. This is the case, for example, of most biological tissues-such as bone. Multiscale approaches not only allow, not only to better characterise the local behaviour, but also to predict the field-variable distributions (e.g., strains, stresses) at both scales (macro and micro) simultaneously. However, multiscale analysis usually lacks sufficient experimental feedback to demonstrate its validity. In this paper an experimental and numerical micromechanics analysis is developed with application to cortical bone. Displacement and strain fields are obtained across the microstructure by means of digital image correlation (DIC). The other mechanical variables are computed following the micromechanics theory. Special emphasis is given to the differences found in the different field variables between the micro- and macro-structures, which points out the need for this multiscale approach in cortical bone tissue. The obtained results are used to establish the basis of a multiscale methodology with application to the analysis of bone tissue mechanics at different spatial scales.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A multiscale data-driven approach for bone tissue biomechanics

  • Mora-Macías, J.
  • Ayensa-Jiménez, J.
  • Reina-Romo, E.
  • Doweidar, M.H.
  • Domínguez, J.
  • Doblaré, M.
  • Sanz-Herrera, J.A.
The data-driven methodology with application to continuum mechanics relies upon two main pillars: (i) experimental characterization of stress–strain pairs associated to different loading states, and (ii) numerical elaboration of the elasticity equations as an optimization (searching) algorithm using compatibility and equilibrium as constraints. The purpose of this work is to implement a multiscale data-driven approach using experimental data of cortical bone tissue at different scales. First, horse cortical bone samples are biaxially loaded and the strain fields are recorded over a region of interest using a digital image correlation technique. As a result, both microscopic strain fields and macroscopic strain states are obtained by a homogenization procedure, associated to macroscopic stress loading states which are considered uniform along the sample. This experimental outcome is here referred as a multiscale dataset. Second, the proposed multiscale data-driven methodology is implemented and analyzed in an example of application. Results are presented both in the macroscopic and microscopic scales, with the latter considered just as a post-process step in the formulation. The macroscopic results show non-smooth strain and stress patterns as a consequence of the tissue heterogeneity which suggest that a preassumed linear homogeneous orthotropic model may be inaccurate for bone tissue. Microscopic results show fluctuating strain fields – as a consequence of the interaction and evolution of the microconstituents – an order of magnitude higher than the averaged macroscopic solution, which evidences the need of a multiscale approach for the mechanical analysis of cortical bone, since the driving force of many biological bone processes is local at the microstructural level. Finally, the proposed multiscale data-driven technique may also be an adequate strategy for the solution of intractable large size multiscale FE2 computational approaches since the solution at the microscale is obtained as a postprocessing. As a main conclusion, the proposed multiscale data-driven methodology is a useful alternative to overcome limitations in the continuum mechanical study of the bone tissue. This methodology may also be considered as a useful strategy for the analysis of additional biological or technological hierarchical multiscale materials.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Data-Driven Computational Simulation in Bone Mechanics

  • Sanz-Herrera, J.A.
  • Mora-Macías, J.
  • Ayensa-Jiménez, J.
  • Reina-Romo, E.
  • Doweidar, M.H.
  • Domínguez, J.
  • Doblaré, M.
The data-driven approach was formally introduced in the field of computational mechanics just a few years ago, but it has gained increasing interest and application as disruptive technology in many other fields of physics and engineering. Although the fundamental bases of the method have been already settled, there are still many challenges to solve, which are often inherently linked to the problem at hand. In this paper, the data-driven methodology is applied to a particular problem in tissue biomechanics, a context where this approach is particularly suitable due to the difficulty in establishing accurate and general constitutive models, due to the intrinsic intra and inter-individual variability of the microstructure and associated mechanical properties of biological tissues. The problem addressed here corresponds to the characterization and mechanical simulation of a piece of cortical bone tissue. Cortical horse bone tissue was mechanically tested using a biaxial machine. The displacement field was obtained by means of digital image correlation and then transformed into strains by approximating the displacement derivatives in the bone virtual geometric image. These results, together with the approximated stress state, assumed as uniform in the small pieces tested, were used as input in the flowchart of the data-driven methodology to solve several numerical examples, which were compared with the corresponding classical model-based fitted solution. From these results, we conclude that the data-driven methodology is a useful tool to directly simulate problems of biomechanical interest without the imposition (model-free) of complex spatial and individually-varying constitutive laws. The presented data-driven approach recovers the natural spatial variation of the solution, resulting from the complex structure of bone tissue, i.e. heterogeneity, microstructural hierarchy and multifactorial architecture, making it possible to add the intrinsic stochasticity of biological tissues into the data set and into the numerical approach.