Pasar al contenido principal

PREPARACION DE ANODOS DE GRAFITO PARA BATERIAS DE ION LITIO A PARTIR DE NANOFIBRAS DE CARBONO PROCEDENTES DE LA DESCOMPOSICION CATALITICA DE GAS NATURAL

ENE2008-06516-C03-03

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2008
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hydrocolloids as binders for graphite anodes of lithium-ion batteries

  • Cuesta Pedrayes, Nuria
  • Ramos, Alberto
  • Cameán Martínez, Ignacio
  • Antuña-Nieto, Cristina
  • García Suárez, Ana Beatriz
A series of seven different hydrocolloids are tested as water-soluble binders for synthetic graphite (SG)-based electrodes of lithium-ion batteries (LIBs) and compared with the standard poly(vinylidene difluoride) (PVDF) binder. The hydrocolloids selected are sodium carboxymethyl cellulose (Na-CMC), sodium alginate (Na-Alg), gum arabic (GA), xanthan gum (XG), guar gam (GG), agar-agar (AA) and carrageenan (CAR), the latter three with no precedents in the literature. They all show thermal and electrochemical stability under the experimental conditions employed. For SG/hydrocolloid electrodes, binder concentrations of 5 wt% are found to be optimal, providing outstanding electrochemical performances for electrodes with Na-Alg Na-CMC, XG and GG in galvanostatic cycling experiments at constant (C/10, with C = 372 mAg<sup>-1</sup>) and variable (from C/10 to 2C) current rates, which are comparable, or even superior to those of SG/PVDF electrodes with higher binder content (8 wt%). In contrast, SG/GA, SG/CAR and SG/AA electrodes show poorer electrochemical performances, most likely owing to the low adhesion capacity of the binder (GA and CAR), or the formation of films covering the SG particles (CAR and AA)., Financial support from the Spanish Ministry of Economy and Competitiveness MINECO (under Projects ENE2008-06516 and ENE2011-28318) is gratefully acknowledged. A. Ramos and N. Cuesta, respectively, thank the Spanish Research Council for Scientific Research (CSIC) for a JAE-Doc contract, co-funded by the European Social Fund (ESF), and the Spanish Ministry of Economy and Competitiveness (MINECO) for a pre-doctoral grant (BES-2012-052711)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Graphitized stacked-cup carbon nanofibers as anode materials for lithium-ion batteries

  • Ramos, Alberto
  • Cameán Martínez, Ignacio
  • Cuesta Pedrayes, Nuria
  • García Suárez, Ana Beatriz
The electrochemical performance as anodes in lithium-ion batteries (LIBs) of graphitized stacked-cup carbon nanofibers (CNFs) with different degree of structural order is investigated by galvanostatic cycling. To this end, two types of commercial CNFs (PR19 and PR24) bearing this microstructure were heat treated in the range of 1800-2800°C. The discharge capacity provided at the end of cycling, the capacity retention along cycling (cyclability) and the cycling efficiency (charge capacity/discharge capacity) of these nanomaterials improve significantly after heat treatment. Specifically, a progressive increase of the discharge capacity with the growth of the crystallites sizes (L<inf>c</inf>, L<inf>a</inf>) and the decrease of the structural defects (I<inf>D</inf>/I<inf>t</inf>) is observed. All heat-treated CNFs exhibit cyclabilities > 80% after 50 cycles and efficiencies > 90%. Particularly outstanding is the performance of PR19-2800 which provides a discharge capacity of 295 mAh g<sup>-1</sup> with capacity retention up to 88%. The CNFs heat treated at 2800°C also show good rate capabilities, keeping reversible capacities > 200 mAh g<sup>-1</sup> at a 2C (744 mA g<sup>-1</sup>) rate, and > 100 mAh g<sup>-1</sup> after prolonged cycling (500 cycles) at a 1C rate, clearly outperforming synthetic graphite having micrometric particle size and much larger development of the crystalline structure., Financial support from the Spanish Ministry of Economy and Competitiveness MINECO (under Projects ENE2008-06516 and ENE2011-28318) is gratefully acknowledged. A. Ramos and N. Cuesta, respectively, thank the Spanish Research Council for Scientific Research (CSIC) for a JAE-Doc contract, co-funded by the European Social Fund (ESF), and the Spanish Ministry of Economy and Competitiveness (MINECO) for a pre-doctoral grant (BES-2012-052711)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The graphitization of carbon nanofibers produced by catalytic decomposition of methane: Synergetic effect of the inherent Ni and Si

  • García Suárez, Ana Beatriz
  • Cameán Martínez, Ignacio
  • Pinilla Ibarz, José Luis
  • Suelves Laiglesia, Isabel
  • Lázaro Elorri, María Jesús
  • Moliner, Rafael
The catalytic effect of the inherent Ni and Si on the graphitization of carbon nanofibers produced by catalytic decomposition of methane is reported. The participation of the inherent Ni and Si metals as co-catalysts in the graphitization of the carbon nanofibers through the formation of Ni <inf>2</inf>Si and SiC was inferred. Taking advantage of this catalytic effect, graphite materials showing structural characteristics comparable to oil-derived graphites which are employed in several industrial applications have been prepared from the carbon nanofibers. Unlike SiC which is further descomposed to graphite, the role of Ni<inf>2</inf>Si remains unclear. At the CNFs heat treatment temperatures employed, Ni<inf>2</inf>Si is in a liquid state where the carbon can be dissolved to form a supersaturated solution from which the SiC can be produced by segregation, thus being an intermediate stage in the catalytic graphitization of the carbon nanofibers. Further work are currently in progress to go insight this issue. © 2010 Elsevier Ltd. All rights reserved., Financial support from the Spanish Ministry of Science and Innovation (under Projects MAT2004-01094 and ENE2008-06516) is gratefully acknowledged. I. Cameán thanks MCINN for a personal grant to develop the work., Peer reviewed